@article{WestersNierhoffSchneider2026, author = {Westers, Daniel and Nierhoff, Thomas and Schneider, Andreas}, title = {Degradationsanalyse von Photovoltaikmodulen - Eine Langzeitstudie an der Westf{\"a}lischen Hochschule Gelsenkirchen}, editor = {Direktorium des Westf{\"a}lischen Energieinstituts,}, issn = {3053-3007 (eISSN)}, doi = {10.82307/srwei.vi2}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49309}, pages = {36}, year = {2026}, abstract = {Photovoltaikmodule unterliegen im Betrieb verschiedenen Degradationsmechanismen, die zu Leistungsverlusten f{\"u}hren. Diese Studie[1] untersucht die tats{\"a}chliche Degradation ausgew{\"a}hlter Solarmodule der Photovoltaikanlage an der Westf{\"a}lischen Hochschule Gelsenkirchen {\"u}ber einen Zeitraum von bis zu 23 Jahren[2]. Ziel ist es, die Langzeitstabilit{\"a}t verschiedener Modultechnologien unter realen Betriebsbedingungen zu evaluieren und Aussagen {\"u}ber die Qualit{\"a}t der Degradation zu treffen. Die Untersuchung umfasst PV-Installationen mit kristallinen Modulen (mono- und polykristallin), D{\"u}nnschichtmodulen (amorphes und mikrokristallines Silizium) sowie innovativen Heterojunction-Modulen (Sanyo HIT). Nach Auswertung der Ertragsdaten und Performance Ratio wurden zehn Module aus den einzelnen Anlagen selektiert und im Solarlabor mittels Sonnensimulator unter Standard-Testbedingungen (STC) vermessen. Erg{\"a}nzende Elektrolumineszenz- und Thermographie-Analysen erm{\"o}glichten die Identifikation von Mikrodefekten, Zellrissen und Hot-Spots. Die Ergebnisse bezogen auf die Laborleistungsmessung zeigen Degradationsraten zwischen 0,16\% und 0,65\% pro Jahr, abh{\"a}ngig von der Modultechnologie. Polykristalline PeakonP-Module weisen durchschnittliche Verluste von 0,53\% j{\"a}hrlich auf. Monokristalline Solon Black 230 Module zeigen geringere Degradation (0,37\% p.a.), w{\"a}hrend r{\"u}ckseitenkontaktierte Solon Black 280 Module geringe Werte erreichen (0,16\% p.a.). Heterojunction-Module (Sanyo HIT) zeigen eine Degradation von 0,64\% p.a. Die Hauptdegradationsursachen sind lichtinduzierte Degradation (LID), potentialinduzierte Degradation (PID), Zellrisse und Delaminationen. Die meisten Module erf{\"u}llen oder {\"u}bertreffen die Herstellergarantien von 90\% nach 10 Jahren. [1] Die in diesem Beitrag pr{\"a}sentierten Ergebnisse basieren auf der Bachelorarbeit von Daniel Westers, die im FB 2 (Lehreinheit Elektrotechnik) der Westf{\"a}lischen Hochschule im Jahr 2021 im Solarlabor unter Betreuung von Prof. Dr. Andreas Schneider durchgef{\"u}hrt wurde. [2] Alle zeitlichen Angaben in dieser Arbeit beziehen sich auf das Jahr der Bearbeitung der Bachelorarbeit.}, language = {de} } @article{CoesterAnderlePohlmann2025, author = {Coester, Ulla and Anderle, Laura and Pohlmann, Norbert}, title = {Trustworthiness needs for the use of AI solutions in business}, series = {Interaction Studies}, volume = {December 2025}, journal = {Interaction Studies}, number = {Volume 26, Issue 2}, publisher = {John Benjamins Publishing Company}, issn = {1572-0373 (Print)}, doi = {10.1075/is.24051.coe}, pages = {298 -- 325}, year = {2025}, abstract = {Using AI adequately is necessary for user companies to remain competitive. Studies show that nevertheless many companies are hesitant in this regard. In relation to the assumption that people's ability to act is influenced by a lack of trust, particularly in the context of AI, we conducted a study as part of the TrustKI research project to analyze which factors are relevant to documenting trustworthiness in the context of AI. Our evaluation revealed that users demand holistic transparency; the provision of relevant information on the AI solution and proof of technical expertise is not sufficient to build trust, but there is a demand from users for specific information about the respective company. Based on the generally recognized components, we were able to identify further dimensions to provide the required information even more precisely. Thus, the study allows us to propose a preliminary set of information requirements for AI providers.}, language = {en} } @article{ThiemKiesslingSuelzenbrueck2025, author = {Thiem, Verena Katharina and Kiessling, Claudia and S{\"u}lzenbr{\"u}ck, Sandra}, title = {Zugeh{\"o}rigkeit und mentale Gesundheit im Studium: Eine qualitative Studie zu Studierenden mit Migrationshintergrund}, series = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, volume = {2026}, journal = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, number = {1}, publisher = {Springer}, doi = {10.1007/s11553-026-01294-z}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49170}, pages = {6}, year = {2025}, abstract = {Hintergrund Studierende mit Migrationshintergrund berichten h{\"a}ufiger {\"u}ber ein geringeres Zugeh{\"o}rigkeitsgef{\"u}hl („sense of belonging"), verbunden mit h{\"o}herem Stress und erh{\"o}hter Abbruchneigung. Trotz dieser Relevanz liegen im deutschsprachigen Raum bislang kaum qualitative Untersuchungen zu diesem Thema vor. Ziel der Studie war es, das subjektive Zugeh{\"o}rigkeitserleben von Studierenden mit Migrationshintergrund zu rekonstruieren und dessen Bedeutung f{\"u}r die mentale Gesundheit zu analysieren. Methodik Die Untersuchung folgte einem qualitativ-explorativen, Community-basierten Design. An einer Hochschule f{\"u}r angewandte Wissenschaften im Ruhrgebiet wurden 28 Peer-Interviews mit Studierenden mit Migrationshintergrund gef{\"u}hrt. Die Auswertung erfolgte mittels strukturierender qualitativer Inhaltsanalyse nach Kuckartz, theoretisch gerahmt durch die Social-identity-Theorie (Social-cure-Ansatz), den „Social Determinants of Health"-Ansatz und das „Study Demands-Resources"-Modell. Ergebnisse Zugeh{\"o}rigkeit erwies sich als zentrale Ressource f{\"u}r psychische Gesundheit. Fehlende Zugeh{\"o}rigkeit war mit emotionaler Ersch{\"o}pfung, Demotivation und psychosomatischen Symptomen assoziiert, w{\"a}hrend erlebte Zugeh{\"o}rigkeit als Puffer- und Aktivierungsfaktor wirkte. Hochschulische Kommunikationskultur, soziale Dynamiken unter Studierenden sowie strukturelle Ungleichheiten beeinflussten das Zugeh{\"o}rigkeitserleben maßgeblich. Schlussfolgerung Zugeh{\"o}rigkeit stellt eine sozial und institutionell gestaltbare Gesundheitsdeterminante dar. Maßnahmen der Gesundheitsf{\"o}rderung sollten strukturelle, soziale und organisationale Bedingungen in den Blick nehmen, die Zugeh{\"o}rigkeit st{\"a}rken, etwa durch transparente Regeln, wertsch{\"a}tzende Kommunikation und inklusive Lernumgebungen.}, language = {de} } @article{ViereggeSutterSuelzenbrueck, author = {Vieregge, Jaqueline and Sutter, Christine and S{\"u}lzenbr{\"u}ck, Sandra}, title = {Steigerung der Arbeitszufriedenheit durch die Ber{\"u}cksichtigung von Hochsensibilit{\"a}t in modernen Arbeitsumgebungen}, series = {Wirtschaftspsychologie. Gesundheit in der Arbeitswelt}, volume = {2025-3}, journal = {Wirtschaftspsychologie. Gesundheit in der Arbeitswelt}, number = {27}, publisher = {Pabst Science Publishers}, address = {Lengerich}, doi = {10.2440/004-0069}, pages = {306 -- 321}, abstract = {Sensory Processing Sensitivity (SPS; Hochsensibilit{\"a}t) ist durch eine erh{\"o}hte Empfindlichkeit gegen{\"u}ber Umweltreizen - sowohl positiven als auch negativen Reizen - gekennzeichnet. Aktuelle Studien identifizieren zwei Facetten des Konstrukts: Vantage-Sensitivit{\"a}t (repr{\"a}sentiert durch {\"a}sthetische Sensitivit{\"a}t) und Vulnerable-Sensitivit{\"a}t (bestehend aus niedriger sensorischer Schwelle und leichter Erregbarkeit) (Pluess \& Belsky, 2013; Wyrsch, 2020). Seit der wegweisenden Studie von Aron und Aron (1997) konzentrierte sich der Großteil der empirischen Forschung auf die allgemeinen Merkmale von Hochsensibilit{\"a}t, insbesondere auf die negativen Konsequenzen (Greven et al., 2019). Nur wenige Studien untersuchten die Hochsensibilit{\"a}t im organisatorischen Kontext und ber{\"u}cksichtigten dabei auch die positiven Effekte von Hochsensibilit{\"a}t. Basierend auf dem Job-Characteristics-Modell von Hackman und Oldham (1976) schließen wir diese Forschungsl{\"u}cke, indem wir moderierende Effekte der Hochsensibilit{\"a}t auf die Zusammenh{\"a}nge zwischen den Arbeitsmerkmalen Autonomie und Aufgabenvielfalt auf die Arbeitszufriedenheit als organisationale Outcome-Variable untersuchen. Wir nehmen positive Korrelationen zwischen Arbeitsmerkmalen und der Arbeitszufriedenheit sowie einen positiven moderierenden Effekt von Hochsensibilit{\"a}t auf diesen Zusammenhang an. Die Ergebnisse unserer Studie (N = 719) best{\"a}tigen, dass die Hochsensibilit{\"a}t die Beziehung zwischen Autonomie und Arbeitszufriedenheit positiv moderiert. Gleichzeitig fanden wir jedoch auch negative Zusammenh{\"a}nge zwischen vulnerabler Sensitivit{\"a}t und Arbeitszufriedenheit. Hinsichtlich der Aufgabenvielfalt konnten moderierende Effekte ausschließlich f{\"u}r die Vantage-Sensitivit{\"a}t festgestellt werden. Die Ergebnisse verdeutlichen, dass sich die Zufriedenheit der Mitarbeitenden und gleichzeitig die Performance des Unternehmens verbessert werden k{\"o}nnen,n wenn moderne Arbeitsumgebungen Pers{\"o}nlichkeitseigenschaften wie Hochsensibilit{\"a}t im Arbeitsumfeld ber{\"u}cksichtigen.}, language = {de} } @article{GanserRuehmkorf2025, author = {Ganser, Alina and R{\"u}hmkorf, Andreas}, title = {ESG in Germany: From the European Green Deal to the Supply Chain Due Diligence Act}, series = {Amicus curiae : the journal of the Society for Advanced Legal Studies, Series 2}, volume = {6}, journal = {Amicus curiae : the journal of the Society for Advanced Legal Studies, Series 2}, number = {3}, issn = {2048-481X}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49184}, pages = {695 -- 718}, year = {2025}, abstract = {This article discusses the trend towards environmental, social and governance (ESG)-related laws in Germany in the context of Germany's membership of the European Union (EU). As an EU member state, Germany is subject to a wave of recent directives and regulations that the EU passed as part of its so-called "European Green Deal". However, Germany also has its own tradition of promoting the goal of sustainability in the law, including company law. The article first distinguishes relevant terminology as some regulations refer to ESG, whereas others to "sustainability". It then traces the historic development of such laws in German law, including the traditional debate about the interest of the company in German law. This discussion is followed by a case study that critically examines the German Supply Chain Due Diligence Act of 2021 that continues to be subject to heated political discussions. The article demonstrates how ESG has, in recent years, become a compliance issue in Germany that is now a matter of consideration for boards.}, language = {en} } @article{BrandUtuSirbuetal.2025, author = {Brand, Marco and Utu, Ion-Dragos and Sirbu, Nicusor-Alin and Perianu, Ion-Aurel and Predu, Denis Andrei and Marginean, Gabriela}, title = {Microstructural Characteristics of Graded Ni-Fe Coatings Fabricated Through DED-L}, series = {Materials (Special Issue Advanced Coating Research for Metal Surface Protection)}, volume = {2026}, journal = {Materials (Special Issue Advanced Coating Research for Metal Surface Protection)}, number = {19 (2)}, publisher = {MDPI}, issn = {1996-1944}, doi = {10.3390/ma19020271}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49138}, pages = {18}, year = {2025}, abstract = {Directed Energy Deposition-Laser (DED-L) enables high-performance coatings through melting and successive powder deposition. Its compositional flexibility suits functionally graded layers that enhance corrosion and wear resistance. This study aimed to improve parameters for producing dense, defect-free, graded Ni- and Fe-based coatings by varying the scanning speed and deposition strategy (monodirectional versus bidirectional, with/without layer rotation), while keeping the power and hatch distance constant. Laser and electron microscopy were used to link parameters to porosity and uniformity. Optimal settings minimized pores, improved interlayer bonding and preserved geometry; inadequate parameters yielded porous, irregular deposits. A bidirectional path with 90° rotation appeared best. Ongoing research activities are needed to assess its properties. Highlights What are the main findings? - Bidirectional samples show fewer pores than samples with monodirectional movement. - Increasing the scanning speed leads to lower porosity (bidirectional scanning mode with 90° layer rotation). - Bidirectional deposition with 90° layer rotation exhibits best quality What are the implications of the main findings? - Systematic study of scanning speed and deposition strategy. - Practical guidance for process improvement of graded metal coatings; properties under evaluation. - Functionally graded Ni-Fe coatings fabricated by DED-L with tailored microstructures.}, language = {en} } @article{RoutKentschDohmenetal.2025, author = {Rout, Surya Snata and Kentsch, Ulrich and Dohmen, Ralf and Traeger, Franziska and Das, Swarna Prava and Becker, Hans-Werner and Facsko, Stefan and Ritter, Martin}, title = {High-temperature He+ Irradiation of Low-iron-bearing Olivine: Laboratory Simulations of Space Weathering on Mercury}, series = {The Planetary Science Journal}, volume = {2025}, journal = {The Planetary Science Journal}, number = {Volume 6, Number 11}, editor = {American Astronomical Society,}, publisher = {IOP Publishing}, issn = {2632-3338}, doi = {10.3847/PSJ/ae172f}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49120}, pages = {9}, year = {2025}, abstract = {The surface of Mercury is highly space weathered, and the products of space weathering are different than on the Moon. Here we simulate the interaction of solar wind ions with the surface of Mercury by implanting low-iron-bearing (∼3 wt\% Fe) olivine slices with 4 keV He+ ions both under ambient conditions and at 450 °C during the irradiation. The sample irradiated under ambient conditions shows a ∼140 nm thick partially amorphous layer on top of the grain with high concentrations of bubbles and cavities. However, the sample irradiated at 450 °C has a 110-140 nm thick polycrystalline layer with 1-5 nm sized nanoparticles of metallic iron and no bubbles or cavities. Mg atoms are preferentially sputtered from the ion-damaged layer present on the sample irradiated under ambient conditions, but no difference in composition is seen between the crystalline olivine and the ion-damaged layer in the sample irradiated at 450 °C. In addition, a thin amorphous film deposited on a micro-electromechanical systems-based chip is heated up to 1200 °C in situ inside a transmission electron microscope for a few milliseconds, and it produced nanoparticles of size 5-30 nm. Our results show that solar wind irradiation of low-iron-bearing olivine in the equatorial regions of Mercury will produce nanoparticles of iron whose sizes will be larger than that on the surface of the Moon and that the size will further increase during impacts of dust particles. Solar-wind-implanted He can diffuse out of regolith grains and can be a source of He observed in the exosphere of Mercury.}, language = {en} } @article{Bergmans2025, author = {Bergmans, Bernhard}, title = {Merkmale und Einflussfaktoren des Studienerfolgs in wirtschaftsjuristischen Bachelor-Studieng{\"a}ngen. Eine empirische Untersuchung}, series = {ReWir - Recklingh{\"a}user Beitr{\"a}ge zu Recht und Wirtschaft}, volume = {2025}, journal = {ReWir - Recklingh{\"a}user Beitr{\"a}ge zu Recht und Wirtschaft}, number = {70}, editor = {Bergmans, Bernhard and Marquardt, Ralf-Michael}, publisher = {Logos Verlag}, address = {Berlin}, issn = {2191-866X}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49114}, pages = {34}, year = {2025}, abstract = {Der Aufsatz untersucht anhand empirischer Daten zu ca. 400 Studierenden wirtschaftsjuristischer Bachelor-Studieng{\"a}nge an der Westf{\"a}lischen Hochschule eine Reihe etablierter und neuer Indikatoren f{\"u}r den Studienerfolg. Insbesondere schulnotenbezogene Pr{\"a}diktoren erweisen sich dabei als nur noch bedingt aussagef{\"a}hig, andere bekannte (insbes. Motivationslevel) und neue (insbes. Berufsausbildung vor dem Studium) erweisen sich als verl{\"a}ssliche, wenn auch nicht starke Pr{\"a}diktoren.}, language = {de} } @article{OtterpohlNalbachPaladinoetal.2025, author = {Otterpohl, Florian and Nalbach, Peter and Paladino, Elisabetta and Falci, Giuseppe A. and Thorwart, Michael}, title = {Quantum 1/f^η noise induced relaxation in the spin-boson model}, series = {Physical Review Research}, volume = {2025}, journal = {Physical Review Research}, number = {7}, publisher = {American Physical Society}, issn = {2643-1564}, doi = {10.1103/t87m-7pwn}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49035}, pages = {6}, year = {2025}, abstract = {We extend the spin-boson model of open quantum systems to the regime of quantum 1/𝑓^𝜂 noise characterized by negative exponents of its spectral distribution. Using the numerically exact time-evolving matrix product operator, we find the dynamic regime diagram, including pseudocoherent dynamics controlled by quantum 1/𝑓^𝜂 noise. We determine the dephasing rate and find for it an empirical formula valid at zero temperature. The bath reorganization energy depends on the infrared bath cutoff frequency, revealing an increased sensitivity of the dephasing on the measurement time of an experiment. Our results apply to a qubit as an elementary building block of a quantum computer and pave the way toward a quantum treatment of low-frequency noise in more complex architectures.}, language = {en} } @article{PattynSciacquaKwiedoretal.2022, author = {Pattyn, Cedric and Sciacqua, Dario and Kwiedor, Lukas and Jagodar, Andrea and Strunskus, Thomas and Traeger, Franziska and Lecas, Thomas and Kovacevic, Eva and Berndt, Johannes}, title = {Controlled deposition of plasma-polyaniline thin film by PECVD: Understanding the influence of aniline to argon ratio}, series = {Plasma Processes and Polymers}, volume = {2022}, journal = {Plasma Processes and Polymers}, number = {Volume 19, Issue 5}, publisher = {Wiley-VCH}, issn = {1612-8869}, doi = {10.1002/ppap.202100233}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49095}, pages = {10}, year = {2022}, abstract = {Low pressure capacitively coupled radiofrequency plasmas operated in a mixture of aniline vapor and argon are used for the deposition of thin films on silicon substrates. The influence of the aniline vapor fraction in the gas mixture upon the plasma properties and the characteristics of the deposited thin film is analyzed. Plasmas diagnostics are carried out using mass spectrometry and optical emission spectroscopy and the thin films are characterized by means of Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine-structure spectroscopy. Experiments highlight that the use of a low aniline/argon ratio leads to the deposition of an amorphous film whereas high-aniline/argon ratios allow the synthesis of a plasma polymer similar to polyaniline. The properties of such plasmas and the mechanisms involved in the deposition process are discussed in detail.}, language = {en} }