621 Angewandte Physik
Refine
Document Type
- Article (46)
- Conference Proceeding (40)
- Article in a Periodical of the TH Wildau (15)
- Book (3)
- Preprint (2)
- Part of a Book (1)
- Doctoral Thesis (1)
Year of publication
Institute
Has Fulltext
- yes (108)
Keywords
- nanoindentation (3)
- water adsorption (3)
- Carbon (2)
- Simulation (2)
- hardness (2)
- photonic integrated circuits (2)
- renewable energies (2)
- thermal adsorption storage (2)
- zeolites (2)
- 365 nm (1)
Renewable energy sources are more important today than ever before, as they represent a key factor in reducing greenhouse emissions and fossil fuel consumption. Avoiding excessive burdens on future generations has now become the declared challenge of this century and justifies the efforts we must undertake to reduce global warming. This can only be achieved by conceiving new technical approaches, exploiting alternative resources and by raising people's awareness of the sustainable use of their own livelihoods. However, this change in awareness is a process that needs to be driven forward, especially in the field of research and education, and is therefore the declared aim of the Joint German-West African Conference on Sustainable, Renewable Energy Systems – SusRES. This annual conference provides a platform for exchange between scientists, students and many other interested parties, with technological progress at the forefront of the event. The SusRES conference is known as an accelerator for an ever-growing international network, not limited to the circumstances of a single country or even continent, which strives to take on and meet the global challenges of the present and future.
This year's guiding theme of the event -Decentralized systems as a key factor in clean energy production for locations with limited infrastructure- of the event is primarily based on the consideration of how the energy supply of the future is to be designed. For some years now, a paradigm shift towards decentralised energy supply has been observed, which opens up new possibilities especially in areas with weak infrastructural supply. This is not just about providing energy from renewable resources, but also about exploiting this energy we have today efficiently and sustainably, whereby intelligent and interconnected systems play an ever-increasing role.
The reader is provided with exciting insights into these topics within this conference proceedings elaborated by stakeholders from twelve time zones and four continents. In their contributions, the authors address important findings, especially from research but also from teaching, which represent an important milestone in their activities and thus make a significant contribution to our declared goals.
3D printed rotor blades for a research wind turbine: Aerodynamic and structural design and testing
(2022)
This study combines the design, the 3D printing and the testing of a small 3-bladed wind turbine rotor for research and teaching purposes. The objective is the additive manufacturing of a rotor with a radius of one meter, as an alternative to subtractive methods, such as computerized milling. The blade design is developed using freely available software packages. The aerodynamic considerations include the airfoil selection, the calculation of the blade geometry and the simulation of the ultimate load cases. The structural considerations are focussed on the printable materials, the infill structures and the retrofit of a load-carrying spar. The rotor blades are 3D printed with the BigRep One at the maker space of the TH Wildau. The structural integrity of the prototype blade is tested in terms of the ultimate root bending moments and the centrifugal forces at the HTW Berlin. The aerodynamic run-up tests are performed at the large wind tunnel of the TU Berlin measuring the power curves. The successful prototype paves the way for follow-up projects, such as open field tests and the 3D printing of larger rotor blades.
Optical-resolution photoacoustic microscopy (OR-PAM) combines high spatial resolution and strong absorption-based contrast in tissue, which has enabled structural and spectroscopic imaging of endogenous chromophores, primarily hemoglobin. Conventional piezoelectric ultrasound transducers are typically placed far away from the photoacoustic source due to their opacity, which reduces acoustic sensitivity. Optical ultrasound sensors are an alternative as their transparency allows them to be positioned close to the sample with minimal source-detector distances. In this work, a backward-mode OR-PAM system based on a planar Fabry-Pérot ultrasound sensor and coaxially aligned excitation and interrogation beams was developed. Two 3D imaging modes, using raster-scanning for enhanced image quality and continuous-scanning for fast imaging, were implemented and tested on a leaf skeleton phantom. In fast imaging mode, a scan-rate of 100,000 A-lines/s was achieved. 3D images of a zebrafish embryo were acquired in vivo in raster-scanning mode. The transparency of the FP sensor in the visible and near-infrared wavelength region makes it suitable for combined functional and molecular imaging applications using OR-PAM and multi-photon fluorescence microscopy.
Faults in industrial chiller systems can lead to higher energy consumption, increasing wear of system components and shorten equipment life. While they gradually cause anomalous system operating conditions, modern automatic fault detection models aim to detect them at low severity by using real-time sensor data. Many scientific contributions addressed this topic in the past and presented data-driven approaches to detect faulty system states. Although many promising results were presented to date, there is lack of suitable comparison studies that show the effectiveness of the proposed models by use of data stemming from different chiller systems. Therefore this study aims at detecting a suitable data-driven approach to detect faults reliable in different domains of industrial chillers. Thus, a unified procedure is developed, to train all algorithms in an identical way with same data-basis. Since most of the reviewed papers used only one dataset for training and testing, the selected approaches are trained and validated on two different datasets from real refrigeration systems. The data-driven approaches are evaluated based on their accuracy and true negative rate, from which the most suitable approach is derived as a conclusion.
To achieve climate goals and contain further global warming, it is inevitable to reduce CO2 emissions especially in energy consumption. A way to do so is by integrating renewable energy sources (RES) into an energy system’s power generation. However, there is no standard procedure to decarbonise a locally restricted system. Therefore, the various local conditions have to be analysed and taken into consideration.
The authors propose a model-based approach to decarbonise the energy system of the island Föhr, Germany. This includes various collected data sets on local conditions such as climate data and heat and power demand. The data is used to represent the island’s energy system and design a model-based solution in a simulation software.
The authors identify potentials by comparing costs and revenues by addressing the deployment of different RES technologies. One finding is that heat generation causes 91 % of CO2 emissions making it the major producer. However, with the designed solution, emissions could be reduced to a third.
In this work, a cost-effective optofluidic system is propossed and preliminary experimental results are presented. A microfluidic channel monolithically integrated into a photonic integrated circuit technology is used in conjunc- tion with a cyclo-olefin copolymer (COC) substrate to provide fluidic in- and output ports. We report on initial experimental results as well as on the simple and cost-effective fabrication of this optofluidic system by means of micro-milling.
Many photochemical or photobiological applications require the use of high power ultraviolet light sources, such as high-pressure mercury arc lamps. In addition, many photo-induced chemical, biochemical and biological applications require either a combinatorial setting or a parallel assay of multiple samples under the same environmental conditions to ensure reproducibility. To achieve this, alternative, controllable light sources, such as ultraviolet light emitting diodes (UV LEDs) with high power and spatial control are required. Preferably, LEDs are arranged in a suitable standardized 96-well microtiter plate format. We designed such an array and established the methods required for heat management and enabling stable, controllable illumination over time.
Amongst the Renewable Energy Sources (RES) contributing to the worldwide electricity production, wind energy became very important. Germany and several other countries own significant wind potentials. 2% of a country’s area can be used for wind farms, thus Germany could produce easily up to 200 TWhel yearly just onshore. However, often legal and especially financial aspects decide about the speed of development. Careful project preparation guaranteed by professional management is obligatory. Beside factors such as (i) rights to the property and (ii) electric grid connection, (iii) the sufficiency of the wind and peripheral conditions need to be known. A proper wind forecast and yield prognoses are important items. To solve these tasks, professional programs are sold on the markets. To offer a convenient alternative, authors will present software based on Excel named as WindCalc 1.5, which is still under development.
Der technische Fortschritt hat dazu geführt, dass die Kosten für das automatisierte Drucken von Emblemen, Anhängern sowie allgemein gedruckten Prototypen stark gefallen sind. Dies geschah insbesondere auch vor dem Hintergrund eines Wandels der Industrie hin zu einer modernen Industrie 4.0. In dieser Arbeit wird ein neuer Ansatz für das automatische 3D-Drucken eines Logos präsentiert, welches als Pixelgrafik vorliegt. Die vorgeschlagene Prozesskette erzeugt hierbei final den G-code zum Drucken. Dabei sind seitens des Users wenige Eingaben erforderlich.