Fachbereich Ingenieur- und Naturwissenschaften
Refine
Document Type
Year of publication
- 2016 (4) (remove)
Institute
Language
- English (4)
Has Fulltext
- yes (4)
Is part of the Bibliography
- yes (4) (remove)
Keywords
- 3D measurement (1)
- bending loss (1)
- borescope (1)
- calibration (1)
- coating material (1)
- data reduction (1)
- defect (1)
- fringing (1)
- instrumentation (1)
- interference (1)
In this work, a measurement concept based on triangulation was developed for borescopic 3D-surveying of surface defects. The integration of such measurement system into a borescope environment requires excellent space utilization. The triangulation angle, the projected pattern, the numerical apertures of the optical system, and the viewing angle were calculated using partial coherence imaging and geometric optical raytracing methods. Additionally, optical aberrations and defocus were considered by the integration of Zernike polynomial coefficients. The measurement system is able to measure objects with a size of 50 μm in all dimensions with an accuracy of ± 5 μm. To manage the issue of a low depth of field while using an optical high resolution system, a wavelength dependent aperture was integrated. Thereby, we are able to control depth of field and resolution of the optical system and can use the borescope in measurement mode with high resolution and low depth of field or in inspection mode with low resolution and higher depth of field. First measurements of a demonstrator system are in good agreement with our simulations.
In this study, we present the experimental investigations on interference patterns, such as those already reported in VIMOS-IFU, and up to now no appropriate explanation has been presented. These interference patterns are produced in multimode fibres coated with acrylate or polyimide, which is the preferred coating material for the fibres used in IFUs. Our experiments show that, under specific conditions, cladding modes interact with the coating and produce interference. Our results show that the conditions at which the fibre is held during data acquisition has an impact in the output spectrum. Altering the positioning conditions of the fibre leads to the changes into the interference pattern, therefore, fibres should be carefully manipulated in order to minimise this potential problem and improve the performance of these instruments. Finally we present a simple way of predicting and modelling this interference produced from the visible to the near infrared spectra. This model can be included in the data reduction pipeline in order to remove the interference patterns.
These results should be of interest for the optimisation of the data reduction pipelines of instruments using optical fibres. Considering these results will benefit innovations and developments of high performance fibre systems.
In this work, we present for the first time a partially slotted silicon ring resonator (PSRR) covered with an electro-optical polymer (Poly[(methyl methacrylate)-co-(Disperse Red 1 acrylate)]). The PSRR takes advantage of both a highly efficient vertical slot waveguide based phase shifter and a low loss strip waveguide in a single ring. The device is realized on 200 mm silicon-on-insulator wafers using 248 nm DUV lithography and covered with the electro-optic polymer in a post process. This silicon-organic hybrid ring resonator has a small footprint, high optical quality factor, and high DC device tunability. A quality factor of up to 105 and a DC device tunability of about 700 pm/V is experimentally demonstrated in the wavelength range of 1540 nm to 1590 nm. Further, we compare our results with state-of-the-art silicon-organic hybrid devices by determining the poling efficiency. It is demonstrated that the active PSRR is a promising candidate for efficient optical switches and tunable filters.
Integrated photonic devices have gained increasing research interests. Especially silicon photonics have become very attractive for various optical applications. Using silicon-on-insulator as a material platform provides the ability to fabricate photonic devices with electronic devices on a single chip. Driven by substantial research investments, the integration of photonic devices on silicon-on-insulator substrates has reached a degree of maturity that already permits industrial adoption. However, silicon has the disadvantage of linear electro-optical effects, and, therefore, advanced modulation formats are difficult to realize when using silicon-based high-speed modulators. Hence, a new approach was proposed: the silicon-organic hybrid technology. This technology is a viable extension of the silicon-on-insulator material system for efficient high-speed modulation. We herewith present our theoretical and experimental investigations of the silicon-organic hybrid slot-waveguide ring resonator. The advanced device design is described in detail, which allows using both, the efficient silicon-on-insulator strip-waveguides and the silicon-organic hybrid slot-waveguides in single ring resonator. For the first time, we report the transmission spectra of such a resonator covered with an electro-optical polymer.