Refine
Document Type
Institute
Has Fulltext
- yes (30)
Is part of the Bibliography
- yes (30)
Keywords
- photoacoustic (3)
- 3D measurement (2)
- Fabry-Perot (2)
- endoscope (2)
- optical constants (2)
- optoacoustic (2)
- transcranial (2)
- AFM (1)
- Backward-mode imaging (1)
- Bragg reflectors (1)
Optical-resolution photoacoustic microscopy (OR-PAM) combines high spatial resolution and strong absorption-based contrast in tissue, which has enabled structural and spectroscopic imaging of endogenous chromophores, primarily hemoglobin. Conventional piezoelectric ultrasound transducers are typically placed far away from the photoacoustic source due to their opacity, which reduces acoustic sensitivity. Optical ultrasound sensors are an alternative as their transparency allows them to be positioned close to the sample with minimal source-detector distances. In this work, a backward-mode OR-PAM system based on a planar Fabry-Pérot ultrasound sensor and coaxially aligned excitation and interrogation beams was developed. Two 3D imaging modes, using raster-scanning for enhanced image quality and continuous-scanning for fast imaging, were implemented and tested on a leaf skeleton phantom. In fast imaging mode, a scan-rate of 100,000 A-lines/s was achieved. 3D images of a zebrafish embryo were acquired in vivo in raster-scanning mode. The transparency of the FP sensor in the visible and near-infrared wavelength region makes it suitable for combined functional and molecular imaging applications using OR-PAM and multi-photon fluorescence microscopy.
Electro-optical properties of doped polymers with high transparency in the visible wavelength range
(2021)
The electro-optical (EO) properties of poly(methyl methacrylate) and the photopolymer poly(vinyl cinnamate) doped with varying concentrations of the EO chromophore 2-Methyl-4-nitroaniline were measured. The EO polymers were embedded in Fabry-Pérot etalons for the simultaneous determination of the Pockels and Kerr coefficients from measurements of the fringe shift induced by an external electric field. It was found that the host polymer has a significant impact on the EO performance and that the undoped host polymers exhibit a significant Pockels effect. Moreover, the Kerr effect provides a substantial contribution of 27% to the total change of the refractive index at relatively high electric field strengths of E = 91.2 MV m−1.
Comprehensive diagnostics is a prerequisite for the application of graphene in semiconductor technologies. Here, the authors present long-term investigations of graphene on 200-mm Ge(100)/Si(100) wafers under clean room environmental conditions. Diagnostic of graphene was performed by a fast and nondestructive metrology method based on the combination of spectroscopic ellipsometry and reflectometry (SE/R), realized within a wafer optical metrology tool. A robust procedure for unambiguous thickness monitoring of a multilayer film stack, including graphene, interface layer GeOx underneath graphene, and surface roughness is developed and applied for process control. The authors found a relationship between the quality of graphene and the growth of GeOx beneath graphene. Enhanced oxidation of Ge beneath graphene was registered as a long-term process. SE/R measurements were validated and complemented using atomic force microscopy, scanning electron microscopy, Raman spectroscopy, and secondary ion mass spectrometry. This comparative study shows a high potential for optical metrology of graphene deposited on Ge/Si structures, due to its great sensitivity, repeatability, and flexibility, realized in a nondestructive way.
Comparative Study of Nano-Slot Silicon Waveguides Covered by Dye Doped and Undoped Polymer Cladding
(2019)
Nonlinear optical dyes doped in optical polymer matrices are widely used for electro-optical devices. Linear optical properties change with dye concentration, which leads to a change in modal properties, especially in nano-structured integrated waveguides such as silicon slot-waveguides. Here, we investigate the influence of a nonlinear optical dye on the performance of a silicon-organic hybrid slot-waveguide. A simulation study of the modal and optical confinement properties is carried out and dependence of the structural parameters of the slot-waveguide and the organic cladding material is taken into account. As cladding material, a guest-host polymer system is employed comprising the nonlinear optical dye Disperse Red 1 (DR1) doped in a poly[methyl methacrylate] (PMMA) matrix. The refractive indices of doped and undoped PMMA were deduced from ellipsometric data. We present a guideline for an optimized slot-waveguide design for the fabrication in silicon-on-insulator technology giving rise to scalable, high-performance integrated electro-optical modulators.
Nanocrystalline silicon suboxides (nc-SiOx) have attracted attention during the past years for the use in thin-film silicon solar cells. We investigated the relationships between the nanostructure as well as the chemical, electrical, and optical properties of phosphorous, doped, nc-SiO0.8:H fabricated by plasma-enhanced chemical vapor deposition. The nanostructure was varied through the sample series by changing the deposition pressure from 533 to 1067 Pa. The samples were then characterized by X-ray photoelectron spectroscopy, spectroscopic ellipsometry, Raman spectroscopy, aberration-corrected high-resolution transmission electron microscopy, selected-area electron diffraction, and a specialized plasmon imaging method. We found that the material changed with increasing pressure from predominantly amorphous silicon monoxide to silicon dioxide containing nanocrystalline silicon. The nanostructure changed from amorphous silicon filaments to nanocrystalline silicon filaments, which were found to cause anisotropic electron transport.
In unserer hochtechnologisierten Gesellschaft spielt die optische Datenübertragung aufgrund der stetig wachsenden Informationsvielfalt eine immer bedeutendere Rolle. In den Anfängen der Nachrichtentechnik waren Datenraten von wenigen bit/s realisierbar. Heute werden mittels optischer Technologien Übertragungsraten von mehreren Gbit/s umgesetzt. Möglich wird dies durch neue Entwicklungen in der Chip-integrierten Photonik. Beispiele dafür sind Chip-integrierte elektrooptische Modulatoren und Schalter. In diesem Artikel werden neue Entwicklungen in der Chip-integrierten Photonik diskutiert und die experimentelle Charakterisierung der Bauelemente in Form eines Ringresonators beschrieben. Für die Experimente wird exemplarisch ein photonisches Bauelement genutzt, das aus einem hybriden Silizium-Polymer-Materialsystem besteht. Die Ergebnisse zeigen, dass diese Materialkombination vielversprechend für zukünftige Chip-integrierte photonische Bauelemente mit extrem geringem Energiebedarf ist.
Die Modenlinienspektroskopie kann zur hochpräzisen Charakterisierung von Polymerschichten bezüglich des Brechungsindex verwendet werden. Das vorliegende Manuskript behandelt die Theorie der Modenlinienspektroskopie und beginnt dabei mit den theoretischen Grundlagen eines planaren Wellenleiters, die zum Verständnis der Modenlinienspektroskopie notwendig sind. Die hier präsentierten expliziten Herleitungen können genutzt werden, um die Modenlinienspektroskopie so zu modifizieren, dass auch die Messung des Pockelseffektes möglich ist. Eine Anwendungsmöglichkeit soll in der zukünftigen Bestimmung des Pockelskoeffizienten bestehen, der für die Weiterentwicklung von polymerbasierten elektrooptischen Modulatoren benötigt wird. Zudem werden der Aufbau und die experimentelle Herangehensweisen beschrieben und die Brechungsindexbestimmung wird exemplarisch am Beispiel einer Wirt-Gast-Polymerschicht demonstriert.
Biomedical photoacoustics is usually used to image absorption-based contrast in soft tissues up to depths of several centimeters and with sub-millimeter resolution. By contrast, measuring Photoacoustic (PA) signals through hard bone tissue shows severe signal degradation due to aberration and high attenuation of high frequency acoustic signal components. This is particularly noticeable when measuring through thicker, human, skull bone. Which is the main reason why transcranial PA imaging in humans has so far proved challenging to implement. To tackle this challenge, we developed an optical resonator sensor based on a previous planar-concave design. This sensor was found to be highly suitable for measuring the low-pressure amplitude and low acoustic frequency signals that are transmitted through human cranial bone. A plano-concave optical resonator sensor was fabricated to provide high sensitivity in the acoustic frequency range of DC to around 2 MHz, a low noise equivalent pressure and a small active element size enabling it to significantly outperform conventional piezoelectric transducers when measuring PA waves transmitted through ex vivo human cranial bones.
Fabry-Pèrot (FP) interferometer sensors enable highly sensitive backward mode acoustic detection in Photoacoustic (PA) imaging. They are transparent to the excitation wavelength, can be placed directly next to the PA source, and offer a broadband frequency response and high acoustic sensitivity. PA tomography using parallelized detection requires high spatial uniformity of the optical and acoustic properties, which can be hampered by contaminations during fabrication that lead to the formation of inhomogeneities and artefacts. The quality and homogeneity of the dielectric and polymer layers have a direct effect on the maximum optical phase sensitivity, and hence acoustic sensitivity. In this study, cross-sectional images of FP sensors were obtained using focused ion beam milling and ultramicrotomy followed by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) to evaluate different fabrication methods.
Ellipsometrically obtained spectral dependences of ordinary αxy and extra-ordinary αz extinction/attenuation coefficients within the spectral range λ = 300…980 nm of uniaxially anisotropic polytetrafluoroethylene (PTFE) films were analyzed. We considered the capabilities and specific features of the graphical representation technique for determining the contribution of Rayleigh scattering and Urbach absorption to light attenuation in the spectral range beyond fundamental absorption. It has been shown that the graphical approach enables to estimate these contributions qualitatively, semi-quantitatively or quantitatively, depending on the situation. The conclusions made using the analysis of graphical representation are confirmed by numerical solution of the inverse problem via simulation of the αxy (λ), αz (λ) experimental dependences within the framework of a best-fit procedure. Being based on both of these approaches, we have ascertained that, in the as-prepared PTFE films, the so-called anomalous light scattering (ALS) with the spectral dependence of scattering coefficient αs ≈ as λ–p (p > 4) takes place. Transformation of scattering from ALS to the Rayleigh one with p ≈ 4 due to annealing is accompanied by an increase of Urbach (subband) absorption. Both of these factors cause narrowing the dynamic range of extinction coefficient values. Both scattering and absorption coefficients are higher for the component of light polarized along the normal to the substrate as compared to the component polarized in parallel to it. The relationship between observed behavior of the scattering and absorption coefficients and the film structure has been discussed.