Refine
Document Type
- Article (2)
Institute
Language
- English (2)
Has Fulltext
- yes (2)
Is part of the Bibliography
- yes (2)
Keywords
- biosensor (1)
- hetero-integration (1)
- indium Phosphide (1)
- label-free detection (1)
- micro-transfer printing (1)
- oxygen plasma activation (1)
- photonic integrated circuit (1)
- sacrificial layer (1)
- silicon oxide (1)
- surface functionalization (1)
Micro-Transfer printing (µTP) is a promising technique for hetero-integration of III-V materials into Si-based photonic platforms. To enhance the print yield by increasing the adhesion between the III-V material and Si or SiO2 surface, an adhesion promoter like Benzocyclobutene is typically used as interlayer. In this work, we demonstrate µTP of InP based coupons on SiO2 interlayer without any adhesive interlayer and investigate the mechanism of adhesive free bonding. Source coupons are InP-based coupon stacks on a sacrificial layer that is removed by a chemical wet etch with FeCl3. For the target we fabricated amorphous-Si waveguides on 8” wafer encapsulated by a High Density Plasma SiO2 which was planarized by a chemical mechanical polishing procedure. We used O2 plasma to activate both source and target to increase adhesion between coupon and substrate. To get a better understanding of the bonding mechanism we applied several surface characterization methods. Root mean square roughness of InP and SiO2 was measured by atomic force microscopy before and after plasma activation. The step height of the micro-transfer printed source coupon on the target wafer is estimated by optical step profiler. We used Raman peak position mappings of InP to analyze possible strain and contact angle measurements on SiO2, before and after plasma activation to observe a change in the hydrophilicity of the surface. X-ray Photoelectron Spectroscopy analysis was used to characterize the surface energy states of P2p, In3d, O1s for InP source and Si2p, O1s for SiO2 target. Our results demonstrate direct bonding of InP coupons by means of µTP without the need of a strain-compensation layer. In this way, a promising route towards Complementary Metal-Oxide-Semiconductor compatible use of µTP for the hetero-integration of InP is provided.
Label-free direct-optical biosensors such as surface-plasmon resonance (SPR) spectroscopy has become a gold standard in biochemical analytics in centralized laboratories. Biosensors based on photonic integrated circuits (PIC) are based on the same physical sensing mechanism: evanescent field sensing. PIC-based biosensors can play an important role in healthcare, especially for point-of-care diagnostics, if challenges for a transfer from research laboratory to industrial applications can be overcome. Research is at this threshold, which presents a great opportunity for innovative on-site analyses in the health and environmental sectors. A deeper understanding of the innovative PIC technology is possible by comparing it with the well-established SPR spectroscopy. In this work, we shortly introduce both technologies and reveal similarities and differences. Further, we review some latest advances and compare both technologies in terms of surface functionalization and sensor performance.