Refine
Document Type
Year of publication
- 2022 (4) (remove)
Institute
Has Fulltext
- yes (4)
Keywords
- 3D Printing (1)
- Bonding agent (1)
- Control technology (1)
- Marlin (1)
- Radiation Mesaurement (1)
- Rapid Prototyping (1)
- Secure Measurements (1)
- UV C LED (1)
- UV-C (1)
- Validate LED (1)
New technologies leading to better and more efficient light emitting diodes. The emitted radiation reaches higher energy levels and lower wavelengths especially in the UV-C spectrum. UV-C light has a cancer inducing effect on human cells. Therefore it is necessary to work in a safe way with those devices.
This work is focused on an open-source solution for rapid 3D printing of an safe UV-C radiation measuring device. Especially for research groups or universities which can not afford big safety labs.
After modeling and printing the prototype, a series of tests has shown the functionality of that UV-C Diode test system. By using black printing filaments and infill rates over 50 %, the transmission of light could be prevented and the system worked well.
A passive pipe sampler device for contaminant analysis in groundwater was developed which create a permanent sampling flow from groundwater and in addition to temperature, conductivity and pressure, now also has room for specific sorbents. The large surface of the adsorber offers more binding surface for the analyte and the constant movement of the sorbent with fresh groundwater also provides homogeneous binding. The spectroscopic analyses at the monitoring site of the pipe passive sampler for groundwater monitoring points enables a measurement-based validation of the sorbent circulation as an alternative to a visual assessment. The optimum pump speed for the sorbens Lewatit® M500 and SR7 was evaluated. The 42mm slim measuring device allows the use in DN50 monitoring well and thus allows the setup of a closer measuring network.
Zur Herstellung von langfristig stabilen Metall-Kautschuk-Verbunden sind chemische Haftvermittler notwendig. Nach Auftrag dieser wird Kautschuk mittels Gummispritzgießen auf die metallischen Grundkörper aufgebracht. In Klein- und Kleinstserien kann der Haftvermittler in präzisen Volumina händisch mit Hilfe eines Fluid-Dispensers aufgetragen werden. Allerdings verhindert dies eine Homogenität und Gleichheit der Schichtdicke, wodurch die Zuverlässigkeit und Stärke der Haftung variieren können. Als technische Lösung wurde ein Pipettierroboter avisiert. Mit Hilfe mehrerer mechanischer und elektrischer Adaptionen – so auch einer neuen Steuerungstechnik – wurden verschiedene Fluid-Dispenser auf 3-Achs-Portalfräsen integriert. Somit konnte die volle Funktionsfähigkeit erreicht werden.
Das Ziel dieses Projektes war es eine automatisierte Lösung für das Auftragen von Haftvermittlern auf metallische Grundkörper im Nanoliterbereich zu ermöglichen. Für die automatisierte Auftragung von Haftvermittler wurde eine neue Steuerungseinheit auf Grundlage eines Mainboards für die Ansteuerung von 3D-Druckern verwendet, als Firmware diente Marlin. Notwendig waren Anpassungen im Bereich der Motorströme, Geschwindigkeiten, Beschleunigung, Sensitivität, Druckbettgröße und Auswahl von Mainboard und Display. Für die Verfahrwege wurde G-Code mittels eines Programms in Python generiert. Für eine homogene und gleichmäßige Benetzung werden die einzelnen zu benetzenden Objekte angefahren und der Pipettiervorgang gesteuert. Es war möglich die vollständige Funktionsfähigkeit herzustellen.