Refine
Document Type
- Article (3) (remove)
Institute
Language
- English (3)
Has Fulltext
- yes (3)
Is part of the Bibliography
- yes (3) (remove)
Keywords
- 365 nm (1)
- High-power LED (1)
- LED array (1)
- Open-Source (1)
- biofabrication (1)
- bioprinting (1)
- degradation (1)
- high voltage (1)
- light (1)
- microtiter plate (1)
Many photochemical or photobiological applications require the use of high power ultraviolet light sources, such as high-pressure mercury arc lamps. In addition, many photo-induced chemical, biochemical and biological applications require either a combinatorial setting or a parallel assay of multiple samples under the same environmental conditions to ensure reproducibility. To achieve this, alternative, controllable light sources, such as ultraviolet light emitting diodes (UV LEDs) with high power and spatial control are required. Preferably, LEDs are arranged in a suitable standardized 96-well microtiter plate format. We designed such an array and established the methods required for heat management and enabling stable, controllable illumination over time.
Synthetic substances like many pharmaceuticals, preservatives or other chemical compounds are actually very difficult to handle in sewage treatment. These compounds are very stable in aqueous solution and their degradation reactions are insufficient. Therefore, to eliminate these substances from wastewater additional afford is necessary. Extreme conditions like pH value, redox potential, chemical or physical energy need to be present. With our study we try to show that the use of plasma discharge could be a solution to this problem. Using the example of methylparaben, a preservative, we could show, that the physical energy of plasma discharge is able to initialize the degradation reaction in aqueous environment. The concentration was reduced by up to 70 percent in our setting depending on the treatment duration. Overall, the system showed potential to optimize wastewater treatment. Further examinations are necessary for example regarding undesirable by-products.
Processing biological materials with 3-dimensional (3D) printers has attracted increasing interest in several research areas. At the same time, off-the-shelf solutions are increasingly available in a wider variety to meet the current market demand. However, most of the available bioprinters are closed source, thus, modifications are quite challenging or require an avoidable consultation process with the manufacturer. Furthermore, the entry prices for basic machines amount to several thousands of euros. Whereas, high-end 3D bio printers with a vast array of features are available for several hundred thousand euros. Due to the immense potential of this tool in the field of biotechnology it is important to extend the availability of this technology for research purposes in terms of adaptability and price. This ongoing work focuses on open-source 3D printer heads with the ability to extrude biological materials. The print heads include several techniques to process low as well as high viscose biomaterials such as agar and gelatin. Additionally, obstacles such as continuous substrate tempering or integration into existing 3D printers are addressed. The work presented is open source and thus freely adaptable to any user’s specific needs. Our goal is to process a diverse range of biomaterials with different print techniques.