Conception and development of a universal, cost-efficient and unmanned rescue aerial vehicle

Konzeption und Entwicklung einer universellen, kosteneffizienten und unbemannten Flugrettungsplattform

  • To this day, charities have not been able to provide individual help for people in need. The aim of the thesis was to develop and construct a universal aerial transporter which could be used to support charities in disaster scenarios. The focus was on the technical development based on the results of a feasibility study. The main requirements for the development were in particular: the lowest possible cost for acquisition and maintenance, providing an easy way of reproduction and the ability to control the system using mobile devices. The legal aspects and the collision avoidance were given less priority or were not considered. In order to identify the current capabilities of charities and their actual problems, a survey among different organisations was done. The results suggested the need for a transport solution. As suitable transport solutions already exist for goods of a mass of at least 50 kg and a transport distance of not less than 100 km, this thesis focuses on the development of a solution below that range and mass. Various other research works were considered, and it became obvious that most of the research was not concerned with the individual support in rescue operations. These findings were used to gather the requirements for the solution. Subsequently, a market research was carried out and possible solutions were compared. As it became apparent that there was no suitable solution available, it was decided to develop a new aerial vehicle. To this end every part that was needed and suitable was individually compared and selected. After the transport vehicle had been developed, the system was built. Parts which were not available, especially for the frame and the universal mounting system, were also developed and produced. In order to increase the flight time of the vehicle, materials of a very low mass were used. During the project a prototype of a universal and unmanned aerial vehicle was successfully developed and constructed. For the transport of different types of goods two different types of universal payload mounting systems were designed. The latter was capable of holding goods with a mass of up to 5 kg. The system allows control of the vehicle in a very convenient way using a mobile device like a smartphone or a tablet. No regular remote control was needed, though still being supported by the system. By means of an android application missions could be created and transmitted wirelessly to the vehicle. After the transmission the system performed the mission autonomously. Due to an insufficient stiffness of the frame, a longer flight test is still outstanding. The automatic release of the payload at the destination required an adjustment of the used application or at least a regular radio control in range. The servo motors used for the mounting system tended to yaw their arms and also required a permanent power supply. Further developments should review the use of alternative motors for the mounting system.
  • Hilfsorganisationen waren bisher nicht in der Lage, Menschen in Notsituationen individuell zu helfen. Das Ziel der Arbeit war daher, die Entwicklung und den Bau eines universellen Flugsystems zum Transport von Lasten, welches in der Lage ist, Hilfsorganisationen in Katastrophenszenarien zu unterstützen. Der Fokus lag dabei auf der Entwicklung einer technischen Lösung in Anlehnung an eine Machbarkeitsstudie. Bei der Entwicklung wurde vor allen Dingen auf möglichst niedrige Anschaffungs- und Wartungskosten, eine leichte Reproduzierbarkeit und die Möglichkeit einer sehr einfachen Steuerung geachtet. Rechtliche und Zulassungsaspekte wurden nur am Rande berücksichtigt. Ein System zur Kollisionsverhütung war nicht Bestandteil der Arbeit. Um herauszufinden, was die aktuellen Möglichkeiten und Probleme von Hilfsorganisationen sind, wurde eine Umfrage unter vielen großen Hilfsorganisationen durchgeführt. Diese sorgte dafür, dass sich die Notwendigkeit einer Transportlösung herauskristallisierte. Da die aktuelle Versorgung mit Gütern ab 50 kg und über eine Distanz von 100 km bereits sehr gut funktioniert, wurde der Fokus auf die Entwicklung einer Transportlösung unterhalb dieses Bereichs konzentriert. Viele sehr interessante Forschungsarbeiten wurden im Rahmen der Arbeit studiert, führten jedoch zu der Erkenntnis, dass sich die meisten Forschungsarbeiten nicht mit der individuellen Versorgung von Personen in Not beschäftigen. Anschließend wurden aus den gewonnenen Erkenntnissen die Anforderungen für die zu entwickelnde Lösung zusammengetragen. Um die Möglichkeit zur Nutzung einer bestehenden Lösung zu überprüfen, wurde eine Marktrecherche durchgeführt und mögliche Systeme miteinander verglichen. Dies führte zu der Erkenntnis, dass aktuell keine fertige und geeignete Lösung existiert und eine neue entwickelt und gebaut werden musste. Dafür wurden alle benötigten Teile mit aktuell verfügbaren und geeignet scheinenden Teilen verglichen und daraus ein System entwickelt. Teile, welche nicht beschaffbar waren, wurden ebenfalls neu entwickelt und selbst hergestellt. Um eine möglichst lange Flugzeit des Fluggeräts zu erreichen, wurde bei der Entwicklung ein Fokus auf die Verwendung von Leichtbaumaterialien gelegt.

Download full text files

Export metadata

Additional Services

Search Google Scholar Statistics
Metadaten
Author:Christoph-Benjamin Sponholz
URN:urn:nbn:de:kobv:526-opus4-5114
DOI:https://doi.org/10.15771/MA_2015_1
Advisor:Günter-Ulrich Tolkiehn, Sven Angermann
Document Type:Master's Thesis
Language:English
Year of Publication:2015
Year of first Publication:2015
Publishing Institution:Technische Hochschule Wildau
Granting Institution:Technische Hochschule Wildau
Release Date:2016/01/20
Page Number:148
Faculties an central facilities:Fachbereich Wirtschaft, Informatik, Recht
Dewey Decimal Classification:6 Technik, Medizin, angewandte Wissenschaften / 62 Ingenieurwissenschaften / 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
TH Wildau theses:Betriebswirtschaft / Wirtschaftsinformatik
Licence (German):Das Dokument ist urheberrechtlich geschützt
Verstanden ✔
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.