TY - GEN A1 - Beyer, Harald A1 - Harendt, Andreas A1 - Koschlig, Tobias A1 - Rolle, Siegfried A1 - Roß, Werner A1 - Volkmann, Hans T1 - Das Institut für Plasma- und Lasertechnik der Technischen Fachhochschule Wildau T2 - Wissenschaftliche Beiträge 2/1998 N2 - Am 31.12.1996 endete das Wissenschaftler-Integrations-Programm (WIP) in den neuen Ländern. Es war angelegt worden, um Teilen der in der Akademie der Wissenschaften der DDR arbeitenden (und mehrfach positiv evaluierten) Wissenschaftlern eine Übergangsphase zu finanzieren, in der sie einerseits ihre Arbeit kontinuierlich fortsetzen konnten und andererseits die Integration in einer Hochschule erfolgen sollte, da die Forschungslandschaft der DDR an die bundesdeutschen Strukturen anzupassen waren. Das vorab auf zwei Jahre angelegte, 1992 gestartete Programm konnte bis 1996 verlängert werden, wenn es gelang, eine Hochschule zu finden, die bekundete, an einer Integration dieser Wissenschaftler in ihrer Einrichtung interessiert zu sein. Zielhochschule der Wissenschaftler in der von Prof. Dr. sc. H. Gündel gegründeten Gruppe, die sich in Fortführung ihrer langjährigen Forschungstätigkeit auf dem Gebiet der nichtthermischen Plasmen (auch Niedertemperaturplasmen), insbesondere zur Erzeugung von Laserlicht beschäftigte und auch noch beschäftigt, war die TFH Wildau. Dies war für eine Berliner Einrichtung einerseits ungewöhnlich, andererseits auch nahe: In der Gründungsphase der TFH Wildau lag ein besonderes Schwergewicht auf den modernen Technologien, was sich auch dadurch ausdrückte, daß es einen Fachbereich Physikalische Technik gab, der heute im Fachbereich Ingenieur- und Wirtschaftsingenieurwesen als Studienrichtung weiter besteht. Da sich für die Zukunft eine immer breitere, auch ingenieurmäßige Anwendung der Plasma- und Lasertechnik abzeichnet und an den Deutschen Fachhochschulen dieses Gebiet (insbesondere die Plasmatechnik) kaum in der Lehre vertreten wird, wurde von beiden Seiten - der TFH Wildau auf der einen und der sich damals noch als WIP AG Niedertemperaturplasmen bezeichnenden Gruppe aus Berlin auf der anderen - eine Integration in einem Institut für Plasma- und Lasertechnik (IPLT) der TFH Wildau im Fachbereich Physikalische Technik angestrebt. Y1 - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-7488 SN - 0949-8214 VL - 4 IS - 2 SP - 16 EP - 23 ER - TY - GEN A1 - Richter, Asta A1 - Brzezinka, Klaus-Werner T1 - Thin Film Deposition and Modification of Fullerenes by Laser Radiation T2 - Wissenschaftliche Beiträge 1/1995 N2 - Laser ablation from solid fullerene pellet and textured graphite targets has been probed for deposition of thin fullerite and diamond-like carbon (DLC) films by means of a pulsed C02 laser. Ablation of fullerene material does not yield fullerite films, but results in amorphous pregraphitic carbon structures. At very low laser flux structural transformations are observed with increasing exposure time. These thermal effects cannot completely decompose the fullerenes without increase of the laser power density. Thermal evaporation is a suitable method to deposite fullerite fllms of high quality, thus epitaxial fullerite films are grown on mica. Sandwich C60/DLC structures are produced by laser deposition which show a sharp interface as can be deduced from the superposition of the characteristic Raman spectra of the fullerite and the DLC. N2 - Mit einem gepulsten CO2-Laser wird Laserablation von festen Fullerene-Pellets und texturierten Graphittargets zur Abscheidung von dünnen Fullerite- und diamantartigen Kohlenstoffilmen (DLC) getestet. Ablation von Fullerene-Material ist nicht zur Bildung von Fullerite-Filmen geeignet, sondern es entstehen amorphe pregraphitische Kohlenstoffstrukturen. Schäden, die durch die Einwirkung des Lasers auf Fullerene verursacht werden, wurden mittels Ramanspektroskopie untersucht. Bei geringen Laserleistungsdichten werden Strukturänderungen mit wachsender Einwirkungszeit des Lasers beobachtet. Diese thermischen Effekte können das Fullerene-Material nicht vollständig umwandeln, ohne daß die Laserleistungsdichte erhöht wird. Thermische Verdampfung ist eine geeignete Methode, um Fullerite-Schichten guter Qualität abzuscheiden: so konnten epitaktische Filme auf Glimmer aufwachsen. C60/DLC-Sandwich-Strukturen werden durch Laserabscheidung hergestellt und zeigen scharfe Grenzflächen, wie aus der definierten Überlagerung der charakteristischen Ramanspektren des Fullerite- und DLC-Films abgeleitet werden kann. Y1 - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-8118 SN - 0949-8214 VL - 1 IS - 1 SP - 100 EP - 103 ER - TY - GEN A1 - Francke, Klaus-Peter A1 - Rohrbeck, Wolfgang A1 - Rudolph, Rolf A1 - Volkmann, Hans T1 - 1 kW Pulse Corona Reactor for Voc Destruction T2 - Wissenschaftliche Beiträge 2/1998 N2 - A I kW pulse corona reactor has been developed capable of treating gas flows up to 100 m3/h. The discharge efficiency reaches 80 % in air and nearly 100 % in nitrogen flows. The efficiency of radical production has been proofed by ozone synthesis as weil as by NO to N2 conversion. Y1 - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-7546 SN - 0949-8214 VL - 4 IS - 2 SP - 48 EP - 50 ER - TY - GEN A1 - Beyer, Harald A1 - Harendt, Andreas A1 - Rolle, Siegfried A1 - Ross, Werner A1 - Volkmann, Hans T1 - TE-CO2-Laser mit variabler Impulsdauer T2 - Wissenschaftliche Beiträge 2/2000 N2 - Laserbearbeitungsverfahren wie Präzisionschneiden und Bohren erfordern den Einsatz von Laserimpulsen mit angepasster Impulsleistung (10 kW) und Impulsdauer (10 μs bis zu einigen 100 μs). Transversal elektrisch (TE) angeregte Impuls-CO2 -Laser werden bei Gasdrücken bis zu einigen 100 kPa betrieben. In diesem Bereich begrenzen jedoch einsetzende Plasmainstabilitäten die mögliche elektrische Anregungsdauer für ein homogenes nichtthermisches Entladungsplasma auf einige 100 ns [1]. Eine Verlängerung der Laserimpulsdauer ist durch Veränderung der Energietransportzeit im Lasermedium möglich. In [2,3] wurde dies durch eine Herabsetzung des CO2 -Anteils im Gasgemisch sowie durch Herabsetzung des Gasdrucks erreicht. Mit der zusätzlichen Verminderung des Heliumanteils [4] kann die Laserimpulsdauer bis zu 1000 μs ausgedehnt werden. Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-7006 SN - 0949-8214 VL - 5 IS - 2 SP - 13 EP - 16 ER - TY - GEN A1 - Beyer, Harald A1 - Pursch, Heinz A1 - Schumacher, Andreas T1 - Untersuchung des spektralen Einkoppelverhaltens von Lichtwellenleitersensoren T2 - Wissenschaftliche Beiträge 2/2000 N2 - In Schaltanlagen des Niederspannungsnetzes können Störlichtbögen zu erheblichen Schäden führen. Die Ursache der Lichtbögen ist vielfältig und reicht von Überschlägen an Isolationsstrecken über Blitzeinschläge in das Netz bis zu Kurzschlüssen, die bei Wartungs- oder Montagearbeiten verursacht werden können. Die Wirkungen von Störlichtbögen sind erheblich und können die Zerstörung der Schaltanlage zur Folge haben. Die Klöckner-Moeller GmbH hat ein Störlichtbogenschutzsystem (ARCON) entwickelt, das in die Schaltanlagen integriert wird. Da das Auftreten der Störlichtbögen nicht vorhersehbar ist, wird die gesamte Schaltanlage von Sensoren auf der Basis von Lichtwellenleitern überwacht. Für diesen Einsatzzweck sind die Sensoren so konzipiert, dass das Licht des Bogens nicht über die Stirnfläche des Lichtleiters, sondern seitlich über den Mantel in den Kern eingekoppelt wird. Die Leuchterscheinungen jedes sich bildenden Lichtbogens können von dem Sensor erfasst und an einen Detektor weitergeleitet werden, dessen Signal die Schutzmaßnahmen einleitet. Dadurch kann der Strom noch während der ersten Halbwelle abgeschaltet und der Schaden begrenzt werden. Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-7018 SN - 0949-8214 VL - 5 IS - 2 SP - 17 EP - 20 ER - TY - GEN A1 - Schmadl, Josef A1 - Wittl, Romel T1 - Experimentelle Untersuchung des Wärmeübergangs beim Sieden binärer Stoffgemische aus Aceton und Ethanol T2 - Wissenschaftliche Beiträge 2002 N2 - Das Sieden und besonders das in dieser Arbeit ausschließlich behandelte vollausgebildete Blasensieden ist immer dann die bevorzugte Form der Wärmeübertragung an Flüssigkeiten, wenn hohe Wärmeströme pro Heizflächeneinheit und pro K Heizwandüberhitzung übertragen werden sollen. In vielen Fällen werden dabei nicht reine Stoffe, sondern Stoffgemische eingesetzt, z. B. bei der Kühlung von Chemiereaktoren oder bei der thermischen Trennung von Stoffgemischen (Destillation, Rektifikation und Eindampfung zwecks Kristallisation). Dabei ist zu berücksichtigen, dass der Wärmeübergangskoeffizient beim Blasensieden von Gemischen wegen des kombinierten Wärme- und Stoffübergangs in der Regel kleiner als bei reinen Stoffen ist. Besonders bei hohen Wärmestromdichten, hohen Drücken und hohen relativen Flüchtigkeiten der beteiligten Stoffkomponenten kann dieser „Gemischeffekt“ den Wärmeübergangskoeffizienten um Faktor 10 und mehr herabsetzen, was in der Apparateauslegung berücksichtigt werden muss. Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-6915 SN - 0949-8214 VL - 7 SP - 59 EP - 65 ER - TY - GEN A1 - Schmadl, Josef A1 - Wittl, Romel T1 - Korrelation der Konzentrations- und Druckabhängigkeit des Wärmeübergangskoeffizienten beim Sieden von binären Stoffgemischen aus Aceton und Ethanol T2 - Wissenschaftliche Beiträge 2002 N2 - Bislang gibt es keine einheitliche Theorie, um den Wärmeübergang beim Blasensieden in freier Konvektion für binäre Gemische ohne experimentelle Daten und mit ausreichender Genauigkeit vorauszuberechnen. In der Literatur gibt es jedoch zahlreiche Korrelationsgleichungen bzw. Modelle für die praktische Berechnung des Wärmeübergangskoeffizienten (WÜK). Diese Modelle oder Gleichungen sind empirische oder halbempirische Ansätze, die nur auf spezielle Stoffpaare anwendbar oder auf niedrige Siededrücke beschränkt sind oder nicht alle Einflussparameter enthalten. Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-6927 SN - 0949-8214 VL - 7 SP - 66 EP - 70 ER - TY - JOUR A1 - Vandenhouten, Ralf A1 - Wendlandt, Ole T1 - High-precision Optical Position Measurement in Indoor Environments BT - A method for locating people by capturing multiple optical markers with a mobile device JF - Optik & Photonik N2 - Indoor localization is still a challenge today. Conventional methods based on satellite navigation, like GPS, can only be used outdoors. On the other hand, radio signal architectures, like WiFi or NFC, require high cost infrastructure to be installed inside the building. In collaboration with Ixellence GmbH, the research group for telematics of the University of Applied Science Wildau is developing a new inexpensive solution based on the camera of a mobile device. This approach only requires the availability of multiple identifiable landmarks that can be installed cost-efficiently in an indoor environment. Our investigations show that this method is very accurate and can produce repeatable, robust results. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-9305 SN - 1863-1460 VL - 10 IS - 3 SP - 24 EP - 27 ER - TY - CHAP A1 - Bauer, Joachim A1 - Heinrich, Friedhelm A1 - Fursenko, Oksana A1 - Marschmeyer, Steffen A1 - Bluemich, Adrian A1 - Pulwer, Silvio A1 - Steglich, Patrick A1 - Villringer, Claus A1 - Mai, Andreas A1 - Schrader, Sigurd T1 - Very high aspect ratio through silicon via reflectometry T2 - Proceedings of SPIE N2 - Through Silicon Via (TSV) technology is a key feature of new 3D integration of circuits by creation of interconnections using vias, which go through the silicon wafer. Typically, the highly-selective Bosch Si etch process, characterized by a high etch rate and high aspect ratio and forming of scallops on the sidewalls is used. As presented in this paper, we have developed an experimental setup and a respective evaluation algorithm for the control and monitoring of very high aspect ratio TSV profiles by spectroscopic reflectometry. For this purpose square via arrays with lateral dimension from 3 to 10 μm were fabricated by a Bosch etch process and analyzed by our setup. By exploiting interference and diffraction effects of waves reflected from the top and bottom surfaces as well as from the side walls of the TSV patterns, the measurements provided etch depths, CD values and scallop periods. The results were compared with data obtained by a commercial wafer metrology tool. Aspect ratios of up to 35:1 were safely evaluable by our setup. Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-13758 SN - 1996-756X ER - TY - CHAP A1 - Villringer, Claus A1 - Gilani, Taravat Saeb A1 - Zhang, Edward A1 - Pulwer, Silvio A1 - Steglich, Patrick A1 - Schrader, Sigurd A1 - Laufer, Jan T1 - Development of tuneable Fabry-Pérot sensors for parallelised photoacoustic signal acquisition T2 - Proc. SPIE 10878, Photons Plus Ultrasound: Imaging and Sensing 2019, 108780M (8 March 2019) N2 - Fabry-Pérot (FP) sensors have enabled high resolution 3D photoacoustic (PA) imaging in backward mode. However, raster-scanning of the interrogation laser beam across the sensor can result in slow 3D image acquisition. To overcome this limitation, parallelized PA signal acquisition can be used for which FP sensors with uniform optical thickness are required. In this work, the optical thickness is tuned a) irreversibly through the use of a photopolymer host matrix and b) actively using embedded electro-optic (EO) chromophores. Polymer spacers (5 μm) were deposited using spin coating and sandwiched between two dielectric mirrors and transparent ITO electrodes. The employed polymer guest-host system consists of an EO chromophore (2-methyl-4-nitroaniline) and poly(vinyl cinnamate). EO tuneability was induced using contact poling and a tuneability of 68 pm was demonstrated. The optical thickness was homogenised by raster scanning a UV beam whilst varying the exposure time across a 4 mm2 detection aperture. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-13769 SN - 1996-756X ER - TY - CHAP A1 - Chepurna, Oksana A1 - Grebinyk, Anna A1 - Petrushko, Yulia A1 - Prylutska, Svitlana A1 - Grebinyk, Sergii A1 - Yashchuk, Valeriy A1 - Matyshevska, Olga A1 - Ritter, Uwe A1 - Dandekar, Thomas A1 - Frohme, Marcus A1 - Qu, Junle A1 - Ohulchanskyy, Tymish Y. T1 - LED-based portable light source for photodynamic therapy N2 - Photodynamic therapy (PDT) employs light activation of tissue-localized photosensitizer in an oxygen-dependent process which initiates oxidative stress, inflammation, and cell death. Laser systems, which are mostly used in PDT as light sources can be costly and oversized. light-emitting diodes (LEDs) equipment has a high potential to simplify technical part of phototriggered therapies and to reduce its costs. We develop the LED-based system that includes the control and irradiation units. The system provides the same power density at any irradiation point. Among the advantages of the device is a possibility to change the irradiation area and tune the irradiation dose. PDT experiments with cancer cells in vitro treated with two different photosensitizers demonstrated a possibility to use the developed LED-based system as a low-cost light source in PDT. KW - light source KW - high power single chip LED KW - photodynamic therapy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-14778 ER - TY - CHAP A1 - Pulwer, Silvio A1 - Fiebelkorn, Richard A1 - Zesch, Christoph A1 - Steglich, Patrick A1 - Villringer, Claus A1 - Villasmunta, Francesco A1 - Gedat, Egbert A1 - Handrich, Jan A1 - Schrader, Sigurd A1 - Vandenhouten, Ralf T1 - Endoscopic orientation by multimodal data fusion T2 - Proc. SPIE 10931, MOEMS and Miniaturized Systems XVIII N2 - To improve the feasibility of endoscopic inspection processes we developed a system that provides online information about position, orientation and viewing direction of endoscopes, to support the analysis of endoscopic images and to ease the operational handling of the equipment. The setup is based on an industrial endoscope consisting of a camera, various MEMS and multimodal data fusion. The software contains algorithms for feature and geometric structure recognition as well as Kalman filters. To track the distal end of the endoscope and to generate 3D point cloud data in real time the optical and photometrical characteristics of the system are registered and the movement of the endoscope is reconstructed by using image processing techniques. KW - endoscope KW - orientation KW - Kalman filter KW - visual odometry KW - mems KW - gyroscope KW - accelerometer Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-11420 SN - 1996-756X ER - TY - JOUR A1 - Bondarenko, Siegfried A1 - Hülsemann, Marcel A1 - Mai, Andreas A1 - Steglich, Patrick T1 - Fiber-to-chip light coupling using a graded-index lensed fiber collimator JF - Optical Engineering N2 - Fiber-to-chip light coupling using a graded-index (GRIN) fiber collimator is investigated. Our experiments with grating couplers and strip waveguides fabricated in a photonic integrated circuit technology reveal that the peak coupling efficiency of a GRIN fiber collimator is 7.8 dB lower than that of a single-mode fiber. However, the 3-dB alignment tolerance is improved by a factor of about 5.7 giving rise to pluggable sensor solutions. This work opens a path toward a cost-effective and portable sensor platform based on pluggable photonic biosensors using GRIN fiber collimators. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-13749 SN - 1560-2303 VL - 60 IS - 1 PB - SPIE ER - TY - JOUR A1 - Kagel, Heike A1 - Jacobs, Hannes A1 - Bier, Frank Fabian A1 - Glökler, Jörn A1 - Frohme, Marcus T1 - A Novel Microtiter Plate Format High Power Open Source LED Array JF - Photonics N2 - Many photochemical or photobiological applications require the use of high power ultraviolet light sources, such as high-pressure mercury arc lamps. In addition, many photo-induced chemical, biochemical and biological applications require either a combinatorial setting or a parallel assay of multiple samples under the same environmental conditions to ensure reproducibility. To achieve this, alternative, controllable light sources, such as ultraviolet light emitting diodes (UV LEDs) with high power and spatial control are required. Preferably, LEDs are arranged in a suitable standardized 96-well microtiter plate format. We designed such an array and established the methods required for heat management and enabling stable, controllable illumination over time. KW - optics KW - photonics KW - light KW - LED array KW - High-power LED KW - 365 nm KW - microtiter plate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-11307 SN - 2304-6732 VL - 6 IS - 1 ER - TY - JOUR A1 - Jurkovičová, Lucie A1 - Ben Ltaief, Ltaief A1 - Roos, Andreas Hult A1 - Hort, Ondřej A1 - Finke, Ondřej A1 - Albrecht, Martin A1 - Hoque, Ziaul A1 - Klimešová, Eva A1 - Sundaralingam, Akgash A1 - Antipenkov, Roman A1 - Grenfell, Annika A1 - Špaček, Alexandr A1 - Szuba, Wojciech A1 - Krikunova, Maria A1 - Mudrich, Marcel A1 - Nejdl, Jaroslav A1 - Andreasson, Jakob T1 - Bright continuously tunable vacuum ultraviolet source for ultrafast spectroscopy JF - Communications Physics N2 - Ultrafast electron dynamics drive phenomena such as photochemical reactions, catalysis, and light harvesting. To capture such dynamics in real-time, femtosecond to attosecond light sources are extensively used. However, an exact match between the excitation photon energy and a characteristic resonance is crucial. High-harmonic generation sources are advantageous in terms of pulse duration but limited in spectral tunability in the vacuum ultraviolet range. Here, we present a monochromatic femtosecond source continuously tunable around 21eV photon energy utilizing the second harmonic of an optical parametric chirped pulse amplification laser system to drive high-harmonic generation. The unique tunability of the source is verified in an experiment probing the interatomic Coulombic decay in doped He nanodroplets across the He absorption bands. Moreover, we achieved intensities sufficient for driving collective processes in multiply excited helium nanodroplets, which have been previously observed only at free electron lasers. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-18462 SN - 2399-3650 VL - 7 PB - Nature Publishing Group ER - TY - JOUR A1 - Medina, Cristian A1 - Lægdsmand, Asbjørn Ørnemark A1 - Ben Ltaief, Ltaief A1 - Hoque, Ziaul A1 - Roos, Andreas Hult A1 - Jurkovičová, Lucie A1 - Hort, Ondřej A1 - Finke, Ondřej A1 - Albrecht, Martin A1 - Nejdl, Jaroslav A1 - Stienkemeier, Frank A1 - Andreasson, Jakob A1 - Klimešová, Eva A1 - Krikunova, Maria A1 - Heidenreich, Andreas A1 - Mudrich, Marcel T1 - Long-lasting XUV activation of helium nanodroplets for avalanche ionization JF - New Journal of Physics N2 - We study the dynamics of avalanche ionization of pure helium nanodroplets activated by a weak extreme-ultraviolet (XUV) pulse and driven by an intense near-infrared (NIR) pulse. In addition to a transient enhancement of ignition of a nanoplasma at short delay times ${\sim}200$ fs, long-term activation of the nanodroplets lasting up to a few nanoseconds is observed. Molecular dynamics simulations suggest that the short-term activation is caused by the injection of seed electrons into the droplets by XUV photoemission. Long-term activation appears due to electrons remaining loosely bound to photoions which form stable 'snowball' structures in the droplets. Thus, we show that XUV irradiation can induce long-lasting changes of the strong-field optical properties of nanoparticles, potentially opening new routes to controlling avalanche-ionization phenomena in nanostructures and condensed-phase systems. KW - nanoplasma KW - helium nanodroplet KW - pump–probe spectroscopy KW - avalanche ionization KW - high-harmonic generation KW - extreme ultraviolet Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-17701 VL - 25 PB - Institute of Physics (IOP) ER - TY - JOUR A1 - Smekhova, Alevtina A1 - Szyjka, Thomas A1 - La Torre, Enrico A1 - Ollefs, Katharina A1 - Eggert, Benedikt A1 - Coester, Birte A1 - Wilhelm, Fabrice A1 - Bali, Rantej A1 - Lindner, Jürgen A1 - Rogalev, A. A1 - Többens, Daniel Maria A1 - Weschke, Eugen A1 - Luo, Chen A1 - Chen, Kai A1 - Radu, Florin A1 - Schmitz-Antoniak, Carolin A1 - Wende, Heiko T1 - Irradiation-induced enhancement of Fe and Al magnetic polarizations in Fe60Al40 films JF - New Journal of Physics N2 - The rise of Fe magnetic moment, changes in Al electronic structure and a variation of Al magnetic polarization in thin films of transition metal aluminide Fe60Al40 have been probed through the order-disorder phase transition by soft X-ray absorption spectroscopy and X-ray resonant magnetic reflectivity in the extreme ultraviolet regime. In a course of the transition induced by 20 keV Ne+ irradiation with low fluences (1014 ions·cm-2), X-ray magnetic circular dichroism spectra taken at the Fe L2,3 absorption edges at room and low temperatures revealed a pronounced increase of Fe 3d states spin-polarization. X-ray resonant magnetic reflectivity applied to the Al L2,3 and Fe M2,3 edges allowed to detect the magnetic polarization of Al atoms in the films. The changes in Al electronic structure have been seen by alteration of Al K edge X-ray absorption near edge structure. A difference in anisotropy fields for films before and after irradiation has been observed by element-specific hysteresis loops recorded at low temperatures in absorption and reflection geometries at the Fe L2,3 and M2,3 edges, respectively. An attempt to reduce the top oxide layer by an inductively coupled hydrogen plasma has shown a possibility to recover the chemically ordered phase. KW - chemical disorder KW - ion-irradiation KW - XANES KW - XMCD KW - plasma treatment Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-18381 SN - 1367-2630 VL - 26 PB - Institute of Physics Publishing (IOP) ER - TY - CHAP A1 - Kupper, Stefan A1 - Mühlig, Verena A1 - Jakobeschky, Laura ED - Reiff-Stephan, Jörg ED - Jäkel, Jens ED - Stöcker, Christian T1 - AD3D - Eine automatisierte Toolchain für das 3D-Drucken T2 - Tagungsband AALE 2024 : Fit für die Zukunft: Praktische Lösungen für die industrielle Automation N2 - Der technische Fortschritt hat dazu geführt, dass die Kosten für das automatisierte Drucken von Emblemen, Anhängern sowie allgemein gedruckten Prototypen stark gefallen sind. Dies geschah insbesondere auch vor dem Hintergrund eines Wandels der Industrie hin zu einer modernen Industrie 4.0. In dieser Arbeit wird ein neuer Ansatz für das automatische 3D-Drucken eines Logos präsentiert, welches als Pixelgrafik vorliegt. Die vorgeschlagene Prozesskette erzeugt hierbei final den G-code zum Drucken. Dabei sind seitens des Users wenige Eingaben erforderlich. KW - Additive Fertigung KW - 3D-Druck KW - Industrie 4.0 KW - Marketing Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-18553 SN - 978-3-910103-02-3 N1 - 20. AALE-Konferenz. Bielefeld, 06.03.-08.03.2024 SP - 259 EP - 263 PB - Hochschule für Technik, Wirtschaft und Kultur CY - Leipzig ER - TY - JOUR A1 - Lux, Helge A1 - Siemroth, Peter A1 - Sgarlata, Anna A1 - Prosposito, Paolo A1 - Schubert, Markus Andreas A1 - Casalboni, Mauro A1 - Schrader, Sigurd T1 - Synthesis of graphene-like transparent conductive films on dielectric substrates using a modified filtered vacuum arc system JF - Journal of Applied Physics N2 - Here, we present a reliable process to deposit transparent conductive films on silicon oxide, quartz, and sapphire using a solid carbon source. This layer consists of partially ordered graphene flakes with a lateral dimension of about 5 nm. The process does not require any catalytic metal and exploits a high current arc evaporation (Φ-HCA) to homogeneously deposit a layer of carbon on heated substrates. A gas atmosphere consisting of Argon or Argon/Hydrogen blend acting as a buffer influences the morphology of the growing film. scanning tunneling microscopy, transmission electron microscopy, and Raman spectra were used for a thorough characterization of the samples in order to optimize the growth parameters. The best carbon layers have a surface resistance of 5.7 × 103 Ω◻ whereas the optical transparency of the coatings is 88% with an excellent homogeneity over areas of several cm2. Such results are compatible with most semiconductor fabrication processes and make this method very promising for various industrial applications. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-9738 SN - 1089-7550 VL - 117 IS - 19 ER - TY - JOUR A1 - Steglich, Patrick A1 - Mai, Christian A1 - Villringer, Claus A1 - Pulwer, Silvio A1 - Casalboni, Mauro A1 - Schrader, Sigurd A1 - Mai, Andreas T1 - Quadratic electro-optic effect in silicon-organic hybrid slot-waveguides JF - Optics Letters N2 - This Letter reports on the quadratic electro-optic effect of polymers, observed in a silicon slot-waveguide at low voltages. We demonstrate that in narrow slots, the electro-optic response with respect to refractive index change is strong enough for on-chip wavelength tuning and intensity modulation using voltages as low as 1 V. A silicon slot-waveguide embedded by a nonlinear optical polymer, consisting of the dye Disperse Red 1 in poly(methyl methacrylate), serves as the phase shifter in a racetrack ring resonator. As deduced from the experimental data, the third-order susceptibility of the utilized electro-optic polymer is about 2·10−19 m2/V2. The demonstrated low-voltage operation and inherently thermal stability show the potential for silicon-organic hybrid devices using the quadratic electro-optic effect. Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-12148 SN - 1539-4794 VL - 43 IS - 15 ER -