TY - JOUR A1 - Lux, Helge A1 - Edling, Matthias A1 - Lucci, Massimiliano A1 - Kitzmann, Julia A1 - Villringer, Claus A1 - Siemroth, Peter A1 - De Matteis, Fabio A1 - Schrader, Sigurd T1 - The Role of Substrate Temperature and Magnetic Filtering for DLC by Cathodic Arc Evaporation JF - Coatings N2 - Diamond-like carbon (DLC) films were deposited using two different types of high current arc evaporation. The first process used a magnetic particle filter to remove droplets from the plasma. For the second process, the samples were put into a metallic cage which was placed directly above the plasma source. For both processes, we varied the substrate temperature from 21 to 350 °C in order to investigate the temperature effect. The samples were characterized using SEM, AFM, XPS, Raman Spectroscopy, Ellipsometry, Photometry, and Nano Indentation in order to compare both methods of deposition and provide a careful characterization of such DLC films. We found that the sp3 content and the hardness can be precisely adjusted by changing the substrate temperature. Furthermore, in the case of unfiltered deposition, the optical constants can be shifted in the direction of higher absorbance in order to produce black and hard carbon coatings. KW - DLC KW - ta-C KW - arc evaporation KW - substrate temperature KW - hardness KW - optical constant KW - ellipsometry Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-12295 SN - 2079-6412 VL - 9 IS - 5 SP - 345 ER - TY - JOUR A1 - Steglich, Patrick A1 - Villringer, Claus A1 - Dietzel, Birgit A1 - Mai, Christian A1 - Schrader, Sigurd A1 - Casalboni, Mauro A1 - Mai, Andreas T1 - On-Chip Dispersion Measurement of the Quadratic Electro-Optic Effect in Nonlinear Optical Polymers Using a Photonic Integrated Circuit Technology JF - IEEE Photonics Journal N2 - A novel method to determine the dispersion of the quadratic electro-optic effect in nonlinear optical materials by using a silicon-on-insulator microring resonator is presented. The microring consists of a silicon slot waveguide enabling large dc electric field strength at low applied voltages. The dispersion of third-order hyperpolarizability of a linear conjugated dye is approximated by using a two-level model for the off-resonant spectral region. As an example, the dispersion of the resonance wavelength of the resonator filled with a dye doped polymer was measured in dependence of the applied dc voltage. The polymer was poly (methylmethacrylate) doped with 5 wt% disperse red 1 (DR1), and the measurements have been carried out at the telecommunication wavelength band around 1550 nm (optical C-band). The described measurements represent a new technique to determine the dispersion of the third-order susceptibility and molecular hyperpolarizability of the material filled into the slot of the ring-resonator. KW - electro-optical device KW - nonlinear optics KW - integrated optics KW - integrated optics material KW - optical material KW - integrated optics device KW - polymer active device Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-12307 SN - 1943-0655 VL - 11 IS - 3 ER - TY - CHAP A1 - Steglich, Patrick A1 - Villringer, Claus A1 - Dümecke, Silvio A1 - Padilla-Michel, Yazmin A1 - Casalboni, Mauro A1 - Schrader, Sigurd T1 - Silicon-On-Insulator Slot-Waveguide Design Trade-Offs T2 - Proceedings of the 3rd International Conference on Photonics, Optics and Laser Technology : vol. 2 N2 - Silicon-on-insulator slot-waveguide structures are designed and analysed numerically. We present our theoretical investigation of field confinement factors and effective nonlinear areas for different waveguide structures in order to find optimized geometrical dimensions. It is shown that a slot-waveguide with a height of 220 nm, a slot width of 180 nm and a silicon rail width of 180 nm provides a five times higher field confinement in the cladding region compared to conventional strip-waveguides which explains the high sensitivity of slotwaveguide based label-free bio-sensors. KW - slot waveguide KW - silicon-organic hybrid technology KW - optical field confinement KW - effective nonlinear area Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-20104 SP - 47 EP - 52 PB - SciTePress CY - Setúbal ER - TY - JOUR A1 - Villringer, Claus A1 - Steglich, Patrick A1 - Pulwer, Silvio A1 - Schrader, Sigurd A1 - Laufer, Jan T1 - Electro-optical properties of doped polymers with high transparency in the visible wavelength range JF - Optical Materials Express N2 - The electro-optical (EO) properties of poly(methyl methacrylate) and the photopolymer poly(vinyl cinnamate) doped with varying concentrations of the EO chromophore 2-Methyl-4-nitroaniline were measured. The EO polymers were embedded in Fabry-Pérot etalons for the simultaneous determination of the Pockels and Kerr coefficients from measurements of the fringe shift induced by an external electric field. It was found that the host polymer has a significant impact on the EO performance and that the undoped host polymers exhibit a significant Pockels effect. Moreover, the Kerr effect provides a substantial contribution of 27% to the total change of the refractive index at relatively high electric field strengths of E = 91.2 MV m−1. KW - Bragg reflector KW - fiber optic coupler KW - refractive index KW - spatial light modulator KW - transparency KW - tunable filter Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15480 VL - 11 IS - 11 SP - 3801 EP - 3811 PB - Optica Publishing Group ER - TY - JOUR A1 - Sopinskyy, Mykola A1 - Grytsenko, Kostyantyn A1 - Villringer, Claus A1 - Kolomzarov, Yurii A1 - Schrader, Sigurd T1 - Determination of scattering and Urbach absorption contributions to the light extinction in PTFE films by using graphical representation technique and numerical solution of the inverse problem JF - Semiconductor Physics, Quantum Electronics & Optoelectronics N2 - Ellipsometrically obtained spectral dependences of ordinary αxy and extra-ordinary αz extinction/attenuation coefficients within the spectral range λ = 300…980 nm of uniaxially anisotropic polytetrafluoroethylene (PTFE) films were analyzed. We considered the capabilities and specific features of the graphical representation technique for determining the contribution of Rayleigh scattering and Urbach absorption to light attenuation in the spectral range beyond fundamental absorption. It has been shown that the graphical approach enables to estimate these contributions qualitatively, semi-quantitatively or quantitatively, depending on the situation. The conclusions made using the analysis of graphical representation are confirmed by numerical solution of the inverse problem via simulation of the αxy (λ), αz (λ) experimental dependences within the framework of a best-fit procedure. Being based on both of these approaches, we have ascertained that, in the as-prepared PTFE films, the so-called anomalous light scattering (ALS) with the spectral dependence of scattering coefficient αs ≈ as λ–p (p > 4) takes place. Transformation of scattering from ALS to the Rayleigh one with p ≈ 4 due to annealing is accompanied by an increase of Urbach (subband) absorption. Both of these factors cause narrowing the dynamic range of extinction coefficient values. Both scattering and absorption coefficients are higher for the component of light polarized along the normal to the substrate as compared to the component polarized in parallel to it. The relationship between observed behavior of the scattering and absorption coefficients and the film structure has been discussed. KW - Rayleigh scattering KW - Urbach tail KW - absorption coefficient KW - scattering coefficient KW - graphical method KW - ellipsometry KW - polytetrafluoroethylene Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-18035 SN - 1605-6582 VL - 26 IS - 3 SP - 303 EP - 314 PB - National Academy of Sciences of Ukraine. Institute for Semiconductor Physics CY - Kyiv ER - TY - JOUR A1 - Grytsenko, Kostyantyn A1 - Kolomzarov, Yurii A1 - Lytvyn, Peter A1 - Kondratenko, Olga A1 - Sopinskyy, Mykola A1 - Lebedyeva, Iryna A1 - Niemczyk, Agata A1 - Baranowska, Jolanta A1 - Moszyński, Dariusz A1 - Villringer, Claus A1 - Schrader, Sigurd T1 - Optical and Mechanical Properties of Thin PTFE Films, Deposited from a Gas Phase JF - Macromolecular Materials and Engineering N2 - Thin polytetrafluoroethylene (PTFE) films are produced by deposition from a gas phase by two methods: electron-enhanced vacuum deposition (EVD) and EVD + low-temperature plasma (LTP). Structure, morphology, and composition of the films are studied by IR spectroscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. They are close to the structure of bulk PTFE. The roughness of the films’ surface is changed with gas pressure and LTP power variations. Films are transparent from UV to near-infrared regions. Refractive and extinction indices and their anisotropy are measured by spectral ellipsometry. They are tuned by variations of deposition conditions. Hardness and Young modulus of the films are increased if EVD + low power LTP is used for film deposition. Use of EVD + LTP also increases thermal stability of the films. Contact angle of the films corresponds to the bulk PTFE. The PTFE molecules oriented are preferentially in perpendicular direction to the substrate surface. KW - deposition in vacuum KW - multiphase structure formation KW - optical property KW - plasma KW - polytetrafluoroethylene thin film Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-17587 VL - 308 IS - 6 PB - Wiley ER - TY - CHAP A1 - Steglich, Patrick A1 - Mai, Christian A1 - Stolarek, David A1 - Lischke, Stefan A1 - Kupijai, Sebastian A1 - Villringer, Claus A1 - Pulwer, Silvio A1 - Heinrich, Friedhelm A1 - Bauer, Joachim A1 - Meister, Stefan A1 - Knoll, Dieter A1 - Casalboni, Mauro A1 - Schrader, Sigurd T1 - Partially slotted silicon ring resonator covered with electro-optical polymer T2 - Proceedings of SPIE N2 - In this work, we present for the first time a partially slotted silicon ring resonator (PSRR) covered with an electro-optical polymer (Poly[(methyl methacrylate)-co-(Disperse Red 1 acrylate)]). The PSRR takes advantage of both a highly efficient vertical slot waveguide based phase shifter and a low loss strip waveguide in a single ring. The device is realized on 200 mm silicon-on-insulator wafers using 248 nm DUV lithography and covered with the electro-optic polymer in a post process. This silicon-organic hybrid ring resonator has a small footprint, high optical quality factor, and high DC device tunability. A quality factor of up to 105 and a DC device tunability of about 700 pm/V is experimentally demonstrated in the wavelength range of 1540 nm to 1590 nm. Further, we compare our results with state-of-the-art silicon-organic hybrid devices by determining the poling efficiency. It is demonstrated that the active PSRR is a promising candidate for efficient optical switches and tunable filters. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-13771 SN - 1996-756X ER - TY - CHAP A1 - Pulwer, Silvio A1 - Steglich, Patrick A1 - Villringer, Claus A1 - Bauer, Joachim A1 - Burger, Martin A1 - Franz, M. A1 - Grieshober, K. A1 - Wirth, F. A1 - Blondeau, J. A1 - Rautenberg, J. A1 - Mouti, S. A1 - Schrader, Sigurd T1 - Triangulation-based 3D surveying borescope N2 - In this work, a measurement concept based on triangulation was developed for borescopic 3D-surveying of surface defects. The integration of such measurement system into a borescope environment requires excellent space utilization. The triangulation angle, the projected pattern, the numerical apertures of the optical system, and the viewing angle were calculated using partial coherence imaging and geometric optical raytracing methods. Additionally, optical aberrations and defocus were considered by the integration of Zernike polynomial coefficients. The measurement system is able to measure objects with a size of 50 μm in all dimensions with an accuracy of ± 5 μm. To manage the issue of a low depth of field while using an optical high resolution system, a wavelength dependent aperture was integrated. Thereby, we are able to control depth of field and resolution of the optical system and can use the borescope in measurement mode with high resolution and low depth of field or in inspection mode with low resolution and higher depth of field. First measurements of a demonstrator system are in good agreement with our simulations. KW - borescope KW - 3D measurement KW - triangulation KW - lens design KW - calibration KW - defect Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15307 SP - 51 EP - 56 PB - SPIE ER - TY - CHAP A1 - Pulwer, Silvio A1 - Jahns, Daniel A1 - Villringer, Claus A1 - Schrader, Sigurd T1 - Dynamic pattern generation by singlemode fibers for endoscopic 3D measurement systems N2 - This work presents experimental and simulation results of a 3D measurement concept based on fiber-optic interference pattern generation. A demonstrator system which is able to adjust different optical and mechanical parameters is described. The results of parameter variation studies are discussed along with possible applications in the field of micro-optical 3D measurement systems like endoscopes. The experiments were prepared with different structures with various scattering properties. To implement that approach into a micro-optical 3D measurement system, the combination of distance variation between the fibers and a controlled phase shift introduced by a retarder can be used to design the system versatile. KW - endoscope KW - 3D measurement KW - phase shift KW - fiber Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15364 PB - SPIE ER - TY - CHAP A1 - Gilani, Taravat Saeb A1 - Villringer, Claus A1 - Zhang, Edward A1 - Gundlach, H. A1 - Buchmann, Jens A1 - Schrader, Sigurd A1 - Laufer, Jan T1 - Parallelised photoacoustic signal acquisition using a Fabry-Perot sensor and a camera-based interrogation scheme N2 - Tomographic photoacoustic (PA) images acquired using a Fabry-Perot (FP) based scanner offer high resolution and image fidelity but can result in long acquisition times due to the need for raster scanning. To reduce the acquisition times, a parallelised camera-based PA signal detection scheme is developed. The scheme is based on using a sCMOScamera and FPI sensors with high homogeneity of optical thickness. PA signals were acquired using the camera-based setup and the signal to noise ratio (SNR) was measured. A comparison of the SNR of PA signal detected using 1) a photodiode in a conventional raster scanning detection scheme and 2) a sCMOS camera in parallelised detection scheme is made. The results show that the parallelised interrogation scheme has the potential to provide high speed PA imaging. KW - photoacoustic imaging KW - parallelised signal acquisition KW - Fabry-Perot polymer film sensor Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15335 SP - 217 EP - 222 PB - SPIE ER -