TY - GEN A1 - Kornejew, Eckhart A1 - Stoychev, Valentin T1 - Determination of carcinogen 4,4’-diamino diphenyl methane (MDA) in polyols derived from flexible polyurethane foam solvolysis by combination of SEC and GC/MS T2 - Wissenschaftliche Beiträge 2009/2010 N2 - Vorgestellt wird eine Methode zur quantitativen Bestimmung der krebserregenden Substanz 4,4’-Diaminodiphenylmethan (MDA) in Polyolen, die aus Polyurethan- Weichschäumen durch Solvolyse hergestellt wurden. Dabei wird zunächst der niedermolekulare Anteil mittels Gelpermeationschromatographie abgetrennt und enthaltenes MDA anschließend über Gaschromatographie/ Massenspektrometrie bestimmt. N2 - A method is presented to determine the concentration of the carcinogen 4,4’-diamino diphenyl methane (MDA) in polyols derived from polyurethane flexible foam solvolysis by combination of size exclusion chromatography (SEC) and gas chromatography coupled to mass spectrometry (GC/MS). The first step of the method is the separation of the MDA containing fraction by SEC while the second step consists in the quantitative analysis of the MDA amount by GC/MS. Quantitation limits of the method are lower than 0.05 % MDA in the polyol samples with an accuracy of ± 12 % of the determined values. Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus-886 SN - 0949-8214 VL - 14 SP - 69 EP - 74 ER - TY - GEN A1 - Behrendt, Gerhard A1 - Stoychev, Valentin A1 - Lehmann, Dieter T1 - Chemisches Recycling von Polyurethan-Blockweichschaumstoffen - Bisherige Ergebnisse T2 - Wissenschaftliche Beiträge 2005 N2 - Ziel dieser Untersuchungen war es, für die unterschiedlichen PUR-Blockweichschaumstoff-Arten optimale Verfahren und Zusammensetzungen zu finden und in Labor- bzw. kleintechnischen Versuchen zu erproben, um daraus geeignete Anwendungs- bzw. Einsatzmöglichkeiten in PUR sowie Formulierungen für neuartige Anwendungen direkt aus der Solvolyse zur Verfügung stellen zu können. Schließlich sollte durch diese angepassten Solvolysezusammensetzungen und die darauf optimierten Verfahrensbedingungen die Vorstufe des Einsatzes in industriellen Verfahren erreicht werden. Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-4294 SN - 0949-8214 VL - 10 SP - 85 EP - 92 ER -