TY - JOUR A1 - Villringer, Claus A1 - Steglich, Patrick A1 - Pulwer, Silvio A1 - Schrader, Sigurd A1 - Laufer, Jan T1 - Electro-optical properties of doped polymers with high transparency in the visible wavelength range JF - Optical Materials Express N2 - The electro-optical (EO) properties of poly(methyl methacrylate) and the photopolymer poly(vinyl cinnamate) doped with varying concentrations of the EO chromophore 2-Methyl-4-nitroaniline were measured. The EO polymers were embedded in Fabry-Pérot etalons for the simultaneous determination of the Pockels and Kerr coefficients from measurements of the fringe shift induced by an external electric field. It was found that the host polymer has a significant impact on the EO performance and that the undoped host polymers exhibit a significant Pockels effect. Moreover, the Kerr effect provides a substantial contribution of 27% to the total change of the refractive index at relatively high electric field strengths of E = 91.2 MV m−1. KW - Bragg reflector KW - fiber optic coupler KW - refractive index KW - spatial light modulator KW - transparency KW - tunable filter Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15480 VL - 11 IS - 11 SP - 3801 EP - 3811 PB - Optica Publishing Group ER - TY - CHAP A1 - Steglich, Patrick A1 - Mai, Christian A1 - Stolarek, David A1 - Lischke, Stefan A1 - Kupijai, Sebastian A1 - Villringer, Claus A1 - Pulwer, Silvio A1 - Heinrich, Friedhelm A1 - Bauer, Joachim A1 - Meister, Stefan A1 - Knoll, Dieter A1 - Casalboni, Mauro A1 - Schrader, Sigurd T1 - Partially slotted silicon ring resonator covered with electro-optical polymer T2 - Proceedings of SPIE N2 - In this work, we present for the first time a partially slotted silicon ring resonator (PSRR) covered with an electro-optical polymer (Poly[(methyl methacrylate)-co-(Disperse Red 1 acrylate)]). The PSRR takes advantage of both a highly efficient vertical slot waveguide based phase shifter and a low loss strip waveguide in a single ring. The device is realized on 200 mm silicon-on-insulator wafers using 248 nm DUV lithography and covered with the electro-optic polymer in a post process. This silicon-organic hybrid ring resonator has a small footprint, high optical quality factor, and high DC device tunability. A quality factor of up to 105 and a DC device tunability of about 700 pm/V is experimentally demonstrated in the wavelength range of 1540 nm to 1590 nm. Further, we compare our results with state-of-the-art silicon-organic hybrid devices by determining the poling efficiency. It is demonstrated that the active PSRR is a promising candidate for efficient optical switches and tunable filters. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-13771 SN - 1996-756X ER - TY - CHAP A1 - Padilla-Michel, Yazmin A1 - Pulwer, Silvio A1 - Saffari, Pouneh A1 - Ksianzou, Viachaslau A1 - Schrader, Sigurd T1 - On the origin and removal of interference patterns in coated multimode fibres N2 - In this study, we present the experimental investigations on interference patterns, such as those already reported in VIMOS-IFU, and up to now no appropriate explanation has been presented. These interference patterns are produced in multimode fibres coated with acrylate or polyimide, which is the preferred coating material for the fibres used in IFUs. Our experiments show that, under specific conditions, cladding modes interact with the coating and produce interference. Our results show that the conditions at which the fibre is held during data acquisition has an impact in the output spectrum. Altering the positioning conditions of the fibre leads to the changes into the interference pattern, therefore, fibres should be carefully manipulated in order to minimise this potential problem and improve the performance of these instruments. Finally we present a simple way of predicting and modelling this interference produced from the visible to the near infrared spectra. This model can be included in the data reduction pipeline in order to remove the interference patterns. These results should be of interest for the optimisation of the data reduction pipelines of instruments using optical fibres. Considering these results will benefit innovations and developments of high performance fibre systems. KW - instrumentation KW - multimode fibre KW - bending loss KW - fringing KW - interference KW - coating material KW - data reduction Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15295 SP - 1517 EP - 1527 PB - Society of Photo-Optical Instrumentation Engineers (SPIE) ER -