TY - JOUR A1 - Azmitia, Alfredo A1 - Mohnke, Janett A1 - Wiechers, Henning T1 - Wo bin ich? iBeacons im Einsatz in der Bibliothek der TH Wildau JF - Bibliothek : Forschung und Praxis N2 - Mit diesem Beitrag soll der Einsatz von iBeacons als Basis eines Indoor-Ortungssystems in der Hochschulbibliothek der Technischen Hochschule Wildau vorgestellt werden. Für die Ortung innerhalb von Gebäuden sind bisher unterschiedliche Strategien zum Einsatz gekommen. Die von Apple Inc. entwickelte iBeacon-Technologie kommuniziert über Bluetooth Low Energy (BLE) und setzt somit eine Technologie ein, die einen großen Kreis von Nutzern erreicht. Als wesentlicher Teil der Campus-App Unidos Wildau operiert das Ortungssystem auf der Basis des Kartendienstes iCampus Wildau Maps. Gemachte Erfahrungen mit der iBeacon-Technologie werden ebenso im Fokus dieses Beitrags stehen wie Ergebnisse der Implementierung unseres Ortungssystems sowie Pläne für die Weiterentwicklung. N2 - This article describes the usage of the iBeacon technology as the basis for an indoor positioning system within the library of the University of Applied Sciences Wildau. Developed by Apple Inc., this technology is based on the widespread Bluetooth Low Energy (BLE) standard, thus allowing the implementation reach a large number of client devices. The article will focus on the gained experiences so far and on the results of the implementation of a positioning algorithm within our iOS and Android apps, as well as the use of our map service, iCampus Wildau Maps, as the interface for displaying the user’s position. It will briefly discuss possible enhancements and present future plans for further development. KW - iBeacon KW - Indoor-Ortung KW - Indoor-Navigation KW - Campus-App KW - Android KW - iOS KW - BLE KW - Telematik KW - Bibliotheksinformatik KW - Bibliotheks-App Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-9186 SN - 1865-7648 VL - 40 IS - 3 SP - 395 EP - 404 ER - TY - GEN A1 - Bolle, Tom-Ole A1 - Rohrlack, Christopher A1 - Meriac, Milosch A1 - Mohnke, Janett T1 - An indoor localization system using active RFID technology T2 - Wissenschaftliche Beiträge 2013 N2 - Im Jahr 2009 wurde das "iCampus Wildau" Projekt an der Technischen Hochschule Wildau [FH] initiiert, ein Projekt, das vorrangig durch die Mitarbeit von Studierenden des Studiengangs Telematik geprägt ist und der Leitung von Frau Prof. Dr. Mohnke unterliegt. Das große Ziel liegt in der Schaffung eines mobilen und multilingualen Campus-Informationssystems, das es Besuchern, Studierenden und Mitarbeitern der TH Wildau [FH] ermöglicht, einen schnellen und übersichtlichen Einblick in alle Domänen des Campus zu erhalten. Neben Höhepunkten in der Softwareentwicklung, darunter die Programmierung von Smartphone- und "Rich Internet"-Applikationen, beschäftigen sich die Projektmitarbeiter auch mit der Entwicklung und Evaluation eines Indoor-Ortungs-Systems in der Hochschulbibliothek, das seitens der Hardware auf aktiver RFID-Technik, die im lizenzfreien 2,4 Ghz ISM-Band arbeitet, aufbaut und seitens der Software auf einem open-source Projekt mit dem Namen "OpenBeacon" basiert. ICampus’ Ziel ist es, das System durch Anpassung der Firmware der OpenBeacon-RFID-Tags und (Weiter-)entwicklung von Ortungsalgorithmen so zu stabilisieren, dass es auch in kritischen baulichen Gegebenheiten zuverlässige Ergebnisse liefert und universell einsetzbar wird. N2 - In 2009 the „icampus Wildau“ project started at the Technical university of applied sciences in Wildau. It is a project mainly driven by students of the Telematics course under the guidance of prof. Dr. Janett mohnke. The main goal is to set up a mobile and multilingual on-campus-information system, providing visitors, students and employees a quick and clear overview of the facilities of the different university domains as well as information about special events. Besides highlights in the field of software development such as programming smartphone and rich internet applications, the icampus project team develops and evaluates an indoor localization system in the university’s library that is based on active RFID technology, working in the 2.4GHz ISM-band and opensource software, namely “openbeacon”. Reaching the main target, which is stabilization of localization results and universal usage in almost every critical constructional area, is achieved by the adaptation of the RFID tag’s firmware and the further development of localization algorithms. Detailed descriptions from the hardware and software side as well as a discussion of the perspective of this technology will be made in this paper. KW - Indoor-Ortung Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-2447 SN - 0949-8214 VL - 17 SP - 67 EP - 71 ER - TY - JOUR A1 - Zhou, Yuefang A1 - Kornher, Tristan A1 - Mohnke, Janett A1 - Fischer, Martin H. T1 - Tactile Interaction with a Humanoid Robot: Effects on Physiology and Subjective Impressions JF - International Journal of Social Robotics N2 - This study investigated how touching and being touched by a humanoid robot affects human physiology, impressions of the interaction, and attitudes towards humanoid robots. 21 healthy adult participants completed a 3 (touch style: touching, being touched, pointing) × 2 (body part: hand vs buttock) within-subject design using a Pepper robot. Skin conductance response (SCR) was measured during each interaction. Perceived impressions of the interaction (i.e., friendliness, comfort, arousal) were measured per questionnaire after each interaction. Participants’ demographics and their attitude towards robots were also considered. We found shorter SCR rise times in the being touched compared to the touching condition, possibly reflecting psychological alertness to the unpredictability of robot-initiated contacts. The hand condition had shorter rise times than the buttock condition. Most participants evaluated the hand condition as most friendly and comfortable and the robot-initiated interactions as most arousing. Interacting with Pepper improved attitudes towards robots. Our findings require future studies with larger samples and improved procedures. They have implications for robot design in all domains involving tactile interactions, such as caring and intimacy. KW - human–robot tactile interaction KW - skin conductance KW - buttocks KW - robot Pepper KW - human–robot intimate relationships Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15524 SN - 1875-4805 VL - 13 SP - 1657 EP - 1677 PB - Springer Nature ER - TY - CHAP A1 - Root, Konstantin A1 - Wiechers, Henning A1 - Azmitia, Alfredo A1 - Mohnke, Janett A1 - Müller, Christian ED - Barton, Thomas ED - Müller, Christian ED - Seel, Christian T1 - Reorganisation und Optimierung von Prozessen am Beispiel der Verwaltung von Abschlussarbeiten und des Qualitätsmonitorings von Studiengängen T2 - Hochschulen in Zeiten der Digitalisierung : Lehre, Forschung und Organisation N2 - Die internen Abläufe an Hochschulen folgen selten vordefinierten Regeln, sodass bei der Digitalisierung solcher Prozesse Standardlösungen vielfach nicht ausreichen. Für die Abbildung ehemals analoger Prozesse sind individuelle Softwarelösungen unabdingbar. In diesem Kapitel soll am Beispiel ausgewählter hochschulspezifischer Softwareanwendungen der Weg beschrieben werden, wie ein solcher Umbau im Rahmen bestehender Systeme vollzogen werden kann. Im Fokus dieser Beschreibung stehen Softwareanwendungen, die sowohl die Verwaltungsprozesse rund um die Erstellung von Thesisarbeiten – beginnend mit der Anmeldung bis zur Abgabe der Arbeit, der Durchführung von Abschlussprüfungen bis zur Publikation der Thesisarbeiten – als auch Akkreditierungsprozesse an der TH Wildau unterstützen, mit denen Modulhandbücher und Logbücher erstellt werden, die die Entwicklung von Studiengängen zwischen den Reakkreditierungen transparent nachvollziehbar machen. Ein besonderes Augenmerk wird auf Schnittstellen anderer Hochschulprozesse gelegt. Diese Anwendungen wurden mit agilen Methoden erstellt. Das Zusammenspiel von agiler Softwareentwicklung und entsprechenden Evaluationsschritten soll zeigen, wie diese Methoden an der Hochschule mit kleinen Teams effektiv eingesetzt werden können, um mit Blick auf die Verbesserung der Qualität und Einheitlichkeit von Studium und Lehre ein bestmögliches Optimierungspotenzial zu erreichen. KW - Hochschulprozess KW - Thesis KW - Qualitätssicherung KW - Akkreditierung KW - Monitoring KW - Implementierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-18320 SN - 978-3-658-26617-2 SP - 139 EP - 153 PB - Springer Vieweg CY - Berlin ER -