TY - GEN A1 - Gäbler, Anja A1 - Hendrix, Michael A1 - Herzog, Michael A1 - Geßner, Eberhard T1 - Langzeitverhalten von weichballistischen Materialien T2 - Wissenschaftliche Beiträge 2011 N2 - Dieser Aufsatz befasst sich mit dem Langzeitverhalten ballistischer Materialien. Vorrangig soll die Frage geklärt werden, ob ballistisches Material qualitätsmindernde Erscheinungen im Schutzverhalten aufweist, die mit dem fortschreitenden Alter des Materials einhergehen. Um diese Frage zu klären, wurden anhand zahlreicher Beschussversuche an polizeilichen Schutzwesten statistisch verlässliche Daten gesammelt und anschließend unter verschiedenen Blickwinkeln ausgewertet. Zusätzlich wurden verschiedene Laborversuche am Aramid-Gewebe durchgeführt. N2 - This publication deals with the long-term behavior of ballistic material. It aims to answer the question, whether ballistic material shows significant signs of a deterioration that comes with preceding age. To answer that question numerous shooting tests with bulletproof vests were made to collect statistically reliable Data. The data was then evaluated under different point of views. Additionally various laboratory experiments were performed with Aramid fibre. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus-1097 SN - 0949-8214 VL - 15 SP - 61 EP - 66 ER - TY - GEN A1 - Hendrix, Michael A1 - Herzog, Michael T1 - Schutzverhalten von weichballistischem ultrahochmolekularem Polyethylen T2 - Wissenschaftliche Beiträge 2018 N2 - Diese Publikation befasst sich mit dem Langzeitverhalten der Schutzeigenschaften von weichballistischem ultra-hochmolekularem Polyethylen. Vorrangig soll die Frage geklärt werden, ob dieses Material qualitätsmindernde Erscheinungen im Schutzverhalten aufweist, die mit seinem fortschreitenden Alter einhergehen. Um diese Frage zu klären, wurden anhand zahlreicher Beschussversuche an polizeilichen Schutzwesten und Prüfmustern statistisch verlässliche Daten gesammelt und anschließend unter verschiedenen Blickwinkeln ausgewertet. Ein wesentliches Ergebnis der Untersuchungen ist, dass sich die Schutzeigenschaften von weichballistischem ultra-hochmolekularem Polyethylen zumindest über einen Zeitraum von 30 Jahren nicht nennenswert ändern. N2 - This publication deals with the long-term behavior of the ballistic protection of ultra high molecular weight polyethylene. It aims to answer the question, whether ballistic material shows significant signs of a deterioration that comes with preceding age. To answer that question numerous shooting tests with bulletproof vests and test samples were made to collect statistically reliable data. The data then have been evaluated from different point of views. An essential result of the tests is that no appreciable deterioration of the ballistic protection can be recognized with preceding age up to 30 years. Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-10261 SN - 0949-8214 VL - 22 SP - 47 EP - 51 ER - TY - JOUR A1 - Rangelova, Nadezhda A1 - Radev, Lachezar A1 - Nenkova, Sanchi A1 - Salvado, Isabel Miranda A1 - Vas Fernandes, Maria A1 - Herzog, Michael T1 - Methylcellulose/SiO2 hybrids: sol-gel preparation and characterization by XRD, FTIR and AFM JF - Central European Journal of Chemistry N2 - Methylcellulose (MC) / SiO2 organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO2. AFM depicts surface roughness which depends on the silica precursor and MC content. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-9636 SN - 2391-5420 VL - 9 IS - 1 SP - 112 EP - 118 ER - TY - JOUR A1 - Dimitrov, Kiril A1 - Herzog, Michael A1 - Nenkova, Sanchi T1 - Fe3O4 Modification of Microcrystalline Cellulose for Composite Materials JF - American Journal of Chemistry N2 - A new synthesis method for producing cellulose ferrite micro- and nano- composites was developed and new material properties were studied. Microcrystalline cellulose was modified with a mixture of Fe+2/Fe+3 to produce surface bonded nanoparticles magnetite (Fe3O4). Optimal conditions were determined. Microsized hematite (Fe2O3) was mixed with microcrystalline cellulose and used as a reference. The magnetite modified microcrystalline cellulose and hematite filled microcrystalline cellulose were used together with polyurethane prepolymer. New composite crosslinked conductivity materials based on the magnetite modified microcrystalline or hematite filled microcrystalline cellulose and polyurethane were developed. Morphology, crystalline properties, water absorption and electro conductivity of these materials were characterized. The physical properties of these materials were characterized by different analytical methods: SEM, XRD, water absorption and electrical resistance. KW - microcrystalline cellulose KW - magnetite KW - SEM KW - XRD Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-9651 SN - 2165-8781 VL - 3 IS - 5 SP - 140 EP - 147 ER - TY - JOUR A1 - Tsonev, Tsvetomir A1 - Herzog, Michael A1 - Nenkova, Sanchi T1 - Shape memory polyurethanes based on recycled polyvinyl butyral. I. Synthesis and morphology JF - Central European Journal of Chemistry N2 - Shape memory polyurethanes (SMPUs) were synthesized by 4,4′-diphenylmethane diisocyanate (MDI), hexane-1,6-diol (HD), polypropylene glycol (PPG), and recycled polyvinyl butyral (PVB). Dynamic mechanical analysis, differential scanning calorimetry and Fourier transformation infrared attenuated total reflection spectroscopy was used to characterize the poly (vinylbutyral-urethanes). Micro-phase domain separation of hard and soft segments and phase inversion were investigated. Increasing the hard segment content, i.e., average hard segment molecular weight, leads to an increase in the degree of micro-phase separation, hard domain order and crystallinity. The crystalline hard segment structures combined with the elastic nature of soft segment matrix provide enough physical and chemical crosslinks to have shape memory effect. Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-9664 SN - 2391-5420 VL - 11 IS - 12 SP - 2058 EP - 2065 ER - TY - GEN A1 - Peshkov, Vladimir A1 - Behrendt, Gerhard A1 - Evtimova, Rozeta A1 - Herzog, Michael T1 - New Polyurethanes with a polyurea matrix T2 - Wissenschaftliche Beiträge 2012 N2 - Based on a previously published (Peshkov 2011) synthesis route of nanoscale oligourea dispersion polyols (NODP) a new type of polyurethanes with a polyurea matrix was developed. Polyurethanes with high hardness and elasticity were prepared by reacting a formulation based on the NODP’s and di- or polyisocyanates. The polyurethanes obtained as films were characterised by mechanical tests and dynamic mechanical analysis (DMA). The phase structure depends on the amount of nanoparticles present, the isocyanate index, and the mode of curing. It is suggested that nanoparticles have to be of similar size as the matrix into which they are embedded to show a typical nano- effect such as shown here. These elastic polymers show an unusual high Shore D hardness of some 70 and tensile strength up to 47 MPa at elongations at break of 7 %. N2 - Basierend auf einem bereits veröffentlichten Syntheseweg (Peshkov 2011) für nanoskalige Harnstoff Dispersions Polyole (PHD) wurde ein neuer Typ von Polyurethanen mit einer Polyharnstoff Matrix entwickelt. Durch Umsetzung der PHD’s mit Di- bzw. Polyisocyanaten wurden elastische Polyurethane mit hoher Härte erhalten. Die als Film präparierten Polyurethane wurden durch Zugprüfung und Dynamisch Mechanische Analyse (DMA) charakterisiert. Die Phasenstruktur ist abhängig von der Menge an Nanopartikeln, dem Isocyanatindex und dem Härtungsregime. Die Ergebnisse deuten daraufhin, dass die Nanopartikel, um einen typischen Nano-Effekt zu zeigen, von ähnlicher Größe sein müssen wie die Matrix, in die sie eingebettet sind. Die erhaltenen elastischen Polymere zeigen ungewöhnlich hohe Shore-D-Härten im Bereich von 70 und Zugfestigkeiten bis zu 47 MPa bzw. Bruchdehnungen von 7 %. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus-1259 SN - 0949-8214 VL - 16 SP - 93 EP - 102 ER - TY - GEN A1 - Kornejew, Eckhart A1 - Dimitrov, Kiril A1 - Herzog, Michael T1 - New aromatic polyesterpolyols derived from PET industrial wastes T2 - Wissenschaftliche Beiträge 2014 N2 - China hat den globalen Recycling-Markt letztes Jahr mit der Ankündigung geschockt, nicht länger niederwertige Qualitäten von rezyklierbaren Abfällen von ausländischen Exporteuren zu akzeptieren – die so genannte „Aktion Grüner Zaun“ startete zu Beginn des Jahres 2013. Die Antwort im Westen sollte ein Innovations- und Investitionsschub in Recycling-Technologie zur Entwicklung eines erfolgreichen Recycling-Marktes sein. Dies sollte hochentwickelte Behandlungstechnologien und installierte Anlagentechnik umfassen. Für PET-Getränkeflaschen aus den Pfandsystemen haben wir einen Prozess des rohstofflichen Recyclings entwickelt, mit dem Ausgangsstoffe für verschiedene technische Anwendungen gewonnen werden können. Die gewonnenen Aromatischen Polyesterpolyole (APP) dienen hierbei als Ausgangsstoffe zur Herstellung von Polyurethanen. N2 - China sent shock waves through the global recycling market last year when it announced it would no longer be accepting poor qualities of recyclable waste from foreign exporters – the so-called green fence action started in the beginning of year 2013. The answer should be a wave of innovation and investment in recycling technology tocatalyze successful recycling markets in the west. This could include more sophisticated handling and treatment techniques and more high-technology processing plants. In the case of PET from returnable bottles we developed a process of chemical recycling to produce feedstocks for several technical applications. Aromatic polyester polyols (APP) are a major class of raw materials to produce polyurethanes. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-3363 SN - 0949-8214 VL - 18 SP - 71 EP - 75 ER - TY - GEN A1 - Herzog, Michael A1 - Erxleben, Kurt T1 - Clusterorientierte Innovationsförderung – Praxis der InnoRegio FIRM T2 - Wissenschaftliche Beiträge 2005 N2 - Im Jahr 1999 wurde vom Bundesministerium für Bildung und Technologie (BMBF) mit dem Programm InnoRegio ein neuartiges, wettbewerbsorientiertes Förderinstrumentarium für die Neuen Bundesländer geschaffen, das insbesondere auf die Stärkung von Kernkompetenzen in den ostdeutschen Regionen zielte und der Erhöhung der Innovationskraft und Wettbewerbsfähigkeit somit einer nachhaltigen Wertschöpfung dienen sollte. Heute wird dieses Programm unter der Dachmarke „Unternehmen Region“ geführt und ist mit weiteren Programmen verbunden, die regionale Kompetenzen mit Innovationspotenzial strategisch, auf hohem technologischem Niveau und nach unternehmerischen Kriterien zu regionalen Clustern entwickeln sollen. Die Umsetzung dieses Konzepts wird weithin als einer der wenigen erfolgreichen Ansätze im „Aufbau Ost“ betrachtet [1]. Die InnoRegio „FIRM“ mit ihrer Geschäftsstelle in den Räumen der Technischen Fachhochschule Wildau ist eine von 23 InnoRegios in den ostdeutschen Ländern, die sich im Jahr 2000 in einem Auswahlverfahren unter mehr als 400 Bewerbern mit ihrem Innovationskonzept durchsetzen konnte. Als Träger hatte hierzu der Verein FIRM e.V. (Gesellschaft zur Förderung der innovativen Region Mittelostbrandenburg e. V.) das Konzept in den Landkreisen Dahme-Spreewald und Oder-Spree entwickelt. Ausgehend von Forschungserfahrungen an der Technischen Fachhochschule Wildau, dem Innovationspotential regionaler Unternehmen und der Verwaltungsexpertise der lokalen Behörden wurde ein Netzwerk konzipiert, das die Entwicklung neuer Hochleistungsmaterialien bei intelligenter Verwertung von Kunststoffabfällen in den Mittelpunkt stellt und insbesondere industrielle Reststoffe im Rahmen einer Kreislaufführung zu neuartigen Materialien umsetzt. Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-4157 SN - 0949-8214 VL - 10 SP - 8 EP - 11 ER - TY - JOUR A1 - Tsonev, Tsvetomir A1 - Herzog, Michael A1 - Nenkova, Sanchi T1 - Shape memory polyurethanes based on recycled polyvinyl butyral. I. Synthesis and morphology JF - Central European Journal of Chemistry N2 - Shape memory polyurethanes (SMPUs) were synthesized by 4,4′-diphenylmethane diisocyanate (MDI), hexane-1,6-diol (HD), polypropylene glycol (PPG), and recycled polyvinyl butyral (PVB). Dynamic mechanical analysis, differential scanning calorimetry and Fourier transformation infrared attenuated total reflection spectroscopy was used to characterize the poly (vinylbutyral-urethanes). Micro-phase domain separation of hard and soft segments and phase inversion were investigated. Increasing the hard segment content, i.e., average hard segment molecular weight, leads to an increase in the degree of micro-phase separation, hard domain order and crystallinity. The crystalline hard segment structures combined with the elastic nature of soft segment matrix provide enough physical and chemical crosslinks to have shape memory effect. KW - polyvinyl butyral KW - shape memory KW - polyurethane KW - thermal analysis KW - IR spectroscopy Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-20052 VL - 11 IS - 12 SP - 2058 EP - 2065 PB - Versita ER - TY - JOUR A1 - Bauer, Joachim A1 - Fursenko, Oksana A1 - Heinrich, Friedhelm A1 - Gutke, Marko A1 - Kornejew, Eckhart A1 - Brödel, Oliver A1 - Dietzel, Birgit A1 - Kaltenbach, Alexander A1 - Burkhardt, Martin A1 - Edling, Matthias A1 - Steglich, Patrick A1 - Herzog, Michael A1 - Schrader, Sigurd T1 - Determination of optical constants and scattering properties of transparent polymers for use in optoelectronics JF - Optical Materials Express N2 - Knowledge of optical constants, i.e. refractive index n and extinction coefficient k, and light scattering properties of optical polymers are required to optimize micro-optics for light-emitting diodes in terms of efficiency, color properties and light distribution. We present here a model-based diagnostic approach to determine the optical properties of polymers, which should be particularly useful in the development of plastics for optical applications. Optical constants and scattering coefficients were obtained from transmission and reflection measurements in a wavelength range from UV to NIR taking into account scattering effects due to rough surfaces and volume inhomogeneity. Based on the models for the dielectric function, the molecular optical transition energies Eg, critical point energies, Urbach energies and exciton transition energies were determined. Rayleigh and Mie scattering model and van de Hulst's anomalous diffraction theory were applied to characterize scattering due to volume inhomogeneities. Scalar diffraction theory was applied to account for surface roughness scattering. Atomic force microscopy with nanomechanical characterization was used to characterize domains in size and shape and to assign optical scattering to a suitable morphological model. The combined optical and mechanical characterization help to improve the qualification of new polymer materials for optical applications. KW - diffraction theory KW - light property KW - optical constant KW - optical material KW - optical property KW - scattering theory Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15666 VL - 12 IS - 1 SP - 204 EP - 224 PB - Optica Publishing Group ER -