TY - CHAP A1 - Meister, Stefan A1 - Al-Saadi, Aws A1 - Franke, Bülent A. A1 - Mahdi, Shaimaa A1 - Kuhlow, Berndt A1 - Voigt, Karsten A1 - Tillack, Bernd A1 - Richter, Harald H. A1 - Zimmermann, Lars A1 - Ksianzou, Viachaslau A1 - Schrader, Sigurd A1 - Eichler, Hans J. T1 - Photonic crystal microcavities in SOI waveguides produced in a CMOS environment N2 - We have investigated microcavities in Silicon-on-Insolator (SOI) waveguides. The rectangular waveguides with 500 nm width are fabricated in the 220 nm silicon device layer. The microcavities are formed by one-dimensional photonic crystals in Fabry-Perot structure directly written in the waveguides. The SOI photonic structures are produced in a CMOS environment using 248 nm DUV lithography, where the waveguides as well as the photonic crystals are created in the same step using a single mask. In order to achieve a desired spectral shape of the filter function capable for several applications, a number of different cavities were investigated, e.g. single cavities of first and higher order as well as multi-cavity filters. The experimental results are compared with simulations of photonic crystal microcavities in strip waveguides. The spectral transmission function of such filters dependent on the design parameters are calculated by an analysis based on Finite-Difference-Time-Domain (FDTD) method. KW - silicon photonics KW - SOI waveguide KW - photonic crystal KW - band-pass filter KW - microcavity KW - FDTD simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15223 SP - 330 EP - 339 PB - Society of Photo-Optical Instrumentation Engineers (SPIE) ER - TY - CHAP A1 - Meister, Stefan A1 - Al-Saadi, Aws A1 - Franke, Bülent A. A1 - Mahdi, Shaimaa A1 - Szczambura, Miroslaw A1 - Kuhlow, Berndt A1 - Woggon, Ulrike A1 - Zimmermann, Lars A1 - Richter, Harald H. A1 - Stolarek, David A1 - Schrader, Sigurd A1 - Eichler, Hans J. T1 - Micro-cavities based on width modulated SOI waveguides N2 - We have designed, fabricated and investigated one-dimensional (1D) micro-cavities in Silicon-on-Insulator (SOI) waveguides. The single mode waveguides are fabricated in a 220 nm silicon device layer. The 1D micro-cavities in Fabry-Perot structure consist of two Bragg-mirror regions formed by a sinusoidal modulation of the waveguide width. The mirror regions are separated by a sub-micron spacer. The SOI photonic structures are produced in a CMOS environment using 248 nm DUV lithography. The waveguides as well as the width modulated mirror regions are designed using a single mask and are fabricated in a shallow trench process. The transmission spectra of these width modulated micro-cavities with different mirror reflectivities and cavity lengths are investigated. Q-factors up to 855 could be observed at 1550 nm wavelength with low insertion loss of 1.9 dB. The width modulated micro-cavities, including the mirror regions, have lengths of less than 20 microns and widths of maximum 450 nm. These small foot-print cavities act as band pass filters and can be used as resonators for laser or electro-optic modulation of light. KW - silicon photonics KW - CMOS KW - SOI waveguide KW - micro-cavity KW - micro-resonator KW - band-pass filter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-15233 SP - 199 EP - 204 PB - Society of Photo-Optical Instrumentation Engineers (SPIE) ER -