@misc{StarkMartiniWernecke2000, author = {Stark, Bernd and Martini, Lothar and Wernecke, Roland}, title = {Ein Ethylen-Meßger{\"a}t auf der Basis der Chemilumineszenz}, series = {Wissenschaftliche Beitr{\"a}ge 1/2000}, volume = {5}, journal = {Wissenschaftliche Beitr{\"a}ge 1/2000}, number = {1}, issn = {0949-8214}, doi = {10.15771/0949-8214_2000_1_6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-7287}, pages = {45 -- 51}, year = {2000}, abstract = {Ethylen (C2H4) geh{\"o}rt chemisch Zu den Alkenen und ist ein farbloses, erd{\"o}lartig riechendes Gas. Es ist gekennzeichnet durch eine "unges{\"a}ttigte" Kohlenstoff-Kohlenstoff-Bindung, die verantwortlich ist f{\"u}r seine hohe Reaktivit{\"a}t. Ethylen kommt in der Atmosph{\"a}re in einem Mischungsverh{\"a}ltnis vor, dessen Bereich sich von der Nachweisgrenze bei ca. 2 ppb in eher l{\"a}ndlichen Gebieten bis zu Spitzenkonzentrationen von mehr als 50 ppb in Stadtkernen erstreckt. Seine Herkunft ist sowohl nat{\"u}rlicher als auch anthropogener Natur. Nat{\"u}rlich entsteht Ethylen als Reifegas beim normalen Stoffwechselvorgang in Fr{\"u}chten und Pflanzen. Anthropogen wird es in die Atmosph{\"a}re als Hauptkomponente der Abgase von Verbrennungsmotoren emittiert. Das Problem des optimalen Transportes von S{\"u}dfr{\"u}chten auf Schiffen ist eine Frage der Bereitstellung einer geeigneten Transportatmosph{\"a}re (controlled atmosphere-CA) auf K{\"u}hl- und K{\"u}hlcontainerschiffen. Das wiederum ist mit sehr energieintensiven Maßnahmen verbunden und damit eine Frage der Wirtschaftlichkeit. Um einen optimalen Transport der Fr{\"u}chte {\"u}ber einen l{\"a}ngeren Zeitraum zu gew{\"a}hrleisten, ist eine kontinuierliche bis quasi kontinuierliche Messung der Ethylenkonzentration der K{\"u}hlcontainerluft bzw. der Atmosph{\"a}re in den K{\"u}hlschiffen im Sinne einer optimalen Einstellung des Ethylengehaltes der Luft erforderlich. Dazu ist eine Meßtechnik n{\"o}tig, die kontinuierlich im Spurenbereich Meßdaten liefert. Diese Meßtechnik muß außerdem robust und unter extremen Bedingungen, wie z.B. hohen Temperaturen und hoher Luftfeuche, einsatzf{\"a}hig und dazu von Personal bedienbar sein, das nicht f{\"u}r den Umgang mit dieser Meßtechnik ausgebildet ist. Eine weitere wesentliche Forderung an die Meßtechnik besteht darin, daß das Ger{\"a}t auch {\"u}ber einen l{\"a}ngeren Zeitraum wartungsfrei und zuverl{\"a}ssig im Rahmen der geforderten Genauigkeit funktioniert. In der vorliegenden Arbeit wird ein Ethylen-Meßger{\"a}t vorgestellt, das auf dem Prinzip der Chemilumineszenz beruht und selektiv und kontinuierlich die Messung der Ethylen-Konzentration gestattet. Dazu ist dieses Ger{\"a}t weitgehend den auf K{\"u}hlschiffen herrschenden Bedingungen angepaßt.}, language = {de} } @misc{BehrendtPohlWagneretal.2000, author = {Behrendt, Gerhard and Pohl, Martin and Wagner, Peter and Huth, Hannelore and Schmidt, Karl-Heinz}, title = {Drei neue Synthesewege zur Herstellung von Polyolen f{\"u}r Polyurethane}, series = {Wissenschaftliche Beitr{\"a}ge 1/2000}, volume = {5}, journal = {Wissenschaftliche Beitr{\"a}ge 1/2000}, number = {1}, issn = {0949-8214}, doi = {10.15771/0949-8214_2000_1_9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-7313}, pages = {73 -- 78}, year = {2000}, abstract = {Auf der Grundlage des Gesetzes zur F{\"o}rderung der Kreislaufwirtschaft und Sicherung der umweltvertr{\"a}glichen Beseitigung von Abf{\"a}llen (KrW-/AbfG) fordert der Gesetzgeber eine zunehmende Verwertung von Abf{\"a}llen und die auf Grund von Verordnungen oder freiwilligen R{\"u}cknahmeverptlichtungen der Industrie existierenden Verwertungsquoten einzuhalten. Eine Verordnung, die f{\"u}r dieses Thema von Bedeutung ist, ist die Verordnung {\"u}ber die Vermeidung von Verpackungsabf{\"a}llen (VerpackV), eine weitere ist die freiwillige R{\"u}cknahmeverpflichtung der Industrie f{\"u}r Altkraftfahrzeuge. Nach der VerpackV hat die Duales System Deutschland GmbH (DSD) als Garantiegeber zur Einhaltung der Verordnung f{\"u}r Kunststoffe aus der Sammlung eine Verwertungsquote von 72\% garantiert. Das bedeutet, daß j{\"a}hrlich ca. 800.000 t Kunststoffe aus der Verpackung verwertet werden m{\"u}ssen. Da in zunehmendem Maße Kunststoffe eingesetzt werden, steigt diese Menge, insbesondere bei den Kunststoffflaschen. In diesem Kunststoffabfall sind alle Massenkunststoffe, dazu noch Verbundwerkstoffe und Gummi enthalten. W{\"a}hrend die Polyolefine (Polypropylen und Polyethylen) durch Schwimm-Sink-Trennung weitestgehend abgetrennt werden k{\"o}nnen, gibt es derzeit f{\"u}r die restlichen Kunststoffe keine Verwertungsverfahren. In diesem Rest, j{\"a}hrlich ca. 135.000 t, sind jedoch wertvolle Materialien, vor allem Polyethylenterephthalat (PET) enthalten. Die PET-Menge macht hier mit ca. 65.000 t/a auch die gr{\"o}ßte Menge aus.}, language = {de} } @misc{FriedrichWigantUngeretal.1995, author = {Friedrich, J{\"o}rg and Wigant, Lothar and Unger, Wolfgang and Lippitz, Andreas and Ceng, Sh. and Erdmann, J. and Gorsler, H.-V.}, title = {Neue Erkenntnisse zur Plasmamodifizierung von Polymeroberfl{\"a}chen}, series = {Wissenschaftliche Beitr{\"a}ge 1/1995}, volume = {1}, journal = {Wissenschaftliche Beitr{\"a}ge 1/1995}, number = {1}, issn = {0949-8214}, doi = {10.15771/0949-8214_1995_7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-8013}, pages = {36 -- 42}, year = {1995}, abstract = {Die Benetz-, Verkleb- und Metallisierung von Polymeren mit niedriger Oberfl{\"a}chenenergie kann mit gen{\"u}gend hoher Geschwindigkeit nur in elektrischen Entladungen erreicht werden. Verweilzeiten von etwa 0,01 bis 10 s in oxidierenden Plasmen elektrischer Entladungen sind dazu notwendig. Auch die Effektivit{\"a}t der Modifizierung in einer elektrischen Entladung {\"u}bertrifft in der Regel die Wirkung chemischer oder physikalischer Verfahren.}, language = {de} } @misc{Hellwig1995, author = {Hellwig, Udo}, title = {Orientierende Untersuchungen zur elektrokinetischen Sicherung kontaminierter Standorte}, series = {Wissenschaftliche Beitr{\"a}ge 1/1995}, volume = {1}, journal = {Wissenschaftliche Beitr{\"a}ge 1/1995}, number = {1}, issn = {0949-8214}, doi = {10.15771/0949-8214_1995_9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-8037}, pages = {51 -- 56}, year = {1995}, abstract = {Forschungsprojekte aus den USA und den Niederlanden haben die vielseitige Einsetzbarkeit der Elektrokinetik bereits bewiesen. Erfolgreich eingesetzt wurde die Methode z. B. in den USA als Pr{\"a}ventivmaßnahme zum Schutz des Grundwassers im An- und Abstrombereich von Deponien. Beprobungen von Boden und Grundwasser auf dem Gel{\"a}nde der TFH Wildau ergaben Schadstoffkonzentrationen, die die Grenz-/Richtwerte zum Teil um mehr als das 1000-fache {\"u}bersteigen. Die gr{\"o}ßten bisher festgestellten Arsenkonzentrationen betragen 51.000 µg/l (Grenzwert 60 µg/l); an dieser Stelle ist die elektrische Leitf{\"a}higkeit des Grundwassers gr{\"o}ßer als 20.000 µS/cm (Normalwerte liegen zwischen 500 und 1.33 µS/cm). Da insbesondere Arsen in Boden und Grundwasser sehr mobil ist, ist davon auszugehen, daß das Grundwasser in einem gr{\"o}ßeren Bereich kontaminiert ist. Die Quellorte des Schadstoffeintrags sind z. Z. noch nicht hinreichend erfaßt. Dazu w{\"a}ren z. B. fl{\"a}chendeckende geophysikalische Kartierungen erforderlich. Vorbereitend dazu wurde im Rahmen des beantragten Projekts eine geophysikalische Untersuchung des Flurst{\"u}cks 480/2 (ehemaliges Sportplatzgel{\"a}nde) auf dem Gel{\"a}nde der TFH Wildau durchgef{\"u}hrt. Aus den Untersuchungen geht ein unmittelbarer Handlungsbedarf hervor.}, language = {de} } @misc{MeyerSchmadlAbramowski1998, author = {Meyer, Eckhard and Schmadl, Josef and Abramowski, Stephan}, title = {Extraktion und Trocknung von Krappwurzel-Farbstoff}, series = {Wissenschaftliche Beitr{\"a}ge 2/1998}, volume = {4}, journal = {Wissenschaftliche Beitr{\"a}ge 2/1998}, number = {2}, issn = {0949-8214}, doi = {10.15771/0949-8214_1998_2_15}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-7606}, pages = {83 -- 88}, year = {1998}, abstract = {Farbstoffe aus den Wurzeln der Rubia tinctorum und anderer Krapp-Sorten z{\"a}hlten {\"u}ber Jahrtausende zu den wichtigsten Textilfarbstoffen. Sie wurden jedoch - bis auf einige Spezialanwendungen - von den preisg{\"u}nstigeren synthetischen Farbstoffen verdr{\"a}ngt. Ein neues Umwelt- und Gesundheitsbewußtsein der Menschen f{\"u}hrt neuerdings dazu, daß Pflanzenfarbstoffe seit einigen Jahren in besonderen Anwendungsbereichen der Textilienf{\"a}rberei wieder zunehmend im industriellen Maßstab Interesse finden.}, language = {de} } @misc{TillichGrueberFrohme2012, author = {Tillich, Ulrich M. and Gr{\"u}ber, Stefanie and Frohme, Marcus}, title = {Etablierung von Hochdurchsatz-Kultivierungs- und -Screeningmethoden f{\"u}r phototrophe Einzeller}, series = {Wissenschaftliche Beitr{\"a}ge 2012}, volume = {16}, journal = {Wissenschaftliche Beitr{\"a}ge 2012}, issn = {0949-8214}, doi = {10.15771/0949-8214_2012_1_4}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus-1335}, pages = {31 -- 36}, year = {2012}, abstract = {Mit Hochdurchsatz-Kultivierungs- und -Screeningmethoden k{\"o}nnen viele Proben parallel, miniaturisiert und kosteng{\"u}nstig bearbeitet werden. F{\"u}r phototrophe Organismen wie Mikroalgen und Cyanobakterien sind Hochdurchsatz-Kultivierungsverfahren jedoch bis heute kaum etabliert. Im Rahmen dieser Arbeit wurden diese Verfahren beispielhaft f{\"u}r das Cyanobakterium Synechocystis sp. PCC 6803 etabliert. Die ben{\"o}tigte technische Automatisierung wurde hierbei durch den Einsatz eines Tecan Genesis RSP 150 Pipettierroboters erreicht. Die Kultivierung erfolgte in Deepwell-Mikrotiterplatten innerhalb einer speziell angefertigten Kammer mit programmierbaren Sch{\"u}ttlern, einstellbarer Belichtung und CO2-Atmosph{\"a}re. Die in diesem System erreichten Wachstumsraten sind vergleichbar mit publizierten Kultivierungsmethoden. Das Hochdurchsatz-Screening wurde mit Hilfe eines in den Roboter integrierten Tecan Genios Plus Plattenreaders durchgef{\"u}hrt. Es wurden beispielhaft Methoden zur Bestimmung von optischer Dichte und Chlorophyllgehalt etabliert. Die hier vorgestellte Plattform kann vielseitig zur Analyse phototropher Organismen eingesetzt werden und ist durch entsprechende Assays leicht zur Messung anderer Parameter erweiterbar.}, language = {de} } @article{TillichWolterFrankeetal.2014, author = {Tillich, Ulrich M. and Wolter, Nick and Franke, Philipp and D{\"u}hring, Ulf and Frohme, Marcus}, title = {Screening and genetic characterization of thermo-tolerant Synechocystis sp. PCC6803 strains created by adaptive evolution}, series = {BMC Biotechnology}, volume = {14}, journal = {BMC Biotechnology}, number = {66}, issn = {1472-6750}, doi = {10.1186/1472-6750-14-66}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-6014}, pages = {15}, year = {2014}, abstract = {Temperature tolerance is an important aspect for commercial scale outdoor cultivation of microalgae and cyanobacteria. While various genes are known to be related to Synechocystis sp. PCC6803's heat shock response, there is very limited published data concerning the specific genes involved in long term thermal tolerance. We have previously used random mutagenesis and adaptive evolution to generate a mixture of strains of Synechocystis sp. PCC6803 with significantly increased thermal tolerance. The genetic modifications leading to the phenotypes of the newly generated strains are the focus of this work.}, language = {en} } @article{SeifertThiemannPospisiletal.2012, author = {Seifert, Felix and Thiemann, Alexander and Pospisil, Heike and Scholten, Stefan}, title = {Re-annotation of the maize oligonucleotide array}, series = {Maydica}, volume = {57}, journal = {Maydica}, number = {1}, issn = {0025-6153}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-6178}, pages = {49 -- 55}, year = {2012}, abstract = {The microarray technology has become an established approach for large-scale gene expression analysis with mature protocols for sample, microarray, and data processing. The maize oligonucleotide array (maizearray) is one of the few microarray platforms designed for genome-wide gene expression analysis in Zea mays L. Many datas-ets addressing various genetic, physiological and developmental topics generated with this platform are available. The original 57,452 microarray probes were compiled based on expressed sequence tags (ESTs). Meanwhile the maize genome sequence became available providing the possibility for an improved annotation of the microar-ray probe set. In this study we determined the genome positions of all maizearray probes to obtain current gene annotations and generated current Gene Ontology (GO) annotations. These new data allow tracing redundancy of the probe set and interfering cross-hybridizations, and doubled the number of genes with functional GO data. Our re-annotation will largely improve the functional analysis of available and future datasets generated on this microarray platform.}, language = {en} } @article{SchulzeLopezTillichetal.2011, author = {Schulze, Katja and L{\´o}pez, Diana A. and Tillich, Ulrich M. and Frohme, Marcus}, title = {A simple viability analysis for unicellular cyanobacteria using a new autofluorescence assay, automated microscopy, and ImageJ}, series = {BMC Biotechnology}, volume = {11}, journal = {BMC Biotechnology}, number = {118}, issn = {1472-6750}, doi = {10.1186/1472-6750-11-118}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-6192}, pages = {8}, year = {2011}, abstract = {Currently established methods to identify viable and non-viable cells of cyanobacteria are either time-consuming (eg. plating) or preparation-intensive (eg. fluorescent staining). In this paper we present a new and fast viability assay for unicellular cyanobacteria, which uses red chlorophyll fluorescence and an unspecific green autofluorescence for the differentiation of viable and non-viable cells without the need of sample preparation.}, language = {en} } @article{BoehmeSchuetzeSaueretal.2018, author = {B{\"o}hme, Andrea and Sch{\"u}tze, Felix and Sauer, Sabine and Foitzik, Andreas}, title = {Fabrication and Validation by Micromilling for Bioreactor Prototyping}, series = {Materials Science Forum}, volume = {941}, journal = {Materials Science Forum}, publisher = {Trans Tech Publications}, issn = {0255-5476}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-18699}, pages = {2448 -- 2453}, year = {2018}, abstract = {Bioreactor systems for cultivating cells in Life Sciences have been widely used for decades. Recently, there is a trend towards miniaturization, disposables and even micro platforms that fulfill increasing demands strongly aiming for production and testing of novel pharmaceutical products. Miniaturized bioreactors allow low power consumption, portability and reduced space requirements and utilize smaller volumes of reagents and samples [1,2]. A recursive strategy is necessary for optimizing the design and the manufacture of such miniaturized bioreactors. For the fabrication of these prototypes utilized micro-milling. Micro milling is a mechanical process which is commonly applied to create micro-structures in metals, e.g. aluminum and steel, or polymers, e.g. poly carbonate substrates. The structures and geometries are generated by utilizing computer aided design. By means of computer-aided manufacturing, the machining operations are implemented and then transferred to the machine tool. The machine tool moves the cutting tools with certain speeds, feeds and traverse ranges to the substrate. Micro milling has the advantage that the materials are generally not degraded by chemical substances, heating procedures or electromagnetic radiation.}, language = {en} } @article{RiedelHoefsRuffetal.2021, author = {Riedel, Marc and H{\"o}fs, Soraya and Ruff, Adrian and Schuhmann, Wolfgang and Lisdat, Fred}, title = {A Tandem Solar Biofuel Cell: Harnessing Energy from Light and Biofuels}, series = {Angewandte Chemie International Edition}, volume = {60}, journal = {Angewandte Chemie International Edition}, number = {4}, publisher = {Wiley}, issn = {1521-3773}, doi = {10.1002/anie.202012089}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13680}, pages = {2078 -- 2083}, year = {2021}, abstract = {We report on a photobioelectrochemical fuel cell consisting of a glucose-oxidase-modified BiFeO3 photobiocathode and a quantum-dot-sensitized inverse opal TiO2 photobioanode linked to FAD glucose dehydrogenase via a redox polymer. Both photobioelectrodes are driven by enzymatic glucose conversion. Whereas the photobioanode can collect electrons from sugar oxidation at rather low potential, the photobiocathode shows reduction currents at rather high potential. The electrodes can be arranged in a sandwich-like manner due to the semi-transparent nature of BiFeO3, which also guarantees a simultaneous excitation of the photobioanode when illuminated via the cathode side. This tandem cell can generate electricity under illumination and in the presence of glucose and provides an exceptionally high OCV of about 1 V. The developed semi-artificial system has significant implications for the integration of biocatalysts in photoactive entities for bioenergetic purposes, and it opens up a new path toward generation of electricity from sunlight and (bio)fuels.}, language = {en} } @misc{GerkingSchmadl2003, author = {Gerking, Jens-Uwe and Schmadl, Josef}, title = {Berechnungsmodell f{\"u}r die Elektrodialyse von Salzl{\"o}sungen}, series = {Wissenschaftliche Beitr{\"a}ge 2003}, volume = {8}, journal = {Wissenschaftliche Beitr{\"a}ge 2003}, issn = {0949-8214}, doi = {10.15771/0949-8214_2003_1_5}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-3800}, pages = {26 -- 30}, year = {2003}, abstract = {Elektromembranverfahren spielen eine wichtige Rolle in nat{\"u}rlichen Vorg{\"a}ngen, wie z. B. bei der Ern{\"a}hrung von Gehirnzellen, und sind von der Solarenergienutzung (elektrolytische Wasserstofferzeugung) und der elektrischen Energieerzeugung (PEM-Brennstoffzelle) {\"u}ber Abwasserreinigung, Wasserentsalzung und Wertstoffr{\"u}ckgewinnung (Elektrodialyse mit bipolaren Membranen oder mit Ionenaustausch) bis hin zum Einsatz in chemischen Syntheseverfahren auch technisch vielseitig einsetzbar. Sie sind aber noch wenig bekannt und l{\"a}ngst nicht ausreichend erforscht. Mit dieser Arbeit soll ein Beitrag geleistet werden zur mathematischen Modellierung der Elektrodialyse mit Ionenaustauschermembranen.}, language = {de} } @misc{SarauliXuDietzeletal.2014, author = {Sarauli, David and Xu, Chenggang and Dietzel, Birgit and Schulz, Burkhard and Lisdat, Fred}, title = {Effekt unterschiedlich substituierter sulfonierter Polyaniline auf den Elektronentransfer mit pyrrolochinolinchinonabh{\"a}ngiger Glukosehydrogenase}, series = {Wissenschaftliche Beitr{\"a}ge 2014}, volume = {18}, journal = {Wissenschaftliche Beitr{\"a}ge 2014}, issn = {0949-8214}, doi = {10.15771/0949-8214_2014_1_1}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-3285}, pages = {7 -- 15}, year = {2014}, abstract = {Sulfonierte Polyaniline erwiesen sich bereits als geeignete Polymere f{\"u}r den Aufbau von Biosensoren. Aus diesem Grund setzten wir unterschiedlich substituierte Polymerformen f{\"u}r die Untersuchungen der direkten Elektronen{\"u}bertragung zum Redoxenzym PQQ-GDH (Pyrrolochinolinchinon-abh{\"a}ngige Glukosedehydrogenase) ein. Daf{\"u}r wurden zuerst neue Copolymere synthetisiert. Als Basis f{\"u}r die Synthesen wurden 2-Methoxyanilin-5-Sulfons{\"a}ure (MAS), 3-Aminobenzensulfons{\"a}ure (ABS), 3-Aminobenzoes{\"a}ure (AB) und Anilin (AN) ausgew{\"a}hlt und deren Verh{\"a}ltnisse variiert. Alle Copolymere wurden hinsichtlich der direkten Reaktion mit PQQ-GDH untersucht. Diese Wechselwirkung wurde zun{\"a}chst in L{\"o}sung, anschließend auch auf Elektroden beobachtet. Die Ergebnisse zeigen, dass nur die aus MAS- und AN-Einheiten bestehenden Copolymere in der Lage sind, mit dem Enzym in L{\"o}sung direkt zu interagieren, was wahrscheinlich dem Emeraldin Salz (ES) Redoxzustand des Polymers zuzuschreiben ist. Immobilisiert man die Polymere und das Enzym auf Kohlenstoffnanor{\"o}hrenbasierten Elektroden, generiert man direkte Bioelektrokatalyse auch im Falle der aus ABS/AB- und MAS/AB-Einheiten bestehenden Copolymere, die sich nach der Synthese im Pernigranilin Base (PB) Redoxzustand befinden. Im Gegensatz zur Situation in L{\"o}sung kann auf Elektroden das Potential zus{\"a}tzlich genutzt werden, um Elektronen vom Enzym auf das Polymer zu {\"u}bertragen. Solche Polymerbasierten Enzymelektroden besitzen Anwendungspotential in der Sensorik, aber auch in Biobrennstoffzellen.}, language = {de} } @misc{LorkoOravecSchmidtetal.2003, author = {Lorko, Martin and Oravec, Peter and Schmidt, Karl-Heinz and Hunger, Hans-Dieter and Behrendt, Gerhard}, title = {Por{\"o}se Sinterkeramikformstoffe mit katalytischer Wirkung durch thermische Behandlung von mit Zeolithen hochgef{\"u}llten Schaumstoffen auf der Basis von Recyclaten}, series = {Wissenschaftliche Beitr{\"a}ge 2003}, volume = {8}, journal = {Wissenschaftliche Beitr{\"a}ge 2003}, issn = {0949-8214}, doi = {10.15771/0949-8214_2003_1_8}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-3835}, pages = {41 -- 45}, year = {2003}, abstract = {Por{\"o}se Sinterkeramikwerkstoffe mit unterschiedlichen Porenstrukturen werden heute in vielen Bereichen der Wirtschaft eingesetzt, z. B. als Trennmembranen, als Katalysatortr{\"a}ger, als Tr{\"a}germaterialien in der Biotechnologie. Dabei sind zwei Arten von Sinterkeramiken zu unterscheiden: zum einen wabenf{\"o}rmige Sinterkeramiken und zum anderen schaumf{\"o}rmige Sinterkeramiken. Die wabenf{\"o}rmigen, oft als Strang hergestellten Sinterkeramiken, werden in immer gr{\"o}ßerem Maße als Trennmedien, z. B. in der Wasser- und Abluftreinigung, verwendet. Sie sollen hier jedoch nicht weiter betrachtet werden. Die schaumf{\"o}rmigen Sinterkeramiken mit unterschiedlich großer Zellgr{\"o}ße bzw. Zellgr{\"o}ßenverteilung werden als Tr{\"a}ger oder als Hochtemperaturisolation eingesetzt. Sie werden nach zwei verschiedenen Technologien hergestellt: zum einen durch die F{\"u}llung der keramischen Massen mit organischem Material, das beim Brennprozess verdampft wird, und zum anderen durch Beschichten von Schaumstoffen mit Keramikschl{\"a}mmen und deren Brennen, wobei w{\"a}hrend des Brennens das organische Schaummaterial verdampft wird.}, language = {de} } @misc{LoosSchmadl2005, author = {Loos, Timo and Schmadl, Josef}, title = {Zur Modellierung der chemischen Absorption im Strahlw{\"a}scher}, series = {Wissenschaftliche Beitr{\"a}ge 2005}, volume = {10}, journal = {Wissenschaftliche Beitr{\"a}ge 2005}, issn = {0949-8214}, doi = {10.15771/0949-8214_2005_1_17}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-4309}, pages = {93 -- 97}, year = {2005}, abstract = {In Zeiten globaler Erw{\"a}rmung und stetig steigender Umweltverschmutzungen spielt der Umweltschutz eine immer st{\"a}rkere Rolle. Im Mittelpunkt der gesellschaftlichen Diskussion stehen dabei besonders Rauchgase, die bei der Verbrennung fossiler Energietr{\"a}ger zur Energieerzeugung oder in M{\"u}llverbrennungsanlagen entstehen. Diese sind mit Flugasche, Staub und Schwermetallen und Sauergasen belastet. Vor allem die Sauergase wie Schwefeldioxid, Schwefelwasserstoff, Chlorwasserstoff und Kohlendioxid sind als kritisch zu betrachten. Das industriell am h{\"a}ufigsten angewandte Verfahren f{\"u}r die Sauergasabtrennung ist die chemische Absorption. Als Waschmittel werden basisch wirkende w{\"a}ssrige L{\"o}sungen eingesetzt.}, language = {de} } @article{KhalidGoebelHuehnetal.2011, author = {Khalid, Waqas and G{\"o}bel, Gero and H{\"u}hn, Dominik and Montenegro, Jose-Maria and Rivera-Gil, Pilar and Lisdat, Fred and Parak, Wolfgang J.}, title = {Light triggered detection of aminophenyl phosphate with a quantum dot based enzyme electrode}, series = {Journal of Nanobiotechnology}, volume = {9}, journal = {Journal of Nanobiotechnology}, number = {46}, issn = {1477-3155}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-5808}, pages = {10}, year = {2011}, abstract = {An electrochemical sensor for p-aminophenyl phosphate (p APP) is reported. It is based on the electrochemical conversion of 4-aminophenol (4AP) at a quantum dot (QD) modified electrode under illumination. Without illumination no electron transfer and thus no oxidation of 4AP can occur. p APP as substrate is converted by the enzyme alkaline phosphatase (ALP) to generate 4AP as a product. The QDs are coupled via 1,4-benzenedithiol (BDT) linkage to the surface of a gold electrode and thus allow potential-controlled photocurrent generation. The photocurrent is modified by the enzyme reaction providing access to the substrate detection. In order to develop a photobioelectrochemical sensor the enzyme is immobilized on top of the photo-switchable layer of the QDs. Immobilization of ALP is required for the potential possibility of spatially resolved measurements. Geometries with immobilized ALP are compared versus having the ALP in solution. Data indicate that functional immobilization with layer-by-layer assembly is possible. Enzymatic activity of ALP and thus the photocurrent can be described by Michaelis- Menten kinetics. p APP is detected as proof of principle investigation within the range of 25 μM - 1 mM.}, language = {en} } @article{FeifelLisdat2011, author = {Feifel, Sven Christian and Lisdat, Fred}, title = {Silica nanoparticles for the layer-by-layer assembly of fully electro-active cytochrome c multilayers}, series = {Journal of Nanobiotechnology}, volume = {9}, journal = {Journal of Nanobiotechnology}, number = {59}, issn = {1477-3155}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-5819}, pages = {12}, year = {2011}, abstract = {For bioanalytical systems sensitivity and biomolecule activity are critical issues. The immobilization of proteins into multilayer systems by the layer-by-layer deposition has become one of the favorite methods with this respect. Moreover, the combination of nanoparticles with biomolecules on electrodes is a matter of particular interest since several examples with high activities and direct electron transfer have been found. Our study describes the investigation on silica nanoparticles and the redox protein cytochrome c for the construction of electro-active multilayer architectures, and the electron transfer within such systems. The novelty of this work is the construction of such artificial architectures with a non-conducting building block. Furthermore a detailed study of the size influence of silica nanoparticles is performed with regard to formation and electrochemical behavior of these systems.}, language = {en} } @article{HeinsohnNiedlAnielskietal.2022, author = {Heinsohn, Natascha Katharina and Niedl, Robert Raimund and Anielski, Alexander and Lisdat, Fred and Beta, Carsten}, title = {Electrophoretic µPAD for Purification and Analysis of DNA Samples}, series = {Biosensors}, volume = {12}, journal = {Biosensors}, number = {2}, publisher = {MDPI}, issn = {2079-6374}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-15763}, year = {2022}, abstract = {In this work, the fabrication and characterization of a simple, inexpensive, and effective microfluidic paper analytic device (µPAD) for monitoring DNA samples is reported. The glass microfiber-based chip has been fabricated by a new wax-based transfer-printing technique and an electrode printing process. It is capable of moving DNA effectively in a time-dependent fashion. The nucleic acid sample is not damaged by this process and is accumulated in front of the anode, but not directly on the electrode. Thus, further DNA processing is feasible. The system allows the DNA to be purified by separating it from other components in sample mixtures such as proteins. Furthermore, it is demonstrated that DNA can be moved through several layers of the glass fiber material. This proof of concept will provide the basis for the development of rapid test systems, e.g., for the detection of pathogens in water samples.}, language = {en} } @article{MitrovićSiewertDuduketal.2014, author = {Mitrović, Jelena and Siewert, Christin and Duduk, Bojan and Hecht, Jochen and M{\"o}lling, Karin and Broecker, Felix and Beyerlein, Peter and B{\"u}ttner, Carmen and Bertaccini, Assunta and Kube, Michael}, title = {Generation and Analysis of Draft Sequences of 'Stolbur' Phytoplasma from Multiple Displacement Amplification Templates}, series = {Journal of Molecular Microbiology and Biotechnology}, volume = {24}, journal = {Journal of Molecular Microbiology and Biotechnology}, number = {1}, issn = {1660-2412}, doi = {10.1159/000353904}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-10959}, pages = {1 -- 11}, year = {2014}, abstract = {Phytoplasma-associated diseases are reported for more than 1,000 plant species worldwide. Only a few genome sequences are available in contrast to the economical importance of these bacterial pathogens. A new strategy was used to retrieve phytoplasma strain-specific genome data. Multiple displacement amplification was performed on DNA obtained from <3 g of plant tissue from tobacco and parsley samples infected with 'stolbur' strains. Random hexamers and Phi29 polymerase were evaluated with and without supplementation by group-assigned oligonucleotides providing templates for Illumina's sequencing approach. Metagenomic drafts derived from individual and pooled strain-specific de novo assemblies were analyzed. Supplementation of the Phi29 reaction with the group-assigned oligonucleotides resulted in an about 2-fold enrichment of the percentage of phytoplasma-assigned reads and thereby improved assembly results. The obtained genomic drafts represent the largest datasets available from 'stolbur' phytoplasmas. Sequences of the two strains (558 kb, 448 proteins and 516 kb, 346 proteins, respectively) were annotated allowing the identification of prominent membrane proteins and reconstruction of core pathways. Analysis of a putative truncated sucrose phosphorylase provides hints on sugar degradation. Furthermore, it is shown that drafts obtained from repetitive-rich genomes allow only limited analysis on multicopy regions and genome completeness.}, language = {en} } @misc{Wilkow1996, author = {Wilkow, Gennadi}, title = {Optimierung von chemisch-technologischen Systemen zur Stofftrennung}, series = {Wissenschaftliche Beitr{\"a}ge 1/1996}, volume = {2}, journal = {Wissenschaftliche Beitr{\"a}ge 1/1996}, number = {1}, issn = {0949-8214}, doi = {10.15771/0949-8214_1996_10}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-8205}, pages = {52 -- 53}, year = {1996}, abstract = {In der vorliegenden Arbeit wird eine Klasse von chemisch-technologischen Trennsystemen (CTTS) behandelt, in denen Standardprozesse der chemischen Technologie ablaufen: Rektifikation, Absorption, Desorption u. a. Die Systeme trennen nahezu ideale Mehrstoffgemische.}, language = {de} } @article{SandigvonHorstenRadkeetal.2017, author = {Sandig, Grit and von Horsten, Hans Henning and Radke, Lars and Blanchard, V{\´e}ronique and Frohme, Marcus and Giese, Christoph and Sandig, Volker and Hinderlich, Stephan}, title = {Engineering of CHO Cells for the Production of Recombinant Glycoprotein Vaccines with Xylosylated N-glycans}, series = {Bioengineering}, volume = {4}, journal = {Bioengineering}, number = {2}, issn = {2306-5354}, doi = {10.3390/bioengineering4020038}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-9620}, year = {2017}, abstract = {Xylose is a general component of O-glycans in mammals. Core-xylosylation of N-glycans is only found in plants and helminth. Consequently, xylosylated N-glycans cause immunological response in humans. We have used the F-protein of the human respiratory syncytial virus (RSV), one of the main causes of respiratory tract infection in infants and elderly, as a model protein for vaccination. The RSV-F protein was expressed in CHO-DG44 cells, which were further modified by co-expression of β1,2-xylosyltransferase from Nicotiana tabacum. Xylosylation of RSV-F N-glycans was shown by monosaccharide analysis and MALDI-TOF mass spectrometry. In immunogenic studies with a human artificial lymph node model, the engineered RSV-F protein revealed improved vaccination efficacy.}, language = {en} } @article{MatuschekLiebscherSantoetal.2018, author = {Matuschek, Nelson and Liebscher, Thilo and Santo, Loredana and Foitzik, Andreas}, title = {Online Glucose Measurement in DMEM for In Vitro Cell Culture}, series = {Materials Science Forum}, volume = {941}, journal = {Materials Science Forum}, publisher = {Trans Tech Publications}, issn = {0255-5476}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-18734}, pages = {2501 -- 2506}, year = {2018}, abstract = {In-vitro cell culture offers the ability to grow individual cells and monitor their behaviour in a controlled environment over a certain time. During culture, different parameters have to be controlled to ensure a vital growth of cells. The most important parameters are temperature, pH-value, oxygen and carbon dioxide levels as well as the glucose concentration. All of these parameters influence the growth ability of the cell culture and should be monitored online. The online monitoring of glucose was achieved with a novel GOD based sensor which enabled a real-time measurement of glucose during cell culture. A first-time characterisation of the sensor was carried out in the culture medium DMEM. In addition, material properties of the culture system were investigated. At first to establish a baseline measurement, the sensor was placed in different glucose concentrations dissolved in Water-KCl mixture at 25 °C inside a batch chamber under constant stirring. Afterwards, the temperature was increased to 37 °C to simulate a cell culture environment. In addition, the system was transferred into a flow-through reaction chamber. The highest response signal and the most stable signal was achieved at 37 °C with DMEM during flow-through measurement. Based on these measurements online glucose monitoring in cell culture was possible to determine the glucose consumption for each cell which is important for future human-on-a-chip devices to prevent diabetic metabolisms.}, language = {en} } @article{GloesBoehmeLiebscheretal.2018, author = {Gl{\"o}s, Franziska and B{\"o}hme, Andrea and Liebscher, Thilo and Zinn, Steffen and Richetta, Maria and Foitzik, Andreas}, title = {Analyte Tracking for Novel Bio-Applications}, series = {Materials Science Forum}, volume = {941}, journal = {Materials Science Forum}, publisher = {Trans Tech Publications}, issn = {0255-5476}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-18676}, pages = {2454 -- 2457}, year = {2018}, abstract = {Modern cell culture as well as sophisticated bio-applications involve complex biochemical processes, which are required to induce growth, product development or material degradation. Tracking the reaction processes inside the application presents a major challenge due to its complexity. The development of new analysis and tracking mechanisms for such application presents a solution to fully understand the process. In addition, the applied sensors are required to monitor the reactions enable a live tracking of the process. Furthermore, this gives the opportunity to influence and manipulate reactions to further enhance the application of the process. Possible analytes for tracking during processes can be chemical origin such as glucose, cytokines, antibiotics and growth factors, which are included in the culture medium. Based on the complexity of the culture or bio-application the sensor tracking mechanism has to be adapted to ensure full process control. A variety of different approaches can be used for the tracking mechanism.}, language = {en} } @unpublished{GattoKubitzkySchrieveretal.2019, author = {Gatto, Emanuela and Kubitzky, Sascha and Schriever, Marc and Cesaroni, Simona and Mazzuca, Claudia and Marafon, Giulia and Venanzi, Mariano and De Zotti, Marta}, title = {Building Supramolecular DNA-Inspired Nanowires on Gold Surfaces: From 2D to 3D}, series = {Angewandte Chemie International Edition}, journal = {Angewandte Chemie International Edition}, publisher = {Wiley}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-16113}, year = {2019}, abstract = {Three building blocks have been designed to chemically link to a gold surface and vertically self-assemble through thymine-adenine hydrogen bonds. Starting from these building blocks, two different films were engineered on gold surface. Film 1 consists of adenine linked to lipoic acid (Lipo-A) to covalently bind to the gold surface, and ZnTPP linked to a thymine (T-ZnTPP). Film 2 has an additional noncovalently linked layer: a helical undecapeptide analogue of the trichogin GA IV peptide, in which four glycines were replaced by four lysines to favor a helical conformation and reduce flexibility and the two extremities were functionalized with thymine and adenine to enable Lipo-A and T-ZnTPP binding, respectively. These films were characterized by electrochemical and spectroscopic techniques, and were very stable over time and when in contact with solution. Under illumination, they could generate current with higher efficiency than similar previously described systems.}, language = {en} }