@inproceedings{BauerHeinrichFursenkoetal.2017, author = {Bauer, Joachim and Heinrich, Friedhelm and Fursenko, Oksana and Marschmeyer, Steffen and Bluemich, Adrian and Pulwer, Silvio and Steglich, Patrick and Villringer, Claus and Mai, Andreas and Schrader, Sigurd}, title = {Very high aspect ratio through silicon via reflectometry}, series = {Proceedings of SPIE}, booktitle = {Proceedings of SPIE}, issn = {1996-756X}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13758}, year = {2017}, abstract = {Through Silicon Via (TSV) technology is a key feature of new 3D integration of circuits by creation of interconnections using vias, which go through the silicon wafer. Typically, the highly-selective Bosch Si etch process, characterized by a high etch rate and high aspect ratio and forming of scallops on the sidewalls is used. As presented in this paper, we have developed an experimental setup and a respective evaluation algorithm for the control and monitoring of very high aspect ratio TSV profiles by spectroscopic reflectometry. For this purpose square via arrays with lateral dimension from 3 to 10 μm were fabricated by a Bosch etch process and analyzed by our setup. By exploiting interference and diffraction effects of waves reflected from the top and bottom surfaces as well as from the side walls of the TSV patterns, the measurements provided etch depths, CD values and scallop periods. The results were compared with data obtained by a commercial wafer metrology tool. Aspect ratios of up to 35:1 were safely evaluable by our setup.}, language = {en} } @article{BauerFursenkoMarschmeyeretal.2019, author = {Bauer, Joachim and Fursenko, Oksana and Marschmeyer, Steffen and Heinrich, Friedhelm and Villasmunta, Francesco and Villringer, Claus and Zesch, Christoph and Schrader, Sigurd}, title = {Spectroscopic reflectometry for characterization of Through Silicon Via profile of Bosch etching process}, series = {Journal of Vacuum Science \& Technology B}, volume = {37}, journal = {Journal of Vacuum Science \& Technology B}, number = {6}, publisher = {American Vacuum Society (AVS)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-16093}, year = {2019}, abstract = {Through Silicon Via (TSV) technology is a key in 3D integration of circuits by the creation of interconnects using vias, which go through the full silicon wafer. Typically, a highly-selective Bosch Si etch process is used. It is characterized by a high etch rate at a high aspect ratio, whereby scallops on the sidewalls are generated. In this work, square via arrays with dimensions from 3 to 50 μm and up to 300 μm depth were fabricated and analyzed by spectroscopic reflectometry. The reflectometric data are compared to simulations by a novel theoretical approach. In order to simulate the reflectance spectra of TSV arrays, a combination of 2D and 3D rigorous coupled wave analysis was applied. Besides the via depth, the sidewall angle and the corner radius of the bottom profile were considered in the model. The general requirements on spectral resolution in TSV metrology are discussed.}, language = {en} } @article{DrostMarschmeyerFraschkeetal.2022, author = {Drost, Martin and Marschmeyer, Steffen and Fraschke, Mirko and Fursenko, Oksana and B{\"a}rwolf, Florian and Costina, Ioan and Kalishettyhalli Mahadevaiah, Mamathamba and Lisker, Marco}, title = {Etch mechanism of an Al₂O₃ hard mask in the Bosch process}, series = {Micro and Nano Engineering}, volume = {14}, journal = {Micro and Nano Engineering}, publisher = {Elsevier}, issn = {2590-0072}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-15678}, year = {2022}, abstract = {The etching of high aspect ratio structures in silicon via the Bosch process is essential in modern technologies such as microelectromechanical systems (MEMS) and through‑silicon vias (TSV) fabrication. The process can be very demanding on the mask selectivity due to long etching times, and it has been shown that an Al2O3 hard mask is very suitable in this regard, as it offers significantly higher selectivity compared to the conventional SiO2 or resist masks. In this work, we employ a combination of Scanning Electron Microscopy (SEM), Spectroscopic Ellipsometry (SE) and X-Ray Photoelectron Spectroscopy (XPS) depth profiling to scrutinize the Al2O3 mask etching mechanism and therefore the origin of the extraordinary high selectivity. We demonstrate that by increasing the passivation step time, a thicker fluorocarbon polymer layer is formed on the Al2O3, and Al2O3 is then removed with a minuscule average etch rate of 0.01 nm/min. XPS depth profiling reveals that during Deep Reactive Ion Etching (DRIE) using the Bosch process, an AlFx layer is formed between the polymer and Al2O3. As AlFx is non-volatile, it requires sputtering to be removed. If the polymer layer is thick enough to attenuate the incoming ions such that their energy is not sufficient to lead to desorption of AlFx, such as when using a longer passivation time, the mask is not eroded. By investigating the surface after different amounts of DRIE cycles, we also obtained information about the formation rate of AlFx and the changes in the Al2O3 and polymer thicknesses over the course of a DRIE process. These findings further expand the knowledge of DRIE and can help process engineers to tailor the processes accordingly.}, language = {en} } @article{FursenkoLukosiusBaueretal.2019, author = {Fursenko, Oksana and Lukosius, Mindaugas and Bauer, Joachim and Villringer, Claus and Lux, Helge and B{\"a}rwolf, Florian and Lisker, Marco and Mai, Andreas}, title = {Diagnostic of graphene on Ge(100)/Si(100) in a 200 mm wafer Si technology environment by spectroscopic ellipsometry/reflectometry}, series = {Journal of Vacuum Science \& Technology B}, volume = {37}, journal = {Journal of Vacuum Science \& Technology B}, number = {6}, publisher = {American Vacuum Society (AVS)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-16083}, year = {2019}, abstract = {Comprehensive diagnostics is a prerequisite for the application of graphene in semiconductor technologies. Here, the authors present long-term investigations of graphene on 200-mm Ge(100)/Si(100) wafers under clean room environmental conditions. Diagnostic of graphene was performed by a fast and nondestructive metrology method based on the combination of spectroscopic ellipsometry and reflectometry (SE/R), realized within a wafer optical metrology tool. A robust procedure for unambiguous thickness monitoring of a multilayer film stack, including graphene, interface layer GeOx underneath graphene, and surface roughness is developed and applied for process control. The authors found a relationship between the quality of graphene and the growth of GeOx beneath graphene. Enhanced oxidation of Ge beneath graphene was registered as a long-term process. SE/R measurements were validated and complemented using atomic force microscopy, scanning electron microscopy, Raman spectroscopy, and secondary ion mass spectrometry. This comparative study shows a high potential for optical metrology of graphene deposited on Ge/Si structures, due to its great sensitivity, repeatability, and flexibility, realized in a nondestructive way.}, language = {en} } @inproceedings{FursenkoBauerMarschmeyer2016, author = {Fursenko, Oksana and Bauer, Joachim and Marschmeyer, Steffen}, title = {3D through silicon via profile metrology based on spectroscopic reflectometry for SOI applications}, publisher = {Society of Photo-Optical Instrumentation Engineers (SPIE)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-15272}, pages = {268 -- 273}, year = {2016}, abstract = {Through-silicon via (TSV) technology is a key feature for 3D circuit integration. TSVs are formed by etching a vertical via and filling them with a conductive material for creation of interconnections which go through the silicon or silicon-on-insulator (SOI) wafer. The Bosch etch process on Deep Reactive Ion Etching (DRIE) is commonly used for this purpose. The etch profile defined by the critical dimensions (CDs) at the top and at the bottom, by the depth and by the scallop size on the sidewall needs to be monitored and well controlled. In this work a nondestructive 3D metrology of deeply-etched structures with an aspect ratio of more than 10 and patterns with lateral dimensions from 2 to 7 μm in SOI wafer is proposed. Spectroscopic reflectometry in the spectral range of 250-800 nm using a production metrology tool was applied. The depth determinations based on different algorithms are compared. The Pearson correlation coefficient between measured and calculated reflection is suggested as the most appropriate method. A simple method for top CD evaluation is proposed by the measurement of reflection and using the polynomial approximation of reflection versus TSV filling coefficient which is determined as ratio of CD to pitch. The 3D RCWA simulations confirm this dependence.}, language = {en} } @inproceedings{FursenkoLukosiusLupinaetal.2017, author = {Fursenko, Oksana and Lukosius, Mindaugas and Lupina, G. and Bauer, Joachim and Villringer, Claus and Mai, Andreas}, title = {Development of graphene process control by industrial optical spectroscopy setup}, publisher = {SPIE}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-15319}, pages = {250 -- 259}, year = {2017}, abstract = {The successful integration of graphene into microelectronic devices depends strongly on the availability of fast and nondestructive characterization methods of graphene grown by CVD on large diameter production wafers [1-3] which are in the interest of the semiconductor industry. Here, a high-throughput optical metrology method for measuring the thickness and uniformity of large-area graphene sheets is demonstrated. The method is based on the combination of spectroscopic ellipsometry and normal incidence reflectometry in UV-Vis wavelength range (200-800 nm) with small light spots (~ 30 μm2) realized in wafer optical metrology tool. In the first step graphene layers were transferred on a SiO2/Si substrate in order to determine the optical constants of graphene by the combination of multi-angle ellipsometry and reflectometry. Then these data were used for the development of a process control recipe of CVD graphene on 200 mm Ge(100)/Si(100) wafers. The graphene layer quality was additionally monitored by Raman spectroscopy. Atomic force microscopy measurements were performed for micro topography evaluation. In consequence, a robust recipe for unambiguous thickness monitoring of all components of a multilayer film stack, including graphene, surface residuals or interface layer underneath graphene and surface roughness is developed. Optical monitoring of graphene thickness uniformity over a wafer has shown an excellent long term stability (s=0.004 nm) regardless of the growth of interfacial GeO2 and surface roughness. The sensitivity of the optical identification of graphene during microelectronic processing was evaluated. This optical metrology technique with combined data collection exhibit a fast and highly precise method allowing one an unambiguous detection of graphene after transferring as well as after the CVD deposition process on a Ge(100)/Si(100) wafer. This approach is well suited for industrial applications due to its repeatability and flexibility.}, language = {en} } @article{BauerFursenkoHeinrichetal.2022, author = {Bauer, Joachim and Fursenko, Oksana and Heinrich, Friedhelm and Gutke, Marko and Kornejew, Eckhart and Br{\"o}del, Oliver and Dietzel, Birgit and Kaltenbach, Alexander and Burkhardt, Martin and Edling, Matthias and Steglich, Patrick and Herzog, Michael and Schrader, Sigurd}, title = {Determination of optical constants and scattering properties of transparent polymers for use in optoelectronics}, series = {Optical Materials Express}, volume = {12}, journal = {Optical Materials Express}, number = {1}, publisher = {Optica Publishing Group}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-15666}, pages = {204 -- 224}, year = {2022}, abstract = {Knowledge of optical constants, i.e. refractive index n and extinction coefficient k, and light scattering properties of optical polymers are required to optimize micro-optics for light-emitting diodes in terms of efficiency, color properties and light distribution. We present here a model-based diagnostic approach to determine the optical properties of polymers, which should be particularly useful in the development of plastics for optical applications. Optical constants and scattering coefficients were obtained from transmission and reflection measurements in a wavelength range from UV to NIR taking into account scattering effects due to rough surfaces and volume inhomogeneity. Based on the models for the dielectric function, the molecular optical transition energies Eg, critical point energies, Urbach energies and exciton transition energies were determined. Rayleigh and Mie scattering model and van de Hulst\&\#x0027;s anomalous diffraction theory were applied to characterize scattering due to volume inhomogeneities. Scalar diffraction theory was applied to account for surface roughness scattering. Atomic force microscopy with nanomechanical characterization was used to characterize domains in size and shape and to assign optical scattering to a suitable morphological model. The combined optical and mechanical characterization help to improve the qualification of new polymer materials for optical applications.}, language = {en} }