@article{SteglichVillringerDietzeletal.2019, author = {Steglich, Patrick and Villringer, Claus and Dietzel, Birgit and Mai, Christian and Schrader, Sigurd and Casalboni, Mauro and Mai, Andreas}, title = {On-Chip Dispersion Measurement of the Quadratic Electro-Optic Effect in Nonlinear Optical Polymers Using a Photonic Integrated Circuit Technology}, series = {IEEE Photonics Journal}, volume = {11}, journal = {IEEE Photonics Journal}, number = {3}, issn = {1943-0655}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-12307}, year = {2019}, abstract = {A novel method to determine the dispersion of the quadratic electro-optic effect in nonlinear optical materials by using a silicon-on-insulator microring resonator is presented. The microring consists of a silicon slot waveguide enabling large dc electric field strength at low applied voltages. The dispersion of third-order hyperpolarizability of a linear conjugated dye is approximated by using a two-level model for the off-resonant spectral region. As an example, the dispersion of the resonance wavelength of the resonator filled with a dye doped polymer was measured in dependence of the applied dc voltage. The polymer was poly (methylmethacrylate) doped with 5 wt\% disperse red 1 (DR1), and the measurements have been carried out at the telecommunication wavelength band around 1550 nm (optical C-band). The described measurements represent a new technique to determine the dispersion of the third-order susceptibility and molecular hyperpolarizability of the material filled into the slot of the ring-resonator.}, language = {en} } @article{SteglichHuelsemannDietzeletal.2019, author = {Steglich, Patrick and H{\"u}lsemann, Marcel and Dietzel, Birgit and Mai, Andreas}, title = {Optical Biosensors Based on Silicon-On-Insulator Ring Resonators: A Review}, series = {Molecules}, volume = {24}, journal = {Molecules}, number = {3}, issn = {1420-3049}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-10822}, year = {2019}, abstract = {Recent developments in optical biosensors based on integrated photonic devices are reviewed with a special emphasis on silicon-on-insulator ring resonators. The review is mainly devoted to the following aspects: (1) Principles of sensing mechanism, (2) sensor design, (3) biofunctionalization procedures for specific molecule detection and (4) system integration and measurement set-ups. The inherent challenges of implementing photonics-based biosensors to meet specific requirements of applications in medicine, food analysis, and environmental monitoring are discussed.}, language = {en} } @article{BauerFursenkoHeinrichetal.2022, author = {Bauer, Joachim and Fursenko, Oksana and Heinrich, Friedhelm and Gutke, Marko and Kornejew, Eckhart and Br{\"o}del, Oliver and Dietzel, Birgit and Kaltenbach, Alexander and Burkhardt, Martin and Edling, Matthias and Steglich, Patrick and Herzog, Michael and Schrader, Sigurd}, title = {Determination of optical constants and scattering properties of transparent polymers for use in optoelectronics}, series = {Optical Materials Express}, volume = {12}, journal = {Optical Materials Express}, number = {1}, publisher = {Optica Publishing Group}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-15666}, pages = {204 -- 224}, year = {2022}, abstract = {Knowledge of optical constants, i.e. refractive index n and extinction coefficient k, and light scattering properties of optical polymers are required to optimize micro-optics for light-emitting diodes in terms of efficiency, color properties and light distribution. We present here a model-based diagnostic approach to determine the optical properties of polymers, which should be particularly useful in the development of plastics for optical applications. Optical constants and scattering coefficients were obtained from transmission and reflection measurements in a wavelength range from UV to NIR taking into account scattering effects due to rough surfaces and volume inhomogeneity. Based on the models for the dielectric function, the molecular optical transition energies Eg, critical point energies, Urbach energies and exciton transition energies were determined. Rayleigh and Mie scattering model and van de Hulst\&\#x0027;s anomalous diffraction theory were applied to characterize scattering due to volume inhomogeneities. Scalar diffraction theory was applied to account for surface roughness scattering. Atomic force microscopy with nanomechanical characterization was used to characterize domains in size and shape and to assign optical scattering to a suitable morphological model. The combined optical and mechanical characterization help to improve the qualification of new polymer materials for optical applications.}, language = {en} } @article{SteglichMaiVillringeretal.2021, author = {Steglich, Patrick and Mai, Christian and Villringer, Claus and Dietzel, Birgit and Bondarenko, Siegfried and Ksianzou, Viachaslau and Villasmunta, Francesco and Zesch, Christoph and Pulwer, Silvio and Burger, Martin and Bauer, Joachim and Heinrich, Friedhelm and Schrader, Sigurd and Vitale, Francesco and De Matteis, Fabio and Prosposito, Paolo and Casalboni, Mauro and Mai, Andreas}, title = {Silicon-organic hybrid photonics: an overview of recent advances, electro-optical effects and CMOS integration concepts}, series = {Journal of Physics: Photonics}, volume = {3}, journal = {Journal of Physics: Photonics}, number = {2}, issn = {2515-7647}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13882}, year = {2021}, abstract = {In recent decades, much research effort has been invested in the development of photonic integrated circuits, and silicon-on-insulator technology has been established as a reliable platform for highly scalable silicon-based electro-optical modulators. However, the performance of such devices is restricted by the inherent material properties of silicon. An approach to overcoming these deficiencies is to integrate organic materials with exceptionally high optical nonlinearities into a silicon-on-insulator photonic platform. Silicon-organic hybrid photonics has been shown to overcome the drawbacks of silicon-based modulators in terms of operating speed, bandwidth, and energy consumption. This work reviews recent advances in silicon-organic hybrid photonics and covers the latest improvements to single components and device concepts. Special emphasis is given to the in-device performance of novel electro-optical polymers and the use of different electro-optical effects, such as the linear and quadratic electro-optical effect, as well as the electric-field-induced linear electro-optical effect. Finally, the inherent challenges of implementing non-linear optical polymers on a silicon photonic platform are discussed and a perspective for future directions is given.}, language = {en} } @misc{SteglichVillringerPulweretal.2017, author = {Steglich, Patrick and Villringer, Claus and Pulwer, Silvio and Dietzel, Birgit and Ksianzou, Viachaslau and Schrader, Sigurd}, title = {Chip-integrierte photonische Bauelemente}, series = {Wissenschaftliche Beitr{\"a}ge 2017}, volume = {21}, journal = {Wissenschaftliche Beitr{\"a}ge 2017}, issn = {0949-8214}, doi = {10.15771/0949-8214_2017_7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-9426}, pages = {55 -- 59}, year = {2017}, abstract = {In unserer hochtechnologisierten Gesellschaft spielt die optische Daten{\"u}bertragung aufgrund der stetig wachsenden Informationsvielfalt eine immer bedeutendere Rolle. In den Anf{\"a}ngen der Nachrichtentechnik waren Datenraten von wenigen bit/s realisierbar. Heute werden mittels optischer Technologien {\"U}bertragungsraten von mehreren Gbit/s umgesetzt. M{\"o}glich wird dies durch neue Entwicklungen in der Chip-integrierten Photonik. Beispiele daf{\"u}r sind Chip-integrierte elektrooptische Modulatoren und Schalter. In diesem Artikel werden neue Entwicklungen in der Chip-integrierten Photonik diskutiert und die experimentelle Charakterisierung der Bauelemente in Form eines Ringresonators beschrieben. F{\"u}r die Experimente wird exemplarisch ein photonisches Bauelement genutzt, das aus einem hybriden Silizium-Polymer-Materialsystem besteht. Die Ergebnisse zeigen, dass diese Materialkombination vielversprechend f{\"u}r zuk{\"u}nftige Chip-integrierte photonische Bauelemente mit extrem geringem Energiebedarf ist.}, language = {de} }