620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Refine
Document Type
Has Fulltext
- no (3)
Is part of the Bibliography
- no (3)
Keywords
- Bernsteinsäure (1)
- Cement (1)
- Coating (1)
- Compounding (1)
- Durability (1)
- Extrusion (1)
- Granulate (1)
- PEGDMA (1)
- Plastic feeding (1)
- Reactive Extrusion (1)
Institute
- Zentrum für Forschung, Entwicklung und Transfer (3) (remove)
One major problem of a continuous process like plastic extrusion is their incapability to deal with non-local gas pressure. This is an inherent problem because a continuous process has an open end in the feeding port where pressure can escape. In this study a novel feeding system was developed to enable granulate feeding into gas pressurized processes inside a single- or twin-screw extruder. With this apparatus gas pressure can be applied inside the extrusion process. The apparatus separates the pressurized extruder from the dosing equipment that feeds the extruder. It keeps the pressure inside the system while continuously feeding new material into the process. A small-scale prototype was designed for proof-of concept. The small size of the prototype was able to handle small amounts of granulates of around 100 - 200 g/h. An applied gas pressure of 8 bar was achieved. In future optimizations, throughput can be increased and maximum applied gas pressure towards 15-20 bar.
The use of wood in geotechnical applications has seen renewed interest. However, concerns related to the durability and service life of wood in ground contact applications remain. Wood has the potential to substitute commonly used steel and concrete in the geotechnical engineering sector, but solutions to extending the service life and maintenance intervals require long-lasting wood protection systems capable of inhibiting fungal and bacterial decay. Cement, one of the constituents of concrete was identified as a potential coating material for wood used in soil stabilisation works. Spruce and beech wood rest rolls from commercial veneer peeling has been identified as a potential source for cement-coated geotechnical wood products. Norway spruce and European beech wood was subsequently used in this study.
In this study, a series of tests related to dimensional stability and fungal durability were undertaken to investigate the adhesion of a cement coating to wood and to assess the effect of a cement coating on the resistance to fungal decay. Swelling and shrinkage tests of uncoated specimens were undertaken to investigate dimensional stability. Laboratory fungal durability tests assessed changes in wood durability of specimens coated with a novel, flexural cement coating. Wood impregnated with Polyethyleneglycol-dimethacrylate (PEGDMA) prior to cement coating was investigated to improve wood dimensional stability and reduce cracking of the cement coating under changing wood moisture conditions. Cement coating thickness and delamination tests then assessed the durability of the novel cement coating itself. Results from fungal durability tests showed that a continuous, flexural, and crack-free cement coating was imperative to a wood durability improvement. Double cement-coated spruce wood showed improved resistance to decay by basidiomycetes (Coniphora puteana and Trametes versicolor). Results from swelling and shrinkage tests showed that an improvement in dimensional stability would assist in achieving a durable cement coating and impregnation with Polyethyleneglycol-dimethacrylate (PEGDMA) is one manner to improve dimensional stability and therefore cement adhesion to the wood substrate.