Refine
Document Type
Language
- English (3)
Has Fulltext
- no (3)
Is part of the Bibliography
- no (3)
Keywords
- Timber joist floor (3) (remove)
Institute
In wood framed buildings, floors are formed by fastening wood sheathing to joists spaced at a regular interval. The sheathing is typically fastened to the joist using screws so the resulting system is a complicated periodic point-connected plate-rib structure. It is shown that the point force mobility varies significantly with position. A machine installation generally is close to discontinuities, such as at: floor edges, joist-screw locations, joints between the sheathing plates, and due to workmanship. In such cases, moment excitation might become important at some frequencies and the neglect of moments a priori can ead to inaccurate prediction of the total emission. This paper presents measured point moment mobilities with respect to the distance to discontinuities for a timber joist floor where a single layer of chipboard forms the sheathing. It is shownthat the measured point moment mobility indicates an infinite plate behaviour. This includes for positions above a joist but between screw positions. To determine the relative contribution of moments and perpendicular forces to the total structure-borne sound power, case studies of two sources, a fan unit and a whirlpool bath, are described, for various locations on a timber joist floor.
To estimate the structure-borne sound power of vibrational active machines or components two source quantities, corresponding to the source activity and mobility, and one receiver quantity, the mobility, are usually required. A practical, laboratory-based measurement procedure for the characterisation of mechanical installations has recently been proposed, which yields single equivalent values of source strength and source mobility. In order to predict the power in the installed condition, an estimate of the receiver mobility also is required, again, for practical reasons, in the form of a single equivalent value. This paper considers the single equivalent receiver mobilities for lightweight building structures - timber joist floors. The value obtained is in the form of the average magnitude of the effective mobilities over the contact points. A simple prediction method is proposed for point- and transfer mobilities (both are required to yield the effective mobility at each contact) based on infinite beam and infinite plate behaviour. Estimates for point-, transfer- and single equivalent receiver mobilities are discussed and compared with measured data.