Refine
Year of publication
- 2015 (11) (remove)
Document Type
- Conference Proceeding (11) (remove)
Has Fulltext
- no (11)
Is part of the Bibliography
- no (11)
Keywords
- Holzbau (7)
- Schallmesstechnik (7)
- Architektur (1)
- Double-leaf timber-frame wall (1)
- EN 12354 (1)
- Energieeffizienz (1)
- Gebäudehüllen (1)
- Massivholzelemente (1)
- Multi-Storey Buildings (1)
- SEA Berechnung (1)
Institute
- Fakultät für Angewandte Natur- und Geisteswissenschaften (11) (remove)
With the increasing mechanization of buildings, it is necessary to be able to predict both the structure-borne sound power input from building machinery and the subsequent propagation of structure-borne sound in the building. This paper considers lightweight constructions and describes the results of an experimental study in the laboratory on a T-junction that was constructed from a timber joist floor and two double leaf timber-frame walls. The focus in this paper is on the vibrational behaviour of one of the timber-frame walls. To assess the vibration pattern and the propagation of structure-borne sound, the surface velocity levels were measured on a grid on both leaves of the wall with point force excitation on one side. This grid allowed calculation of structural intensity vectors. The influence of elements such as the timber studs and tongue and grooved joints between the boards were apparent in different frequency regions. Experimental modal analysis was carried out using measurements on both leaves of the wall, giving information about the coupling in different frequency regions. The results give insight into how such a timber-frame wall could be modelled using statistical energy analysis.
Verglichen mit Gebäuden in Mauerwerks- und Betonbauweise ist jedoch die Planung eines Bauobjektes in Holzbauweise für den Architekten und die Fachplaner eine deutlich größere Herausforderung.
Geeignete computergestützte Planungswerkzeuge, die eine Simulation der genannten bauphysikalischen und konstruktiven Eigenschaften bereits im frühen Planungsentwurf für das gesamte Bauwerk und nicht nur für einzelne Komponenten ermög-lichen, könnten den Planungsaufwand drastisch reduzieren.
Zur Prognose der Luft- und Trittschalldämmung nach EN 12354 wurde deshalb in einem aktuellen Gemeinschafts-Forschungsvorhabens zwischen der TU München, der Hochschule Rosenheim und dem ift Rosenheim eine SEA basierte Excel Anwendung erstellt, die die Besonderheiten des Holzmassivbaus berücksichtigt.
Die geometrischen Daten des Bauvorhabens sowie die Bauteilbezeichnungen können für die Prognose aus einem Bauwerkinformationsmodell (BIM) eingelesen werden.
Die Bauteilkennwerte und Stoßstellendämm-Maße werden aus einer separaten Bauteildatenbank ausgelesen, die innerhalb des Projekts durch Messungen aus verschiedenen Laboren gefüllt wird. Im Beitrag werden die Anwendung und der aktuelle Stand der Datenbank vorgestellt, sowie Vergleiche zwischen Messergebnissen am realen Objekt und der Prognoserechnung gezeigt.
SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings
(2015)
In order to enable the design of a multi-storey timbe
r building with respect to the requirements or
recommendations for an enhanced acoustic comfort, a c
ollaboration of various experts is required
during the design process creating their own indivi
dual building models.
A simplification of the
design process and the procedure of verification co
uld be achieved if all of the experts involved
work on one single CAD based Building Information Mo
del (BIM). The required design tools
(FEM and SEA for the acoustic computation) can be di
rectly coupled to the BIM.
For this
purpose, it is necessary to allocate much more valid
ated input data for timber building elements.
Measured transmission functions from structure-borne sound sources in a timber-frame construction
(2015)
The aim of prEN 15657-2 is to provide engineering methods to estimate the structure-borne sound power input from machinery in situations where the source mobility matches or is lower than the receiver mobility. This situation often affects lightweight constructions such as timber-frame buildings. To estimate the sound pressure level in a room that is adjacent or distant from the room containing the source, the installed structure-borne sound power has to be propagated across at least one junction in the timber-frame construction. However, at present there are no generic, validated calculation models due to the complexity and the large variety of timber-frame constructions. A simplified approach to investigate and compare the structure-borne sound transmission is to treat the framed construction as a black box and only consider one parameter, a transmission function which is the ratio of the sound pressure level in the receiving room to the injected structure-borne sound power level. To get information about the variation of this transmission function in different timber-frame constructions, measurements were made in both the laboratory and the field. Experimental results are presented showing the variation due to different building configurations and the effect of the excitation position on the transmission function.
In den vergangenen Jahren hat der Holzbau auch im mehrgeschossigen Wohnungsbau an Bedeutung gewonnen. Zur Gewährleistung des Schallschutzes zwischen fremden Wohneinheiten sind Werkzeuge zur Berechnung der Schallübertragung in leichten Baustrukturen, wie zum Beispiel Holzrahmenbaukonstruktionen nötig. Solche Prognosemodelle müssen für Ingenieuranwendungen robust sein und auf abstrahierten, einfachen Rechenmodellen beruhen. Um die komplexen bertragungsmechanismen in solchen Rechenmodellen abbilden zu können, ist jedoch zunächst eine detaillierte Kenntnis des Schwingungs- und Körperschallverhaltens dieser Konstruktionen nötig. In diesem Beitrag werden Ergebnisse von Untersuchungen an einer konkreten Rahmenbaukonstruktion vorgestellt. Hierzu wurde im Labor für Schallmesstechnik an der Hochschule Rosenheim ein Leichtbauprüfstand errichtet. Grundlage für ein Prognosemodell könnten Berechnungsmethoden wie die Statistische Energieanalyse (SEA) darstellen. Um deren Anwendbarkeit zu prüfen, wurde die Verteilung der Körperschallenergie in einer Holzrahmenbauwand bei Anregung durch eine Punktquelle untersucht. Dabei wurde die Abnahme der Oberflächenschnelle mit steigendem Abstand zum Anregungspunkt sowie der Energiefluss in der Struktur mithilfe von Körperschallintensitäts-Messverfahren analysiert.