Refine
Year of publication
Document Type
- Conference Proceeding (53)
- Contribution to a Periodical (23)
- Report (8)
- Article (peer reviewed) (1)
Has Fulltext
- no (85)
Is part of the Bibliography
- no (85)
Keywords
- Schallmesstechnik (85) (remove)
Institute
Within the scope of the recently finished cooperate research project "VibWood" at Technical University of Munich and Rosenheim University of Applied Sciences, fully parametrized numerical models for lightweight wooden floor constructions have been developed and calibrated by experimental modal analyses.
Based on a vast parametric study including floating floors and suspended ceilings a database of narrowband sound power levels in the frequency range up to 125 Hz for a wide range of floor dimensions has been set up.
A procedure will be presented on how to process the numerical data and derive single number values that allow a comparison to the standardized rating of impact sound insulation according to DIN EN ISO 717-2.
The derived data is implemented into a graphical user interface (GUI). This GUI is available for free. The database is open for additional geometries and will be enhanced by different constructions in the near future.
An approximate approach is described, for obtaining the source quantities required for the calculation of structure-borne sound power from machines into supporting lightweight building elements. The approach is in two stages, which are based on existing international Standards for measurement. The first stage involves direct measurement of the source free velocity at each contact, to give the sum of the square velocities. The second stage is based on the reception plate method and yields the single equivalent blocked force, which approximates the sum of the square blocked forces. The applicability of the source data obtained has been investigated in a case study of a fan unit on a timber joist floor. The approach contains several significant simplifying assumptions and the uncertainties associated with them are considered. For the case considered, the power transmitted into the floor is estimated by the approximate method to within 5 dB of the true value, on average.
In der Bauakustik werden bei der Berechnung der schalltechnischen Eigenschaften von Bauteilen ausreichend diffuse Körperschallfelder angenommen. In der Holzmassivbauweise mit modernen Holzwerkstoffen, wie Brettsperrholz, ist die innere Dämpfung der Bauteile im Vergleich zum Mauerwerks- und Betonbau höher, somit die Ausbildung eines Körperschall-Diffusfeldes nicht gesichert. Zum Verständnis der Ausbildung des Körperschallfeldes ist die Messung der Ausbreitungsdämpfung hilfreich. Diese erfolgt über eine Messung des Schnellepegels als Funktion des Abstandes zum Anregungspunkt. Für einen Vergleich mit theoretischen Modellen muss ebenso der Gesamtverlustfaktor bestimmt werden. In diesem Beitrag werden Messergebnisse der Körperschallfelder in unterschiedlichen plattenförmigen Bauteilen und der Vergleich zu theoretischen Ansätzen präsentiert. Zunächst werden homogene Strukturen am Beispiel von Metall- und Gipskartonplatten GKB betrachtet. Diese Messungen erfolgten an frei hängenden Elementen in unterschiedlichen Dimensionen bei punktförmiger Anregung. Im Anschluss wird ein Brettsperrholz-Bauteil BSH als orthotropes Material bei Punkt- sowie bei Linienanregung betrachtet.