Refine
Year of publication
Document Type
- Conference Proceeding (53)
- Contribution to a Periodical (23)
- Report (8)
- Article (peer reviewed) (1)
Has Fulltext
- no (85)
Is part of the Bibliography
- no (85)
Keywords
- Schallmesstechnik (85) (remove)
Institute
- Fakultät für Angewandte Natur- und Geisteswissenschaften (85) (remove)
In this contribution a method for the prediction of the radiated sound out of the velocity field of a vibrating ceiling is presented. The numerical method was validated via measurements on a real structure using a pp-probe. It is based on Integral Transform techniques and can be applied in the postprocessing of a FEM simulation
(harmonic analysis) [1]. The method was verified by measurements on the real structure and can be used for parametrical studies.
Rounding off the Parts 1 and 2 of this publication nomograms, based on dimensionless parameters, can be developed to predict the sound radiation of light weight slabs. Hereby different sets of geometry as well as different configurations of ceilings can be studied in order to describe the acoustical and dynamical behaviour of wooden ceilings.
Experimentelle Bestimmung des Abstrahlgrades und des inneren Verlustfaktors orthotroper Platten
(2017)
Wooden building systems, including cross-laminated timber elements, are becoming more common. The last few years have seen new developments and documentation of innovative types of cross-laminated timber floor assemblies. Regarding impact sound associated to walking persons, running or jumping children, such floor assemblies can be regarded as a weak part. So far, there are no reliable standardized calculation models available, for prediction of impact sound in the entire frequency range. Therefore the design is always based upon previous experiences and available measurements. This article presents the results of a number of well controlled sound insulation measurements of cross-laminated timber/massive wood floor constructions conducted in laboratories. The collection of data and results analysis highlight some basic phenomena. For instance, how structural differences related to the grouping of the constructions change the frequency distribution of the impact sound level and the single number quantities. Another significant result is the influence of the dynamic stiffness of the resilient interlayer of floating floor systems and the mass per unit area of the floors. Based on this analysis, the aim is to identify similarities and carry out simplifications. The data will be further processed and used in the development of prediction models and optimization process of cross-laminated timber floor assemblies.
This paper investigates the prediction of low-frequency impact sound insulation for a solid timber floor formed from dowel-connected joists with Swiss hardwood.
A finite element model was developed for the dynamic response of the floor as it is neither homogeneous nor isotropic and has complex connections.
With point force excitation, a FEM model for the dynamic response of the floor was validated using experimental modal analysis in the laboratory.
Two different FEM models were developed, one using spring connectors and the other using join connectors. Good agreement between FEM and measurements in terms of the Modal Assurance Criterion (MAC) and eigenfrequencies was achieved for the first 14 modes with the spring connector model and for the first 7 modes with the join connector model.
However, for the vibroacoustic analysis it was necessary to use the join connector model due to the computational instabilities of the spring model above 100 Hz when it was coupled to the acoustic medium.
With mechanical excitation the radiated sound power from the underside of the timber floor was measured with sound intensity in order to calculate the radiation efficiency. Comparison of measurements and FEM showed reasonable agreement between 20Hz and 200Hz