Refine
Document Type
- Article (peer reviewed) (15) (remove)
Language
- English (15)
Has Fulltext
- no (15) (remove)
Is part of the Bibliography
- no (15) (remove)
Keywords
- Timber engineering (4)
- Laminated veneer (3)
- Light (3)
- Nutrients (3)
- Daphnia (2)
- Phytoplankton (2)
- Resource competition (2)
- Temporary soil nailing (2)
- Algae (1)
- Algal spring bloom (1)
Institute
- Forschung und Entwicklung (15) (remove)
Circular hollow sections of beech-laminated veneer lumber (LVL) for the use as temporary geotechnical soil nailing systems are currently being developed. Due to their permanent subsoil cement embedment, investigations of the bond line quality of the timber sections are essential. This paper presents the bonding properties of flat and curved beech LVL after cyclic conditioning in a water–cement grout solution aimed at inducing short- and long-term alkaline attack of the timber. In total, 409 and 69 samples were tested in tensile shear tests after short-term and long-term conditioning, respectively.
Three different adhesive systems, a one-component polyurethane adhesive, a melamine–urea–formaldehyde adhesive and a melamine–urea–formaldehyde adhesive modified by means of (polyvinyl)-acetate adhesive were investigated and compared. Short-term conditioning by submersion in boiling cement suspension was found to be a reliable method for testing the bonding performance rather than long-term conditioning. In the case of tensile shear tests of samples subjected to long-term treatment, wood material strength was the decisive criterion. Generally, tensile shear test samples of all investigated adhesives achieved reliable bonding for a pressing force up to 1.0 MPa. No relationship was recognised between the determined bonding failure and the wood properties tensile shear strength, wood failure percentage, fracture pattern and bulk density of veneers adjacent to the bond line.
For the determination of the bond line integrity of curved veneer poles, it was necessary to test bonding quality in a combined test using curved and flat samples and to compare tensile shear strength with data determined on reference samples in the same veneer population without bond line.
Innovative circular, hollow, laminated veneer lumber (LVL) beech sections for use as temporary geotechnical soil reinforcement members are currently being developed. Appropriate surface gluing quality between the veneers is fundamental to this subsoil application of the permanently cement-embedded, engineered timber product. The circular cross-section geometry and the permanently high-alkaline environment of the structural member is not covered by presently standardized testing and conditioning methods for examining LVL surface bond line quality. The sample conditioning and tensile shear test method compliant with EN 302-1 (Adhesives for load-bearing timber structures—test methods—part 1: determination of longitudinal tensile shear strength, European Committee for Standardization, Brussels, 2013) was modified to determine bonding parameters for circular, hollow LVL sections. Bond line curvature, groove cutting depth and sample geometry were found to greatly influence stress distribution, percentage of wood failure and tensile shear strength.
Short-term alkaline treatment of test samples did not significantly influence the bonding performance, wood failure percentage, tensile shear strength and fracture patterns. To improve tensile shear strength, adhesives with different material rigidities were used and compared. An orthotropic, elastic numerical analysis revealed a greater influence of adherent elasticity than adhesive elasticity on the stress distribution within the bond line. With regard to determining the bond line integrity of curved veneer poles, a sample geometry compliant with EN 302-1 (2013) was developed and numerically evaluated.
The Bode catchment (Germany) shows strong land use gradients from forested parts of the National Park (23 % of total land cover) to agricultural (70 %) and urbanised areas (7 %). It is part of the Terrestrial Environmental Observatories of the German Helmholtz association. We performed a biogeochemical analysis of the entire river network. Surface water was sampled at 21 headwaters and at ten downstream sites, before (in early spring) and during the growing season (in late summer). Many parameters showed lower concentrations in headwaters than in downstream reaches, among them nutrients (ammonium, nitrate and phosphorus), dissolved copper and seston dry mass. Nitrate and phosphorus concentrations were positively related to the proportion of agricultural area within the catchment. Punctual anthropogenic loads affected some parameters such as chloride and arsenic. Chlorophyll a concentration and total phosphorus in surface waters were positively related. The concentration of dissolved organic carbon (DOC) was higher in summer than in spring, whereas the molecular size of DOC was lower in summer. The specific UV absorption at 254 nm, indicating the content of humic substances, was higher in headwaters than in downstream reaches and was positively related to the proportion of forest within the catchment. CO2 oversaturation of the water was higher downstream compared with headwaters and was higher in summer than in spring. It was correlated negatively with oxygen saturation and positively with DOC concentration but negatively with DOC quality (molecular size and humic content). A principle component analysis clearly separated the effects of site (44 %) and season (15 %), demonstrating the strong effect of land use on biogeochemical parameters.
Ecological theory predicts that the relative importance of benthic to planktonic primary production usually changes along the rivers' continuum from a predomination of benthic algae in lower stream orders to a predomination of planktonic algae at higher orders. Underlying mechanisms driving the interaction between algae in these habitats, its controlling factors and consequences for riverine ecosystems are, however, only partly understood. We present a mechanistic analysis of the governing ecological processes using a simplified, numerical model and examine how abiotic factors and biotic interactions influence benthic and planktonic algae by changing resource competition. We compare the outcome of the model with the results of a factorial mesocosm experiment mimicking the parameter spaces of the model. The results show a remarkable similarity with regard to the temporal development of benthic and pelagic algal biomass and shifting dominance patterns. In particular we analyse the effects of the pathways of nutrient supply (upwelling from the hyporheic zone, direct supply to the surface water, or via both pathways) and grazing in a gradient of river depths. Our results show that detachment of benthic algae, sinking of planktonic algae and the pathway of nutrient supply are key processes determining the respective algal biomass distributions particularly in shallow and intermediate deep systems. Increasing nutrient supply increases algal biomasses, but does not change the general pattern of the interactions. Decreasing light supply decreases the dominance of planktonic algae, but increases dissolved nutrients. At intermediate to high grazing rates algal biomass can be controlled by grazers, but however, at high grazing rates, dissolved nutrients accumulate in the surface water. Our results indicate that nutrient pathways, resource competition and internal control by grazing need to be considered explicitly for the understanding and explanation of eutrophication phenomena in riverine ecosystems. As a consequence, ecologically effective eutrophication management of running water systems has to go beyond the control of nutrient emissions or the achievement of limiting threshold values in the receiving waters, but requires the consideration of the nutrient pathways (surface water versus groundwater) and the shifting biological controls from lower to higher order stream ecosystems.
Excessive amounts of nutrients and dissolved organic matter in freshwater bodies affect aquatic ecosystems. In this study, the spatial and temporal variability in nitrate (NO3−), dissolved organic carbon (DOC) and soluble reactive phosphorus (SRP) was analyzed in the Selke (Germany) river continuum from three headwaters draining 1–3 km2 catchments to two downstream reaches representing spatially integrated signals from 184–456 km2 catchments. Three headwater catchments were selected as archetypes of the main landscape units (land use × lithology) present in the Selke catchment. Export regimes in headwater catchments were interpreted in terms of NO3−, DOC and SRP land-to-stream transfer processes. Headwater signals were subtracted from downstream signals, with the differences interpreted in terms of in-stream processes and contributions from point sources. The seasonal dynamics for NO3− were opposite those of DOC and SRP in all three headwater catchments, and spatial differences also showed NO3− contrasting with DOC and SRP. These dynamics were interpreted as the result of the interplay of hydrological and biogeochemical processes, for which riparian zones were hypothesized to play a determining role. In the two downstream reaches, NO3− was transported almost conservatively, whereas DOC was consumed and produced in the upper and lower river sections, respectively. The natural export regime of SRP in the three headwater catchments mimicked a point-source signal (high SRP during summer low flow), which may lead to overestimation of domestic contributions in the downstream reaches. Monitoring the river continuum from headwaters to downstream reaches proved effective to jointly investigate land-to-stream and in-stream transport, and transformation processes.
We independently manipulated mixing intensity (strong artificial mixing vs. background turbulence) and water‐column depth (2 m, 4 m, 8 m, and 12 m) in order to explore their separate and combined effects in a field enclosure experiment. To accentuate the vertical light gradient, enclosures had black walls, resulting in a euphotic depth of only 3.7 m. All enclosures were placed in a well‐mixed water bath to equalize temperature across treatments. Phytoplankton responded to an initial phosphorus pulse with a transient increase in biomass, which was highest in the shallowest, least light‐limited water columns where dissolved mineral phosphorus subsequently became strongly limiting. As a consequence, the depth‐averaged mineral phosphorus concentration increased and the seston carbon (C) : phosphorous (P) ratio decreased with increasing water‐column depth. Low turbulence enclosures became quickly dominated by motile taxa (flagellates) in the upper water column, whereas mixed enclosures became gradually dominated by pennate diatoms, which resulted in higher average sedimentation rates in the mixed enclosures over the 35‐d experimental period. Low turbulence enclosures showed pronounced vertical structure in water columns >4 m, where diversity was higher than in mixed enclosures, suggesting vertical niche partitioning. This interpretation is supported by a primary production assay, where phytoplankton originating from different water depths in low‐turbulence treatments had the relatively highest primary productivity when incubated at their respective depths of origin.
This paper investigates the long-term tensile properties of laminated veneer lumber (LVL) beech sections coated with cement and exposed to fungal decay. A set of LVL coupon (dog-bone) samples was stored in compost, tested in tension after 6 and 12 months and compared to reference samples stored at 20 °C and 65% relative humidity. Results showed that after 26 weeks of compost exposure, a fungus of the Ascomycota genus was identified in cement-coated samples using a molecular biology polymerase chain reaction (PCR) technique, which analyses the internal transcribed spacer (ITS) region of the ribosomal DNA. However, no visual deterioration was noticed.
Still in cement-covered samples and after 12 months of exposure, a common white rot fungus was determined by DNA chip technology, but no fungal wood decay was visible in areas where the applied coating had a thickness of at least 5 mm. Decay in uncoated LVL samples was significant with the samples having an average residual strength equal to 7%. This compares to the tensile strength of coated samples, which only decreased by 65% relative to the reference samples. Strength and stiffness of coated samples did not differ significantly between 6 and 12 months of exposure. Preliminary investigations tend to show that the strength reduction in cement-coated samples is due to an alkaline degradation of the wood. The observed influence of the coating thickness on the visual fungal decay can probably be ascribed to the protection mechanism due to a physical fungal barrier with a high pH.
1. Humic lakes with a high external supply of DOC and low input of nutrients can often support a high biomass of metazoan zooplankton. In such lakes, autotrophic algae compete with bacteria for inorganic nutrients, but bacteria support mixotrophic growth. Consequently, planktonic communities are often dominated by mixotrophic flagellates, while obligate autotrophic phytoplankton occurs in low numbers for extended periods.
2. To test the importance of autotrophic phytoplankton and mixotrophic flagellates as food resources for metazoan grazers and, in turn, the feedback effects of grazers on basal food‐web interactions, we conducted a long‐term experiment where we simulated abiotic resource relationships of humic lakes (high DOC [glucose] and low P input). We examined the population dynamics of Daphnia galeata when inoculated in systems with autotrophic algae only, mixotrophic algae only and a mixture of autotrophic and mixotrophic algae, and how the systems changed after the inoculation of Daphnia. All combinations were run at high‐ and low‐light conditions to analyse the effects of light on food quantity and quality.
3. Daphnia grew to high densities only when mixotrophs were present at high‐light conditions and showed no or only weak growth at low‐light conditions or with autotrophs as the only food source.
4. Autotrophic algae and bacteria showed a strong competition for nutrients. Autotrophic algae were released from competition for nutrients after Daphnia grazed on bacteria, which led to a probable change of the bacteria community to less edible but less competitive taxa. As a consequence, there was a mutualistic interaction between autotrophs and mixotrophs before Daphnia were introduced which turned into competition after Daphnia inoculation.
5. We suggest that mixotrophic flagellates can be a critical resource for cladocerans and thereby also have a cascading effect on higher trophic levels, and cladocerans, in turn, have important indirect effects on basal planktonic food webs; hence, both might affect whole lake ecosystems.
In riverine ecosystems primary production is principally possible in two habitats: in the benthic layer by sessile algae and in the surface water by planktonic algae being transported downstream. The relevance of these two habitats generally changes along the rivers' continuum. However, analyses of the interaction of algae in these two habitats and their controlling factors in riverine ecosystems are, so far, very rare. We use a simplified advection-diffusion model system combined with ecological process kinetics to analyse the interaction of benthic and planktonic algae and nutrients along idealised streams and rivers at regional to large scales. Because many of the underlying processes affecting algal dynamics are influenced by depth, we focus particularly on the impact of river depth on this interaction. At constant environmental conditions all state variables approach stable spatial equilibria along the river, independent of the boundary conditions at the upstream end. Because our model is very robust against changes of turbulent diffusion and stream velocity, these spatial equilibria can be analysed by a simplified ordinary differential equation (ode) version of our model. This model variant reveals that at shallower river depths, phytoplankton can exist only when it is subsidised by detaching benthic algae, and in turn, at deeper river depths, benthic algae can exist only in low biomasses which are subsidised by sinking planktonic algae. We generalise the spatial dynamics of the model system using different conditions at the upstream end of the model, which mimic various natural or anthropogenic factors (pristine source, dam, inflow of a waste water treatment plant, and dilution from e.g. a tributary) and analyse how these scenarios influence different aspects of the longitudinal spatial dynamics of the full spatial model: the relation of spatial equilibrium to spatial maximum, the distance to the spatial maximum, and the response length. Generally, our results imply that shallow systems recover within significantly shorter distances from spatially distinct disturbances when compared to deep systems, independent of the type of disturbance.
Innovative beech laminated veneer lumber (LVL) circular hollow sections for the use as temporary geotechnical soil nailing systems are currently being developed. Due to the permanent subsoil cement embedment, combined with high water saturation and permanent loading, the timber sections will lose strength and stiffness over time to a degree currently unknown. This paper presents the tensile and bending material properties of flat and curved beech LVL under various periods of immersion in a water–cement grout solution aiming at inducing both water saturation and long-term alkaline attack of the timber.
In total, 824 and 279 samples were tested in tension and bending, respectively. Results show that samples manufactured from 3 mm thick veneers result in tensile strength and stiffness 17% and 24% higher, respectively, than samples manufactured from 2 mm thick veneers. A reduction in the initial bending and tensile strength of up to 70% was found after 90 days of water saturation and cement contact. Taking into account a duration of load factor for permanent loading of two years, it is recommended to reduce the short-term tensile and bending strength of beech circular hollow sections to be used as geotechnical anchors by 80%.