Refine
Year of publication
- 2019 (106) (remove)
Document Type
- Article (peer reviewed) (31)
- Conference Proceeding (29)
- Contribution to a Periodical (19)
- Part of a Book (15)
- Doctoral Thesis (5)
- Other (3)
- Book (2)
- Report (1)
- Working Paper (1)
Is part of the Bibliography
- no (106)
Keywords
- Bauproduktenrecht (5)
- Betreuung (3)
- International Classification of Functioning (3)
- Kindergarten (3)
- Kita (3)
- Kleinstkinder (3)
- Krippe (3)
- Praxisbegleitung (3)
- Bauprodukteverordnung (2)
- Comparability (2)
Institute
- Fakultät für Angewandte Gesundheits- und Sozialwissenschaften (27)
- Fakultät für Ingenieurwissenschaften (17)
- Fakultät für Holztechnik und Bau (12)
- Fakultät für Angewandte Natur- und Geisteswissenschaften (10)
- Fakultät für Betriebswirtschaft (7)
- Forschung und Entwicklung (5)
- Zentrum für Forschung, Entwicklung und Transfer (4)
- Fakultät für Informatik (3)
- Fakultät für Wirtschaftsingenieurwesen (3)
- Fakultät für Sozialwissenschaften (2)
Beech circular hollow laminated veneer lumber sections for temporary soil nailing applications
(2019)
Beech Laminated Veneer Lumber (LVL) circular hollow sections for use as temporary geotechnical soil nailing systems are developed within this thesis. Due to their permanent subsoil cement embedment, combined with high water saturation and permanent loading, the timber sections will lose strength and stiffness over time. Taking into account a duration of load factor for permanent loading of two years, it is recommended to reduce the short term tensile and bending strength of beech circular hollow sections to be used as geotechnical soil nails by 80%. In addition to the determination of material properties on small, clear specimens and full-sized cross-sections, an appropriate surface gluing quality between the veneers is fundamental to this subsoil application of the permanently cement-embedded, engineered timber product. The circular cross-section geometry and the permanently high-alkaline environment of the structural member is not covered by presently standardised testing and conditioning methods for examining LVL surface bond line quality. Standardised test methods had to be modified to determine bonding parameters for the circular, hollow LVL sections. As cement grout ensures the bond between the wooden nails and soil for the mobilisation of a soil reinforcement effect, a reliable connection between cement and wood is required. However, soluble wood constituents may inhibit cement hydration in the contact surface between the timber nails and cement. Pull-off tests on clear LVL specimens with different cement and wood surface modifications as well as the results of large-scale push-out tests are therefore presented. But to permanently ensure the contact between the wood and cement, a high degree of saturation above wood fibre saturation is necessary to keep the hollow sections in a swollen state without moisture-dependent wood shrinking. As no publications of wood moisture development in subsoil were available, long-term tests were performed, measuring the moisture content of subsoil-stored LVL in dependence on the soil moisture content, the suction and the precipitation during a time span of one year. Besides a negative cement influence on the material strength, a positive effect of cement coating on subsoil fungal destruction was realised, resulting in a significantly increased lifetime of cement-coated wood compared to uncoated wood. For temporary soil nailing applications, fungal wood deterioration was found to be of minor importance. But the reduced material strength due to a severe alkaline attack of wood demands a re-consideration of current soil nailing design methods, usually based on a mechanical limit equilibrium analysis of a rigid body motion where just tensile forces of the reinforcement elements are considered, and accompanying forces like bending moments and shear forces are neglected. Distributed fibre optic strain measurements of a steel-reinforced soil nail wall during a time span of six weeks reveal considerable nail curvatures, which are negligible in the case of ductile soil nails with low diameters, but are a significant factor for beech circular hollow laminated veneer lumber sections of larger diameters and brittle material behaviour.
In diesem Beitrag wird untersucht, wie sich das bedarfsgewichtete Pro-Kopf-Einkommen in Haushalten Alleinerziehender mit Kindern im Vergleich zu entsprechenden Haushalten mit verheirateten Eltern im Zuge der arbeits-, familien- und sozialpolitischen Reformen seit 1997 vor und nach staatlicher Umverteilung verändert hat. Zweitens wird mit Effekt-Dekompositionen analysiert, inwieweit Veränderungen der Einkommenssituation von alleinerziehenden und verheirateten Müttern auf Veränderungen ihrer Merkmale und deren Auswirkungen zurückgeführt werden können. Die Analysen basieren auf 19 Wellen des Sozio-ökonomischen Panels (SOEP) von 1997 bis 2015. Während das bedarfsgewichtete Netto-Pro-Kopf-Einkommen von alleinerziehenden Müttern auch dank staatlicher Transfer weitgehend unverändert geblieben ist, hat sich die Einkommenssituation von verheirateten Müttern vor allem aufgrund ihres steigenden Bildungsniveaus und ihrer gestiegener Erwerbstätigkeit verbessert. Die zunehmende Einkommensungleichheit zwischen beiden Familienformen kann demnach auf die zunehmend besseren Bildungsressourcen und die gesteigerte Arbeitsmarktaktivität verheirateter Mütter zurückgeführt werden, wohingegen Alleinerziehende vermehrt auf Sozialleistungen angewiesen waren.
Der Beitrag erläutert die Hintergründe des für einige Bauprodukte in Deutschland geforderten Nachweises, dass sie nicht glimmen und beschreibt die aktuelle rechtliche Situation. Er stellt das europäische Prüfverfahren EN 16733 kurz vor und legt die Folgen für Planer und Verwender der Bauprodukte dar. Schließlich wird ein Ausblick auf die zu erwartenden zukünftigen Entwicklungen gegeben.
Diskussionen um bauordnungsrechtliche Anforderungen bei nach Bauprodukteverordnung CE-gekennzeichneten Bauprodukten konzentriert sich häufig auf Fragen des Brandschutzes. Der Beitrag zeigt auf, wie auch die anderen Grundanforderungen an Bauwerke ("BWR" oder "BRCW") in den deutschen Landesbauordnungen und der Verwaltungsvorschrift technische Baubestimmungen konkretisiert werden. Die einzelnen BWR werden diskutiert und - wo möglich - mit einfachen Beispielen erläutert.
Der Beitrag erläutert das Konzept der Bausätze nach Bauproduktenverordnung (BauPVO), einer Sonderform der Bauprodukte. Es werden offene Fragen zum Bausatz diskutiert und das Verhältnis des nach BauPVO definierten Bausatzes zur nach den deutschen Bauordnungen definierten definierten Bauarten behandelt.
Innovative beech laminated veneer lumber (LVL) circular hollow sections for the use as temporary geotechnical soil nailing systems are currently being developed. Due to the permanent subsoil cement embedment, combined with high water saturation and permanent loading, the timber sections will lose strength and stiffness over time to a degree currently unknown. This paper presents the tensile and bending material properties of flat and curved beech LVL under various periods of immersion in a water–cement grout solution aiming at inducing both water saturation and long-term alkaline attack of the timber.
In total, 824 and 279 samples were tested in tension and bending, respectively. Results show that samples manufactured from 3 mm thick veneers result in tensile strength and stiffness 17% and 24% higher, respectively, than samples manufactured from 2 mm thick veneers. A reduction in the initial bending and tensile strength of up to 70% was found after 90 days of water saturation and cement contact. Taking into account a duration of load factor for permanent loading of two years, it is recommended to reduce the short-term tensile and bending strength of beech circular hollow sections to be used as geotechnical anchors by 80%.
In der vorliegenden Arbeit wird der Einfluss einer Beschleunigungsregelung auf das Regelverhalten von Servoantrieben untersucht. Auf einen Beschleunigungssensor wird verzichtet. Die Istbeschleunigung wird aus dem Positionsmesswert berechnet. Anhand eines verifizierten Modells für Positionsmessfehler wird der Einfluss der Positionsauflösung und der Messsignalqualität auf die berechnete Beschleunigung dargestellt. Basierend auf diesen Ergebnissen wird das Konzept einer kombinierten Strom- und Beschleunigungsregelung entwickelt und dessen Funktionalität nachgewiesen.
Die vorliegende Arbeit untersucht den Einsatz von Halbleitern großer Bandlückenenergie, wie Siliziumkarbid und Galliumnitrid, in Stromrichtern der Antriebstechnik. Diese Halbleiter weisen im Vergleich zu bipolaren IGBTs geringere Schaltverluste auf, wodurch die Schaltfrequenz deutlich erhöht werden kann. Das ermöglicht den Einsatz von Motorfiltern kompakter Bauform und geringen Kosten. Als Ergebnis erhält man einen Stromrichter mit hoher Stromreglerbandbreite und nahezu ideal sinusförmigen Ausgangsspannungen mit geringen Signalverzerrungen.
Werkstoffeinflüsse auf den Spritzgussprozess von hochgefüllten Phenol-Formaldehydharz Formmassen
(2019)
Im Rahmen der vorliegenden Arbeit wurden verschiedene duroplastische Formmassen laboranalytisch hinsichtlich der rheologischen und thermischen Eigenschaften untersucht. Es wurde u.a. gezielt die absolute Materialfeuchte gesteigert, um den Einfluss dieser auf das Fließ Härtungsverhalten zu charakterisieren. Anschließend wurden die Materialien auf einer hochinstrumentierten Spritzgussmaschine mit einem Fließspiralenwerkzeug untersucht. Dabei konnte ein direkter Zusammenhang zwischen dem Rückfluss und dem Plastifizierdrehmoment in Abhängigkeit der Materialfeuchte und der Prozessparameter detektiert werden . Des Weiteren wurden über die Differenzdruckmessung im Fließspiralenwerkzeug die scheinbaren Viskositäten über den Fließweg ermittelt. Hierbei konnten unterschiedliche Aufschmelzeffekte über die Fließweglänge in Abhängigke it der duroplastischen Formmasse, der absoluten Materialfeuchte und der Prozessparameter detektiert werden . Durch Schererwärmung konnte die Formmassentemperatur teilweise die Werkzeugtemperatur übersteigen. Hinsichtlich der mechanischen Eigenschaften (Schlagzähigkeit, Biegefestigkeit) konnten keine signifikanten Einflussgrößen detektiert werden. Hinsichtlich des Tg konnten systematischen Unterschiede detektiert und begründet werden. Die beste Möglichkeit zur Ermittlung des Tg lieferte die TMA. Die thermischen Glasübergänge korrelieren mit den in der DSC ermittelten Aushärtegraden , wobei mit steigender Materialfeuchte ein geringer Aushärtegrad detektiert wird.
The International Classification of Functioning, Disability and Health (ICF) Generic- 30 Set (previously referred to as Rehabilitation Set) is a minimal set of ICF categories for reporting and assessing functioning and disability in clinical populations with different health conditions along the continuum of care. Recently, the Italian Society of Physical and Rehabilitation Medicine (SIMFER) developed an Italian modification of the simple and intuitive descriptions (SID) of these categories. This study was the first one to implement the use of the SID in practice.1)
To implement the use of the ICF in clinical practice and research among Italian Residents in PRM. 2) To verify if the SID made the application of ICF Generic 30 Set more user-friendly than the original descriptions. 3) To examine the prevalence of functioning problems of patients accessing Rehabilitation Services to serve as reference for the development of an ICF-based clinical data collection tool.Multicenter cross-sectional study.
Italian Physical Medicine and Rehabilitation (PRM) outpatient rehabilitation services. Patients referring to Italian PRM outpatient rehabilitation services and Italian Residents in PRM.Each School of Specialization involved, randomly, received the ICF Generic-30 Set with the original descriptions or with the SID.
Residents collected over a 4-month period (April-July 2016) patients data related to the ICF Generic-30 Set categories. Moreover, the residents self- assessed their difficulty in using the ICF Generic-30 Set with the original descriptions or with the SID, through a Numeric Rating Scale (NRS).Ninety-three residents collected functioning data of 864 patients (mean aged 57.7±19.3) with ICF Generic-30 Set: 304 with the original descriptions and 560 with SID. The difficulty in using the ICF Generic-30 Set with SID was rated as lower than using the original descriptions (NRS = 2.8±2.5 vs 3.5±3.1; p<0.001).
The most common disease was the back pain (9.6%) and the most common altered ICF categories were b280 (76.3%) and b710 (72.9%).This multicenter cross-sectional study shown that the ICF Generic-30 Set is a valuable instrument for reporting and assessing functioning and disability in clinical populations with different health conditions and along the continuum of care and that SID facilitate the understanding of the ICF categories and therefore their use in clinical practice.
This National survey, improving the knowledge of ICF among Italian PRM residents, represents an important step towards the system-wide implementation of ICF in the healthcare system.
This scoping review aimed to generate an overview of existing quality management (QM) models for inpatient healthcare published in peer-reviewed literature.
Data sources
Peer-reviewed publications published until June 2016 were retrieved from the databases Medline, PubMed, CINAHL and Cochrane Library using search terms related to QM and models.
Study selection
Publications mentioning a QM model for general application in healthcare or inpatient care in their title or abstract were included. Languages considered were: English, French, German, Italian and Spanish.
Data extraction was 3-fold. First, publication characteristics were summarized. Second, the frequency of each identified model was documented and the publications were divided into conceptual and implementation publications. Third, relevant QM models were identified and information regarding the model, including content and relationship with other models, was extracted.
Of 925 retrieved publications, 213 were included. The included publications reported on 64 different QM models that were suitable for or used in inpatient care. Seventeen models were identified as being relevant. The 17 models were then categorized into three different levels: conceptual quality improvement models, concrete application models and country specific adaptations.
This scoping review provides an overview of 17 existing QM models for inpatient care and their relationships with each other. Various types of models with differing aspects and components exist. In searching for QM models, many different concepts like QM system, accreditation or methodologies appeared. For future investigation, concepts of interest should be clarified.