TY - RPRT A1 - Rabold, A. A1 - Schramm, M. T1 - Vibroakustik im Planungsprozess für Holzbauten – Modellierung, numerische Simulation, Validierung – Teilprojekt 4: Bauteilprüfung, FEM-Modellierung und Validierung KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings T2 - Proceedings of Euronoise 2015 KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - Stoßstellendämm-Maße von Massivholzelementen für die SEA basierte Berechnung nach EN 12354 T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Schanda, Ulrich T1 - VibWood. Planungshilfen zur schall- und schwingungstechnischen Beschreibung von Holzdecken bei tiefen Frquenzen T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, A. A1 - Schöpfer, F. T1 - Nachhaltiger Schallschutz gebäudetechnischer Anlagen KW - Holzbau KW - Schallmesstechnik Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Measured transmission functions from structure-borne sound sources in a timber-frame construction T2 - Proceedings of Euronoise 2015, Maastricht, Netherlands N2 - The aim of prEN 15657-2 is to provide engineering methods to estimate the structure-borne sound power input from machinery in situations where the source mobility matches or is lower than the receiver mobility. This situation often affects lightweight constructions such as timber-frame buildings. To estimate the sound pressure level in a room that is adjacent or distant from the room containing the source, the installed structure-borne sound power has to be propagated across at least one junction in the timber-frame construction. However, at present there are no generic, validated calculation models due to the complexity and the large variety of timber-frame constructions. A simplified approach to investigate and compare the structure-borne sound transmission is to treat the framed construction as a black box and only consider one parameter, a transmission function which is the ratio of the sound pressure level in the receiving room to the injected structure-borne sound power level. To get information about the variation of this transmission function in different timber-frame constructions, measurements were made in both the laboratory and the field. Experimental results are presented showing the variation due to different building configurations and the effect of the excitation position on the transmission function. KW - Schallmesstechnik KW - Holzbau Y1 - 2015 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Messungen der Körperschallintensität in einer Holzrahmenbaustruktur T2 - DAGA 2015, 41. Deutsche Jahrestagung für Akustik, Nürnberg, Deutschland. N2 - In den vergangenen Jahren hat der Holzbau auch im mehrgeschossigen Wohnungsbau an Bedeutung gewonnen. Zur Gewährleistung des Schallschutzes zwischen fremden Wohneinheiten sind Werkzeuge zur Berechnung der Schallübertragung in leichten Baustrukturen, wie zum Beispiel Holzrahmenbaukonstruktionen nötig. Solche Prognosemodelle müssen für Ingenieuranwendungen robust sein und auf abstrahierten, einfachen Rechenmodellen beruhen. Um die komplexen bertragungsmechanismen in solchen Rechenmodellen abbilden zu können, ist jedoch zunächst eine detaillierte Kenntnis des Schwingungs- und Körperschallverhaltens dieser Konstruktionen nötig. In diesem Beitrag werden Ergebnisse von Untersuchungen an einer konkreten Rahmenbaukonstruktion vorgestellt. Hierzu wurde im Labor für Schallmesstechnik an der Hochschule Rosenheim ein Leichtbauprüfstand errichtet. Grundlage für ein Prognosemodell könnten Berechnungsmethoden wie die Statistische Energieanalyse (SEA) darstellen. Um deren Anwendbarkeit zu prüfen, wurde die Verteilung der Körperschallenergie in einer Holzrahmenbauwand bei Anregung durch eine Punktquelle untersucht. Dabei wurde die Abnahme der Oberflächenschnelle mit steigendem Abstand zum Anregungspunkt sowie der Energiefluss in der Struktur mithilfe von Körperschallintensitäts-Messverfahren analysiert. KW - Schallmesstechnik KW - Holzbau Y1 - 2015 ER - TY - JOUR A1 - Hoßfeld, M. A1 - Kohrmann, Mathias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Messtechnische Analyse modifizierter Empfangsplattenprüfstände zur Ermittlung der Körperschallleistung haustechnischer Geräte JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik, DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Empfangsplatten KW - haustechnische Geräte KW - Schallmesstechnik Y1 - 2018 ER - TY - JOUR A1 - Mecking, Simon A1 - Châteauviex-Hellwig, Camille A1 - Rabold, Andreas T1 - Dämmstoffe aus nachwachsenden Rohstoffen in der Bauteilprüfung und in Prognosen JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Dämmstoffe KW - Schallmesstechnik Y1 - 2018 ER - TY - CHAP A1 - Rabold, Andreas T1 - Mehrgeschosser in Massivholzbauweise - Schalltechnische Planung und Ausführung T2 - Bauphysikertreffen, Hochschule für Technik Stuttgart, November 2017 KW - Schallmesstechnik Y1 - 2017 SP - 3 EP - 11 ER - TY - CHAP A1 - Rabold, A. A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzdecken Y1 - 2017 ER - TY - CHAP A1 - Schöpfer, F. T1 - Körperschallübertragung im Holzbau. Übertragungsfunktionen T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - JOUR A1 - Schöpfer, F. A1 - Hopkins, C. A1 - Mayr, A. R. A1 - Schanda, Ulrich T1 - Ansätze zur Prognose des Installationspegels im HolzLeichtbau JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau KW - Leichtbau Y1 - 2017 ER - TY - JOUR A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Measurement of transmission functions in lightweight buildings for the prediction of structure-borne sound transmission from machinery JF - Acta Acustica united with Acustica KW - Schallmesstechnik KW - Leichtbau Y1 - 2017 VL - 2017 IS - 103 SP - 451 EP - 464 ER - TY - JOUR A1 - Schöpfer, F. A1 - Hopkins, C. A1 - Mayr, A. A1 - Schanda, Ulrich T1 - Prediction of noise from machinery in timber-frame buildings using transmission functions JF - Proceedings of ICSV24 N2 - To ensure that building regulations are satisfied, the sound pressure level due to machinery has to be predicted at the design stage of a new building. With the increasing popularity of multistory timber dwellings, prediction becomes an important issue for designers and consultants. At present previous project experience is often used when considering the design of wall and floor constructions and the mounting positions for machinery. Simple tools to calculate the sound pressure levels in rooms based on machinery data and construction details are not currently available. The approach involves two stages: firstly the description of the source and secondly the prediction of vibration transmission across the building and sound radiation into the rooms. In this paper a simple empirical model is proposed for the second stage. This approach is based on measured transmission functions that are defined as the average sound pressure level in a receiving room relative to the injected structure-borne sound power. This is a logical extension of approaches to characterize structure-borne sound sources that also use a power based descriptor (e.g. prEN15657:2016-02: Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions) and provides a simple method to estimate the sound pressure level in a room. KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - JOUR A1 - Châteauviex-Hellwig, C. A1 - Mecking, S. A1 - Brummer, B. A1 - Rabold, A. T1 - Anwendung zur SEA basierten Berechnung nach EN 12354 für Massivholzelemente JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Massivholz Y1 - 2016 ER - TY - CHAP A1 - Müller, M. A1 - Schulze, Achim A1 - Isenberg, J. A1 - Hund, B. A1 - Beyer, H.-G. T1 - Influence of the water resistivity on the temperature coeffizients of industrial silicon solar cells and on the expected performance behavior T2 - Proceedings of the 25th EU-PVSEC KW - Photovoltaik KW - Industrial silicon solar cells KW - Performance behavior Y1 - 2010 ER - TY - CHAP A1 - Hinken, D. A1 - Milsted, A. A1 - Bock, R. A1 - Fischer, B. A1 - Bothe, K. A1 - Schütze, M. A1 - Isenberg, J. A1 - Schulze, Achim A1 - Wagner, M. T1 - Determination of the Base-Dopant Concentration of Large-Aria Crystalline Solar Cells T2 - IEEE Trans. Electronic Devices KW - Photovoltaik KW - Crystalline Silicon Solar Cells Y1 - 2010 PB - IEEE Electronic Devices Society CY - USA, North Carolina ER - TY - JOUR A1 - Ackermann, N A1 - Gutewort, V. A1 - Quinque, M. A1 - Kühne, M. A1 - Stein v. Kamienski, E. A1 - Schulze, Achim A1 - Wichtendahl, R. T1 - Final testing: a secure release gate towards module manufacturing JF - Photovoltaics International KW - Photovoltaik KW - Module manufacturing Y1 - 2010 IS - 8 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence and stability of static shells to the Vlasov-Poisson System with a fixed central point mass JF - Mathematical Proceedings of the Cambridge Philosophical Society KW - Photovoltaik KW - Static shells KW - Vlasov-Poisson system Y1 - 2018 IS - 146 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence of axially symmetric solution to the Vlasov-Poisson System depending on Jacobi's Integral JF - Mathematical Proceedings of the Cambridge Philosophical Society KW - Photovoltaik KW - Axielly symmetric solution KW - Vlasov-Poisson system Y1 - 2018 IS - 6/2009 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence and stability of static shells to the Vlasov-Poisson system JF - Analysis KW - Static shells KW - Photovoltaik KW - Vlasov-Poisson system Y1 - 2018 IS - 26 ER -