TY - THES A1 - Scheffler, Thomas T1 - Werkstoffeinflüsse auf den Spritzgussprozess von hochgefüllten Phenol-Formaldehydharz­ Formmassen N2 - Im Rahmen der vorliegenden Arbeit wurden verschiedene duroplastische Formmassen laboranalytisch hinsichtlich der rheologischen und thermischen Eigenschaften untersucht. Es wurde u.a. gezielt die absolute Materialfeuchte gesteigert, um den Einfluss dieser auf das Fließ­ Härtungsverhalten zu charakterisieren. Anschließend wurden die Materialien auf einer hochinstrumentierten Spritzgussmaschine mit einem Fließspiralenwerkzeug untersucht. Dabei konnte ein direkter Zusammenhang zwischen dem Rückfluss und dem Plastifizierdrehmoment in Abhängigkeit der Materialfeuchte und der Prozessparameter detektiert werden . Des Weiteren wurden über die Differenzdruckmessung im Fließspiralenwerkzeug die scheinbaren Viskositäten über den Fließweg ermittelt. Hierbei konnten unterschiedliche Aufschmelzeffekte über die Fließweglänge in Abhängigke it der duroplastischen Formmasse, der absoluten Materialfeuchte und der Prozessparameter detektiert werden . Durch Schererwärmung konnte die Formmassentemperatur teilweise die Werkzeugtemperatur übersteigen. Hinsichtlich der mechanischen Eigenschaften (Schlagzähigkeit, Biegefestigkeit) konnten keine signifikanten Einflussgrößen detektiert werden. Hinsichtlich des Tg konnten systematischen Unterschiede detektiert und begründet werden. Die beste Möglichkeit zur Ermittlung des Tg lieferte die TMA. Die thermischen Glasübergänge korrelieren mit den in der DSC ermittelten Aushärtegraden , wobei mit steigender Materialfeuchte ein geringer Aushärtegrad detektiert wird. KW - Duroplaste KW - duroplastische Formmassen KW - Phenolharz KW - Feuchtegehalt KW - Rotationsrheometer KW - Hochdruck-DSC KW - Fließspirale KW - Forminnendruckmessung KW - Aushärtegrad Y1 - 2019 UR - http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa2-322005 ER - TY - JOUR A1 - Hummel, Sabine A1 - Schemme, Micheal A1 - Karlinger, Peter T1 - GmbH – Glasfaserhybride mit bester Haftung: Variotherme Temperierung für Organobleche JF - Plastverarbeiter N2 - Durch Integrieren der Variothermie können Organobleche wirtschaftlich und technisch verbessert zu Hybridbauteilen verarbeitet werden. Somit steigert sich der Wettbewerbsvorteil gegenüber konventionellen Werkstoffen weiter. An einer Technische Hochschule wird seit mehr als zehn Jahren intensiv an der Thematik der Verbindungstechnologien sowie den Haftungsmechanismen zwischen endlosfaserverstärkten Thermoplasten, den sogenannten Organoblechen, und angespritzten Funktionsstrukturen geforscht. Im Fokus stehen prozesstechnische Einflüsse, die die Verbundhaftung der Hybridleichtbaustrukturen erhöhen. KW - Organoblech KW - Variotherm KW - Verbundhaftung KW - langfaser verstärkte Thermoplaste Y1 - 2019 UR - https://www.plastverarbeiter.de/88054/variotherme-temperierung-fuer-organobleche/ VL - 07/2019 IS - 07 PB - Hüthig GmbH CY - Heidelberg ER - TY - JOUR A1 - Obermeier, Frederik A1 - Schumacher, Mara A1 - Barth, Simon A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Verstärkung von Polypropylen mit Holzfasern durch Direkt-Compoundierung JF - Zeitschrift Kunststofftechnik N2 - Ergänzend zum bisherigen Stand der Wissenschaft und Technik wurden in dieser Veröffentlichung Fichtefasern aus einem thermo-mechanischen Aufschlussprozess über einen Spritzgusscompounder mit Polypropylen und Haftvermittler direkt compoundiert. Bei der direkten einstufigen Verarbeitung wurde ein steigender Holzfaseranteil bis 30 Gew.-% untersucht. Die Charakterisierung der Materialkombinationen erfolgte durch Zugversuche, Melt-Flow-Rate Messungen, Dichtebestimmung, Mikroskopie und Kerbschlagbiegeversuche. Bei steigendem Holzfaseranteil wird eine Steigerung der Zugeigenschaften, der Viskosität und der Dichte festgestellt. Die Kerbschlagzähigkeit bleibt bei steigendem Holzfaseranteil im Rahmen der Standardabweichung konstant, ist jedoch im Vergleich zum unveränderten Grundpolymer geringer. KW - Direkt-Compoundierung KW - Spritzgusscompounder KW - Holz KW - Holzfaser KW - Polypropylen Y1 - 2021 VL - 2021 IS - 2 SP - 87 EP - 111 PB - Carl Hanser Verlag CY - München ER - TY - JOUR A1 - Obermeier, Frederik A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Thermoplastic Hybrid Composites with Wood Fibers: Bond Strength of Back-Injected Structures JF - Materials N2 - Due to their lightweight potential and good eco-balance, thermoplastic hybrid composites with natural fiber reinforcement have long been used in the automotive industry. A good alternative to natural fibers is wood fibers, which have similar properties but are also a single-material solution using domestic raw materials. However, there has been hardly any research into wood fibers in thermoplastic back-injected hybrid composites. This article compares the bond strength of an injection molded rib from polypropylene (PP) and wood fibers to different non-wovens. The non-wovens consisted of wood fibers (spruce) or alternatively natural fibers (kenaf, hemp), both with a polypropylene matrix. Pull-off and instrumented puncture impact tests show that, given similar parameters, the natural and wood-fiber-hybrid composites exhibit very similar trends in bond strength. Further tests using viscosity measurements, microscopy, and computed tomography confirm the results. Wood-fiber-reinforced thermoplastic hybrid composites can thus compete with the natural fiber composites in terms of their mechanical behavior and therefore present a good alternative in technical semi-structural applications. KW - biocomposites KW - wood fibers KW - polypropylene KW - back-injection molding KW - bond strength Y1 - 2022 UR - https://doi.org/10.3390/ma15072473 VL - 15 IS - 7 SP - 2473 ER - TY - CHAP A1 - Obermeier, Frederik A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Verbundhaftung von thermoplastischen Hybridverbunden mit Natur-und Holzfaserverstärkung T2 - Technomer 2021 N2 - Leichtbau, ressourcenschonende Herstellungstechnologien und die Verwendung nachwachsender Rohstoffe sind zentrale Themen des 21. Jahrhunderts. Thermoplastische Hybridverbunde mit Naturfaserverstärkung sind seit langem Stand der Technik und werden vor allem in der Automobilindustrie verwendet. Holzfasern sind in diesem Bereich jedoch noch nicht umfassend untersucht. Der Vortrag befasst sich mit dem Potenzial von Holzfasern (Fichte) für thermoplastische Hybridverbunde im Vergleich zu Naturfasern (Kenaf, Hanf). Dabei werden mechanische Untersuchungen (Kopf-Zug-Versuch und instrumentierter Durchstoßversuch) von zwei hybriden Bauteilen gezeigt. Die Verbundhaftung wird bei unterschiedlichen Schädigungsmechanismen in Abhängigkeit ausgewählter Parameter dargestellt. Die relevanten Effekte werden ergänzend durch Mikroskopie und Computertomographie beschrieben. Es zeigt sich, dass thermoplastische Hybridverbunde mit Holzfasern mit dem Benchmark aus Naturfasern mechanisch konkurrieren können. Zudem zeigen Holzfasern andere Vorteile wie geringe Rohstoffrisiken. KW - Thermoplaste KW - Holzfasern KW - Naturfasern KW - Hybridverbunde KW - Verbundhaftung Y1 - 2021 SN - 978-3-939382-15-7 SP - 1 EP - 12 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - CHAP A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Schemme, Michael A1 - List, Manuela T1 - Vergleich von unterschiedlichen Aufschmelzverfahren und die daraus resultierenden Eigenschaften für WPC-Spritzgussteile T2 - Technomer 2021 N2 - Leichtbau und ressourcenschonende Herstellungstechnologien sind zentrale Themen des 21. Jahrhunderts. Im Zuge dessen werden vermehrt Naturprodukte in der Kunststoffverarbeitung eingesetzt. Eine Sparte dabei bilden Holz-Polymer Werkstoffe (WPC), welche seit 2014 eine Verdoppelung in der Produktionsmenge erfahren haben. Dabei werden meist Holzpartikel statt Fasern als Füll- und Verstärkungsstoff eingesetzt. Der Vortrag befasst sich mit dem Vergleich von verschiedenen Aufbereitungsmöglichkeiten von WPCs mit Holzfaserverstärkung hinsichtlich Mechanik und thermischer Schädigung des temperaturempfindlichen Holzes. Teil der Untersuchung ist die einstufige Verarbeitung mittels eines Injection-Moulding-Compounders sowie die zweistufige Verarbeitung mittels Compounder und Heiz-Kühl-Mischer mit anschließendem Urformen an der Spritzgussmaschine. KW - Holzfasern KW - Compoundierverfahren KW - Spritzguss KW - Thermische Beanspruchung KW - Mechanik Y1 - 2021 SN - 978-3-939382-15-7 SP - 1 EP - 13 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - CHAP A1 - Seliger, Norbert A1 - Rackles, J. A1 - Schwarzbauer, H. A1 - Wolfgang, E. A1 - Bolz, S. ED - Peier, D. ED - Hirsch, H. T1 - Kompakte und hochzuverlaessige Aufbau- und Verbindungstechnik fuer leistungselektronische Systeme am Beispiel Starter Generator T2 - Proceedings ECT 2002: Electronics and communications in traffic systems. N2 - A compact and high-reliable converter design for an Integrated Starter Generator is presented. The concept is based on integration of the power switches with both the cooling system and the DC link capacitor, which optimizes the thermal management and minimizes inductive and conductive losses. The materials and joining technologies are selected in such a way that the converter can be operated up to 125 C ambient temperature. Therefore, the water cooling system of the combustion engine can directly be used. The paper further reports on circuit simulation results verifying the converter design and on first electrical measurements obtained on a functional prototype operating under normal load conditions (6kW rated power). KW - DC/DC converter Y1 - 2002 SN - 3-7785-2885-8 SP - 120 EP - 128 PB - MESAGO Messe- und Kongress-GmbH CY - Stuttgart (Germany) ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - High temperature, high power density packaging for automotive applications T2 - IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03. N2 - The automotive industry is pushing power electronic packaging to higher operating and heatsink temperatures while still requiring very high power densities due to limited space. Currently, the power electronics that is implemented within the engine compartment of the vehicle must operate with heatsink temperatures of approximately 85/spl deg/C and this temperature can be expected to increase to 125/spl deg/C in the near future. The high temperature operation of the power electronic structure is fundamentally limited by the employed materials maximum temperatures. A packaging concept is introduced that describes a structure realisation that enables the materials to operate at high ambient temperatures without exceeding their individual maximum temperatures. This in turn allows the complete power electronic structure to operate at a higher system temperature. In this paper, the packaging concept that can be used to meet these difficult requirements of high temperature and high power-density is introduced, discussed and implemented. Two case studies are considered and implemented to illustrate the packaging concept. KW - high temperature electronic packaging Y1 - 2003 U6 - https://doi.org/10.1109/PESC.2003.1218329 SP - 425 EP - 430 PB - IEEE ER - TY - CHAP A1 - Seliger, Norbert A1 - Rackles, J. A1 - Schwarzbauer, H. A1 - Kiffe, W. A1 - Bolz, S. T1 - Compact and robust power electronics packaging and interconnection technology for an Integrated Starter Generator T2 - Optimization of the Power Train in Vehicles by Using the Integrated Starter Generator (ISG) KW - power electronics packaging Y1 - 2002 SN - 9783816920779 SP - 248 EP - 255 PB - expert verlag GmbH ER - TY - CHAP A1 - Rackles, J. A1 - Seliger, Norbert ED - Graf, A. T1 - Optimization of DC-Link Capacitors in an Integrated Starter Generator Unit T2 - The New Automotive 42V Power Net KW - capacitor Y1 - 2003 SN - 978-3-8169-1992-6 PB - expert verlag ER - TY - CHAP A1 - Fürböck, C. A1 - Thalhammer, R. A1 - Litzenberger, M. A1 - Seliger, Norbert A1 - Pogany, D. A1 - Gornik, E. A1 - Wachutka, G. T1 - Internal Characterisation of IGBTs Using the Backside Laserprober Technique T2 - Jahrestagung der GMe, Bad Hofgastein Tagungsband 1999 KW - IGBT Y1 - 1999 SN - 3-901678-04-8 PB - Gesellschaft für Mikroelektronik (GMe) ER - TY - CHAP A1 - Seliger, Norbert A1 - Faltlhauser, Georg T1 - Progressive Expansion Sampling of Quasi-Static Magnetic Fields for EMI Noise Detection and Equivalent Source Modeling T2 - Proceedings EMC Europe 2023 N2 - We introduce a quick and accurate quasi-static magnetic field scanning technique by employing a progressive sampling method in an unconfined input space. The proposed machine learning algorithm is tested against uniform sampling on a printed circuit board test structure. We prove allocation of multiple, separated regions with predefined tangential field strengths at MHz frequencies. The feasibility of equivalent magnetic dipole source modeling based on a small number of samples is demonstrated. Compared to uniform testing, progressive expansion sampling detects contours of given field limits in less than 3% of the reference measurement time. KW - magnetic near field KW - Gaussian process classifier KW - EMI Y1 - 2023 PB - IEEE CY - Krakov ER - TY - JOUR A1 - Seliger, Norbert A1 - Faltlhauser, Georg T1 - Progressive Expansion Sampling of Quasi-Static Magnetic Fields in Unconfined Regions JF - IEEE Transactions on Components, Packaging and Manufacturing Technology N2 - We present a fast and accurate measurement technique for quasi-static magnetic fields by employing a progressive sampling method in an unconfined input space. The proposed machine learning algorithm is tested against uniform sampling on printed circuit board test structures and a buck converter. We prove allocation of multiple, separated regions with predefined lateral field limits at MHz frequencies. The feasibility of equivalent magnetic dipole source modeling based on a small number of samples is demonstrated. Compared to uniform testing, progressive expansion sampling identifies contours of given field limits in less than 3% of the reference measurement time. KW - Progressive Expansion Sampling KW - Near-Field Scanning KW - Machine Learning KW - Gaussian Process Classifier KW - MoM modeling Y1 - 2023 U6 - https://doi.org/10.1109/TCPMT.2023.3283285 ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - A volumetric optimization of a low pass filter T2 - Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) KW - low pass filter Y1 - 2023 U6 - https://doi.org/10.1109/IAS.2001.955934 SP - 2224 EP - 2231 PB - IEEE ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - A very high density, heatsink mounted inductor for automotive applications T2 - Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344) KW - inductor Y1 - 2023 U6 - https://doi.org/10.1109/IAS.2002.1042672 SP - 948 EP - 954 PB - IEEE ER - TY - CHAP A1 - Fürböck, C. A1 - Thalhammer, R. A1 - Litzenberger, M. A1 - Seliger, Norbert A1 - Pogany, D. A1 - Gornik, E. A1 - Wachutka, G. T1 - A differential backside laserprobing technique for the investigation of the lateral temperature distribution in power devices T2 - 11th International Symposium on Power Semiconductor Devices and ICs. ISPSD’99 Proceedings KW - backside laserprobing Y1 - 2023 U6 - https://doi.org/10.1109/ISPSD.1999.764095 SP - 193 EP - 196 PB - IEEE ER - TY - CHAP A1 - Seliger, Norbert A1 - Ramminger, S. A1 - Franke, T. A1 - Wachutka, G. T1 - A study of heel crack failures in wire bonds under mechanical cycling T2 - Proceedings of Micromat 2000 KW - wire bond KW - reliability KW - heel crack Y1 - 2023 ER - TY - CHAP A1 - Fürböck, C. A1 - Pogany, D. A1 - Litzenberger, M. A1 - Gornik, E. A1 - Seliger, Norbert A1 - Gossner, H. A1 - Müller-Lynch, T. A1 - Stecher, M. A1 - Werner, W. T1 - Interferometric temperature mapping during ESD stress and failure analysis of smart power technology ESD protection devices T2 - Electrical Overstress/Electrostatic Discharge Symposium Proceedings KW - ESD KW - smart power device Y1 - 2023 U6 - https://doi.org/10.1109/EOSESD.1999.819067 SP - 241 EP - 250 PB - IEEE ER - TY - JOUR A1 - Fürböck, C. A1 - Pogany, D. A1 - Litzenberger, M. A1 - Gornik, E. A1 - Seliger, Norbert A1 - Gossner, H. A1 - Müller-Lynch, T. A1 - Stecher, M. A1 - Werner, W. T1 - Interferometric temperature mapping during ESD stress and failure analysis of smart power technology ESD protection devices JF - Journal of Electrostatics KW - ESD KW - smart power device Y1 - 2023 VL - 49 SP - 195 EP - 213 ER - TY - CHAP A1 - Gerstenmaier, Y.C. A1 - Wachutka, G. A1 - Seliger, Norbert T1 - Efficient calculation of transient temperature fields responding to fast changing heatsources over long duration in high frequency DC/DC converter T2 - Proceedings of THERMINIC KW - DC/DC converter KW - thermal management Y1 - 2023 SP - 297 EP - 302 ER - TY - CHAP A1 - Renken, F. A1 - Ehbauer, G. A1 - Karrer, V. A1 - Knorr, R. A1 - Ramminger, S. A1 - Seliger, Norbert A1 - Wolfgang, E. T1 - Reliability of high temperature inverters for HEV T2 - Proceedings Power Conversion Conference KW - HEV KW - Reliability KW - High-Temperature Electronics Y1 - 2023 U6 - https://doi.org/10.1109/PCCON.2007.373022 SP - 563 EP - 568 PB - IEEE CY - Nagoya ER - TY - JOUR A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Seliger, Norbert A1 - Hofsajer, I.W. T1 - Integral 3-D thermal, electrical and mechanical design of an automotive DC/DC converter JF - IEEE Transactions on Power Electronics KW - DC/DC converter Y1 - 2023 VL - 20 IS - 3 SP - 566 EP - 575 PB - IEEE ER - TY - JOUR A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Seliger, Norbert A1 - Hofsajer, I.W. T1 - High density packaging of the passive components in an automotive DC/DC converter JF - IEEE Transactions on Power Electronics KW - DC/DC converter Y1 - 2023 VL - 20 IS - 2 SP - 268 EP - 275 PB - IEEE ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Seliger, Norbert A1 - Hofsajer, I.W. T1 - Design and evaluation of an automotive integrated system module T2 - Conference Record of the 2005 Industry Applications Conference KW - power module Y1 - 2023 SP - 1144 EP - 1151 PB - IEEE ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - Integral design of a high power density DC/DC converter for harsh environments T2 - European Conference on Power Electronics and Applications KW - DC/DC converter Y1 - 2023 PB - IEEE ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - Interleaving optimization in synchronous rectified DC/DC converters T2 - IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) KW - DC/DC converter Y1 - 2023 SP - 4655 EP - 4661 PB - IEEE ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - An improved 3D integrated DC/DC converter for high temperature environments T2 - IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) KW - DC/DC converter Y1 - 2023 SP - 2779 EP - 2785 PB - IEEE ER - TY - CHAP A1 - Röhrich, A. A1 - Hirsch, H. A1 - Seliger, Norbert T1 - EMC-optimised design of a converter power stage by reduction of surface currents T2 - IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) KW - EMC Y1 - 2023 SP - 82 EP - 85 PB - IEEE ER - TY - JOUR A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - A high-density heat-sink-mounted inductor for automotive applications JF - IEEE Transactions on Industry Applications KW - inductor Y1 - 2023 VL - 40 IS - 4 SP - 1031 EP - 1038 PB - IEEE ER - TY - CHAP A1 - Wolfgang, E. A1 - Lefranc, G. A1 - Seliger, Norbert A1 - Berg, H. A1 - Licht, T. T1 - Zuverlässige Leistungselektronik für die Automobiltechnik T2 - ETG-Tagung Bauelemente der Leistungselektronik und ihre Anwendungen KW - Power electronics Y1 - 2023 PB - ETG CY - Bad Nauheim ER - TY - CHAP A1 - Röhrich, A. A1 - Hirsch, H. A1 - Seliger, Norbert T1 - Built-in EMC in der Aufbau- und Verbindungstechnik am Beispiel des integrierten Startergenerators T2 - Proceedings Electronic & Communications in Traffic Systems (ECT'02) KW - EMC Y1 - 2023 ER - TY - CHAP A1 - Röhrich, A. A1 - Hirsch, H. A1 - Seliger, Norbert T1 - EMC modeling of a compact packaging technology of a crankshaft starter generator T2 - International Conference of Electromagnetic Compatibility (ICEMC 2002) KW - EMC modeling Y1 - 2023 ER - TY - CHAP A1 - Hirsch, H. A1 - Röhrich, A. A1 - Seliger, Norbert T1 - EMV-optimierter Entwurf durch gezielte Reduktion von Oberflächenströmen T2 - 12. Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit KW - EMC Y1 - 2023 SN - 3-8007-2810-9 SP - 689 EP - 696 PB - VDE-Verlag GmbH CY - Düsseldorf ER - TY - CHAP A1 - Gerber, M. A1 - Ferreira, J.A. A1 - Hofsajer, I.W. A1 - Seliger, Norbert T1 - A high power density DC/DC converter for automotive applications T2 - SAUPEC 2002 Proceedings of the Eleventh Southern African Universities Power Engineering Conference KW - DC/DC converter Y1 - 2023 PB - IEEE ER - TY - CHAP A1 - Seliger, Norbert A1 - Honsa, Johannes T1 - Time-variable Mutual Inductance for Enhanced Inductive Power Transmission T2 - Proceedings International Symposium on Fundamentals of Electrical Engineering 2023 (ISFEE 2023) N2 - Enhanced inductive power transmission (IPT) between coaxially arranged circular coils is introduced by time-modulation of the mutual inductance. This modulation is accomplished by coherent switching of the short circuit current induced in a third loop. An analytical circuit model supporting the design for future time-modulated IPT systems is derived. We demonstrate an increase in load rms-voltage by 13% (28% gain in power) compared to an unmodulated transfer on an experimental system operating at fundamental frequencies ranging from 40kHz to 500kHz. KW - Mutual Inductance KW - Inductive Power Transmission KW - Time-variable Inductance Y1 - 2023 SN - 979-8-3503-0856-3 U6 - https://doi.org/10.1109/ISFEE60884.2023.10637204 PB - IEEE CY - Bucharest, Romania ER - TY - CHAP A1 - Seliger, Norbert A1 - Helmbrecht, Cordula T1 - A high-frequency performance and degradation study of adhesive conductive EMI shielding tapes during High-Temperature Storage T2 - Proccedings CIPS 2024 - 13th International Conference on Integrated Power Electronics Systems N2 - The variation of the contact impedance of adhesive conductive EMI shielding tapes under high temperature storage (HTS) of 110degC is investigated. The adhesive tapes under test are implemented as signal return paths in microstrip lines. Changes in the ground plane impedance by adhesive deterioration are analyzed by S-parameter measurements from 1MHz to 3GHz. A circuit model for contact impedance degradation is proposed and applied in simulation of board level shielding. Contact resistance and contact capacitance are found to increase significantly after 2400h, causing a declined magnetic field shielding effectiveness by 30 dB below 500 MHz. KW - EMI KW - Shielding tape KW - High-Temperature Storage KW - adhesive conductive EMI shielding tape Y1 - 2024 SN - 978-3-8007-6288-0 SN - 0341-3934 SP - 297 EP - 303 PB - VDE VERLAG GMBH CY - Düsseldorf ER - TY - JOUR A1 - Puntigam, Stephan A1 - Karlinger, Peter T1 - Einfluss der Abwärme des Spritzgusswerkzeugs auf die Produktion unter Reinraumbedingungen JF - ReinRaumTechnik N2 - Der Spritzguss unter Reinraumbedingungen spielt gerade in der heutigen Zeit eine immer wichtigere Rolle. Am Markt werden bereits unterschiedliche Lösungen angeboten, um die steigenden Anforderungen verschiedener Branchen und technischer Regelwerke zu erfüllen. In letzter Zeit wird unter anderem auch besonderes Augenmerk auf die Nutzung von technischen und Hochtemperatur-Kunststoffen gelegt. Gerade bei Kunststoffen mit hohen Werkzeugtemperaturen können die thermischen Effekte im Werkzeugbereich die Reinraumströmung negativ beeinflussen. Dadurch werden Partikel unkontrolliert verteilt und eine entsprechende Reinheit des Produkts kann nicht gewährleistet werden. Im Rahmen umfassender Untersuchungen wurden diese Effekte analysiert und Lösungsansätze erarbeitet. KW - Reinraum KW - CFD Y1 - 2022 VL - 2022 IS - 4 SP - 36 EP - 41 PB - Wiley ER - TY - JOUR A1 - Puntigam, Stephan A1 - Karlinger, Peter T1 - Spritzgusswerkzeuge im Reinraum Eine Analyse des Kamineffekts in der Kunststoffverarbeitung JF - cleanroom & processes N2 - Die Reinraumtechnik zielt darauf ab, mit gerichteten partikelfreien Luftströmungen die im Reinraum stattfindenden Prozesse vor Fremdeinflüssen zu schützen. Die Spritzgussproduktion stellt die Reinraumtechnik dabei vor besondere Herausforderungen. Im Bereich des Spritzgusswerkzeugs können aufgrund des relativ hohen Temperaturunterschieds zur Reinraumluft Kamineffekte auftreten, die der Reinraumströmung entgegen wirken. Im Folgenden wird deshalb der thermische Einfluss eines Spritzgusswerkzeugs exemplarisch bei unterschiedlichen Temperaturen untersucht. Dazu werden Strömungsvisualisierungen mittels Nebel und Schlierenfotografie sowie Strömungssimulationen genutzt. Bereits relativ niedrige Werkzeugtemperaturen von 40 °C reichten aus, um einen Kamineffekt im Werkzeugbereich entstehen zu lassen, der die Reinraumströmung ungünstig beeinflusst. Erst durch den Einsatz einer Filter-Fan-Unit über dem kritischen Werkzeugbereich konnte die Luftströmung auch bei höheren Werkzeugtemperaturen kontrolliert werden. KW - Reinraum KW - CFD Y1 - 2023 VL - 2023 IS - 3 SP - 110 EP - 116 PB - ECV Editio Cantor Verlag CY - Aulendorf ER - TY - CHAP A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Müller, Norbert A1 - Ruckdäschel, Holger T1 - Cellulosefaserverstärktes Polypropylen – Eigenschaftsbeeinflussung durch die Schmelzeaufbereitung T2 - Technomer 2023 N2 - Verarbeitungstemperaturen, Verweilzeit und Scherkräfte sind entscheidend, um die strukturelle Integrität von cellulosebasierten Fasern zu gewährleisten. In dieser Studie wurden die Einflüsse durch die Schmelzeaufbereitung eines cellulosefaserverstärkten Polypropylens auf die Faser und den Faserverbund untersucht. Die Schmelze wurde in einem Plastographen mit verschiedenen Rotordrehzahlen, Schmelzetemperaturen und Verweilzeiten aufbereitet. Um die Auswirkung der Einspeisungsmethode auf den Faserabbau zu analysieren, wurden die Fasern entweder direkt der thermoplastischen Schmelze oder zusammen mit dem Kunststoffgranulat dem Plastographen zugeführt. Die Zugabe der Fasern in die Schmelze geht mit einer erhöhten thermischen und verminderten mechanischen Belastung der Fasern einher. Bei der Prüfung der mechanischen Eigenschaften der verschieden aufbereiteten Compounds zeigten sich signifikante Unterschiede. Wurden die Fasern direkt der Schmelze hinzugefügt, so führte dies zu einer deutlich reduzierten Zugfestigkeit. Optische Unterschiede in den Schliffbildern der spritzgegossenen Prüfstäbe sowie in den Faserlängen nach Compoundierung konnten nicht festgestellt werden. Die verminderte Festigkeit wird folglich auf die unterschiedliche thermische Belastung der Faser während der Verarbeitung zurückgeführt. KW - Cellulosefaser KW - Faserververstärkung KW - Polypropylen KW - Schmelzeaufbereitung KW - Faserbeschickung Y1 - 2023 SN - 978-3-939382-16-4 SP - 1 EP - 14 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - CHAP A1 - Seliger, Norbert A1 - Honsa, Johannes T1 - A Planar Magneto-Inductive Device with Modulated Mutual Inductance for Wireless Power Transmission T2 - 2023 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC) N2 - A Magneto-Inductive Wave (MIW) structure for wireless power transfer (WPT) is proposed with switchable mutual inductance between neighbored coupling coils. Orthogonally placed switchable short circuit loops are added in order to modulate the wave propagation properties of the MIW structure without changing the resonance frequency. We derive an analytical model based on lumped circuit analysis for the MIW waveguide and successfully evaluate the theoretical findings by circuit modeling and field simulation. We demonstrate switchable, i.e. addressable, guided wireless power transfer along an experimental MIW structure at a resonance frequency of 20.5 MHz. KW - Magneto-Inductive Device, Wireless Power Transmission, Mutual Inductance Y1 - 2023 SN - 979-8-3503-2060-2 U6 - https://doi.org/10.1109/APWC57320.2023.10297488 SN - 2766-287X SP - 26 EP - 31 PB - IEEE CY - Venice (Italy) ER - TY - CHAP A1 - Seliger, Norbert T1 - A Tunable Wire Loop Inductor based on Bistable Compliant Mechanism T2 - 25th International Microwave and Radar Conference (MIKON) N2 - By axially loading of a cylindrical wire we utilize the first order buckling mode to form the shape of a segment of a wire loop inductor. The shape of the deformed wire is expressed in analytical form and provides the basis for a semi-empirical formulation of the loop inductance. Combining several buckling segments and taking advantage of the snap-through behavior of such a segment, the shape of the wire loop in air and hence the loop inductance can be varied mechanically on purpose. The analytical model for the tunable inductance enables a design methodology for bistable compliant inductors. We present two designs of mechanically tuned inductors in the range from 20nH to 50nH. Furthermore the electromagnetic properties of the proposed innovative components are confirmed by method of moments numerical modeling based on quasi-static magnetic fields and by experiment. We finally show that the design process is applicable to regular plane polygonal inductors representing multi-stable compliant stages. KW - tunable inductor KW - bistable compliant mechanism KW - buckling mode KW - loop inductance Y1 - 2024 SN - 978-83-969726-0-6 U6 - https://doi.org/10.23919/MIKON60251.2024.10633977 SP - 209 EP - 214 PB - IEEE, Warsaw University of Technology CY - Wroclaw, Poland ER - TY - CHAP A1 - Seliger, Norbert A1 - Leirich, Nico T1 - Compliant Mechanism based Planar Inductors for Reconfigurable Magneto-Inductive Wave Devices T2 - 18th International Congress on Artificial Materials for Novel Wave Phenomena - Metamaterials 2024 N2 - A reconfigurable planar inductor based on bistable compliant mechanism is proposed. Flexible snapping of wire elements is used for modification of the loop area and self inductance as well as for the mutual coupling between laterally arranged multiple inductors in a magneto-inductive wave (MIW) device. A mechanical model is presented building the basis for an analytical inductance model. The bistable reconfigurability is demonstrated experimentally and confirmed by numerical simulation results. KW - Magneto-Inductive-Wave Device KW - Reconfigurable Inductor KW - Compliant Mechanism Y1 - 2024 SN - 979-8-3503-7349-3 U6 - https://doi.org/10.1109/Metamaterials62190.2024.10703322 SP - X-243 EP - X-245 PB - IEEE CY - Crete ER - TY - CHAP A1 - Seliger, Norbert A1 - Leirich, Nico T1 - Reconfigurable Board-to-Board Interconnect Utilizing Bistable Compliant Ribbon Wires T2 - 14th International Workshop on the Electromagnetic Compatibility of Integrated Circuits (EMC Compo) N2 - We propose a printed circuit board (PCB) interconnection utilizing elastically deformed ribbon wires. The wire deflection is designed as a bistable snapping mechanism, which enables post-assembly tuning of the geometry. Hence, a reconfigurable inductance is obtained, easing impedance matching and supporting signal integrity. Analytical solutions for partial and mutual inductance of buckled wires are developed, which are successfully validated by magneto-quasistatic field simulations and by experiments on a test structure for frequencies ranging from 100kHz to 100MHz. We demonstrate a tunable loop inductance from 25nH to 50nH at 10MHz. KW - compliant mechanism KW - reconfigurable interconnect KW - partial inductance KW - impedance matching Y1 - 2024 SN - 979-8-3315-0462-5 U6 - https://doi.org/10.1109/EMCCompo61192.2024.10742066 SP - 211 EP - 215 PB - IEEE CY - Turin ER - TY - CHAP A1 - Püschel, Maximilian A1 - Seliger, Norbert T1 - Multiple-Frequency Three Coil Inductive Power Transmission with Non-Linear Relay Resonator T2 - Proceedings Southeastcon 2025 N2 - We propose near-field inductive power transfer with three coils in the frequency range of a few MHz. The relay coil is part of a non-linear resonator having a diode connected in parallel to the resonant capacitor. We achieve power transfer at multiple frequencies which can be tuned by the input power level and mutual coupling between the coils. Higher harmonic generation is found dominant at lower input power, whereas subharmonic generation (period doubling and period quadrupling) is observed at high levels. Power transfer at subharmonics reveals robustness against level perturbations due to pronounced amplitude hysteresis effect. A circuit simulation based on standard non-linear diode SPICE models confirms the experimental results which are obtained on a demonstration prototype. KW - wireless power transfer KW - inductive power transmission KW - nonlinear circuits Y1 - 2025 SN - 979-8-3315-0484-7 U6 - https://doi.org/10.1109/SoutheastCon56624.2025.10971670 SN - 1558-058X SP - 34 EP - 39 PB - IEEE ER - TY - CHAP A1 - Yilmaz, Tugce A1 - Mari, Jorge A1 - Asam, Johann A1 - Kirner, Michael A1 - List, Andreas A1 - Fantauzzo, Lucia A1 - Seliger, Norbert T1 - AC Cycling Testing of SiC MOSFET Power Module T2 - Proccedings International exhibition and conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM 2025) N2 - This paper details the development of an accelerated AC cycling test bench for evaluating the aging mechanisms of SiC MOSFET power modules. Contrary to classical HTGS and DGS which only exercise gate source stresses the AC Cycler switched under high voltage and current. Operating for about 235 hours, the system maintained stable thermal conditions thanks to an integrated cooling system. Key precursors of aging, such as increases in threshold voltage and on-state resistance were identified using static characterization curve tracer before and after the test. Gate charge and Vdson were also measured on-line with specially developed gate drivers. KW - power module KW - SiC KW - power cycling testing KW - MOSFET Y1 - 2025 SN - 978-3-8007-6541-6 U6 - https://doi.org/10.30420/566541341 SP - 2562 EP - 2567 PB - VDE VERLAG GMBH CY - Berlin ER - TY - CHAP A1 - Seliger, Norbert T1 - Introducing Environmental Sustainability in an RF and EMC Lab Course Utilizing Reusable, Recyclable and Biodegradable Circuits T2 - Proceedings IEEE educon 2025 N2 - We propose to introduce environmental sustainability in a radio frequency (RF) and electromagnetic compatibility (EMC) laboratory course for an electrical engineering bachelor’s program utilizing reusable, easily recyclable and ecologically harmless (biodegradable) circuits. Our concept is based on the replacement of state-of-the-art printed circuit boards by substrates with mechanically structured adhesive Cu and Zinc films. Furthermore, organic based circuit carriers can be substituted by biodegradable paper substrates. As an example for the RF lab, we discuss the design, simulation and experimental characterization of a microwave low-pass filter with 1.2GHz cut-off frequency. Secondly, for an EMC lab we suggest a prototype for power integrity (PI) studies based on the current imbalance method for reducing common mode radiated emission. As a novel feature during the lab course, the instructor in addition gives a lecture highlighting the electronic waste challenge, which is accompanied by group discussions on sustainability and recycling. As a final lab course task students are asked to disassemble the boards or prepare them for reuse, followed by material sorting and submission to recycling institutions. KW - Microstrip Filters KW - Electromagnetic Compatibility KW - Printed Circuits KW - Electronics Engineering Education KW - Electromagnetic Engineering Education KW - Biodegradable Electronics Y1 - 2025 U6 - https://doi.org/10.1109/EDUCON62633.2025.11016365 PB - IEEE ER - TY - CHAP A1 - Seliger, Norbert A1 - Leirich, Nico T1 - Reconfigurable single-layer air coil inductor with bistable compliant windings T2 - Proceedings EPE 25 N2 - We present an air coil with bistable compliant single layer windings. Due to stable elastic snapping deformation of wire segments, the self-inductance of the air coil can be precisely varied in multiple steps. A numerical and analytical design methodology is proposed and successfully validated by magneto-quasi-static field simulations and experiments on prototypes. KW - Reconfigurable resonant network KW - Passive component KW - Magnetic device KW - Winding topology KW - S- Parameters Y1 - 2025 U6 - https://doi.org/10.34746/epe2025-0012 PB - EPE Association ER -