TY - CHAP A1 - Mayr, Andreas R. A1 - Einig, Jens A1 - Rabold, Andreas T1 - Bauteilkatalog Leichtbau nach DIN 4109 T2 - 10. Europäischer Kongress EBH 2017, Köln, Deutschland KW - Leichtbau KW - Holzbau Y1 - 2017 ER - TY - CHAP A1 - Mecking, Simon A1 - Scheibengraber, Markus A1 - Kruse, Tobias A1 - Schanda, Ulrich A1 - Wellisch, Ulrich T1 - Energiebestimmung an Brettsperrholzbauteilen im Holzmassivbau T2 - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung für Akustik, Kiel, Deutschland N2 - Ein Ziel des DFG-AiF-Clusterforschungsvorhabens Vibroakustik im Planungsprozess für Holzbauten ist die Reduktion des schalltechnischen Planungsaufwandes bei der Holzmassivbauweise. Hierzu soll das Prognoseverfahren der DIN EN 12354 angepasst werden. Darin ist ein vereinfachter SEA-Ansatz zugrunde gelegt, welcher diffuse Körperschallfelder in den Bauteilen sowie deren schwache Kopplung voraussetzt. Tatsächlich trifft die Annahme diffuser Körperschallfelder nur bei Bauteilen mit geringer Ausbreitungsdämpfung zu. Um ein Maß für die Kopplung der Bauteile zu erhalten, wird ein Energieverhältnis aus den Bauteilschnellen gebildet. In der DIN EN ISO 10848-1 wird eine Vorschrift für die Messung der mittleren Bauteilschnelle beschrieben. Daraus wird ein örtlich und zeitlich gemittelter Schnellepegel je Bauteil berechnet, mit dem die Energie des Bauteils bestimmt wird. In diesem Beitrag werden Messergebnisse von Körperschallfeldern an Brettsperrholzelementen im Hinblick auf die Energiebestimmung diskutiert. Bei der statistischen Auswertung werden die Anzahl der Anregepositionen und der Messpositionen auf dem direkt und indirekt angeregten Bauteil analysiert. In einem weiteren Schritt werden die erforderlichen Messpositionen durch eine geeignete Auswahl reduziert und mit den pauschalen, geometrischen Vorgaben der Messvorschrift aus der DIN EN ISO 10848-1 verglichen. Die Erkenntnisse werden zur Bewertung von Messergebnissen und für Empfehlungen an die Durchführung zukünftiger Messungen herangezogen. KW - Holzmassivbau KW - Schallmesstechnik Y1 - 2017 ER - TY - JOUR A1 - Paolini, Alexander A1 - Kollmannsberger, Stefan A1 - Winter, Christoph A1 - Buchschmid, Martin A1 - Müller, Gerhard A1 - Rabold, Andreas A1 - Mecking, Simon A1 - Schanda, Ulrich A1 - Rank, Ernst T1 - A high-order finite element model for vibration analysis of cross-laminated timber assemblies JF - Building Acoustics N2 - The vibration behavior of cross-laminated timber components in the low-frequency range can be predicted with high accuracy by the finite element method. However, the modeling of assembled cross-laminated timber components has been studied only scarcely. The three-dimensional p-version of the finite element method, which is characterized by hierarchic high-order shape functions, is well suited to consider coupling and support conditions. Furthermore, a small number of degrees of freedom can be obtained in case of thin-walled structures using p-elements with high aspect ratios and anisotropic ansatz spaces. In this article, a model for cross-laminated timber assemblies made of volumetric high-order finite elements is presented. Two representative types of connections are investigated, one with an elastomer between the cross-laminated timber components and the other without. The model is validated, and suitable ranges for the stiffness parameters of the finite elements which represent the junctions are identified. KW - cross-laminated timber KW - finite element method Y1 - 2017 UR - https://doi.org/10.1177%2F1351010X17727126 VL - 2017 IS - 3 SP - 135 EP - 158 ET - 24 ER - TY - CHAP A1 - Mecking, S. A1 - Kruse, T. A1 - Schanda, Ulrich T1 - Messung und Berechnung der Körperschallübertragung am Bauteilstoß von Massivholzelementen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - RPRT A1 - Mecking, S. A1 - Winter, C. A1 - Schanda, Ulrich T1 - Teilantrag 3: Parameterentwicklung und Stoßstellenmodellierung. Vibroakustik im Planungsprozess für Holzbauten Modellierung, numerische Simulation, Validierung. Endbericht Phase I. KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - RPRT A1 - Rabold, A. A1 - Schramm, M. T1 - Vibroakustik im Planungsprozess für Holzbauten – Modellierung, numerische Simulation, Validierung – Teilprojekt 4: Bauteilprüfung, FEM-Modellierung und Validierung KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings T2 - Proceedings of Euronoise 2015 KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - Stoßstellendämm-Maße von Massivholzelementen für die SEA basierte Berechnung nach EN 12354 T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Schanda, Ulrich T1 - VibWood. Planungshilfen zur schall- und schwingungstechnischen Beschreibung von Holzdecken bei tiefen Frquenzen T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, A. A1 - Schöpfer, F. T1 - Nachhaltiger Schallschutz gebäudetechnischer Anlagen KW - Holzbau KW - Schallmesstechnik Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Measured transmission functions from structure-borne sound sources in a timber-frame construction T2 - Proceedings of Euronoise 2015, Maastricht, Netherlands N2 - The aim of prEN 15657-2 is to provide engineering methods to estimate the structure-borne sound power input from machinery in situations where the source mobility matches or is lower than the receiver mobility. This situation often affects lightweight constructions such as timber-frame buildings. To estimate the sound pressure level in a room that is adjacent or distant from the room containing the source, the installed structure-borne sound power has to be propagated across at least one junction in the timber-frame construction. However, at present there are no generic, validated calculation models due to the complexity and the large variety of timber-frame constructions. A simplified approach to investigate and compare the structure-borne sound transmission is to treat the framed construction as a black box and only consider one parameter, a transmission function which is the ratio of the sound pressure level in the receiving room to the injected structure-borne sound power level. To get information about the variation of this transmission function in different timber-frame constructions, measurements were made in both the laboratory and the field. Experimental results are presented showing the variation due to different building configurations and the effect of the excitation position on the transmission function. KW - Schallmesstechnik KW - Holzbau Y1 - 2015 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Messungen der Körperschallintensität in einer Holzrahmenbaustruktur T2 - DAGA 2015, 41. Deutsche Jahrestagung für Akustik, Nürnberg, Deutschland. N2 - In den vergangenen Jahren hat der Holzbau auch im mehrgeschossigen Wohnungsbau an Bedeutung gewonnen. Zur Gewährleistung des Schallschutzes zwischen fremden Wohneinheiten sind Werkzeuge zur Berechnung der Schallübertragung in leichten Baustrukturen, wie zum Beispiel Holzrahmenbaukonstruktionen nötig. Solche Prognosemodelle müssen für Ingenieuranwendungen robust sein und auf abstrahierten, einfachen Rechenmodellen beruhen. Um die komplexen bertragungsmechanismen in solchen Rechenmodellen abbilden zu können, ist jedoch zunächst eine detaillierte Kenntnis des Schwingungs- und Körperschallverhaltens dieser Konstruktionen nötig. In diesem Beitrag werden Ergebnisse von Untersuchungen an einer konkreten Rahmenbaukonstruktion vorgestellt. Hierzu wurde im Labor für Schallmesstechnik an der Hochschule Rosenheim ein Leichtbauprüfstand errichtet. Grundlage für ein Prognosemodell könnten Berechnungsmethoden wie die Statistische Energieanalyse (SEA) darstellen. Um deren Anwendbarkeit zu prüfen, wurde die Verteilung der Körperschallenergie in einer Holzrahmenbauwand bei Anregung durch eine Punktquelle untersucht. Dabei wurde die Abnahme der Oberflächenschnelle mit steigendem Abstand zum Anregungspunkt sowie der Energiefluss in der Struktur mithilfe von Körperschallintensitäts-Messverfahren analysiert. KW - Schallmesstechnik KW - Holzbau Y1 - 2015 ER - TY - JOUR A1 - Hoßfeld, M. A1 - Kohrmann, Mathias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Messtechnische Analyse modifizierter Empfangsplattenprüfstände zur Ermittlung der Körperschallleistung haustechnischer Geräte JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik, DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Empfangsplatten KW - haustechnische Geräte KW - Schallmesstechnik Y1 - 2018 ER - TY - JOUR A1 - Mecking, Simon A1 - Châteauviex-Hellwig, Camille A1 - Rabold, Andreas T1 - Dämmstoffe aus nachwachsenden Rohstoffen in der Bauteilprüfung und in Prognosen JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Dämmstoffe KW - Schallmesstechnik Y1 - 2018 ER - TY - CHAP A1 - Rabold, Andreas T1 - Mehrgeschosser in Massivholzbauweise - Schalltechnische Planung und Ausführung T2 - Bauphysikertreffen, Hochschule für Technik Stuttgart, November 2017 KW - Schallmesstechnik Y1 - 2017 SP - 3 EP - 11 ER - TY - CHAP A1 - Rabold, A. A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzdecken Y1 - 2017 ER - TY - CHAP A1 - Schöpfer, F. T1 - Körperschallübertragung im Holzbau. Übertragungsfunktionen T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - JOUR A1 - Schöpfer, F. A1 - Hopkins, C. A1 - Mayr, A. R. A1 - Schanda, Ulrich T1 - Ansätze zur Prognose des Installationspegels im HolzLeichtbau JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau KW - Leichtbau Y1 - 2017 ER - TY - JOUR A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Measurement of transmission functions in lightweight buildings for the prediction of structure-borne sound transmission from machinery JF - Acta Acustica united with Acustica KW - Schallmesstechnik KW - Leichtbau Y1 - 2017 VL - 2017 IS - 103 SP - 451 EP - 464 ER - TY - JOUR A1 - Schöpfer, F. A1 - Hopkins, C. A1 - Mayr, A. A1 - Schanda, Ulrich T1 - Prediction of noise from machinery in timber-frame buildings using transmission functions JF - Proceedings of ICSV24 N2 - To ensure that building regulations are satisfied, the sound pressure level due to machinery has to be predicted at the design stage of a new building. With the increasing popularity of multistory timber dwellings, prediction becomes an important issue for designers and consultants. At present previous project experience is often used when considering the design of wall and floor constructions and the mounting positions for machinery. Simple tools to calculate the sound pressure levels in rooms based on machinery data and construction details are not currently available. The approach involves two stages: firstly the description of the source and secondly the prediction of vibration transmission across the building and sound radiation into the rooms. In this paper a simple empirical model is proposed for the second stage. This approach is based on measured transmission functions that are defined as the average sound pressure level in a receiving room relative to the injected structure-borne sound power. This is a logical extension of approaches to characterize structure-borne sound sources that also use a power based descriptor (e.g. prEN15657:2016-02: Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions) and provides a simple method to estimate the sound pressure level in a room. KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - JOUR A1 - Châteauviex-Hellwig, C. A1 - Mecking, S. A1 - Brummer, B. A1 - Rabold, A. T1 - Anwendung zur SEA basierten Berechnung nach EN 12354 für Massivholzelemente JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Massivholz Y1 - 2016 ER - TY - CHAP A1 - Müller, M. A1 - Schulze, Achim A1 - Isenberg, J. A1 - Hund, B. A1 - Beyer, H.-G. T1 - Influence of the water resistivity on the temperature coeffizients of industrial silicon solar cells and on the expected performance behavior T2 - Proceedings of the 25th EU-PVSEC KW - Photovoltaik KW - Industrial silicon solar cells KW - Performance behavior Y1 - 2010 ER - TY - CHAP A1 - Hinken, D. A1 - Milsted, A. A1 - Bock, R. A1 - Fischer, B. A1 - Bothe, K. A1 - Schütze, M. A1 - Isenberg, J. A1 - Schulze, Achim A1 - Wagner, M. T1 - Determination of the Base-Dopant Concentration of Large-Aria Crystalline Solar Cells T2 - IEEE Trans. Electronic Devices KW - Photovoltaik KW - Crystalline Silicon Solar Cells Y1 - 2010 PB - IEEE Electronic Devices Society CY - USA, North Carolina ER - TY - JOUR A1 - Ackermann, N A1 - Gutewort, V. A1 - Quinque, M. A1 - Kühne, M. A1 - Stein v. Kamienski, E. A1 - Schulze, Achim A1 - Wichtendahl, R. T1 - Final testing: a secure release gate towards module manufacturing JF - Photovoltaics International KW - Photovoltaik KW - Module manufacturing Y1 - 2010 IS - 8 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence and stability of static shells to the Vlasov-Poisson System with a fixed central point mass JF - Mathematical Proceedings of the Cambridge Philosophical Society KW - Photovoltaik KW - Static shells KW - Vlasov-Poisson system Y1 - 2018 IS - 146 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence of axially symmetric solution to the Vlasov-Poisson System depending on Jacobi's Integral JF - Mathematical Proceedings of the Cambridge Philosophical Society KW - Photovoltaik KW - Axielly symmetric solution KW - Vlasov-Poisson system Y1 - 2018 IS - 6/2009 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence and stability of static shells to the Vlasov-Poisson system JF - Analysis KW - Static shells KW - Photovoltaik KW - Vlasov-Poisson system Y1 - 2018 IS - 26 ER - TY - CHAP A1 - Gottschalk, L. A1 - Pflaum, D. A1 - Schneider, S. A1 - Schulze, Achim A1 - Becker, F. A1 - Queck, M. A1 - Hüttl, B. T1 - Evaluation of a compehensive IV- Outdoor Characterization Method for Photovoltaik Modules T2 - Proceedings of the 33rd EU-PVSEC KW - Photovoltaik KW - IV-Outdoor Characterization Y1 - 2017 ER - TY - CHAP A1 - Taubitz, C. A1 - Schulze, Achim A1 - Köntopp, M.B. T1 - Potential-Induced Degradation: An improved unterstanding of mechanicm and infuence factors T2 - Proceedings of the 32nd EU-PVSEC KW - Potental-Induced Degradation KW - Mechanism KW - Influence factors Y1 - 2016 ER - TY - CHAP A1 - Wachter, M. A1 - Gottschalk, L. A1 - Simmler, M. A1 - Schulze, Achim A1 - Becker, F. A1 - Sayala, M. A1 - Hüttl, B. T1 - Short-cicuit current measurement at clear-sky conditions on photovoltaik modules T2 - Proceedings of the 32nd EU-PVSEC KW - Photovoltaik KW - Short circuit current measurement Y1 - 2016 ER - TY - CHAP A1 - Schulze, Achim A1 - Hüttl, B. A1 - Neubert, S. A1 - Hund, B. A1 - Luschitz, J. A1 - Patzlaff, T. T1 - 2D Analysis of thin-film modules T2 - Proceedings of the 25th EU-PVSEC KW - Photovoltaik KW - thin-film modules Y1 - 2010 ER - TY - CHAP A1 - Schanda, Ulrich A1 - Rogge, K. A1 - Meistring, P. A1 - Mühlberger, R. T1 - Prototyp eines Schwingerregers für tieffrequente Schwingungen von Holzdecken T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - CHAP A1 - Buchschmid, M. A1 - Kohrmann, M. A1 - Winter, C. A1 - Müller, G. A1 - Völtl, R. A1 - Schanda, Ulrich T1 - Vibroacoustic Characteristics of Light-Weighted Slabs. Part 2: Measurement-Based Investigation of the Sound Radiation of Suspended Ceilings T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - In this contribution a method for the prediction of the radiated sound out of the velocity field of a vibrating ceiling is presented. The numerical method was validated via measurements on a real structure using a pp-probe. It is based on Integral Transform techniques and can be applied in the postprocessing of a FEM simulation (harmonic analysis) [1]. The method was verified by measurements on the real structure and can be used for parametrical studies. Rounding off the Parts 1 and 2 of this publication nomograms, based on dimensionless parameters, can be developed to predict the sound radiation of light weight slabs. Hereby different sets of geometry as well as different configurations of ceilings can be studied in order to describe the acoustical and dynamical behaviour of wooden ceilings. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Kohrmann, M. A1 - Buchschmid, M. A1 - Greim, A. A1 - Müller, G. A1 - Schanda, Ulrich T1 - Vibroacoustic Characteristics of lightweighted Slabs. Part 1: Aspects of Numerical Modeling, Model Updating and Parametric Studies using the Buckingham π -Theorem T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), AIA-DAGA N2 - In order to set up guidelines for the design of light-weighted ceilings for timber constructions to be used by engineers in practice, investigations based on both measurements and numerical models have been carried out [1, 2, 3]. The setup and the calibration of the numerical model of the structure are outlined briefly. A semi-analytical approach for the prediction of radiated sound is presented, which is based on Integral Transform Methods. The method can be applied in the post processing of a Finite Element computation. Thus as a first step the structure, consisting of a timber slab, a floating floor and a suspended ceiling, is built up in a Finite Element model, where the material properties of wood and the characteristics of the system are considered. The model is parameterized in order to enable computations with varying geometry and material parameters and calibrated with the help of measurements using model updating techniques. The velocity pattern resulting out of the FEM computation is transformed from the spatial into the wavenumber domain and from the time into the frequency domain using Fourier Transform Methods. Applying this velocity pattern as a boundary condition to the Helmholtz Equation, which results out of the Fourier Transform of the wave equation, the wavenumbers, which fulfil the radiation condition, can be selected and the pressure field in the adjacent acoustic fluid can be computed. Due to the properties of the Fourier-Transform the radiated sound power can be calculated efficiently in the transformed domain out of pressure and velocity. In a second part of the contribution the model for the air cushion in the suspended ceiling is discussed, where a FSI-model for the acoustic fluid and the structure is compared against engineering approaches using simplifications concerning mass distribution and transfer impedances between the individual nodes at the interface KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Kohrmann, M. A1 - Buchschmid, M. A1 - Müller, G. A1 - Völtl, R. A1 - Schanda, Ulrich T1 - Numerical models for the prediction of vibroacoustical characteristics of light-weighted ceilings T2 - Internoise 2013 N2 - In order to set up guidelines for the design of light-weighted ceilings for timber constructions to be used by engineers in practice, investigations based on both measurements and numerical models have been carried out within the cooperative research project “VibWood”. In this contribution the setup and the calibration of the numerical model of the structure as well as the prediction of radiated sound are discussed, where a special focus is set on a dimensionless description in order to deduce information for a wide range of system’s specifications. The structure, consisting of a timber slab, a floating floor and a suspended ceiling, is built up in a Finite Element model, where the material properties of wood and the characteristics of the system (e.g.support conditions, contact phenomena dynamic properties of individual parts) are considered. The model is parameterized in order to enable computations with varying geometry and material parameters. After calibrating the FE-model with the help of measurements using model updating techniques dimensionless parameters are defined based on the Buckingham-π- Theorem and computations are carried out in order to specify guidelines for various systems. The radiation of sound is computed in a post processing using Integral Transform Methods. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Mahn, J. A1 - Hopkins, C. A1 - Schanda, Ulrich A1 - Krajci, L. T1 - Competitive wooden floor systems - multi-objective optimization based on acoustics improvement T2 - Internoise 2013 N2 - The objective of this research project is the design of lightweight timber floor systems which have similar thicknesses to those of concrete floors but which perform better than concrete in terms of their environmental life cycle impact and in terms of airborne and impact sound insulation. The availability of superior lightweight acoustic designs will increase the share of timber based floors within the Swiss construction market and will contribute to higher wood utilization in general. A program for systematically developing validated finite element models for the development of lightweight timber floor systems has been proposed. The use of Swiss hardwoods in floor systems will be studied and implemented where possible. Keywords: lightweight timber, sound transmission, impact noise KW - Holzbau KW - Schallmesstechnik Y1 - 2013 ER - TY - JOUR A1 - Rabold, Andreas A1 - Bacher, Stefan A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian T1 - Schallschutz von Holzbalkendecken - Planungshilfen für die Altbausanierung. Teil 1: Direktschalldämmung JF - Bauphysik N2 - Die Altbausanierung nimmt im gesamten Baubereich eine immer bedeutendere Stellung ein. Falls die geplanten Sanierungsmaßnahmen nicht unter den Bestandsschutz von Baudenkmälern fallen, sind die Anforderungen der zum Zeitpunkt der Sanierung baurechtlich eingeführten Normen zu berücksichtigen. Das Bauteil, das bei der Sanierung eine besonders sorgfältige Planung erfordert, ist die Wohnungstrenndecke, die in Altbauten häufig als Holzbalkendecke ausgeführt wurde. Die vorhandenen Planungsgrundlagen für den Schallschutznachweis von Holzbalkendecken sind sowohl in der Normung als auch in der Literatur sehr lückenhaft. Um bessere Planungsdaten zu erhalten, wurde deshalb am ift Rosenheim zunächst ein Forschungsvorhaben durchgeführt, in dem die Luft- und Trittschalldämmung typischer Altbaudecken und deren Verbesserungen durch unterschiedliche Sanierungsmaßnahmen unter Laborverhältnissen ohne Flankenübertragung untersucht wurden [1], [2]. In einem weiteren Forschungsvorhaben [3] wurde in Kooperation mit der Hochschule Rosenheim die Flankenübertragung bei unterschiedlichen Mauerwerkstypen und Deckeneinbindungen ermittelt. Der vorliegende Beitrag beschreibt den Einfluss der Deckenkonstruktion auf die Schalldämmung und die Ermittlung der Planungswerte für die direkte Übertragung über die Decke. In einem noch folgenden zweiten Beitrag werden Planungsdaten für die Flankenübertragung bei Altbaukonstruktionen behandelt. KW - Holzbau KW - Schallmesstechnik Y1 - 2013 IS - 35(4) SP - 280 EP - 285 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian A1 - Rabold, Andreas A1 - Bacher, Stefan T1 - Schallschutz von Holzbalkendecken - Planungshilfen für die Altbausanierung. Teil 2: Flankenschalldämmung JF - Bauphysik N2 - Die Altbausanierung nimmt im gesamten Baubereich eine immer bedeutendere Stellung ein. Falls die geplanten Sanierungsmaßnahmen nicht unter den Bestandsschutz von Baudenkmälern fallen, sind die Anforderungen der zum Zeitpunkt der Sanierung baurechtlich eingeführten Normen zu berücksichtigen. Das Bauteil, das bei der Sanierung eine besonders sorgfältige Planung erfordert, ist die Wohnungstrenndecke, die in Altbauten häufig als Holzbalkendecke ausgeführt wurde. Die vorhandenen Planungsgrundlagen für den Schallschutznachweis von Holzbalkendecken sind sowohl in der Normung als auch in der Literatur sehr lückenhaft. Um bessere Planungsdaten zu erhalten, wurde deshalb zunächst ein Forschungsvorhaben [1] durchgeführt, in dem die Luft- und Trittschalldämmung typischer Altbaudecken und deren Verbesserungen durch unterschiedliche Sanierungsmaßnahmen unter Laborverhältnissen ohne Flankenübertragung untersucht wurden. Die Ergebnisse wurden in einem ersten Beitrag [2] veröffentlicht. Im vorliegenden zweiten Beitrag werden die Ergebnisse eines weiteren Forschungsvorhabens [3] vorgestellt. Der Fokus lag hierbei auf der Ermittlung der Flankenübertragung bei unterschiedlichen Mauerwerkstypen und Deckeneinbindungen. Die Ergebnisse werden als Planungsdaten für die Flankenübertragung bei Altbaukonstruktionen dargestellt und die Anwendung des erarbeiteten Rechenmodells sowie die Validierung anhand von Baumessungen erläutert. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 IS - 35(6) SP - 392 EP - 398 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Schanda, Ulrich A1 - Tröbs, H.-M. A1 - Völtl, R. A1 - Becker, P. T1 - Semi-empirical model of the impact force of a walking person in the time domain and generated impact sound spectra T2 - Internoise 2013 KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, F. T1 - Bewertung und Ertüchtigung von Bestandsdecken in der Sanierung T2 - Forum Holzbau HBS Akustik & Brandschutz KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Tröbs, H.-M. A1 - Schanda, Ulrich A1 - Völtl, R. T1 - Measurement of the radiation efficiency of suspended ceilings at low frequencies using swept sine excitation and high-frequency resolution T2 - Internoise 2013 N2 - It is common for timber ceiling constructions to include a suspended ceilings made of plasterboard. In order to minimize the radiation from impact excitation, especially in the low frequency range below 100 Hz, a detailed analysis of the vibration behaviour was necessary. An experimental modal analysis was carried out and the radiated sound power from the suspended ceiling was measured using a sweep sine excitation by a shaker connected to the top layer of the timber floor construction. Since the experimental modal analysis was conducted using a high frequency resolution and with a non-stationary sound field, it was necessary to check the validity of the intensity measurements by comparing it with 1/3-octave band measurements. The results show very good agreement. By this means the radiation efficiency can be measured simultaneously with an experimental modal analysis of a structure. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Chateauvieux-Hellwig, C. A1 - Schanda, Ulrich A1 - Rabold, A. A1 - Schramm, M. T1 - Messmethodenvergleich für das Stoßstellendämm-Maß von Massivholzelementen. Vibroakustik im Planungsprozess für Holzbauten, Teil 3. T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - CHAP A1 - Mecking, S. A1 - Völtl, R. A1 - Winter, C. A1 - M., Buchschmid A1 - Schanda, Ulrich A1 - Müller, G. T1 - Methodenvergleich zur Bestimmung von Verlustfaktoren von Massivholzelementen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - Die mithilfe der Abklingmethode ermittelten Verlustfaktoren sind bei mehreren Eigenfrequenzen pro Frequenzband zuverlässig. Die Ergebnisse der Resonanzbreitenmethode beziehen sich dagegen auf die Eigenfrequenzen und sind nur bei einer geringen Modenüberlappung zuverlässig. Beide Methoden sind gleichwertig, wenn mehrere Eigenschwingungen im Frequenzband vorhanden sind und die Modenüberlappung gleichzeitig gering ist. Für einseitig überlagerte Resonanzkurven wurde eine einfache Alternative der Resonanzbreitenmethode vorgeschlagen. Die Ergebnisse wurden im Rahmen des gemeinsam von der TU München, der HS Rosenheim und dem ift Rosenheim durchgef¨uhrten DFG-AiF Forschungsvorhabens ”Vibroakustik im Planungsprozess für Holzbauten” erarbeitet. Das IGF-Vorhaben 17328N/1 der Forschungsvereinigung HS Rosenheim wurde über die AiF im Rahmen des Programms zur Förderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert. KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - RPRT A1 - Mecking, S. A1 - Winter, C. A1 - Schanda, Ulrich T1 - Vibroakustik im Planungsprozess für Holzbauten - Parameterentwicklung und Stoßstellenmodellierung. Zwischenbericht. – Rosenheim KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - JOUR A1 - Rabold, Andreas A1 - Schanda, Ulrich A1 - Bacher, Stefan A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian ED - Fouad, Nabil A. T1 - Schallschutz von Holzbalkendecken - Planungshilfen Für die Altbausanierung JF - Bauphysik Kalender 2014 KW - Holzbau KW - Schallmesstechnik Y1 - 2014 VL - 2014 SP - 665 EP - 685 PB - Wiley-VCH Verlag CY - Weinheim ER - TY - CHAP A1 - Schanda, Ulrich T1 - VibWood: Planungshilfen zur schall- und schwingungstechnischen Beschreibung von Holzdecken bei tiefen Frequenzen T2 - Forum Holzbau HBS N2 - Für einen Ergebnistransfer in die Wirtschaft ist geplant, die Berechnungsergebnisse in Form eines interaktiv bedienbaren Programms mit einer grafischen Eingabeoberfläche zur Verfügung zu stellen, da die Zahl der erarbeiteten Nomogramme sehr groß ist. Abbildung 11 zeigt einen Entwurf. Auswählbar für den Anwender sind das Holzdeckensystem in den möglichen Ausbauzuständen eines schwimmenden Estrichs und einer abgehängten Unterdecke sowie die geometrischen Abmessungen der Decke. Weiterhin kann die Anregungsart der Decke variiert werden; es besteht die Möglichkeit zur Wahl zwischen einer Anregung mit dem Normhammerwerk, einem Fußgänger sowie einer benutzereigenen, spektral vorzugebenden Anregungsart. Als Ergebnis wird der abgestrahlte Schallleistungspegel berechnet. Neu aufgenommen wurde die Berechnung des Schwingungsnachweises nach EC5 [6] bzw. der modifizierte Nachweis nach Hamm/Richter [5]. Aus der linearen Frequenzdarstellung des Schallleistungspegels kann die erste Eigenfrequenz für den Gebrauchstauglichkeitsnachweis abgelesen werden, für schalltechnische Belange erfolgt die Darstellung des Schallleistungspegels als Terzspektrum. KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Case study on the vibrational behavior of a timber-frame structure T2 - European Acoustics Association (EAA) (ed.), Forum Acusticum, Krakow, Poland, 2014. KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - CHAP A1 - Winter, C. A1 - Buchschmid, M. A1 - Mecking, S. A1 - Müller, G. A1 - Schanda, Ulrich T1 - Ein hybrider FEM/SEA Ansatz zur Prognose der Schallübertragung an Bauteilstößen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - Es wurden Stoßstellendämm-Maße Kij für verschiedene Bauteilverbindungen von BSPH-Elementen gemessen. Diese zeigen eine gute Übereinstimmung zu anderen Werten aus der Literatur. Bei den Stoßstellen wurde der Einfluss von Elastomerlagern untersucht. Die Ergebnisse zeigen einen deutlichen Einfluss auf die Kij. Eine Berechnung der Kij mithilfe von Kopplungsverlustfaktoren ηij, welche aus einem SEAModell resultieren, zeigen eine ausreichende Übereinstimmung. Weitere Schritte der Modellierung zur Überprüfung dieser Erkenntnisse und zur Abbildung von Elastomeren sind notwendig. Der Beitrag ist Teil des gemeinsam von der TU München, der HS Rosenheim und dem ift Rosenheim durchgeführten DFG-AiF Forschungsvorhabens Vibroakustik im Planungsprozess für Holzbauten. Das IGF-Vorhaben 17328 N/1 der Forschungsvereinigung HS Rosenheim wurde über die AiF im Rahmen des Programms zur Förderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert. KW - Holzbau KW - Schallmesstechnik Y1 - 2014 ER - TY - CHAP A1 - Winter, C. A1 - Buchschmid, M. A1 - Weineisen, C. A1 - Müller, G. A1 - Schanda, Ulrich T1 - Modelling the Sound Transmission across Junctions of Building Components by Energy Influence Coefficients T2 - European Association for Structural Dynamics (ed.), EURODYN N2 - A trend towards lightweight structures, e.g. timber structures, is noticeable in civil engineering, which implies the necessity to predict vibroacoustic characteristics like the transmission of structure-borne sound in order to fulfil requirements regarding serviceability. This contribution focuses on the investigation of junctions of building components e.g. between wall and ceiling. It is part of a joint research project with the aim to catalogue the coupling for a variety of junctions. The resulting database may serve to predict the transmission of structure-borne sound which is typically carried out either using a Finite Element (FEM) approach, suitable for the low frequency range, or by means of energy methods like the Statistical Energy Analysis (SEA) for the high frequency range. Therefore the so-called mid frequency gap emerges, which is examined and attempted to be closed. In this context SEA-averaging techniques are applied in the postprocessing of FEM calculations to obtain an adapted “SEAlike” approach. By varying the subsystems to be excited it is possible to determine Energy Influence Coefficients (EIC), which describe the specific energy content of the different subsystems with respect to the input power. Using this hybrid approach vibroacoustic predictions can be performed also in the mid frequency range. Inverting the EIC-matrix Coupling Loss Factors as well as Damping Loss Factors of the different subsystems can be calculated if the subsystem definition fulfils the SEA-requirements. The application of the method in combination to a classical SEA calculation and to laboratory measurements is presented. KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - CHAP A1 - Völtl, R. A1 - Schanda, Ulrich A1 - Kohrmann, M. A1 - Buchschmid, M. A1 - Müller, G. T1 - Simultaneous operational vibration analysis of different layers of lightweight timber floors T2 - Internoise 2013 N2 - Within the scope of the research project "VibWood", operational vibration analyses of timber floor constructions were carried out. In order to understand the vibration behaviour of and the sound transmission through the layers of the constructions the coupling between them was investigated. The transfer function from the point of excitation to a pattern of receiving positions located on each of the layers of the construction was measured using a swept sine excitation. As a result, the frequency range of decoupling between the base floor and the floating floor and between the base floor and the suspended ceiling could be identified and the individual vibration behavior analyzed. The measurements also included the radiated sound power from the suspended ceiling. There is indication that there is not necessarily a correlation between the eigenmodes of the suspended ceiling and the maxima of the radiated sound power KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER -