TY - THES A1 - Scheffler, Thomas T1 - Werkstoffeinflüsse auf den Spritzgussprozess von hochgefüllten Phenol-Formaldehydharz­ Formmassen N2 - Im Rahmen der vorliegenden Arbeit wurden verschiedene duroplastische Formmassen laboranalytisch hinsichtlich der rheologischen und thermischen Eigenschaften untersucht. Es wurde u.a. gezielt die absolute Materialfeuchte gesteigert, um den Einfluss dieser auf das Fließ­ Härtungsverhalten zu charakterisieren. Anschließend wurden die Materialien auf einer hochinstrumentierten Spritzgussmaschine mit einem Fließspiralenwerkzeug untersucht. Dabei konnte ein direkter Zusammenhang zwischen dem Rückfluss und dem Plastifizierdrehmoment in Abhängigkeit der Materialfeuchte und der Prozessparameter detektiert werden . Des Weiteren wurden über die Differenzdruckmessung im Fließspiralenwerkzeug die scheinbaren Viskositäten über den Fließweg ermittelt. Hierbei konnten unterschiedliche Aufschmelzeffekte über die Fließweglänge in Abhängigke it der duroplastischen Formmasse, der absoluten Materialfeuchte und der Prozessparameter detektiert werden . Durch Schererwärmung konnte die Formmassentemperatur teilweise die Werkzeugtemperatur übersteigen. Hinsichtlich der mechanischen Eigenschaften (Schlagzähigkeit, Biegefestigkeit) konnten keine signifikanten Einflussgrößen detektiert werden. Hinsichtlich des Tg konnten systematischen Unterschiede detektiert und begründet werden. Die beste Möglichkeit zur Ermittlung des Tg lieferte die TMA. Die thermischen Glasübergänge korrelieren mit den in der DSC ermittelten Aushärtegraden , wobei mit steigender Materialfeuchte ein geringer Aushärtegrad detektiert wird. KW - Duroplaste KW - duroplastische Formmassen KW - Phenolharz KW - Feuchtegehalt KW - Rotationsrheometer KW - Hochdruck-DSC KW - Fließspirale KW - Forminnendruckmessung KW - Aushärtegrad Y1 - 2019 UR - http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa2-322005 ER - TY - RPRT A1 - Krommes, Sandra A1 - Jelonnek, Denis T1 - Betreibermodelle für (halb-) öffentliche Ladeinfastruktur N2 - Analyse und Bewertung von Geschäfts- und Betreibermodellen für (halb-) öffentlicher Ladeinfrastruktur aus Sicht kommunaler Akteure. KW - Elektromobiliät KW - öffentliche Ladeinfrastruktur KW - Betreibermodelle KW - Geschäftsmodelle Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-13041 ER - TY - JOUR A1 - Hummel, Sabine A1 - Schemme, Micheal A1 - Karlinger, Peter T1 - GmbH – Glasfaserhybride mit bester Haftung: Variotherme Temperierung für Organobleche JF - Plastverarbeiter N2 - Durch Integrieren der Variothermie können Organobleche wirtschaftlich und technisch verbessert zu Hybridbauteilen verarbeitet werden. Somit steigert sich der Wettbewerbsvorteil gegenüber konventionellen Werkstoffen weiter. An einer Technische Hochschule wird seit mehr als zehn Jahren intensiv an der Thematik der Verbindungstechnologien sowie den Haftungsmechanismen zwischen endlosfaserverstärkten Thermoplasten, den sogenannten Organoblechen, und angespritzten Funktionsstrukturen geforscht. Im Fokus stehen prozesstechnische Einflüsse, die die Verbundhaftung der Hybridleichtbaustrukturen erhöhen. KW - Organoblech KW - Variotherm KW - Verbundhaftung KW - langfaser verstärkte Thermoplaste Y1 - 2019 UR - https://www.plastverarbeiter.de/88054/variotherme-temperierung-fuer-organobleche/ VL - 07/2019 IS - 07 PB - Hüthig GmbH CY - Heidelberg ER - TY - CHAP A1 - Gauß, Daniela A1 - Kohrmann, Mathias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Empfangsplattenprüfstand aus einer Holzwerkstoffplatte T2 - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2016, 42. Deutsche Jahrestagung für Akustik, Aachen, Deutschland. KW - Schallmesstechnik KW - Holzbau Y1 - 2016 ER - TY - RPRT A1 - Schanda, Ulrich T1 - Forschung - Entwicklung - Innovation KW - Schallmesstechnik Y1 - 2018 ER - TY - JOUR A1 - Hopkins, C. A1 - Filippoupolitis, M A1 - Ferreira, N. A1 - Völtl, R. A1 - Schanda, Ulrich A1 - Mahn, J. A1 - Krajci, L. T1 - Vibroacoustic finite element modelling of the low-frequency performance of a solid timber floor formed from dowel-connected joists JF - Proceedings of Inter-Noise 2016 N2 - This paper investigates the prediction of low-frequency impact sound insulation for a solid timber floor formed from dowel-connected joists with Swiss hardwood. A finite element model was developed for the dynamic response of the floor as it is neither homogeneous nor isotropic and has complex connections. With point force excitation, a FEM model for the dynamic response of the floor was validated using experimental modal analysis in the laboratory. Two different FEM models were developed, one using spring connectors and the other using join connectors. Good agreement between FEM and measurements in terms of the Modal Assurance Criterion (MAC) and eigenfrequencies was achieved for the first 14 modes with the spring connector model and for the first 7 modes with the join connector model. However, for the vibroacoustic analysis it was necessary to use the join connector model due to the computational instabilities of the spring model above 100 Hz when it was coupled to the acoustic medium. With mechanical excitation the radiated sound power from the underside of the timber floor was measured with sound intensity in order to calculate the radiation efficiency. Comparison of measurements and FEM showed reasonable agreement between 20Hz and 200Hz KW - Schallmesstechnik KW - Holzbau Y1 - 2016 ER - TY - CHAP A1 - Kohrmann, M. A1 - Buchschmid, M. A1 - Schanda, Ulrich A1 - Müller, G. T1 - A FEM-based planning tool for the vibro-acoustic design of wooden floors at low frequencies T2 - Proceedings of Inter-Noise 2016 N2 - Within the scope of the recently finished cooperate research project "VibWood" at Technical University of Munich and Rosenheim University of Applied Sciences, fully parametrized numerical models for lightweight wooden floor constructions have been developed and calibrated by experimental modal analyses. Based on a vast parametric study including floating floors and suspended ceilings a database of narrowband sound power levels in the frequency range up to 125 Hz for a wide range of floor dimensions has been set up. A procedure will be presented on how to process the numerical data and derive single number values that allow a comparison to the standardized rating of impact sound insulation according to DIN EN ISO 717-2. The derived data is implemented into a graphical user interface (GUI). This GUI is available for free. The database is open for additional geometries and will be enhanced by different constructions in the near future. KW - Schallmesstechnik KW - Holzbau Y1 - 2016 ER - TY - JOUR A1 - Schanda, Ulrich A1 - Konle, E. T1 - Vertraulichkeit und ungestörtes Arbeiten mit Raum-in-Raum-Systemen in offenen Bürolandschaften JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Bürogestaltung Y1 - 2018 ER - TY - JOUR A1 - Kruse, T. A1 - Schanda, Ulrich T1 - Ausbreitungsdämpfung von Körperschall in plattenförmigen Strukturen JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - In der Bauakustik werden bei der Berechnung der schalltechnischen Eigenschaften von Bauteilen ausreichend diffuse Körperschallfelder angenommen. In der Holzmassivbauweise mit modernen Holzwerkstoffen, wie Brettsperrholz, ist die innere Dämpfung der Bauteile im Vergleich zum Mauerwerks- und Betonbau höher, somit die Ausbildung eines Körperschall-Diffusfeldes nicht gesichert. Zum Verständnis der Ausbildung des Körperschallfeldes ist die Messung der Ausbreitungsdämpfung hilfreich. Diese erfolgt über eine Messung des Schnellepegels als Funktion des Abstandes zum Anregungspunkt. Für einen Vergleich mit theoretischen Modellen muss ebenso der Gesamtverlustfaktor bestimmt werden. In diesem Beitrag werden Messergebnisse der Körperschallfelder in unterschiedlichen plattenförmigen Bauteilen und der Vergleich zu theoretischen Ansätzen präsentiert. Zunächst werden homogene Strukturen am Beispiel von Metall- und Gipskartonplatten GKB betrachtet. Diese Messungen erfolgten an frei hängenden Elementen in unterschiedlichen Dimensionen bei punktförmiger Anregung. Im Anschluss wird ein Brettsperrholz-Bauteil BSH als orthotropes Material bei Punkt- sowie bei Linienanregung betrachtet. KW - Schallmesstechnik Y1 - 2016 ER - TY - JOUR A1 - Mayr, Andreas R. A1 - Gibbs, Barry T1 - Approximate method for obtaining source quantities for calculation of structure-borne sound transmission into lightweight buildings JF - Applied Acoustics N2 - An approximate approach is described, for obtaining the source quantities required for the calculation of structure-borne sound power from machines into supporting lightweight building elements. The approach is in two stages, which are based on existing international Standards for measurement. The first stage involves direct measurement of the source free velocity at each contact, to give the sum of the square velocities. The second stage is based on the reception plate method and yields the single equivalent blocked force, which approximates the sum of the square blocked forces. The applicability of the source data obtained has been investigated in a case study of a fan unit on a timber joist floor. The approach contains several significant simplifying assumptions and the uncertainties associated with them are considered. For the case considered, the power transmitted into the floor is estimated by the approximate method to within 5 dB of the true value, on average. KW - Schallmesstechnik KW - Leichtbau Y1 - 2016 VL - 2016 IS - 110 SP - 81 EP - 90 ER - TY - JOUR A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Entwicklung eines SEA-Modells für eine Holzrahmenbauwand mit N+F Beplankungslagen JF - DAGA 2016, 42. Deutsche Jahrestagung für Akustik, Aachen, Deutschland N2 - Holzrahmenbaukonstruktionen stellen in Bezug auf ihre vibro-akustischen Eigenschaften komplexe Systeme dar. Eine Prognose des bei der Körperschallanregung durch haustechnische Anlagen erzeugten Schalldruckpegels in angrenzenden Räumen ist b.d. nicht möglich und bedarf entsprechender Modelle. In diesem Beitrag wird die Modellierung einer im Labor aufgebauten Holzrahmenbaukonstruktion unter Verwendung der Statistischen Energieanalyse (SEA) vorgestellt. Die Besonderheit der vorliegenden Konstruktion besteht in ihrem sehr einfachen Aufbau mit beidseitig einschaliger Beplankung durch Spanplatten mit Nut- und Federverbindung (N+F), sowie horizontalen und vertikalen Plattenstößen. In dieser Form weist die Konstruktion einen sehr inhomogenen Aufbau auf. Die Ergebnisse experimenteller Untersuchungen zeigten, dass an den N+F Verbindungen eine signifikante Abnahme der Schwingungsenergie vorliegt. Um diese Erkenntnisse im SEA-Modell zu berücksichtigen, wurden gemessene Kopplungsverluste für die Nut- und Federverbindung verwendet, wohingegen alle weiteren im System benötigten Verlustfaktoren aus Literaturwerten prognostiziert wurden. Ein Vergleich der Ergebnisse aus der SEA-Modellierung mit Messdaten der Schwingschnelle auf den Beplankungslagen sowie der Schalldruckpegel in den Wandhohlräumen wird vorgestellt. KW - Schallmesstechnik KW - Holzbau Y1 - 2016 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Modelling structure-borne sound transmission across a timber-frame wall using SEA. T2 - Proceedings of InterNoise 2016, Hamburg, Germany N2 - This paper concerns the modelling of sound transmission across a timber-frame wall under mechanical excitation by a point force using Statistical Energy Analysis (SEA). The aim is to develop and experimentally validate a model that would be relevant to machinery such as a heating device or a ventilation system that are often connected to such walls. The prediction is compared against measurements on a wall that forms part of a lightweight test-rig in the Laboratory for Sound Measurement (LaSM) at the University of Applied Sciences Rosenheim. A basic timber frame was built with a single layer of tongue and grooved chipboard on each side of the wall. With this configuration the structure represented a lightweight construction with horizontal junctions in addition to the vertical junctions that are more typical with lightweight constructions formed from plasterboard. A series of SEA models were developed with an increasing degree of complexity regarding the partitioning of the structure into subsystems. Additional experimental work was carried out to determine coupling loss factors across the chipboard joints which were then incorporated in the model. The SEA predictions are compared with measured velocities on both leaves and sound pressure levels in the cavities. KW - structure-borne sound transmission KW - timber-frame wall Y1 - 2016 ER - TY - JOUR A1 - Rabold, Andreas A1 - Châteauviex-Hellwig, Camille A1 - Mecking, Simon T1 - Nachweis von Holzdecken nach DIN 4109 - Möglichkeiten und Grenzen JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Schallmesstechnik KW - Holzdecken Y1 - 2018 ER - TY - JOUR A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Übertragungsfunktionen im Holzbau JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Schallmesstechnik KW - Übertragungsfunktionen im Holzbau Y1 - 2018 ER - TY - RPRT A1 - Châteauviex-Hellwig, Camille A1 - Rabold, Andreas A1 - Schramm, M. T1 - Teilprojekt 4: Bauteilprüfung, FEM Modellierung und Validierung. T2 - ift-Forschungsbericht (Hsg.): Vibroakustik im Planungsprozess für Holzbauten - Modellierung, numerische Simulation, Validierung KW - FEM Modellierung KW - Vibroakustik KW - Holzbauten Y1 - 2017 VL - 2017 ER - TY - JOUR A1 - Haut, Sandra A1 - Mecking, Simon A1 - Schanda, Ulrich T1 - Experimentelle Bestimmung des Abstrahlgrades und des inneren Verlustfaktors orthotroper Platten JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung für Akustik, Kiel, Deutschland KW - orthotrope Platten KW - Schallmesstechnik Y1 - 2017 ER - TY - JOUR A1 - Homb, Anders A1 - Guigou-Carter, Catherine A1 - Rabold, Andreas T1 - Impact sound insulation of cross-laminated timber/massive wood floor constructions. Collection of laboratory measurements and result evaluation JF - Building Acoustics N2 - Wooden building systems, including cross-laminated timber elements, are becoming more common. The last few years have seen new developments and documentation of innovative types of cross-laminated timber floor assemblies. Regarding impact sound associated to walking persons, running or jumping children, such floor assemblies can be regarded as a weak part. So far, there are no reliable standardized calculation models available, for prediction of impact sound in the entire frequency range. Therefore the design is always based upon previous experiences and available measurements. This article presents the results of a number of well controlled sound insulation measurements of cross-laminated timber/massive wood floor constructions conducted in laboratories. The collection of data and results analysis highlight some basic phenomena. For instance, how structural differences related to the grouping of the constructions change the frequency distribution of the impact sound level and the single number quantities. Another significant result is the influence of the dynamic stiffness of the resilient interlayer of floating floor systems and the mass per unit area of the floors. Based on this analysis, the aim is to identify similarities and carry out simplifications. The data will be further processed and used in the development of prediction models and optimization process of cross-laminated timber floor assemblies. KW - Schallmesstechnik KW - Impact sound insulation Y1 - 2017 UR - https://doi.org/10.1177%2F1351010X16682966 VL - 2017 IS - 24/1 SP - 35 EP - 52 ER - TY - CHAP A1 - Mayr, Andreas R. A1 - Einig, Jens A1 - Rabold, Andreas T1 - Bauteilkatalog Leichtbau nach DIN 4109 T2 - 10. Europäischer Kongress EBH 2017, Köln, Deutschland KW - Leichtbau KW - Holzbau Y1 - 2017 ER - TY - CHAP A1 - Mecking, Simon A1 - Scheibengraber, Markus A1 - Kruse, Tobias A1 - Schanda, Ulrich A1 - Wellisch, Ulrich T1 - Energiebestimmung an Brettsperrholzbauteilen im Holzmassivbau T2 - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung für Akustik, Kiel, Deutschland N2 - Ein Ziel des DFG-AiF-Clusterforschungsvorhabens Vibroakustik im Planungsprozess für Holzbauten ist die Reduktion des schalltechnischen Planungsaufwandes bei der Holzmassivbauweise. Hierzu soll das Prognoseverfahren der DIN EN 12354 angepasst werden. Darin ist ein vereinfachter SEA-Ansatz zugrunde gelegt, welcher diffuse Körperschallfelder in den Bauteilen sowie deren schwache Kopplung voraussetzt. Tatsächlich trifft die Annahme diffuser Körperschallfelder nur bei Bauteilen mit geringer Ausbreitungsdämpfung zu. Um ein Maß für die Kopplung der Bauteile zu erhalten, wird ein Energieverhältnis aus den Bauteilschnellen gebildet. In der DIN EN ISO 10848-1 wird eine Vorschrift für die Messung der mittleren Bauteilschnelle beschrieben. Daraus wird ein örtlich und zeitlich gemittelter Schnellepegel je Bauteil berechnet, mit dem die Energie des Bauteils bestimmt wird. In diesem Beitrag werden Messergebnisse von Körperschallfeldern an Brettsperrholzelementen im Hinblick auf die Energiebestimmung diskutiert. Bei der statistischen Auswertung werden die Anzahl der Anregepositionen und der Messpositionen auf dem direkt und indirekt angeregten Bauteil analysiert. In einem weiteren Schritt werden die erforderlichen Messpositionen durch eine geeignete Auswahl reduziert und mit den pauschalen, geometrischen Vorgaben der Messvorschrift aus der DIN EN ISO 10848-1 verglichen. Die Erkenntnisse werden zur Bewertung von Messergebnissen und für Empfehlungen an die Durchführung zukünftiger Messungen herangezogen. KW - Holzmassivbau KW - Schallmesstechnik Y1 - 2017 ER - TY - JOUR A1 - Paolini, Alexander A1 - Kollmannsberger, Stefan A1 - Winter, Christoph A1 - Buchschmid, Martin A1 - Müller, Gerhard A1 - Rabold, Andreas A1 - Mecking, Simon A1 - Schanda, Ulrich A1 - Rank, Ernst T1 - A high-order finite element model for vibration analysis of cross-laminated timber assemblies JF - Building Acoustics N2 - The vibration behavior of cross-laminated timber components in the low-frequency range can be predicted with high accuracy by the finite element method. However, the modeling of assembled cross-laminated timber components has been studied only scarcely. The three-dimensional p-version of the finite element method, which is characterized by hierarchic high-order shape functions, is well suited to consider coupling and support conditions. Furthermore, a small number of degrees of freedom can be obtained in case of thin-walled structures using p-elements with high aspect ratios and anisotropic ansatz spaces. In this article, a model for cross-laminated timber assemblies made of volumetric high-order finite elements is presented. Two representative types of connections are investigated, one with an elastomer between the cross-laminated timber components and the other without. The model is validated, and suitable ranges for the stiffness parameters of the finite elements which represent the junctions are identified. KW - cross-laminated timber KW - finite element method Y1 - 2017 UR - https://doi.org/10.1177%2F1351010X17727126 VL - 2017 IS - 3 SP - 135 EP - 158 ET - 24 ER - TY - CHAP A1 - Mecking, S. A1 - Kruse, T. A1 - Schanda, Ulrich T1 - Messung und Berechnung der Körperschallübertragung am Bauteilstoß von Massivholzelementen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - RPRT A1 - Mecking, S. A1 - Winter, C. A1 - Schanda, Ulrich T1 - Teilantrag 3: Parameterentwicklung und Stoßstellenmodellierung. Vibroakustik im Planungsprozess für Holzbauten Modellierung, numerische Simulation, Validierung. Endbericht Phase I. KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - RPRT A1 - Rabold, A. A1 - Schramm, M. T1 - Vibroakustik im Planungsprozess für Holzbauten – Modellierung, numerische Simulation, Validierung – Teilprojekt 4: Bauteilprüfung, FEM-Modellierung und Validierung KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings T2 - Proceedings of Euronoise 2015 KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - Stoßstellendämm-Maße von Massivholzelementen für die SEA basierte Berechnung nach EN 12354 T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Schanda, Ulrich T1 - VibWood. Planungshilfen zur schall- und schwingungstechnischen Beschreibung von Holzdecken bei tiefen Frquenzen T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, A. A1 - Schöpfer, F. T1 - Nachhaltiger Schallschutz gebäudetechnischer Anlagen KW - Holzbau KW - Schallmesstechnik Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Measured transmission functions from structure-borne sound sources in a timber-frame construction T2 - Proceedings of Euronoise 2015, Maastricht, Netherlands N2 - The aim of prEN 15657-2 is to provide engineering methods to estimate the structure-borne sound power input from machinery in situations where the source mobility matches or is lower than the receiver mobility. This situation often affects lightweight constructions such as timber-frame buildings. To estimate the sound pressure level in a room that is adjacent or distant from the room containing the source, the installed structure-borne sound power has to be propagated across at least one junction in the timber-frame construction. However, at present there are no generic, validated calculation models due to the complexity and the large variety of timber-frame constructions. A simplified approach to investigate and compare the structure-borne sound transmission is to treat the framed construction as a black box and only consider one parameter, a transmission function which is the ratio of the sound pressure level in the receiving room to the injected structure-borne sound power level. To get information about the variation of this transmission function in different timber-frame constructions, measurements were made in both the laboratory and the field. Experimental results are presented showing the variation due to different building configurations and the effect of the excitation position on the transmission function. KW - Schallmesstechnik KW - Holzbau Y1 - 2015 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Messungen der Körperschallintensität in einer Holzrahmenbaustruktur T2 - DAGA 2015, 41. Deutsche Jahrestagung für Akustik, Nürnberg, Deutschland. N2 - In den vergangenen Jahren hat der Holzbau auch im mehrgeschossigen Wohnungsbau an Bedeutung gewonnen. Zur Gewährleistung des Schallschutzes zwischen fremden Wohneinheiten sind Werkzeuge zur Berechnung der Schallübertragung in leichten Baustrukturen, wie zum Beispiel Holzrahmenbaukonstruktionen nötig. Solche Prognosemodelle müssen für Ingenieuranwendungen robust sein und auf abstrahierten, einfachen Rechenmodellen beruhen. Um die komplexen bertragungsmechanismen in solchen Rechenmodellen abbilden zu können, ist jedoch zunächst eine detaillierte Kenntnis des Schwingungs- und Körperschallverhaltens dieser Konstruktionen nötig. In diesem Beitrag werden Ergebnisse von Untersuchungen an einer konkreten Rahmenbaukonstruktion vorgestellt. Hierzu wurde im Labor für Schallmesstechnik an der Hochschule Rosenheim ein Leichtbauprüfstand errichtet. Grundlage für ein Prognosemodell könnten Berechnungsmethoden wie die Statistische Energieanalyse (SEA) darstellen. Um deren Anwendbarkeit zu prüfen, wurde die Verteilung der Körperschallenergie in einer Holzrahmenbauwand bei Anregung durch eine Punktquelle untersucht. Dabei wurde die Abnahme der Oberflächenschnelle mit steigendem Abstand zum Anregungspunkt sowie der Energiefluss in der Struktur mithilfe von Körperschallintensitäts-Messverfahren analysiert. KW - Schallmesstechnik KW - Holzbau Y1 - 2015 ER - TY - JOUR A1 - Hoßfeld, M. A1 - Kohrmann, Mathias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Messtechnische Analyse modifizierter Empfangsplattenprüfstände zur Ermittlung der Körperschallleistung haustechnischer Geräte JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik, DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Empfangsplatten KW - haustechnische Geräte KW - Schallmesstechnik Y1 - 2018 ER - TY - JOUR A1 - Mecking, Simon A1 - Châteauviex-Hellwig, Camille A1 - Rabold, Andreas T1 - Dämmstoffe aus nachwachsenden Rohstoffen in der Bauteilprüfung und in Prognosen JF - Deutsche Gesellschaft für Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2018, 44. Deutsche Jahrestagung für Akustik, München, Deutschland KW - Dämmstoffe KW - Schallmesstechnik Y1 - 2018 ER - TY - CHAP A1 - Rabold, Andreas T1 - Mehrgeschosser in Massivholzbauweise - Schalltechnische Planung und Ausführung T2 - Bauphysikertreffen, Hochschule für Technik Stuttgart, November 2017 KW - Schallmesstechnik Y1 - 2017 SP - 3 EP - 11 ER - TY - CHAP A1 - Rabold, A. A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzdecken Y1 - 2017 ER - TY - CHAP A1 - Schöpfer, F. T1 - Körperschallübertragung im Holzbau. Übertragungsfunktionen T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - JOUR A1 - Schöpfer, F. A1 - Hopkins, C. A1 - Mayr, A. R. A1 - Schanda, Ulrich T1 - Ansätze zur Prognose des Installationspegels im HolzLeichtbau JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau KW - Leichtbau Y1 - 2017 ER - TY - JOUR A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Measurement of transmission functions in lightweight buildings for the prediction of structure-borne sound transmission from machinery JF - Acta Acustica united with Acustica KW - Schallmesstechnik KW - Leichtbau Y1 - 2017 VL - 2017 IS - 103 SP - 451 EP - 464 ER - TY - JOUR A1 - Schöpfer, F. A1 - Hopkins, C. A1 - Mayr, A. A1 - Schanda, Ulrich T1 - Prediction of noise from machinery in timber-frame buildings using transmission functions JF - Proceedings of ICSV24 N2 - To ensure that building regulations are satisfied, the sound pressure level due to machinery has to be predicted at the design stage of a new building. With the increasing popularity of multistory timber dwellings, prediction becomes an important issue for designers and consultants. At present previous project experience is often used when considering the design of wall and floor constructions and the mounting positions for machinery. Simple tools to calculate the sound pressure levels in rooms based on machinery data and construction details are not currently available. The approach involves two stages: firstly the description of the source and secondly the prediction of vibration transmission across the building and sound radiation into the rooms. In this paper a simple empirical model is proposed for the second stage. This approach is based on measured transmission functions that are defined as the average sound pressure level in a receiving room relative to the injected structure-borne sound power. This is a logical extension of approaches to characterize structure-borne sound sources that also use a power based descriptor (e.g. prEN15657:2016-02: Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions) and provides a simple method to estimate the sound pressure level in a room. KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - JOUR A1 - Châteauviex-Hellwig, C. A1 - Mecking, S. A1 - Brummer, B. A1 - Rabold, A. T1 - Anwendung zur SEA basierten Berechnung nach EN 12354 für Massivholzelemente JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Massivholz Y1 - 2016 ER - TY - CHAP A1 - Müller, M. A1 - Schulze, Achim A1 - Isenberg, J. A1 - Hund, B. A1 - Beyer, H.-G. T1 - Influence of the water resistivity on the temperature coeffizients of industrial silicon solar cells and on the expected performance behavior T2 - Proceedings of the 25th EU-PVSEC KW - Photovoltaik KW - Industrial silicon solar cells KW - Performance behavior Y1 - 2010 ER - TY - CHAP A1 - Hinken, D. A1 - Milsted, A. A1 - Bock, R. A1 - Fischer, B. A1 - Bothe, K. A1 - Schütze, M. A1 - Isenberg, J. A1 - Schulze, Achim A1 - Wagner, M. T1 - Determination of the Base-Dopant Concentration of Large-Aria Crystalline Solar Cells T2 - IEEE Trans. Electronic Devices KW - Photovoltaik KW - Crystalline Silicon Solar Cells Y1 - 2010 PB - IEEE Electronic Devices Society CY - USA, North Carolina ER - TY - JOUR A1 - Ackermann, N A1 - Gutewort, V. A1 - Quinque, M. A1 - Kühne, M. A1 - Stein v. Kamienski, E. A1 - Schulze, Achim A1 - Wichtendahl, R. T1 - Final testing: a secure release gate towards module manufacturing JF - Photovoltaics International KW - Photovoltaik KW - Module manufacturing Y1 - 2010 IS - 8 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence and stability of static shells to the Vlasov-Poisson System with a fixed central point mass JF - Mathematical Proceedings of the Cambridge Philosophical Society KW - Photovoltaik KW - Static shells KW - Vlasov-Poisson system Y1 - 2018 IS - 146 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence of axially symmetric solution to the Vlasov-Poisson System depending on Jacobi's Integral JF - Mathematical Proceedings of the Cambridge Philosophical Society KW - Photovoltaik KW - Axielly symmetric solution KW - Vlasov-Poisson system Y1 - 2018 IS - 6/2009 ER - TY - JOUR A1 - Schulze, Achim T1 - Existence and stability of static shells to the Vlasov-Poisson system JF - Analysis KW - Static shells KW - Photovoltaik KW - Vlasov-Poisson system Y1 - 2018 IS - 26 ER - TY - CHAP A1 - Gottschalk, L. A1 - Pflaum, D. A1 - Schneider, S. A1 - Schulze, Achim A1 - Becker, F. A1 - Queck, M. A1 - Hüttl, B. T1 - Evaluation of a compehensive IV- Outdoor Characterization Method for Photovoltaik Modules T2 - Proceedings of the 33rd EU-PVSEC KW - Photovoltaik KW - IV-Outdoor Characterization Y1 - 2017 ER - TY - CHAP A1 - Taubitz, C. A1 - Schulze, Achim A1 - Köntopp, M.B. T1 - Potential-Induced Degradation: An improved unterstanding of mechanicm and infuence factors T2 - Proceedings of the 32nd EU-PVSEC KW - Potental-Induced Degradation KW - Mechanism KW - Influence factors Y1 - 2016 ER - TY - CHAP A1 - Wachter, M. A1 - Gottschalk, L. A1 - Simmler, M. A1 - Schulze, Achim A1 - Becker, F. A1 - Sayala, M. A1 - Hüttl, B. T1 - Short-cicuit current measurement at clear-sky conditions on photovoltaik modules T2 - Proceedings of the 32nd EU-PVSEC KW - Photovoltaik KW - Short circuit current measurement Y1 - 2016 ER - TY - CHAP A1 - Schulze, Achim A1 - Hüttl, B. A1 - Neubert, S. A1 - Hund, B. A1 - Luschitz, J. A1 - Patzlaff, T. T1 - 2D Analysis of thin-film modules T2 - Proceedings of the 25th EU-PVSEC KW - Photovoltaik KW - thin-film modules Y1 - 2010 ER - TY - CHAP A1 - Schanda, Ulrich A1 - Rogge, K. A1 - Meistring, P. A1 - Mühlberger, R. T1 - Prototyp eines Schwingerregers für tieffrequente Schwingungen von Holzdecken T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - CHAP A1 - Buchschmid, M. A1 - Kohrmann, M. A1 - Winter, C. A1 - Müller, G. A1 - Völtl, R. A1 - Schanda, Ulrich T1 - Vibroacoustic Characteristics of Light-Weighted Slabs. Part 2: Measurement-Based Investigation of the Sound Radiation of Suspended Ceilings T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - In this contribution a method for the prediction of the radiated sound out of the velocity field of a vibrating ceiling is presented. The numerical method was validated via measurements on a real structure using a pp-probe. It is based on Integral Transform techniques and can be applied in the postprocessing of a FEM simulation (harmonic analysis) [1]. The method was verified by measurements on the real structure and can be used for parametrical studies. Rounding off the Parts 1 and 2 of this publication nomograms, based on dimensionless parameters, can be developed to predict the sound radiation of light weight slabs. Hereby different sets of geometry as well as different configurations of ceilings can be studied in order to describe the acoustical and dynamical behaviour of wooden ceilings. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER -