TY - RPRT A1 - Sandor, V. A1 - Schalk, D. A1 - Sussmann, M. A1 - Wellisch, Ulrich T1 - Statistische Datenanalyse und Modellierung - Machine Learning in der Versicherung, Risikomodelle auf dem Prüfstand. Forschungsbericht 2016 Hochschule Rosenheim KW - Statistische Datenanalyse KW - Risikomodellierung KW - Machine Learning Y1 - 2016 ER - TY - CHAP A1 - Rabold, Andreas A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - HolzBauSpezial Bauphysik 2017, Bad Wörishofen KW - Holzbalkendecken KW - DIN 4109 Y1 - 2018 ER - TY - CHAP A1 - Rabold, Andreas T1 - Mehrgeschosser in Massivholzbauweise – Schalltechnische Planung und Ausführung T2 - Bauphysik Forum 2017, 8. INTERNATIONALER HOLZ[BAU]PHYSIK KONGRESS, Bad Ischl N2 - Zum Schutz gegen unzumutbare Belästigungen aus fremden Wohnbereichen werden in der DIN 4109 Anforderungen an die Schalldämmung der Trennbauteile zwischen den Wohnbereichen gestellt. Diese Anforderungen können von heute üblichen Konstruktionen bei fehlerfreier Ausführung sowohl in Holzbauweise als auch in Massivbauweise problemlos eingehalten werden. Dies spiegelt sich auch bei Güteprüfungen der Luft -und Trittschall-dämmung am Bau wider. Bei Umfragen unter den Bewohnern von Mehrfamilienhäusern wird jedoch häufig die Trittschallübertragung der Trenndecke als störendeGeräuschquelle genannt. Die Beurteilung der Trittschallübertragung von Trenndecken anhand des bewerteten Norm - Trittschallpegels im Bau als alleinige Bewertungsgröße scheint somit unabhängig von der Bauweise nich t ausreichend zu sein, um dem subjektiven Empfinden des Bewohners gerecht zu werden. Als Voraussetzung für die Auswahl geeigneter Deckenkonstruktionen immehrgeschossigen Holzbau wird deshalb in Abschnitt 2 zunächst ein zutreffendes Beurteilungskriterium für die Trittschallübertragung gewählt und Wege zur konstruktiven Umsetzung aufgezeigt. Bei der Luftschalldämmung von Trennwänden und Trenndecken in der Geschossbauweise spielt der Anteil der Flankenübertragung eine wesentliche Rolle, wie die Beispiele ausgeführter Objekte in Abschnitt 3 zeigen. Um diese Anteile der Flankenübertragung genauer berücksichtigen zu können und eine wirtschaftlichere Planung zu ermöglichen wird ein Forschungsprojekt durchgeführt, auf dessen Inhalte in Abschnitt 4 vorgestellt werden. KW - Massivholzbau Y1 - 2018 ER - TY - JOUR A1 - Mayr, Andreas R. A1 - Nightingale, T.R.T. T1 - On transmission of structure borne power from wood studs to gypsum board mounted on resilient metal channels – Part 1: Force and moment transmission JF - Canadian Acoustics N2 - The assumptions relating to power flow as a function of position and number of fasteners between the gypsum board and RC's was examined. It was observed that studs had both a rotational and translation motion but the translation displacement coupled more strongly than rotation. It was also observed that if the rotation velocity was less than or equal to the translation velocity, then structure borne transmission due to the rotation component could be ignored for frequencies below 2500 Hz. The results show that there is little effect associated with either the location or the number of fasteners attaching the gypsum board to the RC's about 315 Hz. KW - Approximation Theory KW - Frequencies KW - Functions KW - Power transmission KW - Radiation Y1 - 2004 IS - Vol. 32/3 ER - TY - JOUR A1 - Nightingale, T.R.T. A1 - Mayr, Andreas R. T1 - On transmission of structure borne power from wood studs to gypsum board mounted on resilient metal channels – Part 2: Some simplifications for modelling JF - Canadian Acoustics N2 - The simplifications used while creating a model for structure borne transmission from a wood stud to a gypsum board mounted on RCs are discussed. Above 400 Hz power transmission is determined by stud translation, is propotional to the number of RCs, and is independent of number and location of fasteners between gypsum board and RCs. In this frequency range it is possible to use the mobility approach if RCs can be approximated by a series of idealised springs located at points of intersection between stud and RCs. The dynamic stiffness of each spring is equal to that of the RC at a stud. KW - Aspect ratio KW - Attenuation KW - Boundary conditions KW - Electric excitation KW - Finite element method Y1 - 2004 IS - Vol. 32/3 ER - TY - JOUR A1 - Mayr, Andreas R. A1 - Nightingale, T.R.T. A1 - Fischer, Heinz Martin T1 - Metall macht leise. JF - Journal TrockenBau Akustik KW - Trockenbau KW - Metalldämmung KW - Schallschutz Y1 - 2006 IS - 3/2006 ER - TY - CHAP A1 - Mayr, Andreas R. A1 - Nightingale, T.R.T. A1 - Fischer, Heinz Martin T1 - Verbesserung der Schalldämmung von Holzständerwänden bei punktförmiger Anregung durch Verwendung von Metall-Feder-Profilen. T2 - DAGA 2005, Deutsche Jahrestagung für Akustik, München. KW - Metall-Feder-Profile KW - Holzständerwände KW - Schallschutz Y1 - 2005 ER - TY - CHAP A1 - Mayr, Andreas R. A1 - Drechsler, A. A1 - Fischer, Heinz Martin T1 - Schalltechnische Optimierung einer Bolzentreppe. T2 - DAGA 2006, Deutsche Jahrestagung für Akustik, Braunschweig. KW - Bolzentreppe KW - Schallschutz KW - Trittschalldämmung Y1 - 2006 ER - TY - CHAP A1 - Mayr, Andreas R. A1 - Gibbs, Barry A1 - Fischer, Heinz Martin T1 - Consideration of vibration sources in buildings on a power basis T2 - 13th International Congress on Sound and Vibration, ICSV13, Vienna, Austria, July 2006. KW - Vibration sources KW - Sound measurement Y1 - 2006 ER - TY - RPRT A1 - Bischof, Wolfgang T1 - On the Stability of Polling-Systems for General Arrival Processes T2 - Report No. 384 des Instituts für Mathematik, Universität Augsburg KW - Polling Systems KW - Arrival Processes KW - Server modelling Y1 - 1998 ER - TY - RPRT A1 - Bischof, Wolfgang T1 - M/G/1-queues with Setup Times and Vacations under Various Service Disciplines T2 - Report No. 417 des Instituts für Mathematik, Universität Augsburg KW - M/G/1-queues KW - Setup times Y1 - 1999 VL - 1999 ER -