TY - CHAP A1 - Versen, Martin A1 - Bernhardt, A1 - Heigl, M. A1 - Viehhauser, P. A1 - Zentgraf, P. T1 - System for real-time data acquisition and processing on a hail-fighter aeroplane T2 - Proceedings of the 5th European DSP Education and Research Conference N2 - The System HAILsens implements a device for Real-Time sensor data processing, running on a Texas Instruments Concerto M3 core. An I2C interface is used for sensor communications. Ethernet with UDP on a custom developed three layered frame organisation of sensor data serves as a link to the main system on board of an aeroplane. For backing up the acquired data, all frames are locally stored on an SD Card. To have the possibility of easily checking the current system status, an LCD module and a push-button provide a minimal user interface. KW - sensors KW - aircraft instrumentation KW - data acquisition KW - liquid crystal displays Y1 - 2018 ER - TY - CHAP A1 - Zentgraf, Peter A1 - Berge, S. A1 - Chasset, C. A1 - Filippi, H. A1 - Gottzein, E. A1 - Gutiérrez-Cañas, I. A1 - Hartrampf, M. A1 - Krauss, P. A. A1 - Kuehl, C. A1 - Lübke- Ossenbeck, B. A1 - Mittnacht, M. A1 - Montenbruck, O. A1 - Müller, C. A1 - Rueda Boldo, P. A1 - Truffi, A. ED - American Astronautical Society, T1 - PREPARING THE GPS-EXPERIMENT FOR THE SMALL GEO MISSION T2 - 33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE N2 - This paper deals with the preparation of the Small GEO mission and the accommodation of a GPS receiver as an experiment. The expected benefits of using the GPS receiver for Small GEO are explained. The feasibility of using GPS for position determination is investigated by simulation using a MosaicGNSS receiver, which was stimulated by a Spirent RF signal generator. A procedure, how to evaluate flight data on ground is outlined. Success criteria of the experiment and the minimal size of the downlink stream required and reserved for the receiver TM are presented. KW - GPS KW - geosynchronous mission KW - Small GEO telecommunications satellite Y1 - 2018 ER - TY - GEN A1 - Böttcher, B. A1 - Zentgraf, P. A1 - Stark, R. A1 - Albrecht, T. T1 - Entwicklung von Modell-basierten prädiktiven Regelungsansätzen für die Herstellung von PET-Behältern T2 - Tagungsband | AALE 2026 N2 - In dem Beitrag wird das entwickelte Konzept für die Modell-basierte prädiktive Regelung des zweistufigen dynamischen Produktionsprozesses von PET-Behältern vorgestellt. Die regelungstechnischen Herausforderungen bilden zum einen die äußerst große Anzahl an Stell- und Regelgrößen und zum anderen die Nichtlinearität und Komplexität des physikalischen Verhaltens der Regelstrecke. Den Kern des Regelungsansatzes nimmt ein Digitaler Prototyp für die Abbildung des instationären Verhaltens der Aufheizphase von Vorformlingen ein. Aus physikalischer Modellbildung resultiert ein dynamisches mathematisches Modell für die gekoppelten Wärmeübertragungsmechanismen, das u.a. auch nicht messbare Prozessgrößen für die echtzeitfähigen Optimierungsalgorithmen zur Verfügung stellt. Folglich kann die Qualität der hergestellten PET-Behälter unter den schwierigen Produktionsbedingungen bei Verwendung von recycelten Materialien sichergestellt werden. Validierungen zeigen eine hohe Modellgüte für verschiedene Systemanregungen. KW - Modell-basierte prädiktive Regelung KW - Physikalische Modellbildung KW - Wärmeübertragung Y1 - 2026 U6 - https://doi.org/10.33968/2026.01 SP - 125 EP - 136 ER -