TY - CHAP A1 - Versen, Martin A1 - Hayn, M. T1 - Introduction to Verification and Test Using a 4-Bit Arithmetic Logic Unit Including a Failure Module in a Xilinx XC9572XL CPLD T2 - Proceedings of the 40th ISTFA 2014 KW - Microelectronics KW - Xilinx XC9572XL CPLD Y1 - 2018 ER - TY - CHAP A1 - Versen, Martin A1 - Kipfelsberger, Stefan A1 - Bernhardt, Andreas T1 - Einführung in die Aufbau- und Verbindungstechnik durch eine interaktive und praxisnahe Qualifizierung in der Leiterplattentechnik T2 - Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung" N2 - Für eine Einführung in die fertigungstechnischen Grundlagen der Aufbau- und Verbindungstechnik sind im Wahlfach „Leiterplattentechnik Praktikum“ an der Technischen Hochschule (TH) Rosenheim Inhalte der Prozesstechnik und des Leiterplattendesigns miteinander kombiniert. Zu Beginn der Veranstaltung zeichnen die Praktikumsteilnehmer ein Layout für eine Leiterbahn-Teststruktur, welche anschließend im Haus gefertigt wird. Nach der Fertigung folgt eine elektrische und optische Charakterisierung zur Kontrolle der Prozessqualität. Die praxisnahe Erstellung eines einlagigen Layouts für eine LED-Taschenlampe auf Basis eines vorgegebenen Schaltplans und innerhalb einer begrenzten Platinenfläche sowie dessen Fertigung befähigen die Kursteilnehmer später, eigene Layouts für elektronische Schaltungen selbstständig zu entwickeln. Die anspruchsvolle, teilautomatische Bestückung einer zweilagigen, vorgegebenen SMT(Surface Mount Technology)-Leiterplatte, die ein FM-Radio mit Capacitive Touch-Steuerung bildet, rundet die erfolgreiche Qualifizierung in der Leiterplattentechnik ab. KW - Leiterplattentechnik Y1 - 2020 UR - https://opus4.kobv.de/opus4-haw-landshut/frontdoor/index/index/docId/212 SN - 978-3-9818439-4-1 SP - 54 EP - 62 CY - Landshut ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin T1 - Automatische Erkennung von Kunststoffen durch bildgebende Fluoreszenzabklingzeitmessung T2 - Tagungsband: AALE 2020 - Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz KW - Erkennung von Kunststoffen KW - Fluoreszenzabklingzeitmessung Y1 - 2020 SN - 978-3-8007-5180-8 SP - 223 EP - 231 PB - VDE Verlag Berlin ER - TY - CHAP A1 - Heitauer, Mathias A1 - Versen, Martin T1 - Co-Simulation eines zweistufigen Operationsverstärkers mit MATLAB/Simulink und Cadence ADE T2 - Tagungsband: AALE 2020 - Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz N2 - Ein zweistufiger Operationsverstärker wird parallel in einer 180nm CMOS Technologie in der Entwicklungsumgebung von Cadence ADE und in MATLAB/Simulink in einem modellbasierten Ansatz entworfen und simuliert. Für den Entwurf in MATLAB/Simulink wird das Kleinsignalersatzschaltbild der physikalischen Schaltung verwendet. Mit Hilfe der Co-Simulation zwischen Cadence und MATLAB/Simulink wird das Verhalten simuliert und ausgewertet. Die Ergebnisse aus beiden Modellen stimmen überein, wodurch festgestellt werden kann, dass die Co-Simulation erfolgreich war. KW - Co-Simulation KW - Operationsverstärker Y1 - 2020 SN - 978-3-8007-5180-8 SP - 287 EP - 291 PB - VDE Verlag Berlin CY - Berlin ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, G. A1 - Versen, Martin T1 - A novel approach to optically distinguish plastics based on fluorescence lifetime measurements T2 - 2020 IEEE Sensors Applications Symposium (SAS), Kuala Lumpur, Malaysia KW - fluorescence Y1 - 2020 SP - 1 EP - 6 ER - TY - JOUR A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Detection of plastics in water based on their fluorescence behavior JF - Journal of Sensors and Sensor Systems N2 - Plastic waste is one of the biggest growing factors contributing to environmental pollution. So far there has been no established method to detect and identify plastics in environmental matrices. Thus, a method based on their characteristic fluorescence behavior is used to investigate whether plastics can be detected and identified in tap water under laboratory conditions. The experiments show that the identification of plastics as a function of water depth is possible. As the identification becomes more difficult with higher water depths, investigations with a highly sensitive imaging method were carried out to obtain an areal integration of the fluorescent light and thus better results. KW - identification of plastics Y1 - 2020 UR - https://doi.org/10.5194/jsss-9-337-2020 VL - 9 IS - 2 SP - 337 EP - 343 ER - TY - JOUR A1 - Versen, Martin A1 - Ernst, W. T1 - Row hammer avoidance analysis of DDR3 SDRAM JF - Microelectronics Reliability N2 - A DDR3 SDRAM test setup implemented on the Griffin III test system from HILEVEL Technologies is used to analyse the row hammer bug. Row hammer pattern experiments are compared to standard retention tests for different manufacturing technologies. The row hammer effect is depending on the number of stress activation cycles. The analysis is extended to an avoidance scheme with refreshes similar to the Target Row Refresh scheme for the DDR4 SDRAM technology. KW - DDR4 SDRAM technology Y1 - 2020 UR - https://doi.org/10.1016/j.microrel.2020.113744 SP - 113744 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Auer, Veronika A1 - Versen, Martin A1 - Laforsch, Christian T1 - A Novel Approach to Identify Wood Species Optically using Fluorescence Lifetime Imaging Microscopy T2 - SMSI 2021 Conference – Sensor and Measurement Science International N2 - This contribution presents the results obtained with fluorescence lifetime imaging microscopy (FLIM)within the optical identification and differentiation of the four wood species walnut, beech, spruce, and maple. The experimental setup as well as the evaluation algorithm, with which the experiments were carried out, is explained briefly. KW - fluorescence lifetime KW - wood species identification KW - fluorescence KW - wood KW - FLIM Y1 - 2021 UR - https://doi.org/10.5162/SMSI2021/B10.2 SP - 169 EP - 170 ER - TY - CHAP A1 - Seehuber, S. A1 - Crämer, P. A1 - Kipfelsberger, S. A1 - Versen, Martin T1 - EtherCAT Gateway für eine Arduino basierte Luftqualitäts-Messung zur Visualisierung an eine Beckhoff SPS T2 - Tagungsband 3. Symposium Elektronik und Systemintegration ESI KW - EtherCAT Gateway KW - Beckhoff SPS Y1 - 2022 U6 - https://doi.org/10.57688/366 SP - 98 EP - 106 ER - TY - CHAP A1 - Bernöcker, Anton A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Entwicklung eines neuronalen Netzwerks als Basis zur automatisierten Holzartenerkennung T2 - Tagungsband AALE 2022, 18. AALE-Konferenz. Pforzheim, 09.03.-11.03.2022 N2 - Holz ist ein vielseitig einsetzbarer nachwachsender Rohstoff. Neben seinem wirtschaftlichen Nutzen ist er für den Erhalt des Klimas unersetzlich. Eine sortenreine Sortierung für die Weiterverarbeitung von Altholz spielt für einen ressourcenschonenden Umgang eine wichtige Rolle. Um das Potenzial eines neuronalen Netzwerks basierend auf Messdaten der bildgebenden Fluoreszenzabklingzeitmessung für die Altholzsortierung aufzuzeigen, wurden zwei unterschiedliche Klassifikationsansätze auf Basis der Programmiersprache Python gewählt. Die Ergebnisse zeigen, dass die bildbasierte Klassifizierung der Holzart mit einer Genauigkeit von 47,36 % noch ausbaufähig ist. Eine datenbasierte Klassifizierung der Holzart mit einer Identifikationsgenauigkeit von 98,28 % ist dagegen vielversprechend. KW - FD-FLIM KW - Fluoreszenz KW - Fluoreszenzabklingzeit KW - Holzart KW - Neuronales Netz KW - Klassifizierung Y1 - 2022 U6 - https://doi.org/https://doi.org/10.33968/2022.11 SP - 115 EP - 124 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Auer, Veronika A1 - Versen, Martin A1 - Laforsch, Christian T1 - An algorithmic method to identify multiple wood species in a single image by their specific fluorescence lifetimes T2 - OSA Imaging and Applied Optics Congress 2021 (3D, COSI, DH, ISA, pcAOP) N2 - Fluorescence lifetime imaging microscopy (FLIM) combined with an image processing algorithm is successfully used for the optical identification and areal separation of three wood species of maple, larch and nut in a single taken image. KW - Confocal laser scanning microscopy KW - Fluorescence lifetime imaging KW - Image processing KW - Image processing algorithms KW - Phase shift KW - Ultraviolet radiation Y1 - 2021 U6 - https://doi.org/10.1364/COSI.2021.CF2B.3 SP - CF2B.3 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin A1 - Laforsch, Christian T1 - An optical method to differentiate wood from polymers using fluorescence lifetime imaging microscopy T2 - OSA Optical Sensors and Sensing Congress 2021 (AIS, FTS, HISE, SENSORS, ES) N2 - In this contribution investigations with fluorescence lifetime imaging microscopy (FLIM) are made to optically distinguish polymers and wood. The results show that the distinction and identification is possible in a graphical and calculative way. KW - Diode lasers KW - Fluorescence lifetime imaging KW - Image processing algorithms KW - Phase shift KW - Raman spectroscopy KW - Stray light Y1 - 2021 U6 - https://doi.org/10.1364/ES.2021.EW4G.6 SP - EW4G.6 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Optical identification of car tire particles on soil using fluorescence lifetime imaging microscopy T2 - Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES), Technical Digest Series (Optica Publishing Group, 2022) N2 - Tire wear is one of the major contributors of environmental pollution by microplastic. FD-FLIM in combination with an image processing algorithm are successfully applied to detect tyre wear on soil. KW - Diode lasers KW - Fluorescence lifetime imaging KW - Image processing KW - Image processing algorithms KW - Phase modulation KW - Phase shift Y1 - 2022 U6 - https://doi.org/10.1364/ES.2022.ETu3H.3 SP - ETu3H.3 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin T1 - A novel approach to optically distinguish plastics based on fluorescence lifetime measurements T2 - 2020 IEEE Sensors Applications Symposium (SAS) N2 - In medical and biological research, fluorescence lifetime measurements and fluorescence lifetime imaging is already a part of the standardized analysis procedures. As first investigations have shown, polymers can be identified using fluorescence lifetime imaging and an evaluation algorithm. Thus, this contribution pursues a novel approach for the direct differentiation of four polymers with fluorescence lifetime imaging. Therefore, the evaluation algorithm is extended to compare several fluorescence lifetime images to prove that a distinction is possible. Y1 - 2020 U6 - https://doi.org/10.1109/SAS48726.2020.9220084 SP - 1 EP - 6 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Non-destructive evaluation of treated polyethylene terephthalate films by fluorescence lifetime imaging T2 - 2021 IEEE Sensors Applications Symposium (SAS) N2 - The fluorescence decay time allows to identify and distinguish polymers from each other. Three differently treated biaxially-oriented polyethylene terephthalate films are examined with two excitation wavelengths of 445 and 488nm. The fluorescence decay time is dependent of the treatment method of the films and is a means for identification. KW - polymer KW - polymer identification KW - fluorescence lifetime imaging KW - fluorescence KW - FD-FLIM Y1 - 2021 U6 - https://doi.org/10.1109/SAS51076.2021.9530008 SP - 1 EP - 5 ER - TY - CHAP A1 - Höltl, Stefan A1 - Kneißl, Matthias A1 - Versen, Martin T1 - Parallel Delta-Sigma ADC modulation for performance increase of position sensors in industrial applications T2 - 2021 IEEE Sensors Applications Symposium (SAS) N2 - A parallel design concept of Delta-Sigma modulators that optimizes the resolution and the bandwidth for a highly dynamic position control in industrial applications. The idea is realized on a printed circuit board and tested by using a comprehensive measurement setup. The effective number of bits is increased by 2.5 bits at a fixed frequency. For a constant resolution, the design approach allows smaller filter lengths and a decrease of the delay by 25%. KW - Delta-Sigma KW - ADC KW - parallelization KW - characterization KW - effective resolution KW - bandwidth Y1 - 2021 U6 - https://doi.org/10.1109/SAS51076.2021.9530099 SP - 1 EP - 5 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Frequency-domain fluorescence lifetime imaging as method to analyze wood structures T2 - 2022 Conference on Lasers and Electro-Optics (CLEO) Y1 - 2022 SP - 1 EP - 2 ER - TY - CHAP A1 - Wohlschlaeger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - A novel approach to optically detect microplastic in an environmental matrix with Rapid-FLIM T2 - Sensors and Measuring Systems; 21th ITG/GMA-Symposium Y1 - 2022 SP - 1 EP - 6 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschlaeger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Non-destructive differentiation of treated and non-treated wood using fluorescence lifetime imaging microscopy T2 - Sensors and Measuring Systems; 21th ITG/GMA-Symposium Y1 - 2022 SP - 1 EP - 6 ER - TY - JOUR A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - An algorithmic method for the identification of wood species and the classification of post-consumer wood using fluorescence lifetime imaging microscopy JF - Journal of Sensors and Sensor Systems N2 - In this contribution the frequency domain fluorescence lifetime imaging microscopy (FD-FLIM) technique is evaluated for post-consumer wood sorting. The fluorescence characteristics of several wood samples were determined, whereby two excitation wavelengths (405 and 488 nm) were used. The measured data were processed using algorithmic methods to identify the wood species and post-consumer wood category. With the excitation wavelength of 405 nm, 16 out of 19 samples could be correctly assigned to the corresponding post-consumer wood category by means of the fluorescence lifetimes. Thus, the experimental results revealed the high potential of the FD-FLIM technique for automated post-consumer wood sorting. Y1 - 2022 U6 - https://doi.org/10.5194/jsss-11-129-2022 VL - 11 IS - 1 SP - 129 EP - 136 ER - TY - JOUR A1 - Heitauer, Mathias A1 - Versen, Martin T1 - Evaluation of a Co-Simulation Approach for Functional Verification of Analog and Mixed Signal Devices JF - EDFA Technical Articles N2 - This article presents an automation workflow for the development of analog and mixed-signal devices similar to the two-stage process used for the design and verification of logic ICs. The use of a co-simulation interface makes it possible to build and verify failure models. KW - delta-sigma converter KW - functional verification KW - mixed signal devices KW - model-based development KW - system simulation Y1 - 2021 U6 - https://doi.org/10.31399/asm.edfa.2021-3.p008 VL - 23 IS - 3 SP - 8 EP - 12 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Investigation of the Impact of CaCO3 Concentrations on the Fluorescence Lifetime of Polypropylene T2 - 2022 Conference on Lasers and Electro-Optics (CLEO) N2 - The impact of fillers on the fluorescence lifetime of polymers is still unknown. Investigating polypropylene containing different CaCO 3 concentrations using FD-FLIM show an exponential increase in fluorescence lifetime proportional to the CaCO 3 density in polypropylene. KW - Fluorescence KW - Lasers and electrooptics KW - Plastics KW - Electrooptical waveguides Y1 - 2022 SP - 1 EP - 2 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Frequency-domain fluorescence lifetime imaging as method to analyze wood structures T2 - Conference on Lasers and Electro-Optics N2 - The analysis of wood structures using FD-FLIM seems promising for the identification of wood at 488 nm, as lignin has a high impact on the fluorescence lifetime. KW - Diode lasers KW - Fluorescence KW - Fluorescence lifetime imaging KW - Microscopy Y1 - 2022 U6 - https://doi.org/10.1364/CLEO_AT.2022.JW3A.19 SP - JW3A.19 ER - TY - CHAP A1 - Maniyattu, Georgekutty Jose A1 - Geegy, Eldho A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Development of a neural network to identify plastics using Fluorescence Lifetime Imaging Microscopy T2 - 2022 IEEE Sensors Applications Symposium (SAS) N2 - Plastics have become a major part of human’s daily life. An uncontrolled usage of plastic leads to an accumulation in the environment posing a threat to flora and fauna, if not recycled correctly. The correct sorting and recycling of the most commonly available plastic types and an identification of plastic in the environment are important. Fluorescence lifetime imaging microscopy shows a high potential in sorting and identifying plastic types. A data-based and an image-based classification are investigated using python programming language to demonstrate the potential of a neural network based on fluorescence lifetime images to identify plastic types. The results indicate that the data-based classification has a higher identification accuracy compared to the image-based classification. KW - fluorescence lifetime imaging KW - FLIM KW - neural networks KW - plastic identification Y1 - 2022 U6 - https://doi.org/10.1109/SAS54819.2022.9881372 SP - 1 EP - 6 ER - TY - CHAP A1 - Bernöcker, Anton A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Entwicklung eines neuronalen Netzwerks als Basis zur automatisierten Holzartenerkennung T2 - 18. AALE-Konferenz. Pforzheim, 09.03.-11.03.2022 N2 - Holz ist ein vielseitig einsetzbarer nachwachsender Rohstoff. Neben seinem wirtschaftlichen Nutzen ist er für den Erhalt des Klimas unersetzlich. Eine sortenreine Sortierung für die Weiterverarbeitung von Altholz spielt für einen ressourcenschonenden Umgang eine wichtige Rolle. Um das Potenzial eines neuronalen Netzwerks basierend auf Messdaten der bildgebenden Fluoreszenzabklingzeitmessung für die Altholzsortierung aufzuzeigen, wurden zwei unterschiedliche Klassifikationsansätze auf Basis der Programmiersprache Python gewählt. Die Ergebnisse zeigen, dass die bildbasierte Klassifizierung der Holzart mit einer Genauigkeit von 47,36 % noch ausbaufähig ist. Eine datenbasierte Klassifizierung der Holzart mit einer Identifikationsgenauigkeit von 98,28 % ist dagegen vielversprechend. KW - FD-FLIM KW - Fluoreszenz KW - Fluoreszenzabklingzeit KW - Holzart KW - Neuronales Netz KW - Klassifizierung Y1 - 2022 U6 - https://doi.org/10.33968/2022.11 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Investigation of the Impact of CaCO3 Concentrations on the Fluorescence Lifetime of Polypropylene T2 - Conference on Lasers and Electro-Optics N2 - The impact of fillers on the fluorescence lifetime of polymers is still unknown. Investigating polypropylene containing different CaCO3 concentrations using FD-FLIM show an exponential increase in fluorescence lifetime proportional to the CaCO3 density in polypropylene. KW - Diode lasers KW - Fluorescence KW - Fluorescence lifetime imaging KW - Fourier transforms KW - Phase shift KW - Stray light Y1 - 2022 U6 - https://doi.org/10.1364/CLEO_AT.2022.AM2M.2 SP - AM2M.2 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin A1 - Laforsch, Christian T1 - An optical method to differentiate wood from polymers using fluorescence lifetime imaging microscopy T2 - OSA Optical Sensors and Sensing Congress 2021 (AIS, FTS, HISE, SENSORS, ES) (2021), paper EW4G.6 N2 - In this contribution investigations with fluorescence lifetime imaging microscopy (FLIM) are made to optically distinguish polymers and wood. The results show that the distinction and identification is possible in a graphical and calculative way. Y1 - 2021 U6 - https://doi.org/10.1364/ES.2021.EW4G.6 SP - EW4G.6 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Auer, Veronika A1 - Versen, Martin A1 - Laforsch, Christian T1 - An algorithmic method to identify multiple wood species in a single image by their specific fluorescence lifetimes T2 - OSA Imaging and Applied Optics Congress 2021 (3D, COSI, DH, ISA, pcAOP) (2021), paper CF2B.3 N2 - Fluorescence lifetime imaging microscopy (FLIM) combined with an image processing algorithm is successfully used for the optical identification and areal separation of three wood species of maple, larch and nut in a single taken image. Y1 - 2021 U6 - https://doi.org/10.1364/COSI.2021.CF2B.3 SP - CF2B.3 ER -