TY - JOUR A1 - Obermeier, Frederik A1 - Schumacher, Mara A1 - Barth, Simon A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Verstärkung von Polypropylen mit Holzfasern durch Direkt-Compoundierung JF - Zeitschrift Kunststofftechnik N2 - Ergänzend zum bisherigen Stand der Wissenschaft und Technik wurden in dieser Veröffentlichung Fichtefasern aus einem thermo-mechanischen Aufschlussprozess über einen Spritzgusscompounder mit Polypropylen und Haftvermittler direkt compoundiert. Bei der direkten einstufigen Verarbeitung wurde ein steigender Holzfaseranteil bis 30 Gew.-% untersucht. Die Charakterisierung der Materialkombinationen erfolgte durch Zugversuche, Melt-Flow-Rate Messungen, Dichtebestimmung, Mikroskopie und Kerbschlagbiegeversuche. Bei steigendem Holzfaseranteil wird eine Steigerung der Zugeigenschaften, der Viskosität und der Dichte festgestellt. Die Kerbschlagzähigkeit bleibt bei steigendem Holzfaseranteil im Rahmen der Standardabweichung konstant, ist jedoch im Vergleich zum unveränderten Grundpolymer geringer. KW - Direkt-Compoundierung KW - Spritzgusscompounder KW - Holz KW - Holzfaser KW - Polypropylen Y1 - 2021 VL - 2021 IS - 2 SP - 87 EP - 111 PB - Carl Hanser Verlag CY - München ER - TY - JOUR A1 - Barth, Simon A1 - Schmid, Thomas A1 - Michanickl, Andreas T1 - TECHNICAL NOTE: A METHOD TO DETERMINE THE WETTING OF WOOD FIBERS WITH THERMOPLASTIC JF - Wood and Fiber Science N2 - This paper presents a method which allows to assess the wettability of thermomechanical pulp (TMP) with thermoplastic. The method is based on the usage of laboratory sheets made of TMP and plastic granules which form drops under heat. The contact angle of the drops after re-solidification on the surface of the laboratory sheets serves as the wetting characteristic. This method enables a direct and evaluable testing of wood fiber thermoplastic combinations. The exemplary results indicate that wood species, pulping temperature and mercerization influence the wettability of TMP with thermoplastic. KW - thermomechanical pulp KW - thermoplastic KW - wettability Y1 - 2021 UR - https://doi.org/10.22382/wfs-2021-16 VL - 53 IS - 2 SP - 157 EP - 159 ER -