TY - RPRT A1 - Geladze, Ekaterine A1 - Schanda, Ulrich A1 - Châteauvieux-Hellwig, Camille A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. T1 - Bauakustik meets BIM T2 - Jahresbericht 2019, Forschung - Entwicklung - Innovation KW - BIM Y1 - 2020 ER - TY - CHAP A1 - Schanda, Ulrich A1 - Hoßfeld, Michael A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. T1 - In-plane excitation of reception plates according to EN 15657:2017 T2 - Proceedings of ICA 2019 KW - Körperschall KW - Normung KW - Körperschallquellen KW - Prüfstand Y1 - 2019 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Prognose von Körperschall aus haustechnischen Anlagen – ein robustes und einfaches Tabellenverfahren für den Holzbau T2 - 10. HolzBauSpezial Y1 - 2019 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Experimental investigation of a single reception plate method to obtain two source quantities required to predict structure-borne sound transmission in buildings T2 - Proceedings of ICA 2019 KW - Körperschall KW - Messtechnik KW - Körperschallquellen Y1 - 2019 ER - TY - CHAP A1 - Hierl, Robin A1 - Schanda, Ulrich A1 - Schöpfer, Fabian A1 - Weise, Yvonne T1 - Experimental development of a timber floor system with improved impact sound insulation in the low-frequency range T2 - Proceedings of Forum Acusticum 2023 Y1 - 2023 ER - TY - CHAP A1 - Kruse, Tobias A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Kennwerte für die schalltechnische Prognose von gebäudetechnischen Anlagen am Beispiel einer Wärmepumpe T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - Installationen KW - TechnischeAkustik KW - GebaeudetechnischeAnlagen KW - Koerperschall Y1 - 2023 ER - TY - CHAP A1 - Kruse, Tobias A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Mayr, Andreas R. T1 - Input data for the prediction of noise from technical equipment using a heat pump T2 - Proceedings of Forum Acusticum 2023 KW - Berechnungsmethoden KW - Körperschall KW - Körperschallquellen KW - TechnischeAkustik KW - Koerperschall Y1 - 2023 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Prognose von Installationsgeräuschen im Holzbau T2 - Fortschritte der Akustik - DAGA Y1 - 2019 SN - 978-3-939296-14-0 SP - 86 EP - 89 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Structure-borne sound sources in timber buildings – prediction of machinery noise using measured transmission functions T2 - Proceedings of ICA 2019 KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - Installationen KW - GebaeudetechnischeAnlagen Y1 - 2019 ER - TY - CHAP A1 - Hoßfeld, Michael A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Untersuchungen zur Ausweitung des Verfahrens zur Ermittlung der charakteristischen Körperschallleistung haustechnischer Anlagen mittels Empfangsplatten gemäß DINEN15657:2017-10 auf Anregungen in Plattenebene T2 - Fortschritte der Akustik - DAGA Y1 - 2019 SN - 978-3-939296-14-0 ER - TY - CHAP A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Hopkins, Carl T1 - Measurement and prediction of structure-borne sound transmission from machinery in timber-frame buildings T2 - Proceedings of Euronoise 2018 KW - Berechnungsmethoden KW - Körperschall KW - HolzLeichtBau KW - Körperschallquellen Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Körperschallübertragung im Holzbau: Übertragungsfunktionen T2 - 8. HolzBauSpezial KW - Körperschall KW - HolzLeichtBau KW - Körperschallquellen KW - Koerperschall KW - ZukunftBauUebertragung Y1 - 2017 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Ansätze zur Prognose des Installationspegels im Holz-Leichtbau T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - ZukunftBauUebertragung KW - Impulshammer Y1 - 2017 SN - 978-3-939296-12-6 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Prediction of noise from machinery in timber-frame buildings using transmission functions T2 - Proceedings of ICSV24 KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - ZukunftBauUebertragung KW - Impulshammer Y1 - 2017 SN - 978-1-906913-27-4 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Chapter 2: LF impact sound level using intensity T2 - COST Action FP0702: Net-Acoustics for Timber based lightweight buildings and elements: E-Book KW - Berechnungsmethoden KW - HolzLeichtBau KW - Messtechnik Y1 - 2012 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian T1 - Nachhaltiger Schallschutz gebäudetechnischer Anlagen T2 - Forschungsbericht 2014 Y1 - 2015 SP - 20 EP - 23 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Bewertung und Ertüchtigung von Bestandsdecken in der Sanierung T2 - 2. Internationale Akustik & Brandschutztage KW - HolzLeichtBau KW - Trittschall KW - Flankenübertragung KW - Luftschall KW - Decke Y1 - 2013 ER - TY - GEN A1 - Kruse, Tobias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Schöpfer, Fabian T1 - FH-IPTOOLS: Predicting wastewater noise in timber constructions - a project introduction T2 - Proceedings of Forum Acusticum/Euronoise N2 - The research project FH-IPTOOLS is a joint project between Rosenheim Technincal University of Applied Sciences (THRo) and the University of Applied Sciences Döpfer (HSD) in collaboration with industrial partners and timber construction associations. The aim is to develop prediction tools for sound insulation, focusing on acoustic comfort and the perception of noise from technical service equipment. The project focuses on wastewater systems in timber and lightweight constructions. Concepts need to be developed to ensure that acoustic comfort is taken into account in the design process. HSD is working on the psychoacoustic aspects. Signal detection theory will be used to formulate suitable evaluation methods to assess noise from building service equipment. Listening tests and field measurements will be used to develop criteria for sound insulation in timber construction to improve acoustic comfort. As part of the project, structure-borne sound characterisation will be carried out at THRo on a reception plate test rig. Therefore a reception plate with similar properties to timber frame constructions will be used. The aim is to develop methods for the direct measurement of structure-borne sound power in timber and lightweight constructions, while also determining airborne sound power. Initial results will be presented in the paper. Y1 - 2025 ER - TY - GEN A1 - Kruse, Tobias A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Dehm, Maximilian T1 - Experience with the high mobility reception plate for source characterization according to EN 15657 T2 - INTER-NOISE and NOISE-CON Congress and Conference Proceedings N2 - EN 12354-5 describes methods for the prediction of noise from technical equipment based on the airborne sound radiation and the structure-borne sound excitation. This paper considers methods to characterize the source in terms of structure-borne-sound (sbs) emission. Laboratory methods for sbs source characterization are given in EN 15657. In current research and development projects at Rosenheim Technical University of Applied Sciences these methods are applied to fully characterize technical equipment such as heat pumps or ventilation systems. This includes the determination of the equivalent blocked force, the source single equivalent free velocity and the source single equivalent mobility. EN 15657 describes various methods to determine the required properties. Recent project experience showed that this is essentially necessary because the most suitable method has to be applied depending on the nature of the technical equipment. This paper presents experiences with indirect measurement methods on the high-mobility plate and the direct measurement method given in EN 15657. Y1 - 2024 U6 - https://doi.org/10.3397/IN_2024_4067 SP - 8261 EP - 8268 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Öhler, Sven A1 - Scheck, Jochen ED - Fouad, Nabil A. T1 - Geräusche gebäudetechnischer Anlagen – Bestimmung von Eingangsdaten und Berechnung der Schallübertragung im Gebäude T2 - Bauphysik-Kalender 2025 Y1 - 2025 SN - 9783433034514 SP - 469 EP - 500 ER - TY - GEN A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Châteauvieux-Hellwig, Camille T1 - Suggestion for a round-robin test on the measurement of vibration reduction indices on CLT junctions T2 - Proceedings of Forum Acusticum/Euronoise Y1 - 2025 ER - TY - GEN A1 - Kruse, Tobias A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schmidt, Thorsten A1 - Hanz, Thomas T1 - Building service equipment – from source characterization and prediction to validation in buildings T2 - Proceedings of DAS|DAGA 2025 Y1 - 2025 ER -