TY - RPRT A1 - Andrae, Marc A1 - Auer, Veronika A1 - Barth, Simon A1 - Baumann, Sarah A1 - Betz, Andreas A1 - Châteauvieux-Hellwig, Camille A1 - Geladze, Ekaterine A1 - Hauch, Julia A1 - Hirschmüller, Sebastian A1 - Kapitza, Stephanie A1 - Karlinger, Peter A1 - Köster, Heinrich A1 - Kramer, Oliver A1 - Lüftl, Katharina A1 - Martius, Henrike A1 - Mayr, Andreas A1 - Michanickl, Andreas A1 - Miletzky, Frank A1 - Mühlbauer, Wolfgang A1 - Niedermaier, Peter A1 - Obermeier, Frederik A1 - Peklo, Franziska A1 - Regauer, Verena A1 - Schanda, Ulrich A1 - Schemme, Michael A1 - Schiffer, Lukas A1 - Schöpfer, Fabian A1 - Schumacher, Mara A1 - Schutter, Sabina A1 - Schweiger, Andreas A1 - Seckler, Eva A1 - Sigg, Ferdinand T1 - Jahresbericht 2019, Forschung - Entwicklung - Innovation N2 - Mit dem jährlich erscheinenden Forschungsbericht möchte die Technische Hochschule Rosenheim einen Einblick in ihre vielfältigen Projekte und Aktivitäten der angewandten Forschung und Entwicklung geben. T3 - Schriftenreihen - Forschungsbericht - 8 KW - Forschung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-13977 ER - TY - JOUR A1 - Frescura, Alessia A1 - Lee, Pyoung Jik A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Correlations between standardised and real impact sound sources in lightweight wooden structures JF - Applied Acoustics N2 - This study aimed to understand the correlation between standard impact sound sources and real impact sources in lightweight floor structures. Six real impact sources (adult walking, child running, child jumping on the floor, and three objects falling) were used to be compared with standard impact sources (i.e. tapping machine and impact ball). Measurements were conducted on a lightweight timber joist floor. Impact sound pressure levels (SPLs) produced by the standard impact sources were measured on the four floor structures with or without carpet tiles. For the real impact sources, two walkers wearing socks and slippers walked at different speeds (normal and fast) along three paths, while two children ran along the three paths and jumped at four positions. Also, the SPLs generated by dropped objects were measured at five positions. Seven standardised single-number quantities (SNQs) were calculated for the tapping machine and the impact ball, while three noise ratings (LAeq, LAFmax, and LN) were also computed from the sound recordings of the real impact sources. Both the tapping machine and the impact ball showed similar frequency characteristics with the real impact sources across all the floor structures. All the SNQs for the tapping machine and the impact ball were highly correlated with the energy-based noise ratings of the adult walking and little differences were found across walking speeds and footwear. Similar tendencies were observed from other real impact sources, indicating the high correlations between the standardised SNQs of the tapping machine and the impact ball and the noise ratings. KW - Impact sound KW - Single-number quantities KW - Noise ratings KW - Lightweight wooden structures Y1 - 2021 UR - https://doi.org/10.1016/j.apacoust.2020.107690 VL - 173 SP - 107690 ER - TY - THES A1 - Schöpfer, Fabian T1 - Vibroacoustics of timber-frame structures excited by structure-borne sound sources N2 - This thesis investigates the measurement and prediction of machinery noise in timber-frame buildings. To quantify the structure-borne sound power input from multi-point sources, simplified approaches were assessed that reduce the required data for out-of-plane force excitation. This identified approaches that give estimates within ±5 dB from 20 Hz to 2000 Hz. To investigative the importance of out-of-plane moment excitation, inverse methods were used to determine the power input; these were affected by noise but processing was used to overcome this shortcoming. A series of experimental investigations were carried out on a timber-frame structure undergoing mechanical point excitation. The driving-point mobility showed orthotropic plate characteristics at low frequencies, ribbed-plate characteristics in a narrow frequency band and infinite plate characteristics in mid- and high-frequency ranges. The moment mobility above or in-between studs was similar to infinite beam or plate theory with interpolation between these theories where necessary. The experimental work indicated the potential to use Statistical Energy Analysis (SEA) to predict sound transmission. The first experimental finding was that above the mass-spring-mass resonance frequency, the vibrational response of the wall leaves was uncorrelated. The second was a significant decrease in vibration across the wall from the excitation point, with structural intensity showing a decrease in net power flow across successive timber studs. The third was that tongue and groove connections between chipboard sheets significantly reduce the vibration transmission above 500 Hz. This led to different SEA models being used to model a timber-frame wall undergoing mechanical point excitation. A 41-subsystem model was found to be necessary to reproduce the measured vibration levels on both leaves within 10 dB. As there is a significant decrease in vibration with distance in the mid- and high-frequency range, the region close to the excitation point is particularly important and the SEA model has better accuracy in this region. An alternative engineering approach to the prediction of machinery noise in timber-frame buildings was introduced and validated that used measured transmission functions between the injected power and the spatial-average sound pressure level in a receiving room. A field survey and case studies indicate this is a feasible and practical approach. KW - acoustics KW - building acoustics KW - timber-frame KW - construction KW - structural acoustics KW - structure-borne sound KW - machinery noise Y1 - 2019 UR - https://doi.org/10.17638/03033463 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Bayer, Jeremias T1 - Analysis of measured transmission functions in timber buildings T2 - Proceedings of Forum Acusticum 2023 Y1 - 2023 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Nusser, Bernd A1 - Arnold, Jörg A1 - Vogel, Albert A1 - Völker, Conrad T1 - Entwicklungen bei der Prognose von Geräuschen aus gebäudetechnischen Anlagen T2 - 12. Bauphysiktage 2024 KW - Körperschall KW - Normung KW - Körperschallquellen KW - Installationen Y1 - 2024 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Übertragungsfunktionen - einfache Prognose des Lärms bei gebäudetechnischen Anlagen T2 - Bauphysik & Gebäudetechnik KW - 03Installationen Y1 - 2024 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Analyse der tieffrequenten Trittschallübertragung mittels Übertragungsfunktionen T2 - Fortschritte der Akustik - DAGA Y1 - 2021 ER - TY - JOUR A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Schallschutz bei gebäudetechnischen Anlagen planen: Praxistaugliches Prognoseverfahren nutzt Übertragungsfunktionen im Holzbau JF - Bauen+ Y1 - 2021 SN - 2363-8125 IS - 5 SP - 21 EP - 25 ER - TY - CHAP A1 - Châteauvieux-Hellwig, Camille A1 - Schanda, Ulrich A1 - Geladze, Ekaterine A1 - Schöpfer, Fabian A1 - Frischmann, Felix A1 - Rabold, Andreas A1 - Mayr, Andreas R. T1 - An open BIM workflow for the prediction of sound insulation in timber constructions T2 - Proceedings of Euronoise 2021 KW - HolzLeichtBau KW - Holzmassivbau KW - Luftschalldämmung KW - BIM KW - Trittschalldämmung Y1 - 2021 ER - TY - CHAP A1 - Kruse, Tobias A1 - Schanda, Ulrich A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Rabold, Andreas T1 - Bauakustische Kennwerte dreier identischer Gebäude in unterschiedlicher Bauweise T2 - Fortschritte der Akustik - DAGA KW - Holzmassivbau KW - Luftschalldämmung KW - Trittschall KW - Decke KW - Wand KW - Massivbau Y1 - 2021 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Kruse, Tobias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Erfahrungen mit der DIN EN 15657:2017-10 und dem Empfangsplattenprüfstand an der TH Rosenheim T2 - Fortschritte der Akustik - DAGA KW - Berechnungsmethoden KW - Körperschall KW - Normung KW - Körperschallquellen KW - Installationen KW - Prüfstand Y1 - 2022 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Kruse, Tobias A1 - Weinzierl, Johanna A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Experiences with source characterization methods within and beyond the scope of EN 15657 T2 - Proceedings of Inter-Noise 2022 Y1 - 2022 ER - TY - CHAP A1 - Weber, Katharina A1 - Schanda, Ulrich A1 - Schöpfer, Fabian T1 - Lautheit als Messgröße für die Trittschallübertragung T2 - Fortschritte der Akustik - DAGA KW - Trittschall KW - Psychoakustik Y1 - 2022 ER - TY - CHAP A1 - Weinzierl, Johanna A1 - Kruse, Tobias A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Leistungsvergleich gebäudeähnlicher Strukturen bei in-plane und out-of-plane Anregung T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - Messtechnik KW - Körperschallquellen KW - Prüfstand Y1 - 2022 ER - TY - CHAP A1 - Bayer, Jeremias A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Prognoseverfahren für Installationsgeräusche im Holzbau T2 - Fortschritte der Akustik - DAGA KW - Berechnungsmethoden KW - Körperschall KW - Normung KW - HolzLeichtBau KW - Holzmassivbau Y1 - 2022 ER - TY - CHAP A1 - Pfattheicher, Silas A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Rabold, Andreas T1 - Untersuchung des Einflusses von Vorsatzschalen vor Massivholzelementen auf das Stoßstellendämm-Maß T2 - Fortschritte der Akustik - DAGA KW - HolzLeichtBau KW - Holzmassivbau KW - Stoßstellen Y1 - 2022 ER - TY - CHAP A1 - Weinzierl, Johanna A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Vorschlag für eine neue Messmethode zur Bestimmung von Abwassergeräuschen am Prüfstand T2 - Fortschritte der Akustik - DAGA KW - Normung KW - GebaeudetechnischeAnlagen KW - Prüfstand Y1 - 2020 ER - TY - CHAP A1 - Weinzierl, Johanna A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Approach for a new laboratory method to determine noise from waste water installations T2 - Proceedings of e-Forum Acusticum 2020 Y1 - 2020 ER - TY - CHAP A1 - Châteauvieux-Hellwig, Camille A1 - Geladze, Ekaterine A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Schöpfer, Fabian T1 - Prognoseverfahren zum Schall- und Schwingungsschutz für BIM-basierte Gebäudeplanung T2 - Fortschritte der Akustik - DAGA KW - BIM Y1 - 2020 ER - TY - RPRT A1 - Geladze, Ekaterine A1 - Schanda, Ulrich A1 - Châteauvieux-Hellwig, Camille A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. T1 - Bauakustik meets BIM T2 - Jahresbericht 2019, Forschung - Entwicklung - Innovation KW - BIM Y1 - 2020 ER - TY - CHAP A1 - Schanda, Ulrich A1 - Hoßfeld, Michael A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. T1 - In-plane excitation of reception plates according to EN 15657:2017 T2 - Proceedings of ICA 2019 KW - Körperschall KW - Normung KW - Körperschallquellen KW - Prüfstand Y1 - 2019 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Prognose von Körperschall aus haustechnischen Anlagen – ein robustes und einfaches Tabellenverfahren für den Holzbau T2 - 10. HolzBauSpezial Y1 - 2019 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Experimental investigation of a single reception plate method to obtain two source quantities required to predict structure-borne sound transmission in buildings T2 - Proceedings of ICA 2019 KW - Körperschall KW - Messtechnik KW - Körperschallquellen Y1 - 2019 ER - TY - CHAP A1 - Hierl, Robin A1 - Schanda, Ulrich A1 - Schöpfer, Fabian A1 - Weise, Yvonne T1 - Experimental development of a timber floor system with improved impact sound insulation in the low-frequency range T2 - Proceedings of Forum Acusticum 2023 Y1 - 2023 ER - TY - CHAP A1 - Kruse, Tobias A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Kennwerte für die schalltechnische Prognose von gebäudetechnischen Anlagen am Beispiel einer Wärmepumpe T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - Installationen KW - TechnischeAkustik KW - GebaeudetechnischeAnlagen KW - Koerperschall Y1 - 2023 ER - TY - CHAP A1 - Kruse, Tobias A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Mayr, Andreas R. T1 - Input data for the prediction of noise from technical equipment using a heat pump T2 - Proceedings of Forum Acusticum 2023 KW - Berechnungsmethoden KW - Körperschall KW - Körperschallquellen KW - TechnischeAkustik KW - Koerperschall Y1 - 2023 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Prognose von Installationsgeräuschen im Holzbau T2 - Fortschritte der Akustik - DAGA Y1 - 2019 SN - 978-3-939296-14-0 SP - 86 EP - 89 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Structure-borne sound sources in timber buildings – prediction of machinery noise using measured transmission functions T2 - Proceedings of ICA 2019 KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - Installationen KW - GebaeudetechnischeAnlagen Y1 - 2019 ER - TY - CHAP A1 - Hoßfeld, Michael A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Untersuchungen zur Ausweitung des Verfahrens zur Ermittlung der charakteristischen Körperschallleistung haustechnischer Anlagen mittels Empfangsplatten gemäß DINEN15657:2017-10 auf Anregungen in Plattenebene T2 - Fortschritte der Akustik - DAGA Y1 - 2019 SN - 978-3-939296-14-0 ER - TY - CHAP A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Hopkins, Carl T1 - Measurement and prediction of structure-borne sound transmission from machinery in timber-frame buildings T2 - Proceedings of Euronoise 2018 KW - Berechnungsmethoden KW - Körperschall KW - HolzLeichtBau KW - Körperschallquellen Y1 - 2018 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Körperschallübertragung im Holzbau: Übertragungsfunktionen T2 - 8. HolzBauSpezial KW - Körperschall KW - HolzLeichtBau KW - Körperschallquellen KW - Koerperschall KW - ZukunftBauUebertragung Y1 - 2017 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Ansätze zur Prognose des Installationspegels im Holz-Leichtbau T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - ZukunftBauUebertragung KW - Impulshammer Y1 - 2017 SN - 978-3-939296-12-6 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Prediction of noise from machinery in timber-frame buildings using transmission functions T2 - Proceedings of ICSV24 KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - ZukunftBauUebertragung KW - Impulshammer Y1 - 2017 SN - 978-1-906913-27-4 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Schanda, Ulrich T1 - Chapter 2: LF impact sound level using intensity T2 - COST Action FP0702: Net-Acoustics for Timber based lightweight buildings and elements: E-Book KW - Berechnungsmethoden KW - HolzLeichtBau KW - Messtechnik Y1 - 2012 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian T1 - Nachhaltiger Schallschutz gebäudetechnischer Anlagen T2 - Forschungsbericht 2014 Y1 - 2015 SP - 20 EP - 23 ER - TY - CHAP A1 - Schöpfer, Fabian T1 - Bewertung und Ertüchtigung von Bestandsdecken in der Sanierung T2 - 2. Internationale Akustik & Brandschutztage KW - HolzLeichtBau KW - Trittschall KW - Flankenübertragung KW - Luftschall KW - Decke Y1 - 2013 ER - TY - GEN A1 - Kruse, Tobias A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Schöpfer, Fabian T1 - FH-IPTOOLS: Predicting wastewater noise in timber constructions - a project introduction T2 - Proceedings of Forum Acusticum/Euronoise N2 - The research project FH-IPTOOLS is a joint project between Rosenheim Technincal University of Applied Sciences (THRo) and the University of Applied Sciences Döpfer (HSD) in collaboration with industrial partners and timber construction associations. The aim is to develop prediction tools for sound insulation, focusing on acoustic comfort and the perception of noise from technical service equipment. The project focuses on wastewater systems in timber and lightweight constructions. Concepts need to be developed to ensure that acoustic comfort is taken into account in the design process. HSD is working on the psychoacoustic aspects. Signal detection theory will be used to formulate suitable evaluation methods to assess noise from building service equipment. Listening tests and field measurements will be used to develop criteria for sound insulation in timber construction to improve acoustic comfort. As part of the project, structure-borne sound characterisation will be carried out at THRo on a reception plate test rig. Therefore a reception plate with similar properties to timber frame constructions will be used. The aim is to develop methods for the direct measurement of structure-borne sound power in timber and lightweight constructions, while also determining airborne sound power. Initial results will be presented in the paper. Y1 - 2025 ER - TY - GEN A1 - Kruse, Tobias A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Dehm, Maximilian T1 - Experience with the high mobility reception plate for source characterization according to EN 15657 T2 - INTER-NOISE and NOISE-CON Congress and Conference Proceedings N2 - EN 12354-5 describes methods for the prediction of noise from technical equipment based on the airborne sound radiation and the structure-borne sound excitation. This paper considers methods to characterize the source in terms of structure-borne-sound (sbs) emission. Laboratory methods for sbs source characterization are given in EN 15657. In current research and development projects at Rosenheim Technical University of Applied Sciences these methods are applied to fully characterize technical equipment such as heat pumps or ventilation systems. This includes the determination of the equivalent blocked force, the source single equivalent free velocity and the source single equivalent mobility. EN 15657 describes various methods to determine the required properties. Recent project experience showed that this is essentially necessary because the most suitable method has to be applied depending on the nature of the technical equipment. This paper presents experiences with indirect measurement methods on the high-mobility plate and the direct measurement method given in EN 15657. Y1 - 2024 U6 - https://doi.org/10.3397/IN_2024_4067 SP - 8261 EP - 8268 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich A1 - Öhler, Sven A1 - Scheck, Jochen ED - Fouad, Nabil A. T1 - Geräusche gebäudetechnischer Anlagen – Bestimmung von Eingangsdaten und Berechnung der Schallübertragung im Gebäude T2 - Bauphysik-Kalender 2025 Y1 - 2025 SN - 9783433034514 SP - 469 EP - 500 ER - TY - GEN A1 - Schöpfer, Fabian A1 - Schanda, Ulrich A1 - Châteauvieux-Hellwig, Camille T1 - Suggestion for a round-robin test on the measurement of vibration reduction indices on CLT junctions T2 - Proceedings of Forum Acusticum/Euronoise Y1 - 2025 ER - TY - GEN A1 - Kruse, Tobias A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schmidt, Thorsten A1 - Hanz, Thomas T1 - Building service equipment – from source characterization and prediction to validation in buildings T2 - Proceedings of DAS|DAGA 2025 Y1 - 2025 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Châteauvieux-Hellwig, Camille A1 - Frischmann, Felix A1 - Schöpfer, Fabian T1 - Forschungsschwerpunkt: Prognoseverfahren zum Schall- und Schwingungsschutz für BIM-basierte Gebäudeplanung: Schlussbericht N2 - Im Zuge der Digitalisierung im Bauwesen eröffnet der Ansatz von BIM die Möglichkeit, modellbasierte Berechnungsergebnisse für eine vollständige Schallschutzprognose und damit für die Einhaltung der gesetzlichen oder privatrechtlich vereinbarten Anforderungen zu einem frühen Planungsstadium und in einen digitalen Planungsprozess integriert einfließen zu lassen. Dies ist ein nächster Schritt, den Planungsprozess weiter zu digitalisieren, damit kosteneffizient zu gestalten und die Planungssicherheit zu erhöhen. Vor diesem Hintergrund wurde an der TH Rosenheim der Forschungsschwerpunkt „Prognoseverfahren zum Schall- und Schwingungsschutz für BIM-basierte Gebäudeplanung“ unter dem Forschungsfeld Akustik im Bauwesen geschaffen. Der Forschungsschwerpunkt umfasst insbesondere den Schall- und Schwingungsschutz im Holzbau sowie den Körperschall aus gebäudetechnischen Anlagen. Der Fokus liegt dabei auf dem mehrgeschossigen Holzbau. KW - Building Information Modeling (BIM) KW - Schallschutz KW - Schwingungsschutz KW - Holzbau KW - IFC KW - Planungsprozess Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-24993 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian T1 - FHprofUnt 2012: Nachhaltiger Schallschutz gebäudetechnischer Anlagen in energetisch optimierten Gebäuden: Teilprojekt 2: Schlussbericht KW - Gebäudetechnische Anlagen KW - Holzleichtbau KW - Holzmassivbau KW - Installationen KW - Körperschallquellen KW - Schallschutz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-25463 ER - TY - RPRT A1 - Schöpfer, Fabian A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Übertragungsfunktionen im Holzbau: Prognose der Schallübertragung aus haustechnischen Anlagen mit einem tabellarischen, praxistauglichen Ingenieurersatzverfahren: Forschungsbericht N2 - Zum Nachweis des gesetzlich geforderten Schallschutzes bei gebäudetechnischen Anlagen ist die Kenntnis der von diesen Anlagen ausgehenden Schallemissionen und deren Übertragung im Gebäude erforderlich. Hierfür steht mit der EN 12354-5:2009 ein validiertes Berechnungsverfahren zur Verfügung, das aber nur im Massivbau anwendbar ist. Ziel dieses Vorhabens war es, auch für den Holzbau ein praktikables Berechnungsverfahren zu erarbeiten, um die im Holzbau aufwendigen Planungsprozesse zur Erfüllung des geforderten Schallschutzes zu verbessern. Dabei wird ein empirisches Verfahren basierend auf gemessenen Übertragungsfunktionen vorgeschlagen. Damit kann die gesamte Übertragung von der eingeleiteten Körperschallleistung bis zum resultierenden Schalldruckpegel im schutzbedürftigen Raum beschreiben werden. Diese Übertragungsfunktionen können messtechnisch in Gebäuden in Holzbauweise ermittelt werden. Die prinzipielle Eignung dieses Verfahrens konnte für ausgewählte Übertragungssituationen in Forschungsarbeiten sowohl von der Technischen Hochschule Rosenheim als auch von anderen Forschungseinrichtungen bereits gezeigt werden. Im Rahmen dieses Projektes wurden Übertragungsfunktionen in Gebäuden in Holzbauweise ermittelt. Aus den so ermittelten Daten wurden Gruppen für ähnliche Übertragungswege und Konstruktionen gebildet. Für diese wurden repräsentative Übertragungsfunktionen abgeleitet, die nun erstmals eine Abschätzung des Schalldruckpegels aus gebäudetechnischen Anlagen im Holzbau ermöglichen. KW - Holzmassivbau KW - Körperschallquellen KW - Installationen KW - Gebaeudetechnische Anlagen KW - Holzleichtbau Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-25249 ER -