TY - CHAP A1 - Buchschmid, M. A1 - Kohrmann, M. A1 - Winter, C. A1 - Müller, G. A1 - Völtl, R. A1 - Schanda, Ulrich T1 - Vibroacoustic Characteristics of Light-Weighted Slabs. Part 2: Measurement-Based Investigation of the Sound Radiation of Suspended Ceilings T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - In this contribution a method for the prediction of the radiated sound out of the velocity field of a vibrating ceiling is presented. The numerical method was validated via measurements on a real structure using a pp-probe. It is based on Integral Transform techniques and can be applied in the postprocessing of a FEM simulation (harmonic analysis) [1]. The method was verified by measurements on the real structure and can be used for parametrical studies. Rounding off the Parts 1 and 2 of this publication nomograms, based on dimensionless parameters, can be developed to predict the sound radiation of light weight slabs. Hereby different sets of geometry as well as different configurations of ceilings can be studied in order to describe the acoustical and dynamical behaviour of wooden ceilings. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Kohrmann, M. A1 - Buchschmid, M. A1 - Müller, G. A1 - Völtl, R. A1 - Schanda, Ulrich T1 - Numerical models for the prediction of vibroacoustical characteristics of light-weighted ceilings T2 - Internoise 2013 N2 - In order to set up guidelines for the design of light-weighted ceilings for timber constructions to be used by engineers in practice, investigations based on both measurements and numerical models have been carried out within the cooperative research project “VibWood”. In this contribution the setup and the calibration of the numerical model of the structure as well as the prediction of radiated sound are discussed, where a special focus is set on a dimensionless description in order to deduce information for a wide range of system’s specifications. The structure, consisting of a timber slab, a floating floor and a suspended ceiling, is built up in a Finite Element model, where the material properties of wood and the characteristics of the system (e.g.support conditions, contact phenomena dynamic properties of individual parts) are considered. The model is parameterized in order to enable computations with varying geometry and material parameters. After calibrating the FE-model with the help of measurements using model updating techniques dimensionless parameters are defined based on the Buckingham-π- Theorem and computations are carried out in order to specify guidelines for various systems. The radiation of sound is computed in a post processing using Integral Transform Methods. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Schanda, Ulrich A1 - Tröbs, H.-M. A1 - Völtl, R. A1 - Becker, P. T1 - Semi-empirical model of the impact force of a walking person in the time domain and generated impact sound spectra T2 - Internoise 2013 KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - CHAP A1 - Tröbs, H.-M. A1 - Schanda, Ulrich A1 - Völtl, R. T1 - Measurement of the radiation efficiency of suspended ceilings at low frequencies using swept sine excitation and high-frequency resolution T2 - Internoise 2013 N2 - It is common for timber ceiling constructions to include a suspended ceilings made of plasterboard. In order to minimize the radiation from impact excitation, especially in the low frequency range below 100 Hz, a detailed analysis of the vibration behaviour was necessary. An experimental modal analysis was carried out and the radiated sound power from the suspended ceiling was measured using a sweep sine excitation by a shaker connected to the top layer of the timber floor construction. Since the experimental modal analysis was conducted using a high frequency resolution and with a non-stationary sound field, it was necessary to check the validity of the intensity measurements by comparing it with 1/3-octave band measurements. The results show very good agreement. By this means the radiation efficiency can be measured simultaneously with an experimental modal analysis of a structure. KW - Schallmesstechnik KW - Holzbau Y1 - 2013 ER - TY - CHAP A1 - Mecking, S. A1 - Völtl, R. A1 - Winter, C. A1 - M., Buchschmid A1 - Schanda, Ulrich A1 - Müller, G. T1 - Methodenvergleich zur Bestimmung von Verlustfaktoren von Massivholzelementen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - Die mithilfe der Abklingmethode ermittelten Verlustfaktoren sind bei mehreren Eigenfrequenzen pro Frequenzband zuverlässig. Die Ergebnisse der Resonanzbreitenmethode beziehen sich dagegen auf die Eigenfrequenzen und sind nur bei einer geringen Modenüberlappung zuverlässig. Beide Methoden sind gleichwertig, wenn mehrere Eigenschwingungen im Frequenzband vorhanden sind und die Modenüberlappung gleichzeitig gering ist. Für einseitig überlagerte Resonanzkurven wurde eine einfache Alternative der Resonanzbreitenmethode vorgeschlagen. Die Ergebnisse wurden im Rahmen des gemeinsam von der TU München, der HS Rosenheim und dem ift Rosenheim durchgef¨uhrten DFG-AiF Forschungsvorhabens ”Vibroakustik im Planungsprozess für Holzbauten” erarbeitet. Das IGF-Vorhaben 17328N/1 der Forschungsvereinigung HS Rosenheim wurde über die AiF im Rahmen des Programms zur Förderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert. KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - CHAP A1 - Völtl, R. A1 - Schanda, Ulrich A1 - Kohrmann, M. A1 - Buchschmid, M. A1 - Müller, G. T1 - Simultaneous operational vibration analysis of different layers of lightweight timber floors T2 - Internoise 2013 N2 - Within the scope of the research project "VibWood", operational vibration analyses of timber floor constructions were carried out. In order to understand the vibration behaviour of and the sound transmission through the layers of the constructions the coupling between them was investigated. The transfer function from the point of excitation to a pattern of receiving positions located on each of the layers of the construction was measured using a swept sine excitation. As a result, the frequency range of decoupling between the base floor and the floating floor and between the base floor and the suspended ceiling could be identified and the individual vibration behavior analyzed. The measurements also included the radiated sound power from the suspended ceiling. There is indication that there is not necessarily a correlation between the eigenmodes of the suspended ceiling and the maxima of the radiated sound power KW - Schallmesstechnik KW - Holzbau Y1 - 2018 ER - TY - CHAP A1 - Becker, P. A1 - Schanda, Ulrich A1 - Völtl, R. T1 - Charakterisierung der Anregekraft des menschlichen Gehers für Trittschallmessungen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2012 ER - TY - CHAP A1 - Völtl, R. A1 - Kohrmann, M. A1 - Schanda, Ulrich A1 - Buchschmid, M. A1 - Müller, G. T1 - Messung und Berechnung der Schwingungen von Holzdecken im Prüfstand T2 - Deutsche Gesellschaft für Akustik e.V. DAGA N2 - Im Rahmen des AIF-Forschungsprojektes VibWood werden im Deckenprüfstand der HS Rosenheim unterschiedliche Holzdeckenkonstruktionen hinsichtlich ihres Schwingungsverhaltens im Bereich zwischen 4 Hz und 200 Hz untersucht. Parallel dazu werden diese Holzdeckenkonstruktionen an der TU München mittels FE-Berechnungen modelliert. Für die Untersuchungen steht ein Prüfstand zur Verfügung, welcher die Möglichkeit bietet, Decken oder Deckenelemente mit Abmessungen von max. 5,5 m x 5,5 m auf einer Stahlwinkelkonsole aufzulagern. Die Deckenelemente können so durch Messung der Übertragungsfunktionen hinsichtlich ihrer Schwingungsformen untersucht werden. Ein Ziel der Untersuchungen ist es, die tieffrequenten Schwingungen von Holzdecken mit Hilfe von Schwingungstilgern deutlich zu reduzieren. Es werden erste Ergebnisse der Validierung der FE-Modelle vorgestellt, insbesondere der Einfluss der Auflagerung der Deckenelemente auf die Übertragungsfunktion. Weiterhin werden Messergebnisse für unterschiedliche Anregungsarten diskutiert KW - Holzbau KW - Schallmesstechnik Y1 - 2012 ER - TY - CHAP A1 - Völtl, R. A1 - Franzen, T. A1 - Schanda, Ulrich T1 - Experimental investigations on the sound transmission of drywall constructions at low frequencies T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), DAGA KW - Schallmesstechnik KW - Trockenbau Y1 - 2009 ER -