TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Optical identification of car tire particles on soil using fluorescence lifetime imaging microscopy T2 - Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES), Technical Digest Series (Optica Publishing Group, 2022) N2 - Tire wear is one of the major contributors of environmental pollution by microplastic. FD-FLIM in combination with an image processing algorithm are successfully applied to detect tyre wear on soil. KW - Diode lasers KW - Fluorescence lifetime imaging KW - Image processing KW - Image processing algorithms KW - Phase modulation KW - Phase shift Y1 - 2022 U6 - https://doi.org/10.1364/ES.2022.ETu3H.3 SP - ETu3H.3 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin T1 - A novel approach to optically distinguish plastics based on fluorescence lifetime measurements T2 - 2020 IEEE Sensors Applications Symposium (SAS) N2 - In medical and biological research, fluorescence lifetime measurements and fluorescence lifetime imaging is already a part of the standardized analysis procedures. As first investigations have shown, polymers can be identified using fluorescence lifetime imaging and an evaluation algorithm. Thus, this contribution pursues a novel approach for the direct differentiation of four polymers with fluorescence lifetime imaging. Therefore, the evaluation algorithm is extended to compare several fluorescence lifetime images to prove that a distinction is possible. Y1 - 2020 U6 - https://doi.org/10.1109/SAS48726.2020.9220084 SP - 1 EP - 6 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Non-destructive evaluation of treated polyethylene terephthalate films by fluorescence lifetime imaging T2 - 2021 IEEE Sensors Applications Symposium (SAS) N2 - The fluorescence decay time allows to identify and distinguish polymers from each other. Three differently treated biaxially-oriented polyethylene terephthalate films are examined with two excitation wavelengths of 445 and 488nm. The fluorescence decay time is dependent of the treatment method of the films and is a means for identification. KW - polymer KW - polymer identification KW - fluorescence lifetime imaging KW - fluorescence KW - FD-FLIM Y1 - 2021 U6 - https://doi.org/10.1109/SAS51076.2021.9530008 SP - 1 EP - 5 ER - TY - CHAP A1 - Höltl, Stefan A1 - Kneißl, Matthias A1 - Versen, Martin T1 - Parallel Delta-Sigma ADC modulation for performance increase of position sensors in industrial applications T2 - 2021 IEEE Sensors Applications Symposium (SAS) N2 - A parallel design concept of Delta-Sigma modulators that optimizes the resolution and the bandwidth for a highly dynamic position control in industrial applications. The idea is realized on a printed circuit board and tested by using a comprehensive measurement setup. The effective number of bits is increased by 2.5 bits at a fixed frequency. For a constant resolution, the design approach allows smaller filter lengths and a decrease of the delay by 25%. KW - Delta-Sigma KW - ADC KW - parallelization KW - characterization KW - effective resolution KW - bandwidth Y1 - 2021 U6 - https://doi.org/10.1109/SAS51076.2021.9530099 SP - 1 EP - 5 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Frequency-domain fluorescence lifetime imaging as method to analyze wood structures T2 - 2022 Conference on Lasers and Electro-Optics (CLEO) Y1 - 2022 SP - 1 EP - 2 ER - TY - CHAP A1 - Wohlschlaeger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - A novel approach to optically detect microplastic in an environmental matrix with Rapid-FLIM T2 - Sensors and Measuring Systems; 21th ITG/GMA-Symposium Y1 - 2022 SP - 1 EP - 6 ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschlaeger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Non-destructive differentiation of treated and non-treated wood using fluorescence lifetime imaging microscopy T2 - Sensors and Measuring Systems; 21th ITG/GMA-Symposium Y1 - 2022 SP - 1 EP - 6 ER - TY - JOUR A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - An algorithmic method for the identification of wood species and the classification of post-consumer wood using fluorescence lifetime imaging microscopy JF - Journal of Sensors and Sensor Systems N2 - In this contribution the frequency domain fluorescence lifetime imaging microscopy (FD-FLIM) technique is evaluated for post-consumer wood sorting. The fluorescence characteristics of several wood samples were determined, whereby two excitation wavelengths (405 and 488 nm) were used. The measured data were processed using algorithmic methods to identify the wood species and post-consumer wood category. With the excitation wavelength of 405 nm, 16 out of 19 samples could be correctly assigned to the corresponding post-consumer wood category by means of the fluorescence lifetimes. Thus, the experimental results revealed the high potential of the FD-FLIM technique for automated post-consumer wood sorting. Y1 - 2022 U6 - https://doi.org/10.5194/jsss-11-129-2022 VL - 11 IS - 1 SP - 129 EP - 136 ER - TY - JOUR A1 - Heitauer, Mathias A1 - Versen, Martin T1 - Evaluation of a Co-Simulation Approach for Functional Verification of Analog and Mixed Signal Devices JF - EDFA Technical Articles N2 - This article presents an automation workflow for the development of analog and mixed-signal devices similar to the two-stage process used for the design and verification of logic ICs. The use of a co-simulation interface makes it possible to build and verify failure models. KW - delta-sigma converter KW - functional verification KW - mixed signal devices KW - model-based development KW - system simulation Y1 - 2021 U6 - https://doi.org/10.31399/asm.edfa.2021-3.p008 VL - 23 IS - 3 SP - 8 EP - 12 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Investigation of the Impact of CaCO3 Concentrations on the Fluorescence Lifetime of Polypropylene T2 - 2022 Conference on Lasers and Electro-Optics (CLEO) N2 - The impact of fillers on the fluorescence lifetime of polymers is still unknown. Investigating polypropylene containing different CaCO 3 concentrations using FD-FLIM show an exponential increase in fluorescence lifetime proportional to the CaCO 3 density in polypropylene. KW - Fluorescence KW - Lasers and electrooptics KW - Plastics KW - Electrooptical waveguides Y1 - 2022 SP - 1 EP - 2 ER -