TY - JOUR A1 - Timpte, A. A1 - Mecking, S. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Stoßstellendämm-Maße von Brettsperrholzkonstruktionen JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - CHAP A1 - Timpte, A. A1 - Mecking, S. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Vibration reduction indices of CLT junctions T2 - Proceedings of ICSV24 N2 - The multi-disciplinary research project “Vibroacoustic analysis in the planning process of timber constructions“ carried out in cooperation between the University of Applied Sciences Rosenheim, the ift Rosenheim and the Technical University Munich is a comprehensive study of direct as well as flanking structure-borne and airborne sound insulation of Cross Laminated Timber (CLT) elements and their junctions. The aim is to optimize and simplify the acoustical planning process of wooden multi-storey buildings and thereby to contribute to the increase growth of timber construction industry in Europe. For a prediction of the acoustical performance of solid wood constructions, the vibration reduction index Kij is needed. The vibration reduction index can be determined i.a. of the direction-averaged junction velocity level difference and the structural reverberation time. Both quantities need to be measured according to EN ISO 10848. Alternatively, vibration reduction indices for a T- or cross-junction can be derived following the procedures described in prEN ISO 12354-1:2016. However, further knowledge and data of the sound transmission across junctions of CLT is inevitable for a reliable prediction. In this paper a collection of frequency dependent vibration reduction indices for CLT structures will be presented and compared, involving L-, T- and cross-junctions measured by six international laboratories. KW - Schallmesstechnik Y1 - 2017 ER - TY - RPRT A1 - Rabold, A. A1 - Schramm, M. T1 - Vibroakustik im Planungsprozess für Holzbauten – Modellierung, numerische Simulation, Validierung – Teilprojekt 4: Bauteilprüfung, FEM-Modellierung und Validierung KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings T2 - Proceedings of Euronoise 2015 KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - Stoßstellendämm-Maße von Massivholzelementen für die SEA basierte Berechnung nach EN 12354 T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzdecken Y1 - 2017 ER - TY - JOUR A1 - Châteauviex-Hellwig, C. A1 - Mecking, S. A1 - Brummer, B. A1 - Rabold, A. T1 - Anwendung zur SEA basierten Berechnung nach EN 12354 für Massivholzelemente JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Massivholz Y1 - 2016 ER - TY - CHAP A1 - Rabold, Andreas A1 - Cheret, P. A1 - Schwaner, K. A1 - Seidel, A. T1 - Schallschutz im Holzbau T2 - Urbaner Holzbau – Chancen und Potentiale für die Stadt N2 - Bis in die 1990er Jahre wurde der Holzbau vornehmlich in ländlichen Regionen, allenfalls in stadtnahen Randgebieten gesehen. Seither hat sich viel getan. Ausgerechnet im urbanen Raum wächst der Wunsch nach Holzbauwerken aller Art. Neben vielen Alltagsaufgaben, die der Stadtreparatur oder der Sanierung des Bestands zuzuordnen sind und bei denen sich der Holzbau unauffällig bewährt, erregen neuartige Gebäude in der Fachwelt besonderes Aufsehen. Sie zeigen nicht nur die Machbarkeit mehrgeschossiger Holzbauten in den Innenstädten, sondern auch ihr städtebauliches und architektonisches Potenzial. Auf diesen Seiten untersuchen namhafte Experten die Stadtentwicklung der jüngsten Zeit und loten in diesem Kontext die Möglichkeiten des Holzbaus aus. Neben den baurechtlichen Voraussetzungen wird der aktuelle technische Stand des Holzbaus ebenso dargestellt wie sein ökologischer und energetischer Nutzen. Die Nachhaltigkeit als 300 Jahre altes Prinzip der Forstbewirtschaftung ist nun auch Maxime für das Planen, Bauen und Betreiben von Gebäuden. Dass die Entwicklung der Städte neues Potenzial für den Holzbau freisetzt und sich hier Städteplaner, Architekten und Ingenieure die Vorteile des Baustoffes zu Nutze machen, belegt eine Dokumentation 22 beispielgebender Gebäude der letzten Jahre. Mit Unterstützung des Landesbetriebs ForstBW und der Nachhaltigkeitsstrategie Baden-Württemberg – Themenfeld Zukunftsfähige Entwicklung von Städten und Regionen, Projekt Bauen mit Holz – wurde das Buch „Urbaner Holzbau – Chancen und Potenziale für die Stadt“ von Peter Cheret, Kurt Schwaner und Arnim Seidel herausgegeben, dessen Inhalte hier in verkürzter Form wiedergegeben sind. KW - Holzbau KW - Schallschutz Y1 - 2018 PB - Dom Publishers CY - Berlin ER - TY - CHAP A1 - Rabold, Andreas A1 - Düster, A. A1 - Rank, E. T1 - Anwendung der Finiten Elemente Methode auf die Trittschallberechnung von Holzdecken T2 - DAGA Tagungsband N2 - Die Optimierung der tieffrequenten Trittschalldämmung von Holzdecken kann durch Berechnungen mit der finiten Elemente Methode (FEM) effektiv gestaltet werden. Die mit der FEM berechneten Ei genwerte und Eigenmoden des Bauteils bilden hierbei die Basis, um durch die Modalanalyse Rück schlüsse für die Bauteiloptim ierung ziehen zu können. In diesem Beitrag wird die im Rahmen eines aktuellen Gemeinschaft sprojektes mit dem ibp Stuttgart und dem ift Rosenheim erfolgte Anwendung der FEM zur Berechnung der Trittschalldämmung im Überblick vorgestellt und auf die Modellierung der Anregungskraft detaillierter eingegangen. KW - Trittschallberechnung KW - Holzdecken KW - Finiten Elemente Methode Y1 - 2018 ER - TY - CHAP A1 - Rabold, Andreas A1 - Düster, A. T1 - FEM based prediction model for the impact sound level of floors T2 - EURONOISE 2008- Conference Proceedings N2 - Up to now the research and developmen t in the field of building acoustics is based mainly on measurements. The consequence is that the development and optimization of a new building component is a very tedious and expensive task. A considerably reduction of these costs could be achieved, if the optimization relying on measurements would be replaced – at least to some extent – by a computational prediction model. Motivated by these aspects a method is presented for using finite element techniques to estimate the impact sound level from lightweight floors. The overall approach consists of the three-dimensional modeling of the structure and the excitation source (tapping machine), the subsequent moda l- and spectral analyses an d the computation of the radiated sound from the ceiling. KW - Building acustics KW - Lightweight floors Y1 - 2018 ER - TY - CHAP A1 - Rabold, Andreas A1 - Düster, A. A1 - Hessinger, J. A1 - Rank, E. T1 - Optimization of lightweight floors in the low frequency range with a FEM based prediction model T2 - DAGA Tagungsband N2 - The impact noise transmission at low frequencies is a well known problem of lightweight floors, which is treated in many publications. A satisfying solution, considering the different construction principles of lightweight floors, could not be found so far. To overcome this problem a FEM based prediction model for the optimization of the floor construction and the improvement of the impact sound insulation has been developed and applied in a current research project at th e TU München. The details of the prediction model were published in [1]-[3]. This contribution gives an overview of the prediction model and shows the results of the computations and the construction rules developed for optimized lightweight floors. KW - Building acustics KW - Lightweight floors Y1 - 2018 ER - TY - JOUR A1 - Rabold, Andreas A1 - Buchschmied, M. A1 - Duster, A. A1 - Müller, G. A1 - Rank, E. T1 - Modelling the excitation force of a standard tapping machine on lightweight floor structures JF - Journal of building acustics N2 - Up to now the research and development in the field of building acoustics is based mainly on measurements. In consequence the development and optimization of a new building component is a very tedious and expensive task. A considerable reduction of these costs could be achieved, if the optimization relying on measurements would be replaced – at least to some extent – by a computational prediction model. For these models it is necessary to represent not only the component and the adjacent rooms but also the excitation in a suitable way. This paper gives an overview of models for the excitation generated by a standard tapping machine taking into account the interaction between the impacting steel cylinders of the tapping machine and the vibrating surface of the floor. KW - Tapping Machine KW - Lightweight floors Y1 - 2018 ER - TY - CHAP A1 - Chateauvieux-Hellwig, C. A1 - Schanda, Ulrich A1 - Rabold, A. A1 - Schramm, M. T1 - Messmethodenvergleich für das Stoßstellendämm-Maß von Massivholzelementen. Vibroakustik im Planungsprozess für Holzbauten, Teil 3. T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - CHAP A1 - Rabold, A. T1 - Trittschalldämmung richtig bewerten T2 - 1. Internationale Schall- und Akustiktage KW - Schallmesstechnik KW - Schalldämmung Y1 - 2011 ER - TY - CHAP A1 - Rabold, A. A1 - Schanda, Ulrich A1 - Hessinger, J. T1 - Korrelation zwischen Geher und Norm-Hammerwerk bei der Trittschallübertragung T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik Y1 - 2011 ER - TY - CHAP A1 - Rabold, A. A1 - Wissel, C. A1 - Schanda, Ulrich A1 - Hessinger, J. T1 - Prognose der Schalldämmung von leichten Trennwänden T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Leichtbau Y1 - 2010 ER - TY - CHAP A1 - Dolezal, F. A1 - Schramm, M. A1 - Rabold, A. A1 - Schanda, Ulrich T1 - Stoßstellen im Holzbau - Planung, Prognose und Ausführung T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2010 ER - TY - CHAP A1 - Reichelt, H. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Reduction of Low-frequency Vibrations of Wooden Floors by Tuned Mass Dampers T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2009 ER -