TY - JOUR A1 - Botzum, Edeltraud A1 - Klaes, Sophie ED - Jasmund, Christina T1 - Evaluation im Kontext sozialräumlichen Arbeitens JF - KiTa aktuell NRW. Fachzeitschrift für Leitungen, Fachkräfte und Träger KW - sozialräumliches Arbeiten KW - Kindertagesstätte Y1 - 2017 VL - 2017 IS - 26/9 SP - 182 EP - 185 PB - Carl Link Verlag CY - Kronach (Oberfranken) ER - TY - CHAP A1 - Böning, Sarah-Lena A1 - Botzum, Edeltraud ED - Matusiewicz, David ED - Muhrer-Schwaiger, Marco T1 - Was kann die Gesundheitswirtschaft von der Sozialen Arbeit lernen? T2 - Neuvermessung der Gesundheitswirtschaft N2 - Soziale Arbeit leistet einen Beitrag zu mehr sozialer Gerechtigkeit und zum Abbau sozialer Ungleichheit in der Gesellschaft, gleichzeitig gewinnt Gesundheit als Dimension sozialer Ungleichheit zunehmend an Bedeutung. Als Beispiele hierfür können chronische Erkrankungen, Behinderung und Pflegebedürftigkeit genannt werden, die häufig eine gleichberechtigte Teilhabe an der Gesellschaft erschweren, wodurch gesundheitliche Ungleichheit zu sozialer Ungleichheit führt beziehungsweise diese verstärkt. Fragestellungen zu Themen der Gesundheit haben demnach in vielfältiger Hinsicht auch Bezug auf Soziale Arbeit. KW - Gesundheitswirtschaft KW - Soziale Arbeit Y1 - 2017 SP - 231 EP - 240 PB - Springer Gabler Verlag CY - Wiesbaden ER - TY - JOUR A1 - Fekete, C. A1 - Post, M. A1 - Bickenbach, J. A1 - Middleton, J. A1 - Prodinger, Birgit A1 - Selb, M. A1 - Stucki, G. T1 - A structured approach to capture the lived experience of spinal cord injury: Data model and questionnaire of the International Spinal Cord Injury Community Survey (InSCI) JF - American Journal of physical and rehabilitation medicine N2 - The International Spinal Cord Injury (InSCI) community survey has been developed to collect internationally comparable data on the lived experience of persons with spinal cord injury (SCI) in all 6 WHO regions. The InSCI survey provides a crucial first step to generate evidence on functioning, health maintenance, and subjective well-being in persons with SCI globally. A major challenge in setting up the InSCI community survey was to develop a data model and questionnaire that comprehensively captures what matters to people and, at the same time, is feasible and parsimonious in terms of participant’s burden. This paper outlines the components of the InSCI data model and presents the question selection to operationalize the data model along the 4 guiding principles of efficiency, feasibility, comparability, and truth and discrimination. The data model consists of 6 components operationalized with 125 questions including functioning (n = 28 body functions and structures; n = 42 activities and participation), contextual factors (n = 26 environmental; n = 19 personal factors), lesion characteristics (n = 2), and appraisal of health and well-being (n = 8). The InSCI questionnaire presents an efficient and feasible solution with satisfying comparability to other populations; however, its validity and reliability still needs to be confirmed. KW - International Spinal Cord Injury KW - Comparability of spinal cord injury Y1 - 2017 UR - https://doi.org/10.1097/PHM.0000000000000622 VL - 96 IS - 2 SP - S5 EP - S16 ER - TY - JOUR A1 - Saal, Susanne A1 - Beutner, Katrin A1 - Bogunski, Julia A1 - Obermüller, Kathrin A1 - Müller, Martin A1 - Grill, Eva A1 - Meyer, Gabriele ED - Oxford Academic, T1 - Interventions for the prevention and treatment of disability due to acquired joint contractures in older people: a systematic review JF - Age and Ageing N2 - Background acquired joint contractures have significant effects on quality of life and functioning. Objective to determine the effects of interventions to prevent and treat disabilities in older people with acquired joint contractures. Methods systematic search (last 8/2016) via Cochrane Library, PubMed, EMBASE, PEDro, CINAHL, trial registries, reference lists of retrieved articles and scientific congress pamphlets. Controlled and randomised controlled trials in English or German comparing an intervention with another intervention or standard care were included. Two independent researchers performed the selection of publications, data extraction and critical appraisal. Results seventeen studies with 992 participants met the inclusion criteria: 16 randomised controlled trials and 1 controlled trial (nursing homes = 4, community settings = 13). The methodological quality of the studies varied. Splints were examined in four studies, stretching exercises in nine studies, and ultrasound, passive movement therapy, bed-positioning and group exercise were each examined in one study. Studies on splints revealed inconclusive results regarding joint mobility or spasticity. Five of seven studies that assessed active stretching programmes for healthy older people reported statistically significant effects on joint mobility in favour of the intervention. Pain, quality of life, activity limitations and participation restrictions were rarely assessed. Conclusion the evidence for the effectiveness of interventions to prevent and treat disability due to joint contractures is weak, particularly for established nursing interventions such as positioning and passive movement. Better understanding is required regarding the delivery of interventions, such as their intensity and duration. In addition to functional issues, activities and social participation should also be studied as outcomes. KW - ultrasonography KW - elderly KW - disability KW - muscle spasticity Y1 - 2018 IS - 46 ER - TY - JOUR A1 - Stucki, G. A1 - Prodinger, Birgit A1 - Bickenbach, J. T1 - Four steps to follow when documenting functioning with the International Classification of Functioning, Disability and Health JF - European Journal of physical and rehabilitation medicine N2 - In this methodological note on applying the ICF in rehabilitation, we introduce suitable tools that allow us to document comprehensively and systematically the lived experience of health to guide clinical practice, the management of services, evidence-informed policy and scientific inquiry. The objective of this methodological note is to present the currently available tools with respect to four questions: 1) what ICF domains to document; 2) what perspective to take; 3) what data collection tools to apply; and 4) which approach to use for reporting. The application of these tools is illustrated using the Swiss Spinal Cord Injury (SwiSCI) Cohort Study. Existing ICF Sets provide a practical approach for identifying the domains to document. One can document from the perspective of biological health, lived health, and appraised health. For identifying suitable data collection tools, either existing tools can be linked to the ICF or available ICF-based data collection tools can be used. For reporting, an interval scale metric is suggested. The four step approach presented provides users with a logical sequence to follow when planning the documentation of functioning using the ICF as a health information reference system in practice and research. KW - ICF KW - Rehabilitation KW - Cohort study KW - Health Y1 - 2017 UR - https://doi.org/10.23736/S1973-9087.17.04569-5 VL - 53 IS - 1 SP - 144 EP - 149 ER - TY - JOUR A1 - Auer, Veronika A1 - Husmann, Kai A1 - Gilly, Alexander A1 - Zscheile, Matthias A1 - Blendermann, Hans-Heinrich A1 - Beitzen-Heineke, Ingrid T1 - Bewertung der Buchenholz-Bereitstellungslogistik. Forschungsprojekt verdeutlicht Vorteile branchenübergreifender Zusammenarbeit in der Holzbereitstellungskette. JF - Holz-Zentralblatt KW - Buchenholz KW - Logistik KW - Holzbereitstellungskette Y1 - 2017 ER - TY - JOUR A1 - Maritz, R. A1 - Aronsky, D. A1 - Prodinger, Birgit T1 - The Implementation of the International Classification of Functioning, Disability and Health (ICF) in Electronic Health Records - A Systematic Review JF - Applied Clinical Informatics N2 - Background: The International Classification of Functioning, Disability and Health (ICF) is the World Health Organization’s standard for describing health and health-related states. Examples of how the ICF has been used in Electronic Health Records (EHRs) have not been systematically summarized and described yet. Objectives: To provide a systematic review of peer-reviewed literature about the ICF’s use in EHRs, including related challenges and benefits. Methods: Peer-reviewed literature, published between January 2001 and July 2015 was retrieved from Medline®, CINAHL®, Scopus®, and ProQuest® Social Sciences using search terms related to ICF and EHR concepts. Publications were categorized according to three groups: Requirement specification, development and implementation. Information extraction was conducted according to a qualitative content analysis method, deductively informed by the evaluation framework for Health Information Systems: Human, Organization and Technology-fit (HOT-fit). Results: Of 325 retrieved articles, 17 publications were included; 4 were categorized as requirement specification, 7 as development, and 6 as implementation publications. Information regarding the HOT-fit evaluation framework was summarized. Main benefits of using the ICF in EHRs were its unique comprehensive perspective on health and its interdisciplinary focus. Main challenges included the fact that the ICF is not structured as a formal terminology as well as the need for a reduced number of ICF codes for more feasible and practical use. Conclusion: Different approaches and technical solutions exist for integrating the ICF in EHRs, such as combining the ICF with other existing standards for EHR or selecting ICF codes with natural language processing. Though the use of the ICF in EHRs is beneficial as this review revealed, the ICF could profit from further improvements such as formalizing the knowledge representation in the ICF to support and enhance interoperability. KW - International Classification of Functioning KW - Disability and health KW - Electronic health records KW - Reference standards KW - Medical Informatics Y1 - 2017 UR - https://doi.org/10.4338/ACI2017050078 VL - 8 IS - 3 SP - 964 EP - 980 ER - TY - RPRT A1 - Stauss, Kilian T1 - Masterprojekt »Pfleiderer-Leuchtende Flächen« N2 - Das Unternehmen Pfleiderer hat seinen Schwerpunkt in der Herstellung von Holzwerkstoffen und Möbeloberflächen. Das seit über 100 Jahren bestehende Unternehmen gehört zu den größten seiner Sparte in Europa. Diese Führungs­position wird durch eine kontinuierliche Forschungs- und Entwicklungsarbeit in den unterschiedlichsten Bereichen stetig ausgebaut. In einem Projekt mit der Hochschule Rosenheim unter Beteiligung der Fakultät für Innenarchitektur mit dem Masterstudiengang Innenarchitektur, Spezialisierung Möbeldesign, sollte untersucht werden, wie flächiges, möbelgebundenes Licht im Ladenbau und Shopdesign zum Einsatz kommen kann und welche Vorteile eine solche Beleuchtung gegenüber einer üblichen architekturgebundenen Beleuchtung besitzt. Über Recherchen zu unterschiedlichen Ausgangssituationen am Point of Sale, über Beleuchtungsversuche im Maßstab 1:1 mit flächigem Licht, über Vormodelle und zuletzt über Raumprototypen im Maßstab 1:1 wurden die jeweiligen Thesen dargestellt, überprüft und bestätigt. Es zeigte sich, dass flächiges, möbelgebundenes Licht einerseits wesentlich mehr und bessere Möglichkeiten in der Beleuchtung der Ware bringt. Die präsentierten Exponate sehen schlichtweg besser aus. Auf der anderen Seite können diese leuchtenden Flächen in intelligente Steuerungen eingebaut werden, die Produktgruppen und Einzelprodukte kundenspezifisch herausstellen können. Das leuchtende und intelligente Möbel wird so zu einem wichtigen Mitspieler im Internet of Things. Die Modelle und Raumprototypen wurden in den Werkstätten der Fakultät für Innenarchitektur von den am Projekt beteiligten Studierenden selbst gebaut. KW - Innenarchitektur Licht Design Shop Kooperation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-2536 ER - TY - RPRT A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Knorr, Ludwig A1 - Hummel, Sabine T1 - Verbund zwischen Organoblech und angespritzten Strukturen T2 - Forschungsbericht 2016 der Hochschule Rosenheim N2 - Seit über zehn Jahren erforschen Wissenschaftler und Wissenschaftlerinnen der Fachrichtung Kunststofftechnik an der Hochschule Rosenheim Verbindungstechnologien und -mechanismen zwischen endlosverstärkten Thermoplasten und angespritzten Funktionsstrukturen. Besonders die Automobilindustrie hat an den neuen Möglichkeiten im Leichtbau großes Interesse. Im Projekt "OrganoRipp" untersuchte die Hochschule in Kooperation mit zwei Unternehmenspartnern neue Verbundmöglichkeiten. KW - Oranoblech KW - Faserverbundkunststoffe KW - Kunststofftechnik KW - Hybridtechnologie KW - Spritzguss Y1 - 2017 SP - 32 EP - 33 ER - TY - JOUR A1 - Hummel, Sabine A1 - Knorr, Ludwig A1 - Karlinger, Peter A1 - Schemme, Michael T1 - Eine Frage der Haftung JF - Kunststoffe N2 - Dieser Artikel gibt ein Einblick in Hinblick auf die Verarbeitung von endlosverstärkten Faserhalbzeuge, sogenannten Organobleche, in Kombination mit dem Spritzgießverfahren. Ein Schwerpunkt stellt die Verbundhaftung zwischen den beiden Komponenten dar. Neue Ergebnisse sollen die Gestaltungsrichtlinien der angespritzten Funktionselementen für derartige Bauteile führen. Die Verbundfestigkeit hängt von vielen Einflussfaktoren ab. KW - Organoblech KW - endlosverstärkung KW - Spritzguss KW - Faserverbundkunststoffe KW - Kunststoff KW - Verbundhaftung KW - Verbundfestigkeit KW - Rippen Y1 - 2017 IS - 07/2017 PB - Carl Hanser Verlag GmbH & Co. KG CY - München ER - TY - CHAP A1 - Hummel, Sabine A1 - Schemme, Michael A1 - Karlinger, Peter T1 - Haftungsuntersuchungen für Leichtbauanwendungen T2 - Technomer 2017 - 25. Fachtagung über Verarbeitung und Anwendung von Polymeren N2 - Die Verstärkung von Spritzgussteilen mit Faserhalbzeugen gewinnt immer mehr an Bedeutung. Für die Einsatztauglichkeit derartiger Bauteile ist die Verbundhaftung zwischen den angespritzten Strukturen und den Faserhalbzeugen essentiell. Der Vortrag befasst sich mit den äußeren und prozesstechnischen Einflüssen zu Erhöhung der Verbundhaftung auf Faserhalbzeugen. Zudem wird ein Einblick in die Prüf-und Anlagentechnik in diesem Bereich gegeben. KW - Organoblech KW - endlosverstärkte Faserhalbzeuge KW - Hybrithverfahren KW - Faserverbundkunststoffe KW - Faserhybride KW - Kunststoff KW - Verbundfestigkeit KW - Verbundhaftung KW - Spritzguss Y1 - 2017 ER - TY - CHAP A1 - Rieder, Rosina A1 - Krommes, Sandra A1 - Lang, Werner ED - Brotas, Luisa ED - Roaf, Susan ED - Nicol, Fergus T1 - Criticality assessment of indium for thin-film photovoltaics in the context of sustainability goals for the German housing sector T2 - PROCEEDINGS of 33rd PLEA International Conference N2 - In countries with large import dependencies, several studies on strategically important metals have classified raw materials as being critical by combining supply and vulnerability risks. In case of availability, the most critical raw materials are metallic ores and industrial minerals. Within the scope of developing resource efficient buildings, innovative building technologies, such as renewable energy systems, are becoming increasingly integral parts of buildings. Since critical raw materials are essential components in building technologies, they will also play an important role in the housing sector. In this context, it is crucial to consider how sustainability goals in the housing sector are affected by raw material criticality. This paper addresses supply and vulnerability risks of indium, which is contained in thin-film photovoltaics, in order to identify their impacts on future developments in the housing sector. Raw material availability is significantly influenced by the demand and supply of raw materials. To implement risk factors for a criticality assessment in sector-specific material flows, their impacts are analysed and modelled using a dynamic, macro-economic approach. Assuming different energy scenarios in the German housing sector up to 2050, the model reveals the raw material criticality by pointing out supply risks in order to derive recommendations. KW - criticality, raw materials, thin-film photovoltaics, indium, system dynamics Y1 - 2017 SN - 978-0-9928957-5-4 SP - 3692 EP - 3698 PB - NCEUB CY - Edinburgh ER - TY - JOUR A1 - Krommes, Sandra A1 - Schmidt, Felix ED - Calabrese, Giuseppe Giulio T1 - Business model analysis of electric mobility products and services JF - International Journal of Automotive Technology and Management IJATM N2 - The automotive value chain is experiencing significant transformation. Due to changed mobility use patterns and external conditions such as climate change, scarcity of resources and local air pollution, car manufacturers offer connectivity services and are forced to launch electric mobility. Most of the electric vehicles have additional, complementary products and services. As other market participants also engage in this field car manufacturers must decide whether they transform their business model. Therefore, the questions arise which are the determining key criteria for the business models, what are the business segments car manufacturers are engaged and how car manufacturers are preparing for the transformation. By using qualitative content analysis, key criteria for business model analysis are derived. The portfolio analysis of six car manufacturers in the German market unveils that a few car manufacturers are in an advanced state while others follow with a considerable lag, or even, are behind. KW - transformation of automobile sector; electric vehicle; electric mobility provider; additional; complementary services and products Y1 - 2017 VL - 2017 IS - Vol. 17 / No. 3 ER - TY - JOUR A1 - Werning, Hanno T1 - Die Klassenvielfalt beim Brandverhalten sinnvoll nutzen JF - FeuerTrutz Magazin N2 - Der Beitrag skizziert die Entstehung der 40 verschiedenen Klassen für das Brandverhalten nach EN 13501-1 und zeigt, wie sich die Klassifizierungskriterien gezielt mit Blick auf die Schutzziele für Abweichungsanträge nach MBO § 67 nutzen lassen, am Beispiel von echtholzfurnierten Gipsplatten. KW - Baustoffklassen KW - Brandverhalten Y1 - 2017 VL - 2017 IS - 5 SP - 16 EP - 19 PB - FeuerTrutz Network GmbH CY - Köln ER - TY - JOUR A1 - Hammerschmidt, Thomas T1 - Einflussfaktoren auf die Arzneimittelpreisbildung auf Unternehmensebene JF - Recht und Politik im Gesundheitswesen N2 - Die Entwicklung der Arzneimittelausgaben in der Gesetzlichen Krankenversicherung (GKV) ist dauerhaft ein gesundheitspolitisches Streitthema. Dabei stehen vor allem die Arzneimittelpreise neuer, patentgeschützter Medikamente im Fokus der gesundheitspolitischen Diskussion. In diesen Diskussionen wird häufig von „Mondpreisen“ gesprochen, die in keiner Relation zum Nutzen der neuen Arzneimittel stünden. Die Diskussion zwischen „Mondpreisen“ und der seitens der Arzneimittelhersteller notwendigen Preisen zur Amortisierung von Forschungs- und Entwicklungskosten greift zu kurz. Die vorliegende Analyse leistet einen Beitrag dazu, die Faktoren detaillierter zu beleuchten, die bei der Preisfindung forschender pharmazeutischer Unternehmen für neue Arzneimittel eine Rolle spielen. Die Analyse folgt dabei der Perspektive des Arzneimittelherstellers. Zum einen muss das Unternehmen die betriebswirtschaftlichen Rahmenbedingungen berücksichtigen, die eine Untergrenze für den erforderlichen Preis determinieren. Zum anderen bestimmt der Wert des Medikamentes in seinem Wettbewerbsumfeld eine Obergrenze für den Preis. Aus betriebswirtschaftlicher Perspektive lässt sich festhalten, dass die umsatzstärksten Pharmaunternehmen einen hohen Reingewinn erzielen, die Dividendenrendite von 3% eine im Gesundheitssektor hohe Profitabilität aus Sicht der Kapitalgeber ausweist. Die Pharmabranche erzielt im Vergleich zu anderen Sektoren wie der Technologiebranche oder dem Rohstoffsektor jedoch keine Überrenditen. Unternehmensseitig stellen die Marketing-, Vertriebs- und Verwaltungs- (29%), die Herstellungs- (29%) und Forschungs- und Entwicklungs- (F&E) (17%) sowie die Kapitalkosten (14%) die wesentlichen Kostenblöcke dar. Die Produktionskosten spielen in der Diskussion um Arzneimittelpreise eine untergeordnete Rolle, was bei der Größe dieses Kostenblocks erstaunt. Die vorliegende Studie ergänzt die bisherigen, häufig kritisierten Schätzungen von F&E-Kosten um einen neuen Ansatz auf Basis der in Geschäftsberichten ausgewiesenen F&E-Kosten. F&E ist geprägt durch steigende Ausgaben, lange Kapitalbindung und eine Vielzahl nicht erfolgreicher Entwicklungsprogramme – nur eines von acht klinischen Entwicklungsprogrammen führt zu einer erfolgreichen Zulassung. Die F&E-Kosten eines Arzneimittels inklusive der Weiterentwicklungen in andere Indikationsgebiete oder anderer Darreichungsformen liegen zwischen 2,2 und 3,1 Mrd. $ mit einem Mittelwert von 2,6 Mrd. $. Nur ca. 60% der Arzneimittel erwirtschaften die F&E-Kosten im Verlaufe des Produktlebenszyklus. Berücksichtigt man alle Kosten, so müsste ein Arzneimittel durchschnittlich ca. 15 Mrd. $ Umsatz über den gesamten Produktlebenszyklus erreichen, was nur von jedem vierten bis siebten Medikament erreicht wird. Die Preissetzung für neue Arzneimittel erfolgt derart, dass eine notwendige Querfinanzierung von nicht erfolgreichen Arzneimittelentwicklungen und Medikamenten mit zu niedrigem Umsatz ermöglicht wird. Neben den betriebswirtschaftlichen Rahmenbedingungen spielt letztlich für die Preisfindung der Wert des Arzneimittels im Vergleich zu relevanten Wettbewerbsprodukten die entscheidende Rolle. In der Regel ist das Wettbewerbsumfeld durch einen monopolistischen Wettbewerb geprägt. Arzneimittelhersteller berücksichtigen in rationaler Weise Produkteigenschaften, die über den patientenrelevanten Nutzen im AMNOG hinausgehen zur Preisdifferenzierung im wettbewerblichen Umfeld. Zu derartigen Produkteigenschaften zählen Verbesserung von sogenannten Surrogatendpunkten, aber auch kürzere Behandlungsdauern, weniger invasive Darreichungsformen und länger getaktete, weniger häufige Arzneimitteleinnahme, welche einen Wert des Arzneimittels aus Sicht des Patienten widerspiegeln. KW - Arzneimittelpreise KW - Pharmazeutische Industrie KW - Forschungs- und Entwicklungskosten KW - Wert von Arzneimitteln Y1 - 2017 VL - 2017 IS - 23 / 3 PB - Planimed CY - Fahrdorf ER - TY - CHAP A1 - Sigg, Ferdinand A1 - Krause, Harald T1 - Modellierung und Bewertung von strombasierten Versorgungskonzepten für hocheffiziente Gebäude T2 - Tagungsband der 21. Internationalen Passivhaustagung 2017, Wien. KW - Passivhaus KW - Plusenergiehaus KW - Gebäudesimulation KW - Energiespeicher Y1 - 2017 ER - TY - JOUR A1 - Werning, Hanno T1 - Nach vorn – in kleinen Schritten; DIN 4102-4/A1 – Stand Januar 2017 JF - Trockenbau Akustik N2 - Der Beitrag berichtet über den aktuellen Stand der Erstellung und die zu erwartenden Inhalte von E DIN 4102-4/A1 zum Zeitpunkt Januar 2017 für Trockenbaukonstruktionen. KW - Bauteilkatalog KW - Brandschutz KW - DIN 4102-4 Y1 - 2017 VL - 2017 IS - 2/2017 SP - 26 EP - 29 PB - Verlagsgesellschaft Rudolf Müller GmbH & Co. KG CY - Köln ER - TY - RPRT A1 - Hammerschmidt, Thomas T1 - Factors influencing the outcomes of the AMNOG benefit assessment N2 - Background: Since 2011, pharmaceutical companies have to proof the added benefit of new drugs in Germany. The benefit assessment is in relation to an “appropriate comparator therapy” (ACT) defined by the Federal Joint Committee (FJC). Based on the benefit assessment, a reimbursement price is negotiated. In order to proof added benefit, it is essential to provide evidence on patient-relevant outcomes from direct head-to-head comparisons with the ACT. Indirect treatment comparisons and evidence based on surrogate parameters are usually not sufficient. FJC often splits the indication into different subpopulations. Objective: The objective was to analyse whether factors beyond the clinical evidence have influence on the benefit assessment of the FJC. Methods: All benefit assessments between 2011 and 2015 were included in the analysis. The benefit for each drug was calculated by weighting the evidence grade, strength of evidence and size of subpopulations. Drugs were then clustered in high, low or no benefit. Univariate logistic regression was used to identify variables with potential influence (p<0.25). Those variables were included in a multivariate logistic regression model and variables with p>0.1 were excluded in a stepwise approach. Results: The final multivariate logistic regression identified that following variables increase the chance of getting a higher benefit: pharmacologically innovative drug, drugs in disease areas with high unmet medical need, drugs in oncology or infectious diseases, and drugs for which the FJC can split the assessment into subpopulations. Conclusions: The analysis identified variables beyond clinical evidence that influence the benefit assessment by the FJC and provided a better understanding of decision making by the FJC. T3 - Rosenheimer Beiträge - 1 KW - AMNOG, HTA, benefit assessment, pharmaceuticals, Germany KW - AMNOG KW - health technology assessment KW - pharmaceutical KW - benefit assessment KW - Germany Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-2291 ER -