TY - CHAP A1 - Versen, Martin A1 - Treichl, R. A1 - Kaltenecker, M. A1 - El Shahawy, H. A1 - Thomas, T. T. T1 - Differentielle LVDS Schnittstelle für modellbasierte Entwürfe mit MathWorks HDL Coder T2 - 15. AALE Konferenz zu Cyberphysischen Produktionssystemen, 2018 KW - LVDS Schnittstellen KW - MathWorks HDL Coder KW - Cyberphysische Produktionssysteme Y1 - 2018 SN - 978-3-8007-4522-7 PB - VDE-Verlag CY - Berlin ER - TY - CHAP A1 - Goeller, Toni A1 - Wenninger, Marc A1 - Schmidt, Jochen T1 - Towards Cost-Effective Utility Business Models - Selecting a Communication Architecture for the Rollout of New Smart Energy Services T2 - Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS N2 - The IT architecture for meter reading and utility services is at the core of new business models and has a decisive role as an enabler for resource efficiency measures. The communication architecture used by those services has significant impact on cost, flexibility and speed of new service rollout. This article describes how the dominant system model for meter reading came about, what alternative models exist, and what trade-offs those models have for rollout of new services by different stakeholders. Control of a self learning home automation system by dynamic tariff information (Real-Time-Pricing) is given as an application example. KW - Smart Meter, Advanced Metering Infrastructure, AMI Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-8332 SN - 978-989-758-292-9 SP - 231 EP - 237 PB - SciTePress ER - TY - CHAP A1 - Schneider, S. A1 - Pflaum, D. A1 - Gottschalk, L. A1 - Schulze, Achim A1 - Hüttl, B. T1 - Laborgenaue elektrische Charakterisierungen von PV-Modulen unter Feldbedingungen T2 - 1. Regenerative Energietechnik Konferenz in Nordhausen N2 - Outdoor-I-U-Messungen an Photovoltaik- (PV) - Modulen haben den Vorteil, dass Effekte wie „light soaking“ oder „light-induced degradation“ unter natürlichen Bedingungen untersucht werden können. Solche Outdoor-Analysen können unter Anwendung des Selbstreferenzierungsalgorithmus (SRA) die Zuverlässigkeit von Indoor-Flasher-Messungen erreichen. Dieses neue Konzept liefert I-UEigenschaften für wesentlich mehr Testbedingungen als vom Standard IEC 61853 gefordert und so können Schwachlichtkurven aller relevanten elektrischen I-U-Parameter für bestimmte Temperaturen erzeugt werden. Wir berichten über experimentelle Ergebnisse einer 6-tägigen Outdoor-Messkampagne an Dünnschicht-PV-Modulen. Wir evaluieren darüber hinaus die Möglichkeiten, Temperaturkoeffizienten, STC- und NOCT-Daten zu bestimmen und I-U-Kennlinien als Basis für Fitting-Analysen abzuleiten. Abschließend wird die Genauigkeit der neuen Outdoor-Methode untersucht. KW - Photovoltaik, Messtechnik, Charakterisierung von Solarmodulen Y1 - 2018 PB - RET.con 2018 CY - Nordhausen ER - TY - CHAP A1 - Krause, Harald A1 - Strobl, Thomas A1 - Wirnsberger, Markus T1 - Einfache Lüftungssysteme für Wohngebäude – Untersuchungen in einer Forschungswohnung T2 - Konferenzband Int. Passivhaustagung 2018 N2 - Besonders einfache Lüftungssysteme sind heute vor allem in der Sanierung wichtig. In einer Vielzahl von Messreihen hat sich gezeigt, dass das System der zentralen Zulufteinbringung mit Verteilung über aktive Überströmer im Hinblick auf den Schadstoffaufbau und der sich einstellenden Luftqualität ausreichend funktioniert. KW - Passivhaus KW - Wohnungslüftung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-9492 ER - TY - CHAP A1 - Botzum, Edeltraud T1 - Das Modell "Studium mit vertiefter Praxis" im Studiengang Soziale Arbeit. T2 - 11. Deutsch-Chinesisches Symposium zur anwendungsorientierten Hochschulausbildung. Hefei Universität, China (Anhui), Oktober 2018. KW - Studium mit vertiefter Praxis KW - Soziale Arbeit Y1 - 2018 ER - TY - CHAP A1 - Ragai, A1 - Schwabenbauer, A1 - Eser, A1 - Müller, ED - ASME, T1 - Effect of Process Parameters on the Electrically-Assisted Sintered Iron-Copper Powder Metals BT - Volume 2: Advanced Manufacturing T2 - ASME 2018 International Mechanical Engineering Congress and Exposition N2 - Electric-current-assisted sintering (ECAS) is a novel process that can potentially replace the conventional sintering method. It is hypothesized that the process can reduce the sintering time and can be used in situ; thus, can be more cost effective. The purpose of this research is to investigate the effect of direct current on the sintered properties of iron-copper powder metal. Experiments were conducted at various conditions to determine the optimal process parameters for this particular powder metal. The parameters investigated were electric current levels and energizing time. Experiments also included sintering the powder using a conventional furnace. Samples from both types of experiments were compared to determine the metallurgical differences due to the sintering process. Mechanical and microstructure examination were conducted to aid in determining the feasibility of ECAS. KW - Electric-current-assisted sintering Y1 - 2018 SN - 978-0-7918-5201-9 U6 - https://doi.org/10.1115/IMECE2018-86891 ER - TY - CHAP A1 - Krause, Harald T1 - Die neue Fassung der DIN 1946 Teil 6 T2 - Tagungsband Rosenheimer Fenstertage 2018 N2 - Der Lüftung von Wohnräumen und damit der Versorgung von Menschen mit guter Luftqualität wird immer noch eine relative geringe Bedeutung beigemessen. Das ist umso bemerkenswerter als wir einen Großteil unserer Lebenszeit in geschlossenen Räumen verbringen. Die gültige DIN 1946 Teil 6 regelt zum einen den nutzerun¬abhängigen Luftwechsel zum Feuchteschutz und legt zum andere Planungsvorgaben für einen hygienischen Luftwechsel fest. Die wesentliche Neuerung in dieser Norm aus dem Jahre 2009 war die verpflichtende Sicherstellung des Luftwechsels zum Feuchteschutz ohne Nutzereingriff für jeden Neubau und bei lüftungs¬technisch relevanten Sanierungen. Das Gebäude oder die Wohnung muss diesen Mindestluftwechsel von selbst sicherstellen. Reicht dazu der Infiltrationsluftwechsel durch Leckagen nicht aus, sind geeignete lüftungstech¬nische Maßnahmen zu planen und umzusetzen. Somit wurde für Wohnungen die Erstellung eines Lüftungskonzeptes nötig. In der überarbeiteten Norm wurde dieses Grund¬prinzip beibehalten. Einige der wesentlichen Änderungen sind: • Neue Berechnung der Infiltration und der Luft¬volumenströme zur Ermittlung der Notwen¬digkeit einer lüftungstechnischen Maßnahme. • Bei der Berechnung der Volumenströme werden typische Belegungsdichten der Nut-zungseinheiten berücksichtigt. • Neuaufnahme und definierte Beschreibung von kombinierten Lüftungssystemen, z.B. Kombinationen aus freier und ventilatorge-stützter Systeme. Über die Auswirkungen der neuen Berechnungs¬ansätze insbesondere auf die Fensterlüftung berichtet der Vortrag. KW - Wohnungslüftung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-13112 SP - 1 EP - 4 PB - ift Rosenheim CY - Rosenheim ER - TY - CHAP A1 - Monsberger, Christoph A1 - Lienhart, Werner A1 - Marte, Roman A1 - Hirschmüller, Sebastian ED - Sohn, Hoon T1 - Monitoring of soil nailed slope stabilizations using distributed fiber optic sensing T2 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2018 N2 - Soil nailing systems are a common way to stabilize slopes and construction pits. Their design is usually based on the mechanical equilibrium of a rigid body motion and therefore, only tensile stresses are considered and accompanying forces like bending (shear stresses) in the soil nails are neglected. Continuous strain measurements along nails could verify this assumption, but may not be performed using conventional sensing technologies. This paper reports about monitoring of a soil nailed slope stabilization using distributed fiber optic sensing. Soil nails in different anchoring horizons were instrumented and autonomously monitored over several weeks, in which the construction pit was excavated continuously. After the excavation, the final load bearing capacity of one selected nail was determined within a classical geotechnical load test. In addition to the field measurements, the bending behavior of the instrumented nail system was analyzed under laboratory conditions. The presented studies demonstrate the high potential of distributed fiber optic sensing systems and their capability to extend traditional measurement methods in foundation engineering applications. KW - Timber engineering KW - Soil nailed slope stabilizations KW - Distributed fiber optic sensing Y1 - 2018 U6 - https://doi.org/10.1117/12.2296674 VL - 10598 ER - TY - CHAP A1 - Stoettner, Julia A1 - Seliger, Norbert T1 - Ring resonator based signal and power transfer at UHF frequencies T2 - 6th International EURASIP Workshop on RFID Technology (EURFID) N2 - We present low-cost, high-efficient electromagnetic coupling between open ring geometry and a so-called butterfly structure on standard printed circuit boards (FR4) for the purpose of short range wireless data and power transfer at an UHF resonance frequency of 868 MHz. The components of the transfer system are characterized by simulation and experiments in terms of associated scattering parameters. Characterizing the efficiency of the coupled resonators, RF signal power transmission is examined for high power transfer as well as for low power DC supply utilizing a voltage doubler rectifier. With an enhanced butterfly structure coupler, unmodulated RF power transmission of 17.3 W is achieved with an efficiency of more than 95%. Furthermore, signal transmission of Pulse-Width-Modulated (PWM) signals with frequencies up to 5 MHz is demonstrated. KW - Resonators KW - electromagnetic coupling KW - UHF resonance frequency Y1 - 2018 PB - IEEE ER -