TY - JOUR A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Analysis of the phase-dependent fluorescence decay time of treated wood using FD-FLIM JF - tm - Technisches Messen N2 - For sustainable handling of wood and high material utilization, post-consumer wood has to be sorted by post-consumer wood categories in Germany. The non-destructive FD-FLIM method could improve the wood recycling process by automatic classification of waste wood into post-consumer wood classes. Thus, the phase-dependent fluorescence decay time of treated wood is analysed in this study to obtain the impact of the treatment on the fluorescence decay time. It is shown that treated and untreated wood can be differentiated using the fluorescence decay time, although the state-of-the-art theoretical fluorescence decay time differs from the experimentally determined fluorescence decay time. N2 - Für einen nachhaltigen Umgang mit Holz und eine hohe stoffliche Verwertung muss Altholz in Deutschland nach Altholzklassen sortiert werden. Die zerstörungsfreie FD-FLIM-Methode könnte den Holzrecyclingprozess durch eine automatische Klassifizierung von Altholz in Altholzklassen verbessern. Daher wird in dieser Studie die phasenabhängige Fluoreszenzabklingzeit von behandeltem Holz analysiert, um den Einfluss der Behandlung auf die Fluoreszenzabklingzeit zu ermitteln. Es wird gezeigt, dass behandeltes und unbehandeltes Holz anhand der Fluoreszenzabklingzeit unterschieden werden kann, auch wenn die nach dem Stand der Forschung theoretische Fluoreszenzabklingzeit von der experimentell ermittelten Fluoreszenzabklingzeit abweicht. KW - fluorescence KW - decay time KW - FD-FLIM KW - lifetime KW - wood Y1 - 2023 U6 - https://doi.org/10.1515/teme-2022-0114 VL - 90 IS - 6 SP - 401 EP - 406 ER - TY - GEN A1 - Ott, Holly A1 - Girata Sastoque, Lina Maria A1 - Brunsmeier, Martin A1 - Bayer, Claudia T1 - On the Cutting Edge of Wood Technology - Ensuring Sustainable Wood Flows T2 - Research in Bavaria - Spotlight KW - wood KW - sustainability KW - wood-based products Y1 - 2021 UR - https://www.research-in-bavaria.de/wood-technology ER - TY - CHAP A1 - Leiter, Nina A1 - Wohlschläger, Maximilian A1 - Auer, Veronika A1 - Versen, Martin A1 - Laforsch, Christian T1 - A Novel Approach to Identify Wood Species Optically using Fluorescence Lifetime Imaging Microscopy T2 - SMSI 2021 Conference – Sensor and Measurement Science International N2 - This contribution presents the results obtained with fluorescence lifetime imaging microscopy (FLIM)within the optical identification and differentiation of the four wood species walnut, beech, spruce, and maple. The experimental setup as well as the evaluation algorithm, with which the experiments were carried out, is explained briefly. KW - fluorescence lifetime KW - wood species identification KW - fluorescence KW - wood KW - FLIM Y1 - 2021 UR - https://doi.org/10.5162/SMSI2021/B10.2 SP - 169 EP - 170 ER -