TY - CHAP A1 - Zäh, Uwe A1 - Riedhammer, Korbinian A1 - Bocklet, Tobias A1 - Nöth, Elmar T1 - Clap Your Hands! Calibrating Spectral Subtraction for Dereverberation T2 - 2010 IEEE International Conference on Acoustics, Speech and Signal Processing(ICASSP), Dallas, TX, USA, March 2010. N2 - Reverberation effects as observed by room microphones severely degrade the performance of automatic speech recognition systems. We investigate the use of dereverberation by spectral subtraction as proposed by Lebart and Boucher and introduce a simple approach to estimate the required decay parameter by clapping hands. Experiments on small vocabulary continuous speech recognition task on read speech show that using the calibrated dereverberation improves WER from 73.2 to 54.7 for the best microphone. In combination with system adaptation, the WER could be reduced to 28.2, which is only a 16% relative loss of performance comparison to using a headset instead of a room microphone. KW - Speech Recognition KW - robustness Y1 - 2010 SP - 4226 EP - 4229 ER - TY - CHAP A1 - Zscheile, Matthias A1 - Auer, Veronika A1 - Lang, Tobias A1 - Wojaczek, Adrian A1 - Werndl, Peter T1 - Dimensionserhaltende Altholznutzung – Lösungsansatz auch oder gerade für die Holzverpacker? T2 - VERPACKERTAGE 2023 - Der Zuschnitt im Fokus KW - Altholz KW - Bioökonomie KW - Fertigungstechnik KW - Holztechnik KW - Prozesstechnologie Y1 - 2023 ER - TY - JOUR A1 - Zscheile, Matthias T1 - Holz statt Braunkohle JF - UmweltMagazin N2 - Der BioEconomy Cluster in Halle (Saale) treibt seit 2012 den Strukturwandel in der Wirtschaftsregion Südliches Sachsen-Anhalt voran. Ziel ist, dort und in angrenzenden Gebieten des mitteldeutschen Braunkohlereviers eine holzbasierte Bioökonomie voranzutreiben. KW - Bioökonomie Y1 - 2020 VL - 50 IS - 10-11 SP - 28 EP - 29 PB - VDI Fachmedien GmbH & Co. KG ER - TY - JOUR A1 - Zscheile, Matthias T1 - Holz statt Braunkohle JF - UmweltMagazin KW - Bioökonomie Y1 - 2020 VL - 50 IS - 10-11 ER - TY - RPRT A1 - Zscheile, Mathias A1 - Auer, Veronika A1 - Gilly, Alexander T1 - BioXfrac: Machbarkeitsstudie zur dezentralen Biomassekonversion durch Kombination innovativer thermo-mechanischer und biochemischer Technologien zur Gewinnung von fermentierbaren Zuckern und BioEnergie. N2 - Ziel des Vorhabens war Prüfung die Untersuchung der technischen und wirtschaftlichen Machbarkeit einer dezentralen Prozesskette zur nachhaltigen Bereitstellung von hochwertigen Grundstoffen aus bislang schwer nutzbarer Non-Food-Biomasse zur stofflichen Nutzung. Die Untersuchung erfolgt mittels der Weiterentwicklung einer mechanischen Aufschluss- und Fraktionierungstechnologie mit anschließender biochemischer Konversion. Insgesamt fanden 14 verschiedene Versuchsläufe innerhalb der Projektlaufzeit statt. In allen Ausgangsmaterialien konnten Zuckerbestandteile mit der enzymatischen Hydrolyse nachgewiesen werden. Somit konnte die technische Machbarkeit bewiesen werden. Nach dem Prinzip einer integrierten Nutzungskaskade wurden die einzelnen Komponenten miteinander verbunden. Die wirtschaftliche Machbarkeit war jedoch nur gegeben, da die Erlöse aus der Biogasanlage die Verluste in der enzymatischen Hydrolyse ausglichen. Die enzymatische Hydrolyse hätte für eine eigene Wirtschaftlichkeit höhere Zuckerausbeuten erzielen müssen. Dies konnte auch unter Verwendung verschiedener zusätzlicher Maßnahmen für keinen der Eingangsstoffe reproduzierbar bewiesen werden. Aus diesem Grund untersucht ein Teil des Konsortiums die wirtschaftliche Machbarkeit einer alternativen Aufschlusstechnologie im Anschluss an das Projekt weiter. KW - Biomassekonversion KW - Fermentation KW - enzymatische Hydrolyse Y1 - 2016 ER - TY - JOUR A1 - Zobel, M. A1 - Denzler, J. A1 - Heigl, B. A1 - Nöth, E. A1 - Paulus, D. A1 - Schmidt, Jochen A1 - Stemmer, G. T1 - MOBSY: Integration of vision and dialogue in service robots JF - Machine Vision and Applications N2 - This contribution introduces MOBSY, a fully integrated, autonomous mobile service robot system. It acts as an automatic dialogue-based receptionist for visitors to our institute. MOBSY incorporates many techniques from different research areas into one working stand-alone system. The techniques involved range from computer vision over speech understanding to classical robotics. Along with the two main aspects of vision and speech, we also focus on the integration aspect, both on the methodological and on the technical level. We describe the task and the techniques involved. Finally, we discuss the experiences that we gained with MOBSY during a live performance at our institute. KW - Service robots KW - Computer vision KW - Speech understanding and dialogue KW - Integrated System Y1 - 2003 ER - TY - JOUR A1 - Zobel, M. A1 - Denzler, J. A1 - Heigl, B. A1 - Nöth, E. A1 - Paulus, D. A1 - Schmidt, Jochen A1 - Stemmer, G. T1 - Demonstration von Bildverarbeitung und Sprachverstehen in der Dienstleistungsrobotik JF - Autonome Mobile Systeme N2 - Die typischerweise gewünschten Einsatzgebiete für Dienstleistungsroboter, z. B. Krankenhäuser oder Seniorenheime, stellen sehr hohe Anforderungen an die Mensch-Maschine-Schnittstelle. Diese Erfordernisse gehen im Allgemeinen über die Möglichkeiten der Standardsensoren, wie Ultraschalloder Infrarotsensoren, hinaus. Es müssen daher ergänzende Verfahren zum Einsatz kommen. Aus der Sicht der Mustererkennung sind die Nutzung des Rechnersehens und des natürlichsprachlichen Dialogs von besonderem Interesse. Dieser Beitrag stellt das mobile System MOBS Y vor. MOBS Y ist ein vollkommen integrierter autonomer mobiler Dienstleistungsroboter. Er dient als ein automatischer dialogbasierter Empfangsservice für Besucher unseres Instituts. MOBSY vereinigt vielfältige Methoden aus unterschiedlichsten Forschungsgebieten in einem eigenständigen System. Die zum Einsatz kommenden Methoden aus dem Bereich der Bildverarbeitung reichen dabei von Objektklassifikation über visuelle Selbstlokalisierung und Rekalibrierung bis hin zu multiokularer Objektverfolgung. Die Dialogkomponente umfasst Methoden der Spracherkennung, des Sprachverstehens und die Generierung von Antworten. Im Beitrag werden die zu erfüllende Aufgabe und die einzelnen Verfahren dargestellt. KW - Dienstleistungsroboter KW - multiokulare Objektverfolgung KW - Spracherkennung KW - Sensorik bei Robotern Y1 - 2001 ER - TY - CHAP A1 - Zobel, M. A1 - Denzler, J. A1 - Heigl, B. A1 - Nöth, E. A1 - Paulus, D. A1 - Schmidt, Jochen A1 - Stemmer, G. T1 - MOBSY: Integration of vision and dialogue in service robots T2 - Computer Vision Systems, Proceedings Second International Workshop, ICVS 2001, Vancouver, Canada N2 - MOBSY is a fully integrated autonomous mobile service robot system. It acts as an automatic dialogue based receptionist for visitors of our institute. MOBSY incorporates many techniques from different research areas into one working stand-alone system. Especially the computer vision and dialogue aspects are of main interest from the pattern recognition’s point of view. To summarize shortly, the involved techniques range from object classification over visual self-localization and recalibration to object tracking with multiple cameras. A dialogue component has to deal with speech recognition, understanding and answer generation. Further techniques needed are navigation, obstacle avoidance, and mechanisms to provide fault tolerant behavior. This contribution introduces our mobile system MOBSY. Among the main aspects vision and speech, we focus also on the integration aspect, both on the methodological and on the technical level. We describe the task and the involved techniques. Finally, we discuss the experiences that we gained with MOBSY during a live performance at the 25th anniversary of our institute KW - Speech recognition KW - Obstacle Avoidance  KW - Humanoid Robot  KW - Service Robot Y1 - 2001 ER - TY - CHAP A1 - Zinßler, T. A1 - Schmidt, Jochen A1 - Niemann, H. T1 - Point Set Registration with Integrated Scale Estimation T2 - Proceedings of the Eighth International Conference on Pattern Recognition and Image Processing (PRIP 2005), pages 116-119, Minsk, Republic of Belarus N2 - Wepresentaniterativeregistrationalgorithmfor aligning two differently scaled 3-D point sets. It extends the popular Iterative Closest Point (ICP) algorithm by estimating a scale factor between the two point sets in every iteration. The presented algorithm is especially useful for the registration of point sets generated by structure-frommotion algorithms, which only reconstruct the 3-D structure of a scene upto scale. LiketheoriginalICPalgorithm,thepresentedalgorithm requires a rough pre-alignment of the point sets. In order to determine the necessary accuracy of the pre-alignment, wehaveexperimentallyevaluatedthebasinofconvergence of the algorithm with respect to the initial rotation, translation, andscale factor between the two point sets. KW - Iterative Closest Point KW - Scale Estimation Y1 - 2005 ER - TY - CHAP A1 - Zinßer, T. A1 - Schmidt, Jochen A1 - Niemann, H. T1 - Performance Analysis of Nearest Neighbor Algorithms for ICP Registration of 3-D Point Sets T2 - Vision, Modeling, and Visualization 2003 N2 - There are many nearest neighbor algorithms tailor made for ICP,but most of them require Special input data like range Images or triangle meshes. We focus on efficient nearest neighbor algorithms that do not impose this limitation, and thus can also be used with 3-D point sets generated by structure-frommotion techniques. We shortly present the evaluated algorithms and introduce the modifications we made to improve their efficiency. In particular, several enhancements to the well-known k-D tree algorithm are described. The first part of our Performance Analysis consists of Experiments on synthetic point sets, whereas the second part features experiments with the ICP algorithm on real point sets. Both parts are completed by a thorough evaluation of the obtained results. KW - ICP Algorithm KW - 3D Point-Sets Y1 - 2003 ER - TY - CHAP A1 - Zinßer, T. A1 - Schmidt, Jochen A1 - Niemann, H. T1 - A Refined ICP Algorithm for Robust 3-D Correspondence Estimation T2 - Proceedings of the IEEE International Conference on Image Processing, volume 2, pages 695-698, Barcelona, Spain N2 - Robust registration of two 3-D point sets is a common problem in computer vision. The iterative closest point (ICP) algorithm is undoubtedly the most popular algorithm for solving this kind of problem. In this paper, we present the Picky ICP algorithm, which has been created by merging several extensions of the standard ICP algorithm, thus improving its robustness and computation time. Using pure 3-D point sets as input data, we do not consider additional information like point color or neighborhood relations. In addition to the standard ICP algorithm and the Picky ICP algorithm proposed in this paper, a robust algorithm due to Masuda and Yokoya and the RICP algorithm by Trucco et al. are evaluated. We have experimentally determined the basin of convergence, robustness to noise and outliers, and computation time of these four ICP based algorithms KW - Iterative closest point algorithm KW - Iterative algorithms KW - Noise robustnes KW - Computer vision Y1 - 2003 ER - TY - BOOK A1 - Zimmermann, J. A1 - Beneken, Gerd T1 - Verteilte Komponenten und Datenbankanbindung . Mehrstufige Architekturen mit SQLJ und Enterprise JavaBeansTM 2.0 (Allgemein: Datenbanken) N2 - Mehrstufige Architekturen mit SQLJ und Enterprise JavaBeans Datenbankanbindung und Erstellung von Komponenten sind ein essentieller Bestandteil von Java-Anwendungen. Bei Java-Schnittstellen rückt der neue ANSI-Standard SQLJ für relationale und objektrelationale Datenbanken immer mehr in den Blickpunkt. Bei mehrstufigen Architekturen ist darüber hinaus die Komponentenbildung unabdingbar, und dabei entwickelt sich EJB zu einem De-facto-Standard. Nach einer grundlegenden Einführung geht es im zweiten Teil des Buches um Java-Schnittstellen zu Datenbanken: JDBC, ODMG und SQLJ8. Wie EJB-Komponenten erstellt werden und auf Java-Datenbanken zugreifen, wird im dritten Teil beschrieben. KW - Enterprise JavaBeansTM 2.0 KW - Datenbanken KW - SQLJ Architekturen Y1 - 2000 PB - Addison-Wesley CY - München ER - TY - JOUR A1 - Zillmer, M. A1 - Karlinger, Peter A1 - Zentgraf, Peter A1 - Würtele, M. A1 - Grimm, G. A1 - Wolf, W. T1 - Vorausschauende Zylindertemperierung BT - Modellprädiktive Regelung verkürzt den Aufheizvorgang und erhöht die Energieeffizienz JF - Kunststoffe KW - Modellprädikative Regelung KW - Aufheizvorgang Y1 - 2016 IS - 10/2016 ER - TY - JOUR A1 - Ziegler, Felix A1 - Spindler, Uli T1 - An ammonia refrigerator with an absorption circuit as economizer JF - International Journal of Refrigeration KW - Refrigeration KW - absorption circuit Y1 - 1993 IS - 7/93 SP - 230 EP - 239 ER - TY - CHAP A1 - Zenz, Vitus A1 - Muscat, Dirk A1 - Strübbe, Nicole T1 - Development of a new granulate feeding system for gas pressurized extrusion processes T2 - ANTEC 2023 N2 - One major problem of a continuous process like plastic extrusion is their incapability to deal with non-local gas pressure. This is an inherent problem because a continuous process has an open end in the feeding port where pressure can escape. In this study a novel feeding system was developed to enable granulate feeding into gas pressurized processes inside a single- or twin-screw extruder. With this apparatus gas pressure can be applied inside the extrusion process. The apparatus separates the pressurized extruder from the dosing equipment that feeds the extruder. It keeps the pressure inside the system while continuously feeding new material into the process. A small-scale prototype was designed for proof-of concept. The small size of the prototype was able to handle small amounts of granulates of around 100 - 200 g/h. An applied gas pressure of 8 bar was achieved. In future optimizations, throughput can be increased and maximum applied gas pressure towards 15-20 bar. KW - Plastic feeding KW - Granulate KW - Extrusion KW - Compounding KW - Reactive Extrusion Y1 - 2023 PB - SPE ANTEC ER - TY - JOUR A1 - Zenz, Vitus A1 - Muscat, Dirk A1 - Strübbe, Nicole T1 - So wird Bernsteinsäure aus Holzreststoffen gewonnen JF - Plastverarbeiter N2 - Die effiziente Umwandlung von lignocellulosehaltiger Biomasse wie Restholz ist eine wissenschaftliche sowie technologische Herausforderung weltweit. Die Technische Hochschule Rosenheim entwickelt gemeinsam mit Partnern ein neues Verfahren zur Herstellung von Bernsteinsäure aus Holzreststoffen. KW - Bernsteinsäure KW - Reaktive Extrusion Y1 - 2023 VL - 2023 IS - 04 SP - 22 EP - 25 PB - Hüthig GmbH CY - Heidelberg ER - TY - CHAP A1 - Zentgraf, Peter A1 - Reggio, D. T1 - MAGNETIC RATE DAMPING FOR SATELLITES IN LEO T2 - 32nd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE N2 - This article deals with the topic of damping the rates of a satellite after separation from the launcher by sensing the rates with magnetometers or gyroscopes and actually damping it with torquerods or thrusters. In literature problems of this kind are treated by linearization which is not adequate here due to the high nonlinearity of the problem caused by the high gyroscopic torque. This paper addresses the observability and controllability of the rate dynamics for symmetric satellite bodies. Furthermore, robust stability of any bodies is investigated by means of the Krasovskii–LaSalle principle which is a variant of Ljapunov’s Second Method. It is found that – apart from one exception - the system is robustly stable for certain conditions depending only on the gain matrix and not depending on the orbit, moments of inertia or initial conditions. The exception is that of the intuitive case of an equator type orbit, in which the satellite rotates around the magnetic field lines, in this case the satellite’s rate cannot be damped. Several design configurations are analysed with respect to their performance and cost: Rate damping with magnetometers or gyroscopes as sensors, and torquerods and thrusters as actuators. The results are evaluated with respect to the time to reach the desired rate, the propellant and the power equivalent battery mass used. The goal is to use the results to allow an AOCS equipment and architecture trade-off at an early project phase. The design of the rate damping control of the SWARM project is presented as an example and demonstrated with simulations. KW - Magnetic Rate Damping KW - Satellites KW - symmetric satellite bodies Y1 - 2018 ER - TY - JOUR A1 - Zentgraf, Peter A1 - Huber, Michaela T1 - Störgrößenkompensation in geregelten Systemen - Eine einfache Methode T1 - Compensating for disturbances in control systems - Demonstrating the practical benefits of a simple method JF - atp magazin N2 - Ein gutes Modell der Regelstrecke erhöht die Erfolgsaussicht, eine in der Simulation gut funktionierende Regelung in der Praxis genauso gut betreiben zu können. Gute Modelle eröffnen auch noch weitere Perspektiven: Sind die störenden Einflüsse auf den Regelkreis, die Störgrößen, die Messfehler und die Ungenauigkeiten im Simulationsmodell insgesamt kleiner als die Genauigkeitsanforderungen an die Regelgröße, dann kann man durch entsprechende Filterung des Eingangssignals sogar auf eine Rückführung der Regelgröße sogar verzichten. Andernfalls lassen sich deren Auswirkung auf die Regelgröße durch eine Rückführung verkleinern. Der Prozess kann für schnelle und hochgenaue Anwendungen durch die vorgestellte Methode weiter verbessert werden, wenn die störenden Einflüsse auf den Regelkreis direkt geschätzt und gleich kompensiert werden, bevor sie sich in der Regelgröße bemerkbar machen können. N2 - Control design engineers prefer precise models of a plant because these increase the chances to successfully transfer the design from simulation to reality. Furthermore, if the influence of disturbances, the noise content of the signals, and the model inaccuracy are small enough, then an open loop control might be sufficient. Otherwise, a feedback control loop is required to reduce the impact of the disturbances on the controlled variable. Using the method presented here, the time needed to reduce the impact during the process can be shortened significantly by directly estimating and compensating for the effects caused by disturbances and noise before these become noticeable in the controlled variable. KW - Regelstrecke KW - Regelkreis Y1 - 2022 VL - 2022 IS - 04 ER - TY - GEN A1 - Zentgraf, Peter A1 - Erb, S. ED - Zentgraf, Peter T1 - IMPACT OF ELECTRIC PROPULSION UNCERTAINTY ON ORBIT PREDICTION N2 - This paper analyses the achievable performance of the orbit prediction for a geostationary satellite using clusters of electrical propulsion (EP) thrusters for station-keeping and a star tracker based attitude control system. The challenge in the orbit prediction is that the real electrical propulsion thrust is known with limited accuracy only. In combination with thrust pointing errors, these inaccuracies can accumulate to large orbit position errors during long low thrust burn arcs. The discrepancy between real and predicted satellite position is determined in terms of probability and as a worst case scenario. KW - Orbit prediction KW - Electric propulsion KW - Satellite position Y1 - 2018 ER - TY - JOUR A1 - Zentgraf, Peter A1 - Bernatzky, Andreas A1 - Hager, Ralf A1 - Heigl, Martin A1 - Huber, Michaela A1 - Vogl, Georg A1 - Wolf, Christopher A1 - Zeitler, Adrian T1 - Hagelnavigator RO-BERTA für ein Hagelabwehrflugzeug JF - CRISIS PREVENTION Das Fachmagazin für Gefahrenabwehr, Innere Sicherheit und Katastrophenhilfe KW - Hagel Y1 - 2021 VL - 2021 IS - 2 SP - 38 EP - 40 ER - TY - CHAP A1 - Zentgraf, Peter A1 - Berge, S. A1 - Edfors, A. A1 - Olsson, T. A1 - Pionnier, G. A1 - Björk, M. A1 - Chasset, C. A1 - Nordebäck, T. A1 - Rieschel, M. A1 - Lübke- Ossenbeck, B. T1 - Advanced AOCS Design on the First Small GEO Telecom Satellite T2 - 60th International Astronautical Congress, Oct. 12 -16, 2009, Daejon, South Korea N2 - The advanced Attitude and Orbit Control System (AOCS) design of the Small GEO platform is now being adapted for the first commercial mission. The Small GEO telecommunications satellite is a new development to fill a niche in the telecom industry for small platforms weighing about 1.5 tonnes and targeting payloads of 300 kg and 3 kW. The first mission will launch into Geostationary Transfer Orbit (GTO). Small GEO is being developed by a Consortium led by OHBSystem AG. The Swedish Space Corporation is a partner in the Consortium and supplies the AOCS and Electric Propulsion (EP) subsystems. The project is currently in Phase C and the first mission will fly in 2012. This article gives an overview of the AOCS development status. The AOCS architecture is a three-axis stabilized system using reaction wheels for attitude control, star trackers for attitude determination, and EP for orbit control. The AOCS software is being developed using model-based design techniques and test driven development. Results from subsystem level testing of flight code will be presented. The AOCS design is characterized by a number of advances in technology beyond traditional telecom satellite designs. Perhaps the largest deviation from a traditional design is complete reliance on EP for orbit control. Angular momentum management of the reaction wheels relies solely upon EP in the nominal modes. The EP is not used in the safe modes and therefore a cold gas system is included On-board. The cold gas system uses Xenon, the same fuel used by the EP. Another advance is the reliance upon APS-based star trackers. APS (Active Pixel Sensor) star trackers have a number of advantages over their CCD-based cousins in terms of robustness. The traditional fine sun sensor is simplified to a fault tolerant system of solar cells giving low, but more than adequate, accuracy. In addition, a GPS sensor will be flown on-board as an experiment. KW - AOCS (Attitude and orbit control system) design KW - Small Geo Telecom Satellite Y1 - 2018 ER - TY - CHAP A1 - Zentgraf, Peter A1 - Berge, S. A1 - Chasset, C. A1 - Filippi, H. A1 - Gottzein, E. A1 - Gutiérrez-Cañas, I. A1 - Hartrampf, M. A1 - Krauss, P. A. A1 - Kuehl, C. A1 - Lübke- Ossenbeck, B. A1 - Mittnacht, M. A1 - Montenbruck, O. A1 - Müller, C. A1 - Rueda Boldo, P. A1 - Truffi, A. ED - American Astronautical Society, T1 - PREPARING THE GPS-EXPERIMENT FOR THE SMALL GEO MISSION T2 - 33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE N2 - This paper deals with the preparation of the Small GEO mission and the accommodation of a GPS receiver as an experiment. The expected benefits of using the GPS receiver for Small GEO are explained. The feasibility of using GPS for position determination is investigated by simulation using a MosaicGNSS receiver, which was stimulated by a Spirent RF signal generator. A procedure, how to evaluate flight data on ground is outlined. Success criteria of the experiment and the minimal size of the downlink stream required and reserved for the receiver TM are presented. KW - GPS KW - geosynchronous mission KW - Small GEO telecommunications satellite Y1 - 2018 ER - TY - CHAP A1 - Zentgraf, Peter T1 - ANALYTICAL ATTITUDE DETERMINATION FROM A SPECIFIC RATE PROFILE T2 - 40th ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE, Breckenridge, Colorado, USA N2 - The problem dealt with in this paper is the analytical determination of the attitude of a rigid body which undergoes a given rate profile. Usually the attitude is determined by solving the kinematic differential equation numerically. For long lasting movements the outcome can cost computation time plus encountered losses in accuracy, which can be disturbing especially in optimization problems. This contribution solves the kinematic differential equation for certain rate profiles exactly and compares the results in accuracy and computation time with the standard procedures. KW - Attitude determination KW - kinematic differential equation KW - satellites Y1 - 2017 ER - TY - CHAP A1 - Zentgraf, Peter T1 - Generieren einer Streckenübertragungsfunktion aus gemessenen Ein-/Ausgangsdaten T2 - AALE 2019 - 16. Fachkonferenz "Autonome und intelligente Systeme in der Automatisierungstechnik" 28.02.2019 - 01.03.2019 in Heilbronn, Deutschland N2 - Zur Lösung einer regelungstechnischen Entwurfsaufgabe benötigt man ein Simulationsmodell der Regelstrecke. Entweder benötigt man es, weil es die meisten Entwurfsverfahren zur Bestimmung der Reglerparameter als gegeben voraussetzen oder weil man das Verhalten des Regelkreises zur Verifikation des gewünschten Verhaltens gefahrlos simulieren möchte, bevor man den Regler in dem realen geschlossenen Regelkreis verwendet. Die Motivation zur Entwicklung des hier vorgestellten Verfahrens ist es, Bachelor-Studenten der Ingenieurswissenschaften aus dem höheren Semester, die zum ersten Mal mit Regelungstechnik in Berührung kommen, ein möglichst allgemein anwendbares Verfahren zur Bildung von Streckenübertragungsfunktionen an die Hand zu geben, das von der Theorie her vollständig transparent und allein mit dem aus der Mathematik bisher Gelernten „verstehbar“ für sie ist. Grundsätzlich gibt es zwei verschiedene Arten, ein Simulationsmodell der Regelstrecke zu gewinnen: Bei der physikalischen oder theoretischen Modellbildung werden physikalische Erhaltungssätze auf den idealisierten sprich vereinfachten technischen Vorgang angewendet und nach den gewählten Ein- bzw. Ausgangssignalen umgeformt. Diese Vorgehensweise kann sehr zeitaufwendig sein und hinzukommt, dass Parameter des Modells meist unbekannt sind. Bei der experimentellen Modellbildung geht man von einem gemessenen Ein- bzw. Ausgangssignal aus und gleicht über mehr oder weniger aufwändige Optimierungsverfahren die simulierte Antwort an die gemessene Antwort an. KW - Regelungstechnik Y1 - 2019 ER - TY - JOUR A1 - Zentgraf, Peter T1 - Ein neues Verfahren zur Modellierung linearer Systeme - Experimentelle Modellbildung mit Ein- und Ausgangsdaten T1 - A new method for modelling linear systems - Experimental modelling using input/output data JF - atp magazin N2 - Es wird ein Verfahren zum Simulieren von Vorgängen vorgestellt, das auf der Messung des Eingriffs in ein reales System und dessen gemessener Reaktion beruht. Das Verfahren ist vollständig transparent, denn die notwendigen theoretischen Voraussetzungen zum Verständnis des Verfahrens bestehen nur aus Lehrinhalten aus dem Bachelorstudium für Ingenieure: das Lösen linearer DGLs mit konstanten Koeffizienten, die Laplace-Transformation und die Methode der kleinsten Quadrate. Es kommt ohne nichtlineare Optimierer oder Iterationen aus, weil die Lösung in zwei analytischen Gleichungen ausgedrückt werden kann. Das Verfahren hat in der Praxis ein großes Einsatzspektrum, denn es ist auf stabile und instabile Systeme mit und ohne Dämpfung anwendbar. Für die Wahl des Eingangssignals gibt es keine Einschränkung und die Anfangsbedingungen können mitgeschätzt werden. Das Verfahren kann im offenen und im geschlossenen Regelkreis eingesetzt werden. N2 - A novel method is presented for simulating technical processes on the basis of measured reaction of a system excited by a known input signal. The method is fully transparent and involves only linear differential equations, Laplace transformations, and the least squares method. There is no need for a nonlinear optimizer or an algorithm requiring iterations, and the solutions can be expressed by two linear matrix equations. The method can be used for a wide range of practical applications because the initial conditions can also be estimated it is applicable for stable or unstable systems, for open or closed loop systems and for dynamic processes in progress. KW - Experimentelle Modellbildung KW - Simulation KW - Lineare DGL KW - Einfachheit KW - experiment-based modelling KW - simulation KW - linear differential equations KW - simplicity Y1 - 2019 VL - 2019 IS - 11/12 ER - TY - CHAP A1 - Zentgraf, Peter T1 - Non-Rest to non-Rest Reference Slews for Agile Imaging Satellites With LQ-minimized Angular Momentum T2 - AIAA SCITECH 2023 Forum N2 - This paper shows a full parametrization non-rest to non-rest slew maneuvers using polynomials. A new modelling formulation is developed which on one hand satisfies exactly the given boundary conditions as well as the kinematic differential equation of the rotating body exactly. The idea is to determine one part of the unknown coefficients by the kinematical boundary conditions and to use the other part as free design parameters to shape the dynamic in between the boundary conditions. In addition, a least squares problem is formulated in order to minimize the angular momentum of the slew. This approach allows optimal slew maneuvers as well as low computational need such that an onboard usage is possible. Y1 - 2023 U6 - https://doi.org/10.2514/6.2023-2173 ER - TY - CHAP A1 - Zenger, A. A1 - Schmidt, Jochen A1 - Krödel, M. T1 - Towards the Intelligent Home: Using Reinforcement-Learning for Optimal Heating Control T2 - Advances in Artificial Intelligence, Proceedings of the 36th Annual Conference on AI, volume 8077 of Lecture Notes in Artificial Intelligence N2 - We propose a reinforcement learning approach to heating control in home automation, that can acquire a set of rules enabling an agent to heat a room to the desired temperature at a defined time while conserving as much energy as possible. Experimental results are presented that show the feasibility of our method. KW - Target Temperature KW - Reward Function KW - Heating control KW - Home Automation KW - Approximate dynamic program Y1 - 2013 PB - Springer ER - TY - JOUR A1 - Zeng, Li A1 - Kellner, Florian A1 - Lienland, Bernhard T1 - Rucksackprobleme in der Praxis - schnelle Entscheidungen schwer gemacht JF - HMD - Praxis der Wirtschaftsinformatik N2 - Unternehmen sind häufig mit Situationen konfrontiert, in denen schnell Entscheidungen bezüglich der Auswahl mehrerer Handlungsalternativen gefunden werden müssen. Mathematische Verfahren können hierbei unterstützen, z. B. für die Ermittlung einer ersten Diskussionsbasis. Verfügbare Softwarelösungen errechnen zwar häufig optimale Ergebnisse, zeigen jedoch Schwächen bei der praktischen Anwendbarkeit. So ist eine Einarbeitung in komplexe Optimierungssoftware für die teilweise sporadisch auftretenden Probleme in der Regel für Unternehmen nicht möglich, unter anderem auch unter Anbetracht der teilweise hohen Kosten der Standardsoftware und dem benötigten hohen Einarbeitungsaufwand. Gerade Problemstellungen in Fachbereichen, die nicht auf mathematische Problemlösung spezialisiert sind, münden daher regelmäßig in Ineffizienzen. Basierend auf den in der Literatur diskutierten Lösungsansätzen wurde ein praxisorientierter Ansatz zur Entscheidungsunterstützung für Rucksackprobleme bzw. 0–1 Probleme mithilfe von Genetischen Algorithmen (GA) entwickelt und technisch in Microsoft Excel® umgesetzt. Ein Praxistest bei einem chinesischen Textilunternehmen belegt erhöhte Effektivität und Effizienz. Die Software kann kostenfrei nach MIT Lizenz unter http://www.solvega.de/ heruntergeladen werden. Y1 - 2016 U6 - https://doi.org/10.1365/s40702-016-0207-z VL - 53 IS - 3 SP - 310 EP - 322 ER - TY - CHAP A1 - Zeller, Marc A1 - Höfig, Kai A1 - Schwinn, Jean-Pascal T1 - ArChes—Automatic generation of component fault trees from continuous function charts T2 - 2017 IEEE 15th International Conference on Industrial Informatics (INDIN), July 2017, Emden, Germany. N2 - The growing size and complexity of software in embedded systems poses new challenges to the safety assessment of embedded control systems. In industrial practice, the control software is mostly treated as a black box during the system's safety analysis. The appropriate representation of the failure propagation of the software is a pressing need in order to increase the accuracy of safety analyses. However, it also increase the effort for creating and maintaining the safety analysis models (such as fault trees) significantly. In this work, we present a method to automatically generate Component Fault Trees from Continuous Function Charts. This method aims at generating the failure propagation model of the detailed software specification. Hence, control software can be included into safety analyses without additional manual effort required to construct the safety analysis models of the software. Moreover, safety analyses created during early system specification phases can be verified by comparing it with the automatically generated one in the detailed specification phased. KW - Industrial Informatics KW - CFT KW - Function charts Y1 - 2017 ER - TY - CHAP A1 - Zeller, Marc A1 - Höfig, Kai T1 - INSiDER: Incorporation of system and safety analysis models using a dedicated reference model T2 - 2016 Annual Reliability and Maintainability Symposium (RAMS) N2 - In order to enable model-based, iterative design of safety-relevant systems, an efficient incorporation of safety and system engineering is a pressing need. Our approach interconnects system design and safety analysis models efficiently using a dedicated reference model. Since all information are available in a structured way, traceability between the model elements and consistency checks enable automated synchronization to guarantee that information within both kind of models are consistent during the development life-cycle. KW - Safety KW - CFT Y1 - 2016 SP - 1 EP - 6 ER - TY - CHAP A1 - Zeitler, Berndt A1 - Schneider, Martin A1 - Höller, Christoph A1 - Schanda, Ulrich T1 - Tieffrequenter Trittschall – Stand der Wissenschaft und Technik T2 - Fortschritte der Akustik - DAGA KW - Trittschall KW - TiefeFrequenzen Y1 - 2020 ER - TY - CHAP A1 - Zehetmayr, Robert A1 - Rabold, Andreas A1 - Châteauvieux-Hellwig, Camille T1 - Schalltechnische Prognose von Trennbauteilen mit VBAcoustic T2 - Fortschritte der Akustik - DAGA Y1 - 2019 SN - 978-3-939296-14-0 ER - TY - CHAP A1 - Zahoransky, Richard A1 - Mühlbauer, Wolfgang A1 - König, Hartmut ED - IEEE, T1 - Towards Mobility Support in Edge Clouds T2 - 2020 IEEE Cloud Summit N2 - Mobile-access edge clouds provide distributed com-pute capacities for low-latency applications. 5G technology willpave the way for such mobile deployment scenarios. In thispaper, we propose an edge cloud infrastructure that supportslow-latency video analysis connected with bandwidth reductionfor a moving group of persons. As example, we consider a mobilebody camera scenario that monitors the situation in a certain areaand transmits it to an operations center. Our discussion focuseson three aspects: mobility support, low-latency video processing,and bandwidth reduction. For this, we propose a mobile edgecloud infrastructure with a central cloud. In order to optimizevideo processing we optimize the edge cloud device assignmentof the cameras depending on their movement by reassigning itto another cloud device. This requires live migration of ongoingvideo analysis between edge devices. Finally we discuss the useof a mobile central cloud. KW - edge cloud KW - mobile-access edge computing KW - 5G KW - body cameras KW - edge device migration Y1 - 2020 UR - https://doi.org/10.1109/IEEECloudSummit48914.2020.00014 SP - 1 EP - 6 PB - IEEE Xplore ER - TY - CHAP A1 - Yeap, W.K. A1 - Wong, C.K. A1 - Schmidt, Jochen T1 - Using a Mobile Robot to Test a Theory of Cognitive Mapping. T2 - Robotics and Cognitive Approaches to Spatial Mapping, Springer Tracts in Advanced Robotics N2 - This paper describes using a mobile robot, equipped with some sonar sensors and an odometer, to test navigation through the use of a cognitive map. The robot explores an office environment, computes a cognitive map, which is a network of ASRs [36, 35], and attempts to find its way home. Ten trials were conducted and the robot found its way home each time. From four random positions in two trials, the robot estimated the home position relative to its current position reasonably accurately. Our robot does not solve the simultaneous localization and mapping problem and the map computed is fuzzy and inaccurate with much of the details missing. In each homeward journey, it computes a new cognitive map of the same part of the environment, as seen from the perspective of the homeward journey. We show how the robot uses distance information from both maps to find its way home. KW - Cognitive Mapping KW - Mobile Robot KW - Simultaneous Localization  Y1 - 2008 PB - Springer CY - Berlin ER - TY - CHAP A1 - Yeap, W.K. A1 - Wong, C.K. A1 - Schmidt, Jochen T1 - Initial Experiments with a Mobile Robot on Cognitive Mapping T2 - International Symposium on Practical Cognitive Agents and Robots (PCAR 2006), pages 221-230, Perth, Australia N2 - This paper shows how a mobile robot equipped with sonar sensors and an odometer is used to test ideas about cognitive mapping. The robot first explores an office environment and computes a "cognitive map" which is a network of ASRs [1]. The robot generates two networks, one for the outward journey and the other for the journey home. It is shown that both networks are different. The two networks, however, are not merged to form a single network. Instead, the robot attempts to use distance information implicit in the shape of each ASR to find its way home. At random positions in the homeward journey, the robot calculates its orientation towards home. The robot's performances for both problems are evaluated and found to be surprisingly accurate. KW - Mobile Robot KW - Cognitive Mapping Y1 - 2006 ER - TY - JOUR A1 - Yang, Soohyun A1 - Büttner, Olaf A1 - Kumar, Rohini A1 - Jäger, Christoph G. A1 - Jawitz, James W. A1 - Rao, P.S.C. A1 - Borchardt, Dietrich T1 - Spatial patterns of water quality impairments from point source nutrient loads in Germany's largest national River Basin (Weser River) JF - Science of The Total Environment N2 - We employed the well-established Horton-Strahler, hierarchical, stream-order (ω) scheme to investigate scaling of nutrient loads (P and N) from ~845 wastewater treatment plants (WWTPs) distributed along the river network in urbanized Weser River, the largest national basin in Germany (~46K km2; ~8.4 million population). We estimated hydrologic and water quality impacts at the reach- and basin-scales, at two steady river discharge conditions (median flow, QR50; low-flow, QR90). Of the five WWTPs class-sizes (1 ≤ k ≤ 5), ~68% discharge to small low-order streams (ω < 3). We found large variations in capacity to dilute WWTP nutrient loads because of variability in (1) treated wastewater discharge (QU) within and among different class-sizes, and (2) river discharge (QR) within low-order streams (ω < 3) resulting from differences in drainage areas. For QR50, reach-scale water quality impairment assessed by nutrient concentration was likely at 136 (~16%) locations for P and 15 locations (~2%) for N. About 90% of these locations were lower-order streams (ω < 3). At QR50 and only with dilution, basin-scale cumulative nutrient loads from multiple upstream WWTPs increase impaired locations to 266 (~32% of total) for P. Considering in-stream uptake decreased P-impaired streams to 225 (~27%), suggesting the dominant role of dilution in the Weser River basin. Role of in-stream uptake diminished along the flow paths, while dilution in larger streams (4 ≤ ω ≤ 7) minimizes the impact of WWTP loads. Under QR90 conditions [(QR50/QR90) ~ 2.5], water quality impaired locations will likely double for the basin-scale analyses. Long-term water quality data suggested that diffuse sources are the primary contributors for water quality impairments in large streams. Our data-modeling synthesis approach is transferable to other urbanized river basins and extends understanding of point source impacts on water quality across spatial scales. KW - Point source nutrient loads KW - Dilution KW - In-stream nutrient uptake KW - Eutrophication KW - Hydrological alteration Y1 - 2019 UR - https://doi.org/10.1016/j.scitotenv.2019.134145 VL - 697 ER - TY - CHAP A1 - Wörthmann, Mario A1 - Lindner, Johannes A. A1 - Briesen, Heiko ED - Dechema, T1 - Gezieltes Einstellen der Schutzwirkung homogener Schmelzcoatings T2 - Jahrestreffen der ProcessNet-Fachgruppen Lebensmittelverfahrenstechnik, Mischvorgänge und Grenzflächenbestimmte Systeme und Prozesse 2021 Y1 - 2023 ER - TY - CHAP A1 - Wong, C.K. A1 - Yeap, W.K. A1 - Schmidt, Jochen T1 - Our Next Generation of Robotics Researchers? Teaching Robotics at Primary School Level. T2 - Readings in Technology and Education: Proceedings of International Conference on Information Communication Technologies in Education N2 - In this paper, we present our experience in designing and teaching of our first robotics course for students at primary school level. The course was carried out over a comparatively short period of time, namely 6 weeks, 2 hours per week. In contrast to many other projects, we use robots that researchers used to conduct their research and discuss problems faced by these researchers. Thus, this is not a behavioural study but a hands-on learning experience for the students. The aim is to highlight the development of autonomous robots and artificial intelligence as well as to promote science and robotics in schools. KW - Robotic Research KW - Teaching Robotics KW - Software Development Y1 - 2009 ER - TY - CHAP A1 - Wong, C.K. A1 - Yeap, W.K. A1 - Schmidt, Jochen T1 - Using a Mobile Robot for Cognitive Mapping T2 - International Joint Conference on Artificial Intelligence (IJCAI), pages 2243-2248, Hyderabad, India, 2007 N2 - When animals (including humans) first explore a new environment, what they remember is fragmentary knowledge about the places visited. Yet, they have to use such fragmentary knowledge to find their way home. Humans naturally use more powerful heuristics while lower animals have shown to developa varietyof methodsthat tend to utilize two key pieces of information,namely distance and orientation information. Their methods differ depending on how they sense their environment. Could a mobile robot be used to investigate the nature of such a process, commonly referred to in the psychological literature as cognitive mapping? What might be computed in the initial explorations and how is the resulting “cognitive map” be used to return home? In this paper, we presented a novel approach using a mobile robot to do cognitive mapping. Our robot computes a “cognitive map” and uses distance and orientation information to find its way home. The process developed provides interesting insights into the nature of cognitive mapping and encourages us to use a mobile robot to do cognitive mapping in the future, as opposed to its popular use in robot mapping. KW - Cognitive Mapping KW - Sonar Sensor KW - Robotic Research Y1 - 2007 ER - TY - CHAP A1 - Wong, C.K. A1 - Yeap, W.K. A1 - Schmidt, Jochen T1 - Computing a Network of ASRs Using a Mobile Robot Equipped with Sonar Sensors T2 - International Conference on Robotics, Automation, and Mechatronics (RAM), pages 57-62, Bangkok, Thailand N2 - This paper presents a novel algorithm for computing absolute space representations (ASRs) in Yeap, W.K. and Jefferies, M. (1988) for mobile robots equipped with sonar sensors and an odometer. The robot is allowed to wander freely (i.e. without following any fixed path) along the corridors in an office environment from a given start point to an end point. It then wanders from the end point back to the start point. The resulting ASRs computed in both directions are shown KW - Robotics KW - Automation and Mechatronics Y1 - 2006 ER - TY - CHAP A1 - Wolters, Maren A1 - Scheck, Jochen A1 - Drechsler, Andreas A1 - Schanda, Ulrich T1 - Psychoakustische Beurteilung der Trittschallübertragung einer Massivtreppe T2 - Fortschritte der Akustik - DAGA KW - Trittschall KW - Massivbau KW - Psychoakustik KW - Treppen Y1 - 2020 ER - TY - CHAP A1 - Wolfgang, E. A1 - Lefranc, G. A1 - Seliger, Norbert A1 - Berg, H. A1 - Licht, T. T1 - Zuverlässige Leistungselektronik für die Automobiltechnik T2 - ETG-Tagung Bauelemente der Leistungselektronik und ihre Anwendungen KW - Power electronics Y1 - 2023 PB - ETG CY - Bad Nauheim ER - TY - CHAP A1 - Wolfgang, E A1 - Seliger, Norbert A1 - Lugert, G A1 - Riepl, T T1 - High-temperature power electronics: challenges and opportunities T2 - Proceedings of the 2nd International Conference on Integrated Power Systems (CIPS) Y1 - 2023 SP - 43 EP - 51 ER - TY - JOUR A1 - Wolf, Sarah A1 - Hacker, Bernd T1 - Empirische Analyse der Nachhaltigkeitsberichterstattung in Österreich JF - Zeitschrift für Internationale Rechnungslegung (IRZ) N2 - Für viele Unternehmen ist eine nachhaltige Unternehmensführung inzwischen ein fixer Bestandteil der Unternehmenspolitik. Um neben den finanziellen auch nichtfinanzielle Informationen aufzuzeigen, veröffentlichen Unternehmen einen Nachhaltigkeitsbericht. Die EU reguliert und verpflichtet die Nachhaltigkeitsberichterstattung bereits durch die EURichtlinie 2014/95/EU „Non-Financial Reporting Directive“. In Österreich wurde die Richtlinie durch das Nachhaltigkeits- und Diversitätsverbesserungsgesetzes (NaDiVeG) in nationales Recht umgesetzt. Die bisherigen Regelungen sind jedoch bereits überholt und werden ab dem Jahr 2023 durch die „Corporate Sustainability Reporting Directive“ (CSRD) erweitert, die die Nachhaltigkeitsberichterstattung transparenter, standardisierter und vergleichbarer gestalten soll. Inwieweit sind die ATX-Unternehmen auf die Neuerungen der CSRD vorbereitet, und wo gibt es Handlungsbedarf? Diese und weitere Fragen klärt die vorliegende empirische Analyse und zeigt den aktuellen Stand der Nachhaltigkeitsberichterstattung in Österreich. KW - Nachhaltigkeitsberichte KW - Nichtfinanzielle Berichterstattung KW - CSR-Berichterstattung KW - CSRD KW - Lagebericht KW - Doppelte Wesentlichkeit Y1 - 2022 VL - 17 IS - 12 SP - 511 EP - 519 PB - Beck CY - München ER - TY - JOUR A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Löder, Martin G. J. A1 - Laforsch, Christian T1 - Identification of different plastic types and natural materials from terrestrial environments using fluorescence lifetime imaging microscopy. JF - Analytical and Bioanalytical Chemistry N2 - Environmental pollution by plastics is a global issue of increasing concern. However, microplastic analysis in complex environmental matrices, such as soil samples, remains an analytical challenge. Destructive mass-based methods for microplastic analysis do not determine plastics’ shape and size, which are essential parameters for reliable ecological risk assessment. By contrast, nondestructive particle-based methods produce such data but require elaborate, time-consuming sample preparation. Thus, time-efficient and reliable methods for microplastic analysis are needed. The present study explored the potential of frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) for rapidly and reliably identifying as well as differentiating plastics and natural materials from terrestrial environments. We investigated the fluorescence spectra of ten natural materials from terrestrial environments, tire wear particles, and eleven different transparent plastic granulates <5 mm to determine the optimal excitation wavelength for identification and differentiation via FD-FLIM under laboratory conditions. Our comparison of different excitation wavelengths showed that 445 nm excitation exhibited the highest fluorescence intensities. 445 nm excitation was also superior for identifying plastic types and distinguishing them from natural materials from terrestrial environments with a high probability using FD-FLIM. We could demonstrate that FD-FLIM analysis has the potential to contribute to a streamlined and time-efficient direct analysis of microplastic contamination. However, further investigations on size-, shape-, color-, and material-type detection limitations are necessary to evaluate if the direct identification of terrestrial environmental samples of relatively low complexity, such as a surface inspection soil, is possible. KW - FD-FLIM KW - Fluorescence lifetime KW - Microplastic contamination KW - Microplastic in soils KW - Plastic identification KW - Terrestrial pollution Y1 - 2024 U6 - https://doi.org/10.1007/s00216-024-05305-w ER - TY - JOUR A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Löder, Martin G. J. A1 - Laforsch, Christian T1 - A promising method for fast identification of microplastic particles in environmental samples: A pilot study using fluorescence lifetime imaging microscopy JF - Heliyon N2 - Microplastic pollution of the environment has been extensively studied, with recent studies focusing on the prevalence of microplastics in the environment and their effects on various organisms. Identification methods that simplify the extraction and analysis process to the point where the extraction can be omitted are being investigated, thus enabling the direct identification of microplastic particles. Currently, microplastic samples from environmental matrices can only be identified using time-consuming extraction, sample processing, and analytical methods. Various spectroscopic methods are currently employed, such as micro Fourier-transform infrared, attenuated total reflectance, and micro Raman spectroscopy. However, microplastics in environmental matrices cannot be directly identified using these spectroscopic methods. Investigations using frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) to identify and differentiate plastics from environmental materials have yielded promising results for directly identifying microplastics in an environmental matrix. Herein, two artificially prepared environmental matrices that included natural soil, grass, wood, and high-density polyethylene were investigated using FD-FLIM. Our first results showed that we successfully identified one plastic type in the two artificially prepared matrices using FD-FLIM. However, further research must be conducted to improve the FD-FLIM method and explore its limitations for directly identifying microplastics in environmental samples. KW - FD-FLIM KW - Fluorescence lifetime KW - Environmental science KW - Fluorescence microscopy KW - Material identification KW - Microplastics Y1 - 2024 U6 - https://doi.org/10.1016/j.heliyon.2024.e25133 VL - 10 IS - 3 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Langhals, H. T1 - A method for sorting of plastics with an apparatus specific quantum efficiency approach T2 - 2019 IEEE Sensors Applications Symposium (SAS) N2 - Today, the automatic separation of polymers from each other in an industrial scale is an unsolved problem. In laboratory environments, two methods are known whereby plastic is sorted either by color or by fluorescence decay time measurements that require fast synchronization and thus expensive equipment. A simple and pragmatic process is proposed to separate plastics from each other: all fluorescent photons are counted in relation to the absorbed photons. A theoretical model and an experimental setup are built in order to determine an apparatus specific quantum efficiency. KW - polymer KW - plastic sorting KW - fluorescence KW - quantum efficiency Y1 - 2019 UR - https://ieeexplore.ieee.org/document/8706034 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Investigation of the Impact of CaCO3 Concentrations on the Fluorescence Lifetime of Polypropylene T2 - 2022 Conference on Lasers and Electro-Optics (CLEO) N2 - The impact of fillers on the fluorescence lifetime of polymers is still unknown. Investigating polypropylene containing different CaCO 3 concentrations using FD-FLIM show an exponential increase in fluorescence lifetime proportional to the CaCO 3 density in polypropylene. KW - Fluorescence KW - Lasers and electrooptics KW - Plastics KW - Electrooptical waveguides Y1 - 2022 SP - 1 EP - 2 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Non-destructive evaluation of treated polyethylene terephthalate films by fluorescence lifetime imaging T2 - 2021 IEEE Sensors Applications Symposium (SAS) N2 - The fluorescence decay time allows to identify and distinguish polymers from each other. Three differently treated biaxially-oriented polyethylene terephthalate films are examined with two excitation wavelengths of 445 and 488nm. The fluorescence decay time is dependent of the treatment method of the films and is a means for identification. KW - polymer KW - polymer identification KW - fluorescence lifetime imaging KW - fluorescence KW - FD-FLIM Y1 - 2021 U6 - https://doi.org/10.1109/SAS51076.2021.9530008 SP - 1 EP - 5 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Optical identification of car tire particles on soil using fluorescence lifetime imaging microscopy T2 - Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES), Technical Digest Series (Optica Publishing Group, 2022) N2 - Tire wear is one of the major contributors of environmental pollution by microplastic. FD-FLIM in combination with an image processing algorithm are successfully applied to detect tyre wear on soil. KW - Diode lasers KW - Fluorescence lifetime imaging KW - Image processing KW - Image processing algorithms KW - Phase modulation KW - Phase shift Y1 - 2022 U6 - https://doi.org/10.1364/ES.2022.ETu3H.3 SP - ETu3H.3 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - Investigation of the Impact of CaCO3 Concentrations on the Fluorescence Lifetime of Polypropylene T2 - Conference on Lasers and Electro-Optics N2 - The impact of fillers on the fluorescence lifetime of polymers is still unknown. Investigating polypropylene containing different CaCO3 concentrations using FD-FLIM show an exponential increase in fluorescence lifetime proportional to the CaCO3 density in polypropylene. KW - Diode lasers KW - Fluorescence KW - Fluorescence lifetime imaging KW - Fourier transforms KW - Phase shift KW - Stray light Y1 - 2022 U6 - https://doi.org/10.1364/CLEO_AT.2022.AM2M.2 SP - AM2M.2 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin A1 - Holst, Gerhard A1 - Franke, Robert T1 - An Approach of Identifying Polymers With Fluorescence Lifetime Imaging T2 - 2019 IEEE International Conference on Electrical Engineering and Photonics (EExPolytech) N2 - Nowadays, fluorescence lifetime measurements and the method of fluorescence lifetime imaging are already state of the art in biomedical research. Also first investigations show that polymers could be identified due to their endogenous fluorescent lifetime. Thus an approach of identifying polymers with fluorescence lifetime imaging is done in this contribution. Therefore, four different polymers are examined and evaluated with statistical methods in order to determine their specific fluorescence lifetimes. KW - polymer KW - fluorescence Y1 - 2019 SP - 186 EP - 189 ER - TY - JOUR A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Detection of plastics in water based on their fluorescence behavior JF - Journal of Sensors and Sensor Systems N2 - Plastic waste is one of the biggest growing factors contributing to environmental pollution. So far there has been no established method to detect and identify plastics in environmental matrices. Thus, a method based on their characteristic fluorescence behavior is used to investigate whether plastics can be detected and identified in tap water under laboratory conditions. The experiments show that the identification of plastics as a function of water depth is possible. As the identification becomes more difficult with higher water depths, investigations with a highly sensitive imaging method were carried out to obtain an areal integration of the fluorescent light and thus better results. KW - identification of plastics Y1 - 2020 UR - https://doi.org/10.5194/jsss-9-337-2020 VL - 9 IS - 2 SP - 337 EP - 343 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin T1 - Detektion von Kunststoffen in Wasser mithilfe von Fluoreszenz T2 - 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 N2 - Die wohl größte aktuelle Umweltverschmutzung mit Kunststoffen findet in Ozeanen, Seen und Flüssen statt. Bis jetzt gibt es kein etabliertes Verfahren, mit dem Kunststoffe in Umwelt- bzw. Wassermatrizen detektiert werden können. Deshalb wird mit einem Verfahren, welches auf dem Prinzip der Fluoreszenz basiert, untersucht, ob unter Laborbedingungen Kunststoffe in Wasser detektiert und identifiziert werden können. Anhand eines mathematischen Modells, einer Simulation und mit Hilfe von optischen Experimenten wird gezeigt, dass der Nachweis und auch eine Identifikation von Kunststoffen in Abhängigkeit der Wassertiefe, mit diesem Verfahren möglich ist. KW - Kunststoffe KW - Umwelt KW - Fluoreszenzmesstechnik KW - Fluoreszenz Y1 - 2019 SN - 978-3-9819376-0-2 SP - 687 EP - 694 PB - AMA Service GmbH CY - Wunstorf ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Versen, Martin ED - Bauer, Benedict ED - Wittenberg, Carsten T1 - Bestimmung einer Quanteneffizienz für das automatisierte Sortieren von Kunststoffen durch Fluoreszenz T2 - AALE 2019 - Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz KW - Quanteneffizienz KW - Fluoreszenz Y1 - 2019 SN - 978-3-8007-4860-0 SP - 179 EP - 187 PB - VDE Verlag CY - Berlin ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Leiter, Nina A1 - Dietlmeier, Maximilian A1 - Löder, Martin G.J. A1 - Versen, Martin A1 - Laforsch, Christian T1 - Comparison of Two Classification Methods Trained with FD-FLIM Data to Identify and Distinguish Plastics from Environmental Materials T2 - 2023 International Joint Conference on Neural Networks (IJCNN) N2 - Previous research on identifying plastic types and differentiating plastics from environmental material is promising by utilizing the specific fluorescence lifetime, but the evaluation still has to be automated. Therefore, an automated Gaussian analysis is developed for evaluating frequency-domain fluorescence lifetime images of plastics and environmental materials. Furthermore, we applied a “Multilayer Perceptron” and “Random Forest Classifier” to the data resulting from the Gaussian analysis of the frequency domain fluorescence lifetime imaging microscopy data. The classification results show high F1-scores, whereby the best “Multilayer Perceptron” and “Random Forest Classifier” achieved an F1-score of 90%. Thus, identifying and differentiating plastics and environmental materials is possible by applying a “Multilayer Perceptron” or “Random Forest Classifier” to the Gaussian-analyzed imaged fluorescence lifetime data. KW - Fluorescence KW - Microscopy KW - Plastics KW - FD-FLIM KW - Neural networks KW - Environment KW - Frequency-domain analysis KW - Gaussian analysis KW - MLP KW - Multilayer perceptrons KW - Random forests KW - RFC Y1 - 2023 U6 - https://doi.org/10.1109/IJCNN54540.2023.10191054 SP - 1 EP - 9 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Khan, Yamna A1 - Leiter, Nina A1 - Versen, Martin A1 - Löder, Martin A1 - Laforsch, Christian T1 - Combining BLOB-Detection and MLP to Detect and Identify Plastics in an Environmental Matrix T2 - 2023 IEEE Sensors Applications Symposium (SAS) N2 - Environmental pollution by plastics is an increasing problem. However, state-of-the-art methods have significant disadvantages in detecting and identifying plastics directly in an environmental matrix. In this study, we propose a blob detection algorithm in combination with a neural network for fast and automated identification of plastics and non-plastics in a single fluorescence lifetime image. Therefore an artificial environmental matrix is prepared that contains soil, grass, spruce and HDPE (high density polyethylene) particles. Several FD-FLIM (frequency domain fluorescence lifetime imaging microscopy) images are taken, and the detection algorithm and the neural network are applied. We successfully demonstrated the suitability of the thresholding algorithm and the binary classification of the HDPE particles directly in the environmental matrix. KW - Fluorescence KW - Plastics KW - FD-FLIM KW - Neural networks KW - MLP KW - blob detection KW - Classification algorithms KW - Dogs KW - fluorescence lifetime KW - plastics identification KW - Soil KW - Thresholding (Imaging) Y1 - 2023 U6 - https://doi.org/10.1109/SAS58821.2023.10254171 SP - 1 EP - 5 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Khan, Yamna A1 - Leiter, Nina A1 - Versen, Martin A1 - Löder, Martin A1 - Laforsch, Christian T1 - Development of a BLOB-detection algorithm based on DoG to detect Plastic in an environmental matrix using FD-FLIM T2 - Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES) N2 - The direct identification of plastics in an environmental matrix is heavily researched. We successfully developed a BLOB-detection algorithm based on differences of Gaussians to identify HDPE particles in an artificial environmental matrix using FD-FLIM. KW - Diode lasers KW - Fluorescence lifetime imaging KW - Phase shift KW - Neural networks KW - Optical filters KW - Spatial resolution Y1 - 2023 U6 - https://doi.org/10.1364/ES.2023.EW4E.4 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin A1 - Laforsch, Christian T1 - An optical method to differentiate wood from polymers using fluorescence lifetime imaging microscopy T2 - OSA Optical Sensors and Sensing Congress 2021 (AIS, FTS, HISE, SENSORS, ES) (2021), paper EW4G.6 N2 - In this contribution investigations with fluorescence lifetime imaging microscopy (FLIM) are made to optically distinguish polymers and wood. The results show that the distinction and identification is possible in a graphical and calculative way. Y1 - 2021 U6 - https://doi.org/10.1364/ES.2021.EW4G.6 SP - EW4G.6 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin A1 - Laforsch, Christian T1 - An optical method to differentiate wood from polymers using fluorescence lifetime imaging microscopy T2 - OSA Optical Sensors and Sensing Congress 2021 (AIS, FTS, HISE, SENSORS, ES) N2 - In this contribution investigations with fluorescence lifetime imaging microscopy (FLIM) are made to optically distinguish polymers and wood. The results show that the distinction and identification is possible in a graphical and calculative way. KW - Diode lasers KW - Fluorescence lifetime imaging KW - Image processing algorithms KW - Phase shift KW - Raman spectroscopy KW - Stray light Y1 - 2021 U6 - https://doi.org/10.1364/ES.2021.EW4G.6 SP - EW4G.6 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin T1 - Automatische Erkennung von Kunststoffen durch bildgebende Fluoreszenzabklingzeitmessung T2 - Tagungsband: AALE 2020 - Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz KW - Erkennung von Kunststoffen KW - Fluoreszenzabklingzeitmessung Y1 - 2020 SN - 978-3-8007-5180-8 SP - 223 EP - 231 PB - VDE Verlag Berlin ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, Gerhard A1 - Versen, Martin T1 - A novel approach to optically distinguish plastics based on fluorescence lifetime measurements T2 - 2020 IEEE Sensors Applications Symposium (SAS) N2 - In medical and biological research, fluorescence lifetime measurements and fluorescence lifetime imaging is already a part of the standardized analysis procedures. As first investigations have shown, polymers can be identified using fluorescence lifetime imaging and an evaluation algorithm. Thus, this contribution pursues a novel approach for the direct differentiation of four polymers with fluorescence lifetime imaging. Therefore, the evaluation algorithm is extended to compare several fluorescence lifetime images to prove that a distinction is possible. Y1 - 2020 U6 - https://doi.org/10.1109/SAS48726.2020.9220084 SP - 1 EP - 6 ER - TY - CHAP A1 - Wohlschläger, Maximilian A1 - Holst, G. A1 - Versen, Martin T1 - A novel approach to optically distinguish plastics based on fluorescence lifetime measurements T2 - 2020 IEEE Sensors Applications Symposium (SAS), Kuala Lumpur, Malaysia KW - fluorescence Y1 - 2020 SP - 1 EP - 6 ER - TY - CHAP A1 - Wohlschlaeger, Maximilian A1 - Versen, Martin A1 - Laforsch, Christian T1 - A novel approach to optically detect microplastic in an environmental matrix with Rapid-FLIM T2 - Sensors and Measuring Systems; 21th ITG/GMA-Symposium Y1 - 2022 SP - 1 EP - 6 ER - TY - JOUR A1 - Woerthmann, B.M. A1 - Lindner, Johannes A. A1 - Kovacevic, T. A1 - Pergam, P. A1 - Schmid, F. A1 - Briesen, H. T1 - A novel method for assessing the coating uniformity of hot-melt coated particles using micro-computed tomography JF - Powder Technology N2 - The effectiveness of hot-melt coating depends on its uniformity and the extent to which the surface is completely covered. Compared with solvent-based coating, spreading is more limited in hot-melt coating; thus, the coating uniformity is more affected by the process parameters. This study presents a new method for identifying and quantifying factors influencing coating uniformity. The proposed method facilitates the determination of coating-thickness distribution and non-covered surface proportion based on micro-computed tomography measurements. The proposed method is based on particles that have undergone hot-melt coating in a fluidized bed, and it is compared to common methods for layer-thickness determination. The influencing factors are quantified in terms of the dependency of coating uniformity on the coating amount and material. Material properties have a significant impact because stearin and palm fat create different coating layers. The proposed method is confirmed to be well suited for analyzing coating qualities. KW - Wurster fluidized bed KW - Hot-melt coating KW - Micro-computed tomography KW - Layer-thickness distribution KW - Coating uniformity Y1 - 2021 UR - https://doi.org/10.1016/j.powtec.2020.09.065 VL - 378 IS - Part A SP - 51 EP - 59 ER - TY - CHAP A1 - Wittmann, Josef A1 - Hagl, Rainer A1 - Kennel, Ralph T1 - Influence of Position Measuring Errors on Speed Ripple in Servo Drives T2 - 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM, Capri, Italy N2 - Position measuring devices with sinusoidal measuring signals are widely used in position-controlled servo drives in industrial automation, e.g., for machine tools or semiconductor production machines. Usually, the feedback signal for the speed or velocity controller is calculated from the measured position. Therefore, position measuring errors affect these control loops. This study presents an analytic error model that considers non-ideal sinusoidal measuring signals with basic deviations (amplitude differences, offset errors, and phase shift) as well as signal harmonics. The model was used to systematically investigate the influence of signal quality and the number of signal periods from position measuring devices on speed ripple, across a wide range of speeds. A test stand with a high-resolution reference angle measuring device was used to confirm the results. KW - Elektrische Antriebssysteme KW - Leistungselektronik  KW - Automatisierungstechnik KW - Power Electronics KW - Electrical Drives KW - Automation and Motion Y1 - 2016 UR - https://doi.org/10.1109/SPEEDAM.2016.7525816 ER - TY - CHAP A1 - Wittmann, Josef A1 - Hagl, Rainer A1 - Kennel, Ralph T1 - Hybrid Current and Acceleration Control of Servo Drives T2 - PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nürnberg N2 - A hybrid current and acceleration control is presented and shown to improve the load disturbance behavior of servo drives significantly without additional sensor effort. The feedback signal of the acceleration control loop is calculated from the position data of the motor encoder. Hence, position measuring errors influence this control loop and lead to speed ripple. Therefore, the presented design of the acceleration control loop considers both load sensitivity and position measuring errors. KW - Elektrische Antriebssysteme KW - Leistungselektronik  KW - Servo drives KW - Electrical drives Y1 - 2017 ER - TY - CHAP A1 - Wittmann, Josef A1 - Hagl, Rainer T1 - Gleichlaufschwankungen in Servoantrieben T2 - Fortschritte in der Antriebs- und Automatisierungstechnik (FAA), Stuttgart KW - Elektrische Antriebssysteme KW - Leistungselektronik  KW - Automatisierungstechnik Y1 - 2016 ER - TY - JOUR A1 - Wittmann, Josef A1 - Hagl, Rainer T1 - Positionsmessfehler in Servoantrieben JF - Antriebstechnik KW - Elektrische Antriebssysteme KW - Leistungselektronik  KW - Servoantrieb KW - Positionsmessung Y1 - 2016 VL - 2016 IS - 1-2 ER - TY - THES A1 - Wittmann, Josef T1 - Beschleunigungsregelung von Servoantrieben basierend auf Positionsmesswerten N2 - In der vorliegenden Arbeit wird der Einfluss einer Beschleunigungsregelung auf das Regelverhalten von Servoantrieben untersucht. Auf einen Beschleunigungssensor wird verzichtet. Die Istbeschleunigung wird aus dem Positionsmesswert berechnet. Anhand eines verifizierten Modells für Positionsmessfehler wird der Einfluss der Positionsauflösung und der Messsignalqualität auf die berechnete Beschleunigung dargestellt. Basierend auf diesen Ergebnissen wird das Konzept einer kombinierten Strom- und Beschleunigungsregelung entwickelt und dessen Funktionalität nachgewiesen. KW - Elektrotechnik Y1 - 2019 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:91-diss-20190107-1452670-1-0 ER - TY - CHAP A1 - Wissing, Christiane A1 - Lüftl, Katharina T1 - Den Entwicklungsprozess von der Pflegeperson zur praxisbegleitenden Lehrperson fördern T2 - Praxisbegleitung. Perspektiven für die berufliche und akademische Pflegebildung KW - Praxisbegleitung Y1 - 2019 SP - 32 EP - 46 PB - Springer Verlag CY - Heidelberg ER - TY - CHAP A1 - Wissing, Christiane A1 - Kerres, Andrea A1 - Dorothea, Thurner A1 - Lüftl, Katharina ED - Brühe, Roland ED - von Gahlen-Hoops, Wolfgang T1 - Pflegedidaktische Überlegungen zur Implementierung von Fallbesprechungen im Rahmen der Lernortkooperation im Pflegebildungssystem T2 - Handbuch Pflegedidaktik II N2 - Eine Lernortkooperation (LOK) kann die Lehr-Lern-Prozesse in der Pflegebildung verbessern (vgl. Briese 2018: 7). Allerdings besteht eine LOK nicht nur aus dem theoretischen und den praktischen Lernorten, sondern auch aus übergreifenden Lernorten, wie beispielsweise der sogenannte dritte Lernort. Um die LOK zu stärken und ein gemeinsames Bildungsver-ständnis zu erlangen, möchten wir die Methode der Fallbesprechung nutzen. Anhand dieser Methode stellen wir pflegedidaktische Überlegungen an, wie eine zielgruppengerechte Umsetzung auf allen Ebenen der LOK - Information, Abstimmung und Kooperation (vgl. Dehnbostel 2022: 97) - gelingen könnte. KW - Pflegedidaktik KW - Lernortkooperation Y1 - 2024 SP - 93 EP - 117 PB - UTB CY - Stuttgart ER - TY - JOUR A1 - Wissing, C. A1 - Lüftl, Katharina A1 - Kerres, A. T1 - Das Prüfungsformat OSCE (Teil 7). Evaluationsergebnisse aus dem Projekt der KSH München in Kooperation mit der HS Rosenheim und vier Berufsfachschulen für Gesundheits- und Krankenpflege oder Altenpflege in München JF - Pflegezeitschrift KW - Gesundheits-und Krankenpflege Y1 - 2017 IS - 70(11) ER - TY - JOUR A1 - Wissing, C. A1 - Kerres, A. A1 - Lüftl, Katharina T1 - Das Prüfungsformat OSCE (Teil 6). Infusionen mit Zusatz, subkutane und intramuskuläre Injektion, Legen eines Blasenkatheters JF - Pflegezeitschrift KW - Gesundheits-und Krankenpflege Y1 - 2017 IS - 70(10) ER - TY - JOUR A1 - Wissing, C. A1 - Kerres, A. A1 - Lüftl, Katharina T1 - Das Prüfungsformat OSCE (Teil 5). Alte Menschen personen- und situationsbezogen pflegen JF - Pflegezeitschrift KW - Gesundheits-und Krankenpflege Y1 - 2017 IS - 70(9) ER - TY - JOUR A1 - Wissing, C. A1 - Kerres, A. A1 - Lüftl, Katharina T1 - Das Prüfungsformat OSCE (Teil 3). Injektionen, Verbandswechsel, Thromboseprophylaxe und Soor- und Parotitisprophylaxe JF - Pflegezeitschrift N2 - Studierende des Bachelorstudiengangs Pflegepädagogik an der KSH München haben im Rahmen eines Studienprojektes für echte Prüfungssituationen in der Gesundheits- und Krankenpflegeausbildung, der Altenpflegeausbildung oder des dualen Pflegestudiums OSCE-Prüfungen entwickelt und durchgeführt. In dieser Ausgabe gibt es ein Prüfungsbeispiel, das die Studierenden für die Berufsfachschule für Krankenpflege Maria Regina entwickelt haben KW - Gesundheits-und Krankenpflege Y1 - 2017 IS - 70(7) ER - TY - JOUR A1 - Wissing, C. A1 - Kerres, A. A1 - Lüftl, Katharina T1 - Das Prüfungsformat OSCE im Pflegepädagogikstudium erlernen (Teil 1) JF - Pflegezeitschrift N2 - Der vorliegende Beitrag ist Auftakt einer Serie von OSCE-Prüfungen, die Studierende des Bachelorstudiengangs Pflegepädagogik an der KSH München im Rahmen eines Studienprojektes für echte Prüfungssituationen in der Gesundheits- und Krankenpflegeausbildung, der Altenpflegeausbildung oder des dualen Pflegestudiums entwickelt und durchgeführt haben. Zunächst wird das Konzept der OSCE-Prüfung und der Aufbau des Studienprojektes vorgestellt. In den nächsten Ausgaben folgen Auszüge aus den Prüfungen und kurze Erfahrungsberichte. Abgeschlossen wird mit einer Evaluation durch alle beteiligten Lernenden und Lehrenden. KW - Gesundheits-und Krankenpflege Y1 - 2017 IS - 70(5) ER - TY - JOUR A1 - Wirth, Heike A1 - Schutter, Sabina T1 - Versorger und Verlierer JF - DJI Impuls N2 - Das traditionelle Ernährermodell wird seltener. Vor allem junge Frauen arbeiten genausoviel wie ihre Partner. Doch sind Kinder da, steigen die Mütter ganz oder teilweise aus dem Erwerbsleben aus – mit erheblichen Risiken für ihre Alterssicherung. KW - Familie KW - Arbeit Y1 - 2011 VL - 2011 IS - 01 SP - 28 EP - 30 ER - TY - CHAP A1 - Wirnsberger, Markus A1 - Küfner, Marcel A1 - Krause, Harald T1 - Ventilation Efficiency Of Push-Pull Ventilation Systems In Residential Buildings – CFD Simulation And Validation Of The Model With Measurements In A Research Apartment T2 - Proceedings of the 16th IBPSA Conference Rome, Italy, Sept. 2-4, 2019 N2 - In the project, domestic ventilation concepts with PushPull-Fans were investigated. These ventilation units are characterized by a periodically changing supply and exhaust air operation. To ensure balanced operation, these ventilation units are always used in pairs, with one unit being in the exhaust air mode and the other in supply air mode. Measurements were made in a research apartment. The results were used to validate a CFD simulation model for transient studies. A room-by-room layout with two units in one room and a cross-room ventilation layout with two connected units in two rooms were analysed. The age of air was used as the evaluation parameter. With the room-by-room ventilation layout a lower age of air in the bedroom compared to the cross-room layout was obtained. However, in the room-by-room layout, the air flow through the larger living room with connected corridor was poorer in the rear area. With the cross-room layout, the flow through the rooms was more uniform. With the cross-room layout, the average age of air in the apartment could be slightly reduced compared to the room-by-room layout. KW - domestic ventilation concepts Y1 - 2019 UR - https://doi.org/10.26868/25222708.2019.211281 SP - 785 EP - 790 ER - TY - CHAP A1 - Winter, C. A1 - Buchschmid, M. A1 - Weineisen, C. A1 - Müller, G. A1 - Schanda, Ulrich T1 - Modelling the Sound Transmission across Junctions of Building Components by Energy Influence Coefficients T2 - European Association for Structural Dynamics (ed.), EURODYN N2 - A trend towards lightweight structures, e.g. timber structures, is noticeable in civil engineering, which implies the necessity to predict vibroacoustic characteristics like the transmission of structure-borne sound in order to fulfil requirements regarding serviceability. This contribution focuses on the investigation of junctions of building components e.g. between wall and ceiling. It is part of a joint research project with the aim to catalogue the coupling for a variety of junctions. The resulting database may serve to predict the transmission of structure-borne sound which is typically carried out either using a Finite Element (FEM) approach, suitable for the low frequency range, or by means of energy methods like the Statistical Energy Analysis (SEA) for the high frequency range. Therefore the so-called mid frequency gap emerges, which is examined and attempted to be closed. In this context SEA-averaging techniques are applied in the postprocessing of FEM calculations to obtain an adapted “SEAlike” approach. By varying the subsystems to be excited it is possible to determine Energy Influence Coefficients (EIC), which describe the specific energy content of the different subsystems with respect to the input power. Using this hybrid approach vibroacoustic predictions can be performed also in the mid frequency range. Inverting the EIC-matrix Coupling Loss Factors as well as Damping Loss Factors of the different subsystems can be calculated if the subsystem definition fulfils the SEA-requirements. The application of the method in combination to a classical SEA calculation and to laboratory measurements is presented. KW - Schallmesstechnik KW - Holzbau Y1 - 2014 ER - TY - CHAP A1 - Winter, C. A1 - Buchschmid, M. A1 - Mecking, S. A1 - Müller, G. A1 - Schanda, Ulrich T1 - Ein hybrider FEM/SEA Ansatz zur Prognose der Schallübertragung an Bauteilstößen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - Es wurden Stoßstellendämm-Maße Kij für verschiedene Bauteilverbindungen von BSPH-Elementen gemessen. Diese zeigen eine gute Übereinstimmung zu anderen Werten aus der Literatur. Bei den Stoßstellen wurde der Einfluss von Elastomerlagern untersucht. Die Ergebnisse zeigen einen deutlichen Einfluss auf die Kij. Eine Berechnung der Kij mithilfe von Kopplungsverlustfaktoren ηij, welche aus einem SEAModell resultieren, zeigen eine ausreichende Übereinstimmung. Weitere Schritte der Modellierung zur Überprüfung dieser Erkenntnisse und zur Abbildung von Elastomeren sind notwendig. Der Beitrag ist Teil des gemeinsam von der TU München, der HS Rosenheim und dem ift Rosenheim durchgeführten DFG-AiF Forschungsvorhabens Vibroakustik im Planungsprozess für Holzbauten. Das IGF-Vorhaben 17328 N/1 der Forschungsvereinigung HS Rosenheim wurde über die AiF im Rahmen des Programms zur Förderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert. KW - Holzbau KW - Schallmesstechnik Y1 - 2014 ER - TY - CHAP A1 - Windl, Maximiliane A1 - Feger, Sebastian S. T1 - Designing Interactive Privacy Labels for Advanced Smart Home Device Configuration Options T2 - In Designing Interactive Systems Conference (DIS ’24), July 01–05, 2024, IT University of Copenhagen, Denmark. ACM, New York, NY, USA N2 - Labels inform smart home users about the privacy of devices before purchase and during use. Yet, current privacy labels fail to fully reflect the impact of advanced device configuration options like sensor state control. Based on the successful implementation of related privacy and security labels, we designed extended static and interactive labels that reflect sensor states and device connectivity. We first did expert interviews (N = 10) that informed the final label design. Second, we ran an online survey (N = 160) to assess the interpretation and usability of the novel interactive privacy label. Lastly, we conducted a second survey (N = 120) to investigate how well our interactive labels educate users about sensor configuration. We found that most participants successfully used the interactive label and retrieved sensor information more efficiently and correctly. We discuss our findings in the context of a potential shift in label use toward control and use-case-based interaction. KW - Privacy Labels KW - Smart Home KW - Interactive Labels Y1 - 2024 U6 - https://doi.org/10.1145/3643834.3661527 ER - TY - CHAP A1 - Wilhelm, Patrick A1 - Gretz, Markus A1 - Stephan, Dietmar A1 - Plank, Johann ED - Partec 2007, T1 - Synthesis and photocatalytic activity of magnetic core-shell nanoparticles T2 - International Congress of Particle Technology, Partec KW - Bauchemie Y1 - 2021 ER - TY - JOUR A1 - Wildgans, H. A1 - Benstetter, Franz A1 - Mohnke, M. A1 - Teglas, M. T1 - Telematik in der Arbeitsmedizin: Praktische Erfahrungen aus einer Machbarkeitsstudie der BGHM JF - ASU Zeitschrift für medizinische Prävention KW - Arbeitsmedizin KW - Praxis KW - Telematik Y1 - 2020 VL - 2019 IS - 6 ER - TY - JOUR A1 - Wieser, Christine A1 - Hacker, Bernd T1 - Praktische Auswirkungen von IFRS 9 auf die Forderungsbewertung - Fallstudie zur Umsetzung der neuen Abschreibungsregeln nach dem expected loss model. JF - PiR - Internationale Rechnungslegung N2 - Die Bemessung des Kreditrisikos für Kreditforderungen erfolgte nach IAS 39 bisher nach dem Konzept der eingetretenen Verluste (dem sog. incurred loss model). Danach wurden Kreditausfälle erst dann bilanziell erfasst, wenn das Ausfallereignis bereits eingetreten war. IFRS 9 hat nun einen Pradigmenwechsel hin zur Bewertung nach den erwarteten Verlusten (expected loss model) anstelle der eingetreten Verluste vollzogen. Im vorliegenden Beitrag wird die praxisnahe Anwendung des expected loss model anhand verschiedener Rating-Szenarien dargestellt und mit einer rechnerischen Fallstudie veranschaulicht. KW - IFRS 9 KW - Forderungsbewertung Y1 - 2018 VL - 2018 IS - 3/2018 SP - 69 PB - NWB Verlag GmbH & Co. KG CY - Herne, Deutschland ER - TY - CHAP A1 - Wiedl, Sebastian A1 - Obermeier, Frederik A1 - Karlinger, Peter A1 - Müller, Norbert T1 - Holzbasierte Bioökonomie und Kunststofftechnik: Nachwachsende Rohstoffe für technische Bauteile BT - VDI-Berichte T2 - PIAE Europe 2024 KW - Leichtbau KW - Faserverbund KW - Naturfasern Y1 - 2024 SN - 978-3-18-092435-9 IS - 2435 SP - 413 EP - 427 PB - VDI Verlag GmbH CY - Düsseldorf ER - TY - JOUR A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Würtele, Martin A1 - Gleixner, Josef T1 - Natürliche Fasern für biologisch abbaubare Verpackungen JF - Plastverarbeiter N2 - Ziel des vorgestellten Projektes war die Entwicklung einer Verpackung aus einer biobasierten und biologisch abbaubaren Materialkombination mit 30 Gew.-% Naturfaseranteil. Als Füllstoff kamen regionale Naturprodukte wie Holz und Stroh zum Einsatz. KW - Biopolymere KW - Nachhaltig KW - Verpackungen KW - Naturfasern Y1 - 2023 VL - 2023 IS - 09 SP - 1 EP - 3 PB - Hüthig Medien GmbH CY - Heidelberg ER - TY - JOUR A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Schemme, Michael A1 - List, Manuela A1 - Ruckdäschel, Holger T1 - Comparison of Melting Processes for WPC and the Resulting Differences in Thermal Damage, Emissions and Mechanics JF - Materials N2 - The necessity for resource-efficient manufacturing technologies requires new developments within the field of plastic processing. Lightweight design using wood fibers as sustainable reinforcement for thermoplastics might be one solution. The processing of wood fibers requires special attention to the applied thermal load. Even at low processing temperatures, the influence of the dwell time, temperature and shear force is critical to ensure the structural integrity of fibers. Therefore, this article compares different compounding rates for polypropylene with wood fibers and highlights their effects on the olfactory, visual and mechanical properties of the injection-molded part. The study compares one-step processing, using an injection-molding compounder (IMC), with two-step processing, using a twin-scew-extruder (TSE), a heating/cooling mixer (HCM) and an internal mixer (IM) with subsequent injection molding. Although the highest fiber length was achieved by using the IMC, the best mechanical properties were achieved by the HCM and IM. The measured oxidation induction time and volatile organic compound content indicate that the lowest amount of thermal damage occurred when using the HCM and IM. The advantage of one-time melting was evened out by the dwell time. The reinforcement of thermoplastics by wood fibers depends more strongly on the structural integrity of the fibers compared to their length and homogeneity KW - Wood fibers KW - compounding methods KW - volatile organic compounds KW - fiber length KW - mechanics; Y1 - 2022 U6 - https://doi.org/10.3390/ma15093393 VL - 15 IS - 9 PB - MDPI CY - Basel ER - TY - CHAP A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Schemme, Michael A1 - List, Manuela T1 - Vergleich von unterschiedlichen Aufschmelzverfahren und die daraus resultierenden Eigenschaften für WPC-Spritzgussteile T2 - Technomer 2021 N2 - Leichtbau und ressourcenschonende Herstellungstechnologien sind zentrale Themen des 21. Jahrhunderts. Im Zuge dessen werden vermehrt Naturprodukte in der Kunststoffverarbeitung eingesetzt. Eine Sparte dabei bilden Holz-Polymer Werkstoffe (WPC), welche seit 2014 eine Verdoppelung in der Produktionsmenge erfahren haben. Dabei werden meist Holzpartikel statt Fasern als Füll- und Verstärkungsstoff eingesetzt. Der Vortrag befasst sich mit dem Vergleich von verschiedenen Aufbereitungsmöglichkeiten von WPCs mit Holzfaserverstärkung hinsichtlich Mechanik und thermischer Schädigung des temperaturempfindlichen Holzes. Teil der Untersuchung ist die einstufige Verarbeitung mittels eines Injection-Moulding-Compounders sowie die zweistufige Verarbeitung mittels Compounder und Heiz-Kühl-Mischer mit anschließendem Urformen an der Spritzgussmaschine. KW - Holzfasern KW - Compoundierverfahren KW - Spritzguss KW - Thermische Beanspruchung KW - Mechanik Y1 - 2021 SN - 978-3-939382-15-7 SP - 1 EP - 13 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - CHAP A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Müller, Norbert A1 - Ruckdäschel, Holger T1 - Cellulosefaserverstärktes Polypropylen – Eigenschaftsbeeinflussung durch die Schmelzeaufbereitung T2 - Technomer 2023 N2 - Verarbeitungstemperaturen, Verweilzeit und Scherkräfte sind entscheidend, um die strukturelle Integrität von cellulosebasierten Fasern zu gewährleisten. In dieser Studie wurden die Einflüsse durch die Schmelzeaufbereitung eines cellulosefaserverstärkten Polypropylens auf die Faser und den Faserverbund untersucht. Die Schmelze wurde in einem Plastographen mit verschiedenen Rotordrehzahlen, Schmelzetemperaturen und Verweilzeiten aufbereitet. Um die Auswirkung der Einspeisungsmethode auf den Faserabbau zu analysieren, wurden die Fasern entweder direkt der thermoplastischen Schmelze oder zusammen mit dem Kunststoffgranulat dem Plastographen zugeführt. Die Zugabe der Fasern in die Schmelze geht mit einer erhöhten thermischen und verminderten mechanischen Belastung der Fasern einher. Bei der Prüfung der mechanischen Eigenschaften der verschieden aufbereiteten Compounds zeigten sich signifikante Unterschiede. Wurden die Fasern direkt der Schmelze hinzugefügt, so führte dies zu einer deutlich reduzierten Zugfestigkeit. Optische Unterschiede in den Schliffbildern der spritzgegossenen Prüfstäbe sowie in den Faserlängen nach Compoundierung konnten nicht festgestellt werden. Die verminderte Festigkeit wird folglich auf die unterschiedliche thermische Belastung der Faser während der Verarbeitung zurückgeführt. KW - Cellulosefaser KW - Faserververstärkung KW - Polypropylen KW - Schmelzeaufbereitung KW - Faserbeschickung Y1 - 2023 SN - 978-3-939382-16-4 SP - 1 EP - 14 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - JOUR A1 - Werning, Hanno A1 - Udo-Joachim, Meyer T1 - Brandschutztechnische Einstufung von Mauerwerk JF - Bauprodukte Aktuell N2 - Der Artikel behandelt die Nachweisführung zum Feuerwiderstand von Mauerwerks-Bauteilen. Es werden die möglichen bauaufsichtlichen Anforderungen an Standsicherheit und/oder Raumabschluss im Brandfall, die mögliche Nachweisführung über Bauarten als technische Baubestimmungen oder Bauarten mit Anwendbarkeitsnachweis, die Zuordnung der bauaufsichtlichen Anforderungen zu den Leistungsangaben in den Nachweisen und die Grundlagen der brandschutztechnischen Bemessung von Mauerwerksbauteilen diskutiert. KW - Mauerwerk KW - Bauordnungsrefcht KW - Brandschutz Y1 - 2024 VL - 8 IS - 1 SP - 1 EP - 12 PB - RM Rudolf Müller Medien GmbH & Co.KG CY - Köln ER - TY - BOOK A1 - Werning, Hanno A1 - Teibinger, Martin ED - Holzforschung Austria, T1 - Dezentrale Lüftungsanlagen – Marktübersicht N2 - Das Buch enthält einen "State of the Art" (2004) über Dezentrale Lüftungsgeräte / Lüftungsanlagen. KW - Dezentrale Lüftung Y1 - 2005 SN - 3-9501977-0-2 PB - Holzforschung Austria HFA (Selbstverlag) CY - Wien ET - 1. Auflage ER - TY - JOUR A1 - Werning, Hanno A1 - Stich, Florian T1 - Nachhaltigkeitsbewertung von Bauprodukten und Bauwerken – „Zuwachs“ bei der CE-Kennzeichnung JF - Bauprodukte Aktuell N2 - Der Beitrag geht auf den Umgang mit der Grundanforderung (BWR) 7 "Nachhaltige Nutzung natürlicher Ressourcen" der BauPVO in der CE-Kennzeichnung von Bauprodukten ein und zeigt die Verbindung zwischen den Nachhaltigkeitskennwerten der Bauprodukte mit der Nachhaltigkeitsbewertung von Bauwerken auf. KW - Nachhaltigkeit KW - Bauprodukte KW - Bauordnungsrecht Y1 - 2023 VL - 7 IS - 5 SP - 1 EP - 10 PB - RM Rudolf Müller Medien GmbH & Co.KG CY - Köln ER - TY - BOOK A1 - Werning, Hanno A1 - Schober, Klaus Peter ED - Holzforschung Austria, T1 - Fenstersysteme – Marktübersicht, Konstruktion und Einbau in vorgefertigte Außenwände aus Holz N2 - Das Buch enthält einen Marktüberblick über verschiedene, teils innovative Fenstersysteme (Zeitpunkt 2003/2004) als "State of the Art". Es werden Möglichkeiten zum Einbau in vorgefertigte Holzbau-Außenwände aufgezeigt. KW - Fenster Y1 - 2004 SN - 978-3-9501664-6-0 PB - Holzforschung Austria HFA (Selbstverlag) CY - Wien ET - 1. Auflage ER - TY - JOUR A1 - Werning, Hanno A1 - Schaper, Jens T1 - "Nichttragende Brandwände" - Zuordnung und Nachweismöglichkeiten unter MVV TB JF - Bauprodukte Aktuell N2 - Der Beitrag behandelt den Umgang mit sogenannten "nichttragenden Brandwänden" im deutschen Bauordnungsrecht. Mit der Umstellung von der früheren Bauregelliste (BRL) auf die (Muster) Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) wurde diesen die Grundlage für die Erteilung allgemeiner bauaufsichtlicher Prüfzeugnisse und die erforderliche Zuordnung der bauaufsichtlichen Anforderungen zu Leistungsangaben in Anwendbarkeitsnachweisen entzogen. Es wird die Möglichkeit der "Verzichtserklärung" der obersten Bauaufsichtsbehörden vorgestellt. KW - Brandwand KW - MVV TB KW - Bauordnungsrecht Y1 - 2023 VL - 7 IS - 6 SP - 1 EP - 8 PB - RM Rudolf Müller Medien GmbH & Co.KG CY - Köln ER - TY - JOUR A1 - Werning, Hanno A1 - Krause-Czeranka, Thomas ED - Sundermeier, Matthias ED - Meinen, Heiko T1 - Klarstellungen zum Bauproduktenrecht vor dem Hintergrund der laufenden Bauordnungs-Reformen JF - Bauwirtschaft N2 - Der Beitrag stellt verschiedene Aussagen rund um die Reform des Bauproduktenrechtes in Deutschland seit MBO 2002, Ausgabe Mai 2016, ins richtige Licht. Es gibt in zahlreichen Beiträgen teilweise verwirrende oder sogar irrtümliche Aussagen zu den betreffenden Änderungen, diese werden hier jeweils mit Quellenbezug diskutiert. KW - Bauproduktenrecht Y1 - 2019 SN - 2509-8594 VL - 2019 IS - 3 SP - 165 EP - 174 PB - Werner Verlag CY - Köln ER - TY - JOUR A1 - Werning, Hanno A1 - Krause-Czeranka, Thomas T1 - Abweichungen im Bauordnungsrecht - Bauprodukte und Bauarten JF - Bauprodukte Aktuell N2 - Der Beitrag gibt einen Überblick über die verschiedenen Abweichungen, die im Bauordnungsrecht behandelt werden. Die Abweichungen von den materiellen Anforderungen des Bauordnungsrechtes werden nur kurz behandelt. Abweichungen bei den Nachweisen für Bauprodukte und Bauarten werden ausführlich diskutiert hinsichtlich möglicher Ursachen und den Auswirkungen für die Nachweisführung. Auch auf das Thema "Abweichungen" bei Bauprodukten mit CE-Kennzeichnung nach BauPVO wird eingegangen. Die Abweichungen bei Technischen Baubestimmungen für Planung, Bemessung und Ausführung werden mit Bezug auf die VV TB erläutert. KW - Bauproduktenrecht KW - Verwendbarkeitsnachweise KW - Anwendbarkeitsnachweise KW - Technische Baubestimmungen Y1 - 2021 VL - 2021 IS - 2 SP - 1 EP - 11 PB - FeuerTrutz Network GmbH CY - Köln ER - TY - JOUR A1 - Werning, Hanno A1 - Haut, Sandra T1 - Flashover für die Brancheninitiative "Normen im Trockenbau / Ausbau" JF - FeuerTrutz Magazin N2 - Der Beitrag berichtet über die Ergebnisse des Projektes "Normungsinitiative Trockenbau/Ausbau - Grundlagenermittlung", das die Hochschule Rosenheim für den Hauptverband der Deutschen Bauindustrie als Vertreter der Brancheninitiative "Normen im Trockenbau / Ausbau" erstellt hat. Im Projekt wurden relevante Normen für den Trockenbau / Ausbau hinsichtlich notwendiger Harmonisierungen, Unklarheiten und Erweiterungsmöglichkeiten untersucht. Für die Brancheninitiative wurden Handlungsoptionen aufgezeigt. KW - Trockenbau Y1 - 2015 VL - 2015 IS - 3 SP - 6 EP - 9 PB - FeuerTrutz Network GmbH CY - Köln ER - TY - JOUR A1 - Werning, Hanno A1 - Denkl, Maximilian A1 - Moarcas, Odette T1 - Hintergründe zum Nachweis des Glimmverhaltens JF - FeuerTrutz Magazin N2 - Der Artikel beschreibt die Hintergründe zum Nachweis des Glimmverhaltens für bestimmte Bauprodukte. Der Artikel ist eine gekürzte und stellenweise aktualisierte Fassung des Beitrages in Bauphysik 41 Heft 2, Seite 79-85 KW - Glimmverhalten KW - Brandverhalten KW - Dämmstoffe Y1 - 2020 N1 - Der Beitrag ist teilweise online verfügbar: https://www.feuertrutz.de/hintergruende-zum-nachweis-des-glimmverhaltens/150/75055/ (Nicht ganz vollständig) VL - 2020 IS - 1 SP - 28 EP - 32 PB - FeuerTRUTZ Network GmbH CY - Köln ER - TY - JOUR A1 - Werning, Hanno A1 - Denkl, Maximilian A1 - Moarcas, Odette T1 - Hintergründe zum Nachweis des Glimmverhaltens für bestimmte Baustoffe JF - Bauphysik N2 - Der Beitrag erläutert die Hintergründe des für einige Bauprodukte in Deutschland geforderten Nachweises, dass sie nicht glimmen und beschreibt die aktuelle rechtliche Situation. Er stellt das europäische Prüfverfahren EN 16733 kurz vor und legt die Folgen für Planer und Verwender der Bauprodukte dar. Schließlich wird ein Ausblick auf die zu erwartenden zukünftigen Entwicklungen gegeben. KW - Glimmverhalten KW - Brandverhalten KW - Dämmstoffe Y1 - 2019 UR - https://doi.org/10.1002/bapi.201800036 VL - 41 IS - 2 SP - 79 EP - 85 PB - Ernst & Sohn CY - Berlin ER -