TY - GEN A1 - Timpte, A. A1 - Mecking, S. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Vibration reduction indices of CLT junctions T2 - Proceedings of ICSV24 N2 - The multi-disciplinary research project “Vibroacoustic analysis in the planning process of timber constructions“ carried out in cooperation between the University of Applied Sciences Rosenheim, the ift Rosenheim and the Technical University Munich is a comprehensive study of direct as well as flanking structure-borne and airborne sound insulation of Cross Laminated Timber (CLT) elements and their junctions. The aim is to optimize and simplify the acoustical planning process of wooden multi-storey buildings and thereby to contribute to the increase growth of timber construction industry in Europe. For a prediction of the acoustical performance of solid wood constructions, the vibration reduction index Kij is needed. The vibration reduction index can be determined i.a. of the direction-averaged junction velocity level difference and the structural reverberation time. Both quantities need to be measured according to EN ISO 10848. Alternatively, vibration reduction indices for a T- or cross-junction can be derived following the procedures described in prEN ISO 12354-1:2016. However, further knowledge and data of the sound transmission across junctions of CLT is inevitable for a reliable prediction. In this paper a collection of frequency dependent vibration reduction indices for CLT structures will be presented and compared, involving L-, T- and cross-junctions measured by six international laboratories. KW - Schallmesstechnik KW - cross-laminated timber KW - vibration reduction index KW - structure-borne sound Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-4982 ER - TY - GEN A1 - Timpte, A. A1 - Mecking, S. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Stoßstellendämm-Maße von Brettsperrholzkonstruktionen T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA N2 - Ein Ziel des DFG-AiF-Clusterforschungsvorhabens Vibroakustik im Planungsprozess für Holzbauten ist die Reduktion des schalltechnischen Planungsaufwandes bei der Massivholzbauweise. Hierzu soll das Prognoseverfahren der DIN EN 12354 zur Ermittlung der Flankenübertragung für Holzbaukonstruktionen angepasst werden. Da es sich bei der Massivholzbauweise um keine starre Verbindungen wie beim Massivbau handelt, ist zur Berechnung der Flankenübertragung ein Maß für die Schallübertragung an den Stoßstellen erforderlich. Das sogenannte Stoßstellendämm-Maß Kij wird u.a. aus der richtungsgemittelten Differenz der Schnellepegel je Bauteil und der Körperschallnachhallzeit gebildet, welche nach der DIN EN ISO 10848 messtechnisch zu ermitteln sind. Alternativ wird im Entwurf E DIN EN 12354-1:2016 ein erster Vorschlag zur Berechnung des Stoßstellendämm-Maßes für einen T- und einen Kreuz-Stoß in Brettsperrholz aufgeführt. In diesem Beitrag werden Stoßstellendämm-Maße unterschiedlich ausgeführter Brettsperrholzkonstruktionen präsentiert und gegenübergestellt. Es handelt sich um frequenzabhängige Werte, die von internationalen Laboren gemäß DIN EN 10848 für L-, T- und Kreuz-Stöße ermittelt wurden. T2 - Vibration reduction indices of cross-laminated timber constructions KW - Schallmesstechnik KW - Holzbau KW - Brettsperrholz KW - Stoßstellendämm-Maß Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-4979 ER - TY - CHAP A1 - Rabold, A. A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzdecken Y1 - 2017 ER -