TY - JOUR A1 - Timpte, A. A1 - Mecking, S. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Stoßstellendämm-Maße von Brettsperrholzkonstruktionen JF - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2017 ER - TY - CHAP A1 - Timpte, A. A1 - Mecking, S. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Vibration reduction indices of CLT junctions T2 - Proceedings of ICSV24 N2 - The multi-disciplinary research project “Vibroacoustic analysis in the planning process of timber constructions“ carried out in cooperation between the University of Applied Sciences Rosenheim, the ift Rosenheim and the Technical University Munich is a comprehensive study of direct as well as flanking structure-borne and airborne sound insulation of Cross Laminated Timber (CLT) elements and their junctions. The aim is to optimize and simplify the acoustical planning process of wooden multi-storey buildings and thereby to contribute to the increase growth of timber construction industry in Europe. For a prediction of the acoustical performance of solid wood constructions, the vibration reduction index Kij is needed. The vibration reduction index can be determined i.a. of the direction-averaged junction velocity level difference and the structural reverberation time. Both quantities need to be measured according to EN ISO 10848. Alternatively, vibration reduction indices for a T- or cross-junction can be derived following the procedures described in prEN ISO 12354-1:2016. However, further knowledge and data of the sound transmission across junctions of CLT is inevitable for a reliable prediction. In this paper a collection of frequency dependent vibration reduction indices for CLT structures will be presented and compared, involving L-, T- and cross-junctions measured by six international laboratories. KW - Schallmesstechnik Y1 - 2017 ER - TY - CHAP A1 - Reichelt, H. A1 - Schanda, Ulrich A1 - Rabold, A. T1 - Reduction of Low-frequency Vibrations of Wooden Floors by Tuned Mass Dampers T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Holzbau Y1 - 2009 ER - TY - CHAP A1 - Rabold, A. A1 - Wissel, C. A1 - Schanda, Ulrich A1 - Hessinger, J. T1 - Prognose der Schalldämmung von leichten Trennwänden T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik KW - Leichtbau Y1 - 2010 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings T2 - Proceedings of Euronoise 2015 KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schramm, M. A1 - Châteauvieux-Hellwig, C. T1 - Stoßstellendämm-Maße von Massivholzelementen für die SEA basierte Berechnung nach EN 12354 T2 - Deutsche Gesellschaft für Akustik e.V. (ed.), Fortschritte der Akustik - DAGA KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - RPRT A1 - Rabold, A. A1 - Schramm, M. T1 - Vibroakustik im Planungsprozess für Holzbauten – Modellierung, numerische Simulation, Validierung – Teilprojekt 4: Bauteilprüfung, FEM-Modellierung und Validierung KW - Holzbau KW - Schallmesstechnik Y1 - 2015 ER - TY - CHAP A1 - Rabold, A. A1 - Schanda, Ulrich A1 - Hessinger, J. T1 - Korrelation zwischen Geher und Norm-Hammerwerk bei der Trittschallübertragung T2 - Deutsche Gesellschaft für Akustik e.V. DAGA KW - Schallmesstechnik Y1 - 2011 ER - TY - CHAP A1 - Rabold, A. A1 - Châteauvieux-Hellwig, C. A1 - Mecking, S. T1 - Optimierung von Holzdecken in Bezug auf die DIN 4109 T2 - Forum Holzbau HBS KW - Schallmesstechnik KW - Holzdecken Y1 - 2017 ER - TY - CHAP A1 - Rabold, A. T1 - Trittschalldämmung richtig bewerten T2 - 1. Internationale Schall- und Akustiktage KW - Schallmesstechnik KW - Schalldämmung Y1 - 2011 ER -