TY - RPRT A1 - Michanickl, Andreas A1 - Schemme, Michael A1 - Karlinger, Peter T1 - Schlussbericht zum Investitionsvorhaben "Entwicklung innovativer klima- und ressourcenfreundlicher Verfahren und Werkstoffe für den Fahrzeugbau, den Holzbau sowie den Möbelbau" : im Programm zur Förderung von strategischen Investitionen an Fachhochschulen FHInvest im Rahmen des Programms "Forschung an Fachhochschulen" : Akronym: MUNACU (Multifunktionale Naturfaser Kunststoff Composites) Y1 - 2017 U6 - https://doi.org/10.2314/GBV:1010839926 ER - TY - CHAP A1 - Hummel, Sabine A1 - Obermeier, Katharina A1 - Zier, Katja A1 - Schemme, Michael A1 - Krommes, Sandra A1 - Karlinger, Peter T1 - Closed-Loop Recycling von Organoblechen im Hybridverbund - Technische, wirtschaftliche und ökologische Betrachtung T2 - Technomer 2021 N2 - Mit steigenden Verbrauchs- und CO2-Anforderungen, aber auch dem Wandel zur Elektrifizierung des Antriebs verändert sich durch Leichtbauweise die werkstoffliche Zusammensetzung der Fahrzeuge. Faserverstärkte thermoplastische Kunststoffe substituieren zunehmend metallische Komponenten. Diese Hochleistungswerkstof-fe (sog. Organobleche) erfüllen nicht nur die steigenden Anforderungen an Leichtbau, sondern auch an die Wirtschaftlichkeit von Produktionsprozessen, sowie an die Designfreiheit einzelner Bauteile. Das Hybrid-Spritzguss-Verfahren in Verbindung mit Organoblechen hat sich in den vergangenen Jahren für die Herstellung von Funktionsbauteilen und Leichtbaustrukturen durchgesetzt. Der Vortrag befasst sich mit der werkstofflichen Rezyklierbarkeit von endlosglasfa-serverstärkten thermoplastischen Kunststoffen (Organobleche). Sortenreine Indust-rieabfälle werden dabei in einem Closed-Loop-Recyclingprozess zum Anspritzen von Funktionselementen in einem Serienbauteils genutzt. Die technische Machbarkeit als auch eine erste wirtschaftliche und ökologische Bewertung des Prozesses wird vorgestellt. KW - Closed-Loop KW - Recycling KW - Organobleche KW - Hybridbauteile KW - Thermoplast KW - Funktionalisierung KW - Kreislaufwirtschaft KW - Ökobilanzierung Y1 - 2021 SN - 978-3-939382-15-7 SP - 1 EP - 12 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - CHAP A1 - Hummel, Sabine A1 - Karlinger, Peter A1 - Schemme, Michael T1 - Haftungsuntersuchungen für Leichtbauanwendungen T2 - Technomer 2017 N2 - Die Verstärkung von Spritzgussteilen mit Faserhalbzeugen gewinnt immer mehr an Bedeutung. Für die Einsatztauglichkeit derartiger Bauteile ist die Verbundhaftung zwischen den angespritzten Strukturen und den Faserhalbzeugen essentiell. Der Vortrag befasst sich mit den äußeren und prozesstechnischen Einflüssen zu Erhöhung der Verbundhaftung auf Faserhalbzeugen. Zudem wird ein Einblick in die Prüf und Anlagentechnik in diesem Bereich gegeben. KW - Verbundhaftung KW - Organoblech KW - Thermoplast KW - Funktionalisierung KW - Einflussfaktoren KW - Hybridbauteil KW - Stukturbauteil Y1 - 2017 SN - 978-3-939382-13-3 SP - 1 EP - 11 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - JOUR A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Schemme, Michael A1 - List, Manuela A1 - Ruckdäschel, Holger T1 - Comparison of Melting Processes for WPC and the Resulting Differences in Thermal Damage, Emissions and Mechanics JF - Materials N2 - The necessity for resource-efficient manufacturing technologies requires new developments within the field of plastic processing. Lightweight design using wood fibers as sustainable reinforcement for thermoplastics might be one solution. The processing of wood fibers requires special attention to the applied thermal load. Even at low processing temperatures, the influence of the dwell time, temperature and shear force is critical to ensure the structural integrity of fibers. Therefore, this article compares different compounding rates for polypropylene with wood fibers and highlights their effects on the olfactory, visual and mechanical properties of the injection-molded part. The study compares one-step processing, using an injection-molding compounder (IMC), with two-step processing, using a twin-scew-extruder (TSE), a heating/cooling mixer (HCM) and an internal mixer (IM) with subsequent injection molding. Although the highest fiber length was achieved by using the IMC, the best mechanical properties were achieved by the HCM and IM. The measured oxidation induction time and volatile organic compound content indicate that the lowest amount of thermal damage occurred when using the HCM and IM. The advantage of one-time melting was evened out by the dwell time. The reinforcement of thermoplastics by wood fibers depends more strongly on the structural integrity of the fibers compared to their length and homogeneity KW - Wood fibers KW - compounding methods KW - volatile organic compounds KW - fiber length KW - mechanics; Y1 - 2022 U6 - https://doi.org/10.3390/ma15093393 VL - 15 IS - 9 PB - MDPI CY - Basel ER - TY - JOUR A1 - Hummel, Sabine A1 - Obermeier, Katharina A1 - Zier, Katja A1 - Krommes, Sandra A1 - Schemme, Michael A1 - Karlinger, Peter T1 - Analysis of Mechanical Properties Related to Fiber Length of Closed-Loop-Recycled Offcuts of a Thermoplastic Fiber Composites (Organo Sheets) JF - Materials N2 - Increasing demand for energy-efficient means of transport has steadily intensified the trend towards lightweight components. Thermoplastic glass fiber composites (organo sheets) play a major role in the production of functional automotive components. Organo sheets are cut, shaped and functionalized by injection molding to produce hybrid components, such as those used in car door modules. The cutting process produces a considerable amount of production waste, which has thus far been thermally recycled. This study develops a closed mechanical recycling process and analyzes the different steps of the process. The offcuts were shredded using two shredding methods and implemented directly in the injection-molding process. Using tensile tests and impact bending tests, the material properties of the recycled materials were compared with the virgin material. In addition, fiber length degradation via the injection-molding process and the influence of the waterjet-cutting process on the mechanical properties are investigated. Recycled offcuts are both comparable to new material in terms of mechanical properties and usability, and are also economically and ecologically advantageous. Recycling polypropylene waste with glass fiber reinforcement in a closed loop is an effective way to reduce industrial waste in a sustainable and economical production process. KW - sustainability KW - fiber composites KW - recycling KW - renewable materials KW - manufacturing process KW - resource efficiency KW - emissions KW - degradation KW - characterization Y1 - 2022 UR - https://doi.org/10.3390/ma15113872 VL - 15 IS - 11 SP - 3872 ER - TY - JOUR A1 - Obermeier, Frederik A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Thermoplastic Hybrid Composites with Wood Fibers: Bond Strength of Back-Injected Structures JF - Materials N2 - Due to their lightweight potential and good eco-balance, thermoplastic hybrid composites with natural fiber reinforcement have long been used in the automotive industry. A good alternative to natural fibers is wood fibers, which have similar properties but are also a single-material solution using domestic raw materials. However, there has been hardly any research into wood fibers in thermoplastic back-injected hybrid composites. This article compares the bond strength of an injection molded rib from polypropylene (PP) and wood fibers to different non-wovens. The non-wovens consisted of wood fibers (spruce) or alternatively natural fibers (kenaf, hemp), both with a polypropylene matrix. Pull-off and instrumented puncture impact tests show that, given similar parameters, the natural and wood-fiber-hybrid composites exhibit very similar trends in bond strength. Further tests using viscosity measurements, microscopy, and computed tomography confirm the results. Wood-fiber-reinforced thermoplastic hybrid composites can thus compete with the natural fiber composites in terms of their mechanical behavior and therefore present a good alternative in technical semi-structural applications. KW - biocomposites KW - wood fibers KW - polypropylene KW - back-injection molding KW - bond strength Y1 - 2022 UR - https://doi.org/10.3390/ma15072473 VL - 15 IS - 7 SP - 2473 ER - TY - CHAP A1 - Wiedl, Sebastian A1 - Karlinger, Peter A1 - Schemme, Michael A1 - List, Manuela T1 - Vergleich von unterschiedlichen Aufschmelzverfahren und die daraus resultierenden Eigenschaften für WPC-Spritzgussteile T2 - Technomer 2021 N2 - Leichtbau und ressourcenschonende Herstellungstechnologien sind zentrale Themen des 21. Jahrhunderts. Im Zuge dessen werden vermehrt Naturprodukte in der Kunststoffverarbeitung eingesetzt. Eine Sparte dabei bilden Holz-Polymer Werkstoffe (WPC), welche seit 2014 eine Verdoppelung in der Produktionsmenge erfahren haben. Dabei werden meist Holzpartikel statt Fasern als Füll- und Verstärkungsstoff eingesetzt. Der Vortrag befasst sich mit dem Vergleich von verschiedenen Aufbereitungsmöglichkeiten von WPCs mit Holzfaserverstärkung hinsichtlich Mechanik und thermischer Schädigung des temperaturempfindlichen Holzes. Teil der Untersuchung ist die einstufige Verarbeitung mittels eines Injection-Moulding-Compounders sowie die zweistufige Verarbeitung mittels Compounder und Heiz-Kühl-Mischer mit anschließendem Urformen an der Spritzgussmaschine. KW - Holzfasern KW - Compoundierverfahren KW - Spritzguss KW - Thermische Beanspruchung KW - Mechanik Y1 - 2021 SN - 978-3-939382-15-7 SP - 1 EP - 13 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - CHAP A1 - Obermeier, Frederik A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Verbundhaftung von thermoplastischen Hybridverbunden mit Natur-und Holzfaserverstärkung T2 - Technomer 2021 N2 - Leichtbau, ressourcenschonende Herstellungstechnologien und die Verwendung nachwachsender Rohstoffe sind zentrale Themen des 21. Jahrhunderts. Thermoplastische Hybridverbunde mit Naturfaserverstärkung sind seit langem Stand der Technik und werden vor allem in der Automobilindustrie verwendet. Holzfasern sind in diesem Bereich jedoch noch nicht umfassend untersucht. Der Vortrag befasst sich mit dem Potenzial von Holzfasern (Fichte) für thermoplastische Hybridverbunde im Vergleich zu Naturfasern (Kenaf, Hanf). Dabei werden mechanische Untersuchungen (Kopf-Zug-Versuch und instrumentierter Durchstoßversuch) von zwei hybriden Bauteilen gezeigt. Die Verbundhaftung wird bei unterschiedlichen Schädigungsmechanismen in Abhängigkeit ausgewählter Parameter dargestellt. Die relevanten Effekte werden ergänzend durch Mikroskopie und Computertomographie beschrieben. Es zeigt sich, dass thermoplastische Hybridverbunde mit Holzfasern mit dem Benchmark aus Naturfasern mechanisch konkurrieren können. Zudem zeigen Holzfasern andere Vorteile wie geringe Rohstoffrisiken. KW - Thermoplaste KW - Holzfasern KW - Naturfasern KW - Hybridverbunde KW - Verbundhaftung Y1 - 2021 SN - 978-3-939382-15-7 SP - 1 EP - 12 PB - Technische Universität Chemnitz CY - Chemnitz ER - TY - JOUR A1 - Obermeier, Frederik A1 - Schumacher, Mara A1 - Barth, Simon A1 - Karlinger, Peter A1 - Schemme, Michael A1 - Altstädt, Volker T1 - Verstärkung von Polypropylen mit Holzfasern durch Direkt-Compoundierung JF - Zeitschrift Kunststofftechnik N2 - Ergänzend zum bisherigen Stand der Wissenschaft und Technik wurden in dieser Veröffentlichung Fichtefasern aus einem thermo-mechanischen Aufschlussprozess über einen Spritzgusscompounder mit Polypropylen und Haftvermittler direkt compoundiert. Bei der direkten einstufigen Verarbeitung wurde ein steigender Holzfaseranteil bis 30 Gew.-% untersucht. Die Charakterisierung der Materialkombinationen erfolgte durch Zugversuche, Melt-Flow-Rate Messungen, Dichtebestimmung, Mikroskopie und Kerbschlagbiegeversuche. Bei steigendem Holzfaseranteil wird eine Steigerung der Zugeigenschaften, der Viskosität und der Dichte festgestellt. Die Kerbschlagzähigkeit bleibt bei steigendem Holzfaseranteil im Rahmen der Standardabweichung konstant, ist jedoch im Vergleich zum unveränderten Grundpolymer geringer. KW - Direkt-Compoundierung KW - Spritzgusscompounder KW - Holz KW - Holzfaser KW - Polypropylen Y1 - 2021 VL - 2021 IS - 2 SP - 87 EP - 111 PB - Carl Hanser Verlag CY - München ER - TY - JOUR A1 - Schemme, Michael A1 - Ehrenstein, Gottfried Wilhelm T1 - Lagebericht: Qualitätssicherung bei der Verarbeitung langfaserverstärkter Kunststoffe JF - Kunststoffe 84 KW - FVK Y1 - 1994 IS - Heft 11 ER - TY - JOUR A1 - Schemme, Michael A1 - Ehrenstein, Gottfried Wilhelm T1 - Quality Assurance in the Processing of Long Fibre Reinforced Plastics JF - Kunststoffe plast europe KW - FVK Y1 - 1994 ER - TY - CHAP A1 - Schemme, Michael A1 - Ehrenstein, Gottfried Wilhelm T1 - Charakterisierung von Faserverbund-Kunststoffen mit Methoden der Dynamisch-mechanischen Analyse (DMA) T2 - Tagungsband zum Fachseminar: Thermoanalytische Methoden in der Kunststoffprüfung KW - FVK Y1 - 1994 ER - TY - CHAP A1 - Schemme, Michael A1 - Ehrenstein, Gottfried Wilhelm T1 - Quality Assurance and Regularity of SMC-Materials T2 - Tagungsband 50th SPI Conference KW - FVK Y1 - 1995 CY - Cincinnati ER - TY - CHAP A1 - Schemme, Michael A1 - Ehrenstein, Gottfried Wilhelm T1 - Sicherung der Produktqualität bei der Herstellung und Verarbeitung von SMC-Werkstoffen T2 - Tagungsband zum SKZ-Fachseminar: SMC – Ein Werkstoff für anspruchsvolle Anwendungen KW - FVK Y1 - 1995 ER - TY - CHAP A1 - Hoffmann, L. A1 - Schemme, Michael A1 - Pavsek, V. A1 - Dratschmidt, F. A1 - Raue, F. A1 - Ehrenstein, Gottfried Wilhelm T1 - Hysteresis Measurements – Making Fatigue Testing more Expressive T2 - 1st International Conference on Mechanics of Time Dependent Materials KW - Plastic KW - Kunststoff Y1 - 1995 CY - Ljubljana ER - TY - CHAP A1 - Ehrenstein, Gottfried Wilhelm A1 - Schemme, Michael T1 - Glasfaserverstärkte Thermoplaste - Eine progressive Verbundalternative T2 - Tagungsband XVIII Int. Tagung Verstärkte Kunststoffe KW - FVK Y1 - 1995 ER - TY - CHAP A1 - Schemme, Michael A1 - Ehrenstein, Gottfried Wilhelm T1 - Qualitätssicherung bei der Herstellung und Verarbeitung von SMC T2 - Tagungsband XVIII Int. Tagung Verstärkte Kunststoffe KW - FVK Y1 - 1995 ER - TY - CHAP A1 - Schemme, Michael T1 - Anwendung von LFT im Automobilbau T2 - Tagungsband Int. SKZ-Fachtagung: Die Kunststoffkarosserie - Karosseriekonzepte mit Kunststoffen KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Material basics of long fibre reinforced thermoplastic materials T2 - Tagungshandbuch zum 2. EATC Automotive Seminar KW - FVK Y1 - 2020 SP - 1 EP - 7 ER - TY - CHAP A1 - Schemme, Michael T1 - Verfahrens- und Anwendungstechnik langfaserverstärkter Thermoplaste (LFT) T2 - Tagungsband Int. SKZ-Fachtagung: Langfaserverstärkte Thermoplaste in der Automobilindustrie KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Industry survey and material basics of long fibre reinforced thermoplastic materials T2 - Tagungshandbuch zum 3. EATC Automotive Seminar KW - FVK Y1 - 2020 SP - 1 EP - 10 ER - TY - CHAP A1 - Schemme, Michael T1 - Trends in light weight car applications: focusing on composites T2 - Tagungshandbuch zur Internationalen Rieter Automotive Conference KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Duroplastische und thermoplastische Verbundwerkstoffe T2 - Seminarband zum VDI Wissensforum Grundlagen der Kunststofftechnologie KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Präparation verstärkter und gefüllter Kunststoffe T2 - Tagungsband des 11. Hochschulseminars Präparation und Mikroskopie an Kunststoffen KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Duroplastische und thermoplastische Verbundwerkstoffe T2 - Seminarband zum VDI Wissensforum Grundlagen der Kunststofftechnologie KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Langfaserverstärkte Thermoplaste (LFT) – Entwicklungsstand und Perspektiven T2 - Tagungsband Int. SKZ-Fachtagung: Langfaserverstärkte Thermoplaste (LFT) KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Verfahrens- und Anwendungstechnik langfaserverstärkter Thermoplaste (LFT) T2 - Tagungsband Int. SKZ-Fachtagung: Technische Kunststoffe KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Faserverstärkte Kunststoffe im Fahrzeugbau T2 - Tagungsband Int. SKZ-Fachtagung: Kunststoffe im Automobil-Exterieur KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Light weight car applications with composites T2 - Tagungshandbuch zur Internationalen ABEX Automotive Conference KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Duroplastische und thermoplastische Verbundwerkstoffe T2 - Seminarband zum VDI Wissensforum Grundlagen der Kunststofftechnologie KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Glasmattenverstärkte Thermoplaste (GMT) im Automobilbau T2 - Tagungsband der Fachtagung Composites, Eidgenössische Materialprüfungs- und Forschungsanstalt KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Die Hecktür der DC A-Klasse; Entwicklung, Realisierung und Herstellung der ersten, vollthermoplastischen Rückwandtür T2 - Tagungsband Int. AVK-TV Fachtagung: Langfaserverstärkte Thermoplaste im Automobil KW - Kunststoff Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Präparation faserverstärkter Kunststoffe T2 - Tagungsband des VDI-Fachseminars: Präparationstechniken und Lichtmikroskopie an Kunststoffen KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Langfaserverstärkte Thermoplaste (LFT) – Entwicklungsstand und Perspektiven T2 - Tagungsband 10. Internationale AVK-Tagung für verstärkte Kunststoffe und technische Duroplaste KW - FVK Y1 - 2020 SP - 103 EP - 118 ER - TY - CHAP A1 - Schemme, Michael T1 - Verfahrens- und Anwendungstechnik langfaserverstärkter Thermoplaste (LFT) T2 - Tagungsband Int. SKZ-Fachtagung: Technische Kunststoffe Leistungspotentiale und Trends KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Faserverstärkte Kunststoffe im Fahrzeugbau T2 - Tagungsband Int. SKZ-Fachtagung: Automobil-Design und Kunststoff KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Langfaserverstärkte Thermoplaste (LFT) – Entwicklungsstand und Perspektiven T2 - Tagungsband zur Int. VDI Jahrestagung Spritzgießen 2004 KW - FVK Y1 - 2020 SP - 79 EP - 103 ER - TY - CHAP A1 - Schemme, Michael T1 - Werkstoffliche Grundlagen langfaserverstärkter Thermoplaste T2 - Tagungshandbuch zum 1. EATC Automotive Seminar KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - GMT / LFT-Materialien und ihre Anwendungen im Fahrzeugbau T2 - Tagungsband Int. SKZ-Fachtagung: Karosseriekonzepte mit Kunststoffen - Die Kunststoffkarosserie und ihre Auswirkungen KW - FVK Y1 - 2020 ER - TY - CHAP A1 - Schemme, Michael T1 - Long glass fiber reinforced thermoplastics – Material classification and characterisation T2 - Tagungsband 1. Int. EATC – Conference: Long Fibre reinforced thermoplastics for automotive applications KW - FVK Y1 - 2020 ER - TY - RPRT A1 - Schemme, Michael T1 - Sicherung der Produktqualität bei der Herstellung und Verarbeitung von SMC-Werkstoffen, Technisch – wissenschaftlicher Bericht KW - FVK Y1 - 1997 ER - TY - JOUR A1 - Schemme, Michael A1 - Avondet, M.A. A1 - Ehrenstein, Gottfried Wilhelm T1 - Charakterisierung von Faserverbund-Kunststoffen mit Methoden der Dynamisch-Mechanischen Analyse (DMA) JF - Zeitschrift Materialprüfung KW - FVK Y1 - 1997 IS - Heft 1-2/97 ER - TY - BOOK A1 - Ehrenstein, Gottfried Wilhelm A1 - Bittmann, Eva A1 - Hoffmann, Leo A1 - Schäfer, Harald A1 - Schemme, Michael A1 - Wolfrum, Johannes T1 - Duroplaste - Aushärtung, Prüfung, Eigenschaften KW - Kunststoff KW - Duroplaste Y1 - 1997 SN - 978-3446189171 PB - Carl Hanser Verlag CY - München ER - TY - JOUR A1 - Schemme, Michael T1 - Verschmähte neuartige Kunststoffe JF - Neue Züricher Zeitung KW - Kunststoff Y1 - 2003 IS - Sonderbeilage: Schweizer Autozulieferer, Nr. 143 SP - Seite B7 ER - TY - JOUR A1 - Schemme, Michael T1 - Prüfverfahren für Langfaserverstärkte Thermoplaste JF - Kunststoffe KW - FVK Y1 - 2003 VL - 2003 IS - 08 SP - 106 EP - 109 ER - TY - JOUR A1 - Schemme, Michael T1 - LFT – development status and perspectives JF - Reinforced Plastics KW - FVK Y1 - 2008 UR - https://doi.org/10.1016/S0034-3617(08)70036-5 VL - 52 IS - 1 SP - 32 EP - 39 ER - TY - JOUR A1 - Schemme, Michael T1 - Longfibre reinforced thermoplastics – status and perspectives JF - Plastics, Additives and Compounding KW - FVK Y1 - 2008 UR - https://doi.org/10.1016/S1464-391X(08)70060-6 VL - 10 IS - 2 SP - 38 EP - 43 ER - TY - CHAP A1 - Schemme, Michael T1 - Duroplastische und thermoplastische Verbundwerkstoffe T2 - Seminarband zum VDI Wissensforum Grundlagen der Kunststofftechnologie KW - FVK Y1 - 2008 ER - TY - CHAP A1 - Schemme, Michael T1 - Verfahrens- und Anwendungstechnik langfaserverstärkter Thermoplaste (LFT) T2 - Tagungsband Int. SKZ-Fachtagung: Technische Kunststoffe Leistungspotentiale und Trends KW - FVK Y1 - 2008 ER - TY - CHAP A1 - Schemme, Michael T1 - Präparation verstärkter und gefüllter Kunststoffe T2 - Tagungsband des 12. Hochschulseminars Präparation und Mikroskopie an Kunststoffen KW - FVK Y1 - 2008 ER -