TY - CHAP A1 - Schramm, Markus A1 - Dolezal, Franz A1 - Rabold, Andreas A1 - Schanda, Ulrich T1 - Stoßstellen im Holzbau - Planung, Prognose und Ausführung T2 - Fortschritte der Akustik - DAGA KW - Normung KW - Holzmassivbau KW - Flankenübertragung KW - Stoßstellen KW - Vibroakustik KW - Konstruktion Y1 - 2010 ER - TY - JOUR A1 - Holtz, Fritz A1 - Hessinger, Joachim A1 - Rabold, Andreas A1 - Buschbacher, Hans-Peter T1 - Schallschutz - Wände und Dächer JF - Informationsdienst Holz, Holzbau Handbuch KW - HolzLeichtBau KW - Holzmassivbau KW - Luftschall KW - Dach KW - Wand Y1 - 2004 VL - 3 IS - 3 ER - TY - JOUR A1 - Rabold, Andreas A1 - Kollmannsberger, Stefan A1 - Rank, Ernst T1 - Schallschutz im mehrgeschossigen Holzbau: Luft- und Trittschalldämmung von Trenndecken JF - Bauingenieur KW - Holzmassivbau KW - Trittschall KW - Trittschalldämmung KW - Decke Y1 - 2014 SP - 370 EP - 381 ER - TY - CHAP A1 - Châteauvieux-Hellwig, Camille A1 - Schanda, Ulrich A1 - Rabold, Andreas A1 - Schramm, Markus T1 - Messmethodenvergleich für das Stoßstellendämm-Maß von Massivholzelementen: Vibroakustik im Planungsprozess für Holzbauten, Teil 3 T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - Holzmassivbau KW - Messtechnik KW - Dämpfung KW - Flankenübertragung KW - Stoßstellen KW - Vibroakustik Y1 - 2014 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Prediction of noise from machinery in timber-frame buildings using transmission functions T2 - Proceedings of ICSV24 KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - ZukunftBauUebertragung KW - Impulshammer Y1 - 2017 SN - 978-1-906913-27-4 ER - TY - CHAP A1 - Schöpfer, Fabian A1 - Hopkins, Carl A1 - Mayr, Andreas R. A1 - Schanda, Ulrich T1 - Ansätze zur Prognose des Installationspegels im Holz-Leichtbau T2 - Fortschritte der Akustik - DAGA KW - Körperschall KW - HolzLeichtBau KW - Holzmassivbau KW - Körperschallquellen KW - ZukunftBauUebertragung KW - Impulshammer Y1 - 2017 SN - 978-3-939296-12-6 ER - TY - GEN A1 - Mecking, Simon A1 - Schoenwald, Stefan A1 - Schanda, Ulrich T1 - Material characterisation of Cross Laminated Timber using experimental wave velocities T2 - Proceedings of Euronoise 2018 N2 - In multi story buildings the use of Cross Laminated Timber (CLT) is increasing. Therefore, sound insulation requirements have to be met and the prediction of sound insulation for this construction type is necessary. With the exception of low frequencies, Statistical Energy Analysis (SEA) is used in building acoustics for this purpose, which requires material properties as input data. The material characterisation of Cross Laminated Timber is a challenge. On the one hand, the composite material consists of several layers of boards; on the other hand, wood itself is inhomogeneous, anisotropic and has a low shear modulus. Differences in the manufacturing process such as the use of glue and grooves also have an impact on the overall rigidity of the plate. A characterisation based on thin plate theory is insufficient for the frequency range of building acoustics. One possibility to address this challenge is the experimental determination of frequency dependent phase velocities of bending waves in a plate that account for the above-mentioned effects. From the wave velocities the modal density used in SEA can be calculated very efficiently. This contribution focus on the time-of-flight method and phase difference method to determine phase velocities. In a case study, the direction-dependent global stiffness parameters were determined using first shear deformation theory. The measurement conditions and evaluation procedures are discussed. KW - Körperschall KW - Holzmassivbau KW - Materialeigenschaften KW - structure-borne sound KW - cross-laminated timber KW - orthotropic plate KW - wavenumber analysis KW - stiffness properties Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-25448 ER - TY - CHAP A1 - Châteauvieux-Hellwig, Camille A1 - Mecking, Simon A1 - Brummer, Benjamin A1 - Rabold, Andreas T1 - Anwendung zur SEA basierten Berechnung nach EN 12354 für Massivholzelemente T2 - Fortschritte der Akustik - DAGA KW - Berechnungsmethoden KW - Holzmassivbau KW - Flankenübertragung KW - Vibroakustik KW - Simulation Y1 - 2016 ER - TY - RPRT A1 - Schanda, Ulrich A1 - Mayr, Andreas R. A1 - Schöpfer, Fabian T1 - FHprofUnt 2012: Nachhaltiger Schallschutz gebäudetechnischer Anlagen in energetisch optimierten Gebäuden: Teilprojekt 2: Schlussbericht KW - Gebäudetechnische Anlagen KW - Holzleichtbau KW - Holzmassivbau KW - Installationen KW - Körperschallquellen KW - Schallschutz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:861-opus4-25463 ER - TY - RPRT A1 - Rabold, Andreas A1 - Wohlmuth, Barbara A1 - Horger, Thomas A1 - Rank, Ernst A1 - Kollmannsberger, Stefan A1 - Frischmann, Felix A1 - Paolini, Alexander A1 - Schanda, Ulrich A1 - Mecking, Simon A1 - Kruse, Tobias A1 - Châteauvieux-Hellwig, Camille A1 - Schramm, Markus A1 - Müller, Gerhard A1 - Buchschmid, Martin A1 - Winter, Christoph T1 - Vibroakustik im Planungsprozess für Holzbauten: Modellierung, numerische Simulation, Validierung: Dachbericht zum Forschungsvorhaben KW - Holzmassivbau KW - Flankenübertragung KW - Vibroakustik KW - FiniteElementeMethode KW - SEA KW - Schwingungen KW - Elastomerlager Y1 - 2018 ER -