<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>667</id>
    <completedYear>2011</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>bookpart</type>
    <publisherName>ASM International</publisherName>
    <publisherPlace>Ohio</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">DRAM Failure Analysis and Defect Localization Techniques, Microelectronics Failure Analysis</title>
    <abstract language="eng">Comprehensive guide to the process and test methods used for electronic device failure analysis. Contains dozens of articles—contributed by industry experts—covering a wide range of topics involving the failure analysis of microelectronics. It places the most important and up-to-date information on this subject at your fingertips. &#13;
Topic coverage includes: &#13;
Failure Analysis Process Flow&#13;
Failure Verification &#13;
Failure Modes and Failure Classification &#13;
Special Devices (MEMS, Optoelectronics, Passives) &#13;
Fault Localization Techniques: Package Level (NDT) &#13;
Die Level (Depackaging, Photon Emission, Microthermography, Laser-Based Methods, Particle Beam Methods) &#13;
Deprocessing &amp; Imaging Techniques: Deprocessing &#13;
General Imaging Techniques &#13;
Local Deprocessing &amp; Imaging &#13;
Circuit Edit and Design Modification &#13;
Material Analysis Techniques &#13;
Reference Information: Important Topics for Semiconductor Devices &#13;
Failure Analysis Techniques Roadmap &#13;
Failure Analysis Operations and Management &#13;
Appendices: Failure Analysis Terms, Definitions, and Acronyms &#13;
Industry Standards</abstract>
    <parentTitle language="eng">Desk Reference Sixth Edition</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microelectronics</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DRAM Failure Analysis</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>669</id>
    <completedYear>2011</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Worst Case Test Conditions for Defect Localization in DRAM Devices</title>
    <parentTitle language="eng">Microelectronics Seminar of the ISTFA 2011</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DRAM Devices</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microelectronics</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>746</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">ANALYTICAL ATTITUDE DETERMINATION FROM A SPECIFIC RATE PROFILE</title>
    <abstract language="eng">The problem dealt with in this paper is the analytical determination of the attitude of a rigid body which undergoes a given rate profile. Usually the attitude is determined by solving the kinematic differential equation numerically. For long lasting movements the outcome can cost computation time plus encountered losses in accuracy, which can be disturbing especially in optimization problems. This contribution solves the kinematic differential equation for certain rate profiles exactly and compares the results in accuracy and computation time with the standard procedures.</abstract>
    <parentTitle language="eng">40th ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE, Breckenridge, Colorado, USA</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Zentgraf</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Attitude determination</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>kinematic differential equation</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>satellites</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>302</id>
    <completedYear>2000</completedYear>
    <publishedYear>2000</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>2000</volume>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>Fachhochschule Rosenheim</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">OPC - die Schnittstelle des PC für die Automatisierungstechnik</title>
    <parentTitle language="deu">Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Wolfgang Schittenhelm</author>
    <author>T. Berndt</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Automatisierungstechnik</value>
    </subject>
    <collection role="ddc" number="50">Naturwissenschaften</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>303</id>
    <completedYear>2001</completedYear>
    <publishedYear>2001</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>2001</volume>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>Fachhochschule Rosenheim</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">WEBROB – Ein Roboter im Internet</title>
    <parentTitle language="deu">Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Wolfgang Schittenhelm</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Roboter</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Internet</value>
    </subject>
    <collection role="ddc" number="50">Naturwissenschaften</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>306</id>
    <completedYear>2013</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>143</pageFirst>
    <pageLast>153</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Deutscher Industrieverlag</publisherName>
    <publisherPlace>München</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Energieeffiziente Regelung der Lüftung und Klimatisierung eines Reinraumes für die Kunststoffproduktion</title>
    <parentTitle language="deu">Tagungsband AALE (Angewandte Automatisierungstechnik in Lehre und Entwicklung), 10. Fachkonferenz, 28. Februar – 1. März 2013, Stralsund.</parentTitle>
    <identifier type="isbn">978-3-8356-3364-3</identifier>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Wolfgang Schittenhelm</author>
    <author>Peter Karlinger</author>
    <author>Josef Oberauer</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>energieeffiziente Klimatisierung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>energieeffiziente Lüftung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststoffprodukion</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>300</id>
    <completedYear>1998</completedYear>
    <publishedYear>1998</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>1998</volume>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>Fachhochschule Rosenheim</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">SEPP: ein studentisches Projekt der Elektrotechnik</title>
    <parentTitle language="deu">Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Wolfgang Schittenhelm</author>
    <author>K. Fischer</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Elektrotechnik Studienprojekt</value>
    </subject>
    <collection role="ddc" number="50">Naturwissenschaften</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>301</id>
    <completedYear>2000</completedYear>
    <publishedYear>2000</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>2000</volume>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>Fachhochschule Rosenheim</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Studentische Projektarbeit im Labor Automatisierungstechnik</title>
    <parentTitle language="deu">Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Wolfgang Schittenhelm</author>
    <author>Andreas König</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Automatisierungstechnik</value>
    </subject>
    <collection role="ddc" number="50">Naturwissenschaften</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>749</id>
    <completedYear>2009</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-05-07</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">MAGNETIC RATE DAMPING FOR SATELLITES IN LEO</title>
    <abstract language="eng">This article deals with the topic of damping the rates of a satellite after separation from the launcher by sensing the rates with magnetometers or gyroscopes and actually damping it with torquerods or thrusters. &#13;
&#13;
In literature problems of this kind are treated by linearization which is not adequate here due to the high nonlinearity of the problem caused by the high gyroscopic torque.  This paper addresses the observability and controllability of the rate dynamics for symmetric satellite bodies. &#13;
&#13;
Furthermore, robust stability of any bodies is investigated by means of the Krasovskii–LaSalle principle which is a variant of Ljapunov’s Second Method. It is found that – apart from one exception - the system is robustly stable for certain conditions depending only on the gain matrix and not depending on the orbit, moments of inertia or initial conditions. The exception is that of the intuitive case of an equator type orbit, in which the satellite rotates around the magnetic field lines, in this case the satellite’s rate cannot be damped.  &#13;
&#13;
Several design configurations are analysed with respect to their performance and cost: Rate damping with magnetometers or gyroscopes as sensors, and torquerods and thrusters as actuators. The results are evaluated with respect to the time to reach the desired rate, the propellant and the power equivalent battery mass used. &#13;
&#13;
The goal is to use the results to allow an AOCS equipment and architecture trade-off at an early project phase.  The design of the rate damping control of the SWARM project is presented as an example and demonstrated with simulations.</abstract>
    <parentTitle language="eng">32nd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Zentgraf</author>
    <author>D. Reggio</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Magnetic Rate Damping</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Satellites</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>symmetric satellite bodies</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>304</id>
    <completedYear>2003</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>Nr. 9 + 10/2003</issue>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName>Verlag moderne Industrie</publisherName>
    <publisherPlace>Landsberg am Lech</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Pneumatiksystem im Selbstbau</title>
    <parentTitle language="deu">Zeitschrift fluid</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>A. Piepenbrink</author>
    <author>Wolfgang Schittenhelm</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Pneumatiksystem</value>
    </subject>
    <collection role="ddc" number="50">Naturwissenschaften</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>665</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Introduction to microcomputer technology with the MSP430 Launch Pad in remote labs</title>
    <abstract language="eng">Texas Instruments' MSP430 Launch Pad is used as a key component for remote labs that complement an introduction course to microcomputer technology in the bachelor program Mechatronic at the University of Applied Sciences in Rosenheim. The remote labs use breakout boards and include a timer experiment with generation of pulse width modulation signals, I2C communication and analog to digital conversion.</abstract>
    <parentTitle language="eng">Global Engineering Education Conference (EDUCON), 2014 IEEE</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author>S. Kipfelsberger</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microelectronics</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microcomputer</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>MSP430 Launch Pad</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>662</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Model-Based Reference Design Projects with MathWorks' HDL Workflow Advisor for Custom-Specific Electronics with the Zedboard</title>
    <abstract language="eng">Reference design projects are implemented to the Xilinx Zynq on the Zedboard which is extended by user defined electronic hardware connected through the Zedboard's FMC (FPGA Mezzanine Card) connector. The implementation method with HDL Workflow Advisor includes constraint definitions for modified reference design projects for use with digital input and outputs and Zynq's XADC (Analog-Digital converter) which is characterized and compared to its data sheet. The bandwidth of the Zynq's internal AXI (Advanced eXtensible Interface) bus connected to the Simulink host PC is determined.</abstract>
    <parentTitle language="eng">ANALOG 2016; 15. ITG/GMM-Symposium, Bremen, Germany</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author>F. Kipfelsberger</author>
    <author>F. Soekmen</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Zedboard</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>MathWorks' HDL</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Custom specific electronics</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>471</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>2/2014</issue>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-28</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Rückblick auf die Benediktbeurer Reinraumtage 2014 Schriftliches Interview</title>
    <parentTitle language="deu">Cleanroom Magazin</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>472</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-28</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Einfluss der Verarbeitung auf die Bauteilqualität</title>
    <parentTitle language="deu">4. VDI-Fachkonferenz Kunststoffe in optischen Systemen</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststoffe</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>optische Systeme</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>470</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Optimierungspotenziale beim Spritzgießen durch Prozessüberwachung und moderne Regelmethoden</title>
    <parentTitle language="deu">Spritzgießertagung Baden-Baden</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Michael Späth</author>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Spritzguss</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Prozessüberwachung</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>462</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>report</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-27</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A new procedure for calculating cycle time in injection molding based on plastic part geometry recognition</title>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>Jorge Manuel Mercado-Colmenero</author>
    <author>Miguel Angel Rubio-Paramio</author>
    <author>Cristina Martin-Doñate</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Spritzguss</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>463</id>
    <completedYear>2015</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Neue Naturfaser - Kunststoffverfahren und - werkstoffe für den Fahrzeug-, Holz- und Möbelbau</title>
    <parentTitle language="deu">2. Kooperationsforum „Holz als neuer Werkstoff“ Regensburg</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Markus Schemme</author>
    <author>Andreas Michanickl</author>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Holz</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Naturfaser-Kunststoffverfahren</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>464</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-27</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Internationales Kunststoffsymposium São Paulo MODERAÇÃO</title>
    <parentTitle language="deu">Visão Geral - 4.0 Aktueller Stand und Entwicklung</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststoffe</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>394</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>report</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Prozessoptimierung und Energieeffizienz: Forschung an Reinräumen in der Kunststoffproduktion</title>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>395</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Kunststoffe für Produkte in Reinraumanwendungen</title>
    <parentTitle language="deu">17. Expertentage – Innovationen</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>453</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>report</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Kompetenz-Zentrum Holz-Kunststoff, Partnering-Veranstaltung für Holz- und biobasierte Werkstoffe und Verbundwerkstoffe</title>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>M. Schemme</author>
    <author>A. Michanickl</author>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>biobasierte Werkstoffe</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Holzwerkstoffe</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Verbundwerkstoffe</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>454</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Determination of the flow and curing behavior of highly filled phenolic injection molding compounds by means of spiral mold</title>
    <parentTitle language="eng">PPS Chemnitz</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>T. Scheffler</author>
    <author>M. Gehde</author>
    <author>M. Späth</author>
    <author>Peter Karlinger</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Spritzguss</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>molding compounds</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>455</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>4.Quartal 2017</issue>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-27</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Multifunktionale Naturfaser-Kunststoff-Composites</title>
    <parentTitle language="deu">Firmenzeitschrift Motan</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>T. Schwachulla</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Naturfaser-Kunststoff-Composites</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>458</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-27</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Einfluss des zeitabhängigen Materialzustands beim Spritzgießen von rieselfähigen, duromeren Formmassen auf den Prozess und die Bauteileigenschaften</title>
    <parentTitle language="deu">Technomer Chemnitz</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Michael Späth</author>
    <author>Markus Zillmer</author>
    <author>Peter Karlinger</author>
    <author>Michael Schemme</author>
    <author>Michael Gehde</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Spritzguss</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>459</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>9/2017</issue>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-27</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Homogenität ist der Schlüssel</title>
    <parentTitle language="deu">Kunststoffe</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>M. Schadhauser</author>
    <author>J. Martin</author>
    <author>M. Würtele</author>
    <author>N. Modler</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststoffe</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>389</id>
    <completedYear>2008</completedYear>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>other</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Spritzgießmaschinen und Spritzgießen</title>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Spritzguss</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>390</id>
    <completedYear>2013</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Kunststoff-Fertigung unter quasi Reinraumbedingungen, eine Produktionsumgebung für aktuelle und neue Technologien Bitte partikelfrei!</title>
    <parentTitle language="deu">Technische Sauberkeit in der Kunststoff-Fertigung</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>392</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>workingpaper</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Kunststoff-Fertigung unter quasi Reinraumbedingungen  Vortrag zum Clustertreffen Medizintechnik.</title>
    <parentTitle language="deu">Clustertreffen Medizintechnik</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>387</id>
    <completedYear>2015</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Benedigtbeuerer Reinraumtage</title>
    <parentTitle language="deu">Benedigtbeuerer Reinraumtage, Tagungshandbücher, 2002 – 2015.</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>G. Dittel</author>
    <author>E. Bürkle</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>388</id>
    <completedYear>2006</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>bookpart</type>
    <publisherName>Carl Hanser Verlag</publisherName>
    <publisherPlace>München</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Werkzeugkonstruktion</title>
    <parentTitle language="deu">: Werkzeugbau in der Kunststoffverarbeitung</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Werkzeugkonstruktion</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>664</id>
    <completedYear>2014</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Introduction to Verification and Test Using a 4-Bit Arithmetic Logic Unit Including a Failure Module in a Xilinx XC9572XL CPLD</title>
    <parentTitle language="eng">Proceedings of the 40th ISTFA 2014</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author>M. Hayn</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microelectronics</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Xilinx XC9572XL CPLD</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>658</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Plattformunabhängige modellbasierte Entwicklung von hochdynamischen Antriebsregelungen</title>
    <parentTitle language="deu">MATLAB EXPO 2017 Deutschland, München, 27. Juni 2017</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Julia Höllthaler</author>
    <author>Rainer Hagl</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Elektrische Antriebssysteme</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Leistungselektronik </value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>hochdynamische Antriebsregelungen</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>659</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">FPGA-based High Dynamic Servo Drive Control with a 200kHz Gallium Nitride Inverter</title>
    <abstract language="eng">Increased productivity in industrial processes can be achieved by dynamic and accurate positioning of servo drives. Therefore, improvement of servo drive dynamics using latest technologies in the key components such as inverter, control system and position measuring device are investigated. Using Gallium Nitride (GaN) or Silicon Carbide (SiC) semiconductors for motor inverters enables energy efficient operation up to pulse width modulation (PWM) frequencies of 500 kHz. This allows motor filters with small component sizes. As a result, high motor efficiency, low torque ripple, high control bandwidth and almost ideal sinusoidal output voltages are achieved. Experiments on a 200 kHz Gallium Nitride inverter with sine wave motor filter show a current control loop bandwidth of 3.2 kHz and almost ideal sinusoidal phase voltages. The achieved bandwidths of the speed and position control loops are 318 Hz and 106 Hz, respectively.</abstract>
    <parentTitle language="eng">2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, Poland</parentTitle>
    <identifier type="url">https://doi.org/10.23919/EPE17ECCEEurope.2017.8098997</identifier>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Franz Stubenrauch</author>
    <author>Josef Wittmann</author>
    <author>Alexander Kiermayer</author>
    <author>Norbert Seliger</author>
    <author>Rainer Hagl</author>
    <author>Doris Schmitt-Landsiedel</author>
    <author>Ralph Kennel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Servo drive control</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Gallium Nitride Inverter</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>electrical drive</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>473</id>
    <completedYear>2015</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>11/2015</issue>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName>Carl Hanser Verlag</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Optimieren durch Simulieren</title>
    <parentTitle language="deu">Kunststoffe</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Markus Hartmann</author>
    <author>Peter Karlinger</author>
    <author>Martin Würtele</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Simulation</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststofftechnik</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>657</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Hybrid Current and Acceleration Control of Servo Drives</title>
    <abstract language="deu">A hybrid current and acceleration control is presented and shown to improve the load disturbance behavior of servo drives significantly without additional sensor effort. The feedback signal of the acceleration control loop is calculated from the position data of the motor encoder. Hence, position measuring errors influence this control loop and lead to speed ripple. Therefore, the presented design of the acceleration control loop considers both load sensitivity and position measuring errors.</abstract>
    <parentTitle language="eng">PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nürnberg</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Josef Wittmann</author>
    <author>Rainer Hagl</author>
    <author>Ralph Kennel</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Elektrische Antriebssysteme</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Leistungselektronik </value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Servo drives</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electrical drives</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>655</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Gleichlaufschwankungen in Servoantrieben</title>
    <parentTitle language="deu">Fortschritte in der Antriebs- und Automatisierungstechnik (FAA), Stuttgart</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Josef Wittmann</author>
    <author>Rainer Hagl</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Elektrische Antriebssysteme</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Leistungselektronik </value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Automatisierungstechnik</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>656</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of Position Measuring Errors on Speed Ripple in Servo Drives</title>
    <abstract language="deu">Position measuring devices with sinusoidal measuring signals are widely used in position-controlled servo drives in industrial automation, e.g., for machine tools or semiconductor production machines. Usually, the feedback signal for the speed or velocity controller is calculated from the measured position. Therefore, position measuring errors affect these control loops. This study presents an analytic error model that considers non-ideal sinusoidal measuring signals with basic deviations (amplitude differences, offset errors, and phase shift) as well as signal harmonics. The model was used to systematically investigate the influence of signal quality and the number of signal periods from position measuring devices on speed ripple, across a wide range of speeds. A test stand with a high-resolution reference angle measuring device was used to confirm the results.</abstract>
    <parentTitle language="eng">2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM, Capri, Italy</parentTitle>
    <identifier type="url">https://doi.org/10.1109/SPEEDAM.2016.7525816</identifier>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Josef Wittmann</author>
    <author>Rainer Hagl</author>
    <author>Ralph Kennel</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Elektrische Antriebssysteme</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Leistungselektronik </value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Automatisierungstechnik</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Power Electronics</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electrical Drives</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Automation and Motion</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>654</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>1-2</issue>
    <volume>2016</volume>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-06-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Positionsmessfehler in Servoantrieben</title>
    <parentTitle language="deu">Antriebstechnik</parentTitle>
    <enrichment key="PeerReviewed">Ja</enrichment>
    <author>Josef Wittmann</author>
    <author>Rainer Hagl</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Elektrische Antriebssysteme</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Leistungselektronik </value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Servoantrieb</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Positionsmessung</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>467</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-28</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Neue Regler für Plastizfierungen an Spritzgießmaschinen</title>
    <parentTitle language="deu">Zeitschrift Kunststoffe</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>Markus Zillmer</author>
    <author>Peter Zentgraf</author>
    <author>Martin Würtele</author>
    <author>Günther Grimm</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Spritzguss</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Spritzgießmaschinen</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>660</id>
    <completedYear>2018</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>VDE-Verlag</publisherName>
    <publisherPlace>Berlin</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Differentielle LVDS Schnittstelle für modellbasierte Entwürfe mit MathWorks HDL Coder</title>
    <parentTitle language="deu">15. AALE Konferenz zu Cyberphysischen Produktionssystemen, 2018</parentTitle>
    <identifier type="isbn">978-3-8007-4522-7</identifier>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author>R. Treichl</author>
    <author>M. Kaltenecker</author>
    <author>H. El Shahawy</author>
    <author>T. T. Thomas</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>LVDS Schnittstellen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>MathWorks HDL Coder</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Cyberphysische Produktionssysteme</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>661</id>
    <completedYear>2017</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>64</pageFirst>
    <pageLast>67</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>76-77</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A row hammer pattern analysis of DDR2 SDRAM</title>
    <abstract language="eng">A DDR2 SDRAM test setup implemented on the Griffin III ATE test system from HILEVEL Technologies is used to analyse the row hammer bug. Row hammer pattern experiments are compared to standard retention tests. &#13;
The analysis confirms that the row hammer effect is caused by a charge excitation process depending on the number of stress activation cycles. The stress has to occur in the local neighborhood of the cells under test. &#13;
Shallow impurity levels support the responsible charge carrier transport process in the used DDR2 SDRAM technology</abstract>
    <parentTitle language="eng">Microelectronics Reliability</parentTitle>
    <identifier type="url">https://doi.org/10.1016/j.microrel.2017.07.022</identifier>
    <enrichment key="PeerReviewed">Ja</enrichment>
    <author>Martin Versen</author>
    <author>W. Ernst</author>
    <author>P. Gulati</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microelectronics</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>pattern analysis</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>663</id>
    <completedYear>2015</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Test setup for reliability studies of DDR2 SDRAM</title>
    <abstract language="eng">A DDR2 DRAM test setup is developed and implemented on the Griffin III ATE test system from HILEVEL Technologies. The test system provides a raw platform for performing various mixed signal and digital tests. In order to configure patterns easily in a vector format, a software platform is developed to manage test patterns according to the user's analysis needs. As examples, retention test patterns with disabled self-refresh are applied to 2 Gbit DDR2 SDRAM of two different DRAM vendors. The devices are characterized in respect to their intrinsic leakage and data retention behavior under the influence of stress conditions such as temperature or access algorithm. The tests are automated and test data is logged for an off-line data analysis. Data is recorded before and after solder simulation steps in order to observe a retention time degradation.</abstract>
    <parentTitle language="eng">Microelectronics Reliability</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author>W. Ernst</author>
    <author>P. Gulati</author>
    <author>G. Singh</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microelectronics</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DRAM retention solder simulation</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>748</id>
    <completedYear>2009</completedYear>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>other</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-05-07</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">IMPACT OF ELECTRIC PROPULSION UNCERTAINTY ON ORBIT PREDICTION</title>
    <abstract language="eng">This paper analyses the achievable performance of the orbit prediction for a geostationary satellite using clusters of electrical propulsion (EP) thrusters for station-keeping and a star tracker based attitude control system. &#13;
&#13;
The challenge in the orbit prediction is that the real electrical propulsion thrust is known with limited accuracy only. In combination with thrust pointing errors, these inaccuracies can accumulate to large orbit position errors during long low thrust burn arcs. &#13;
&#13;
The discrepancy between real and predicted satellite position is determined in terms of probability and as a worst case scenario.</abstract>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Zentgraf</author>
    <author>S. Erb</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Orbit prediction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electric propulsion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Satellite position</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>391</id>
    <completedYear>2013</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-23</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">"Bitte nicht Stören" - Analyse des Störgrößeneinflusses auf Prozess und Qualität</title>
    <parentTitle language="deu">23. Fachtagung TECHNOMER 2013 14./15. November 2013</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>J. Eben</author>
    <author>Peter Karlinger</author>
    <author>M. Gehde</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Analyse Störgrößeneinfluss</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>474</id>
    <completedYear>2013</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>book</type>
    <publisherName>Carl Hanser Verlag</publisherName>
    <publisherPlace>München</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-28</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Reinraumtechnik in der Kunststoffverarbeitung</title>
    <identifier type="isbn">ISBN 978-3-446-43,428-8</identifier>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author> Bürkle</author>
    <author> Wobbe</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reinraum</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststoffverarbeitung</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>666</id>
    <completedYear>2012</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">System for real-time data acquisition and processing on a hail-fighter aeroplane</title>
    <abstract language="eng">The System HAILsens implements a device for Real-Time sensor data processing, running on a Texas Instruments Concerto M3 core. An I2C interface is used for sensor communications. Ethernet with UDP on a custom developed three layered frame organisation of sensor data serves as a link to the main system on board of an aeroplane. For backing up the acquired data, all frames are locally stored on an SD Card. To have the possibility of easily checking the current system status, an LCD module and a push-button provide a minimal user interface.</abstract>
    <parentTitle language="eng">Proceedings of the 5th European DSP Education and Research Conference</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author> Bernhardt</author>
    <author>M. Heigl</author>
    <author>P. Viehhauser</author>
    <author>P. Zentgraf</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>sensors</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>aircraft instrumentation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>data acquisition</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>liquid crystal displays</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>668</id>
    <completedYear>2011</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-04-25</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Setup for Locating PV-Cell Surface Defects Through ISC Measurements</title>
    <parentTitle language="eng">Proceedings of the 37th ISTFA 2011</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Martin Versen</author>
    <author>S. Shankar</author>
    <author>S. Enimidisetty</author>
    <author>A. Bernhardt</author>
    <author>B. Srinivasan</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Photovoltaik</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PV-Cell defects</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>ISC Measurements</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>747</id>
    <completedYear>2010</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-05-07</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">PREPARING THE GPS-EXPERIMENT FOR THE SMALL GEO MISSION</title>
    <abstract language="eng">This paper deals with the preparation of the Small GEO mission and the accommodation of a GPS receiver as an experiment. The expected benefits of using the GPS receiver for Small GEO are explained. The feasibility of using GPS for position determination is investigated by simulation using a MosaicGNSS receiver, which was stimulated by a Spirent RF signal generator. A procedure, how to evaluate flight data on ground is outlined. Success criteria of the experiment and the minimal size of the downlink stream required and reserved for the receiver TM are presented.</abstract>
    <parentTitle language="eng">33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Zentgraf</author>
    <author>S. Berge</author>
    <author>C. Chasset</author>
    <author>H. Filippi</author>
    <author>E. Gottzein</author>
    <author>I. Gutiérrez-Cañas</author>
    <author>M. Hartrampf</author>
    <author>P. A. Krauss</author>
    <author>C. Kuehl</author>
    <author>B. Lübke- Ossenbeck</author>
    <author>M. Mittnacht</author>
    <author>O. Montenbruck</author>
    <author>C. Müller</author>
    <author>P. Rueda Boldo</author>
    <author>A. Truffi</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>GPS</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>geosynchronous mission</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Small GEO telecommunications satellite</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>466</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-28</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Holzoberflächen an Kunststoffteilen</title>
    <parentTitle language="deu">Zeitschrift Kunststoffe</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>Markus Hartmann</author>
    <author>Simon Barth</author>
    <author>Michael Schemme</author>
    <author>Andreas Michanickl</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Holzoberflächen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kunststoffteile</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
  <doc>
    <id>468</id>
    <completedYear>2016</completedYear>
    <publishedYear/>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>contributiontoperiodical</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-03-28</completedDate>
    <publishedDate>2018-06-04</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Einen Bund eingehen</title>
    <parentTitle language="deu">Bauen mit Holz</parentTitle>
    <enrichment key="review.accepted_by">2</enrichment>
    <author>Peter Karlinger</author>
    <author>Simon Barth</author>
    <author>Markus Hartmann</author>
    <author>Andreas Michanickl</author>
    <author>Michael Schemme</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Holzbau</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">Fakultät für Ingenieurwissenschaften</collection>
    <thesisPublisher>Technische Hochschule Rosenheim</thesisPublisher>
  </doc>
</export-example>
