@article{FicklerOtt2021, author = {Fickler, K. and Ott, Holly C.}, title = {Softwareauswahl meistern Teil 2: Doppelte Datenpflege klug vermeiden}, series = {HK - Holz- und Kunststoffverarbeitung}, volume = {56}, journal = {HK - Holz- und Kunststoffverarbeitung}, number = {5}, publisher = {DRW-Verlag}, pages = {80 -- 83}, year = {2021}, language = {de} } @article{RuppeltOttFickler2023, author = {Ruppelt, M. and Ott, Holly C. and Fickler, K.}, title = {Software-Landschaft in der M{\"o}belbranche - Teil 1}, series = {HK - Holz- und Kunststoffverarbeitung}, volume = {58}, journal = {HK - Holz- und Kunststoffverarbeitung}, number = {06}, publisher = {DRW-Verlag}, pages = {76 -- 79}, year = {2023}, language = {de} } @article{RuppeltOttFickler2024, author = {Ruppelt, M. and Ott, Holly C. and Fickler, K.}, title = {Modularen Systemen geh{\"o}rt die Zukunft - Teil 2}, series = {HK - Holz- und Kunststoffverarbeitung}, volume = {59}, journal = {HK - Holz- und Kunststoffverarbeitung}, number = {01}, publisher = {DRW-Verlag}, pages = {80 -- 83}, year = {2024}, language = {de} } @techreport{StaussOrromHaegeleetal.2010, author = {Stauß, Kilian and Orrom, James and H{\"a}gele, Rainer and Wamsganß, Matthias}, title = {Forschungsbericht Segelyacht »YSA 17«}, organization = {48}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-26411}, year = {2010}, abstract = {Im Winter 2008/2009 entstand ein Kontakt zwischen dem Bootsbauer Sven Akermann mit seiner Firma YSA Yachtbau Sven Akermann GmbH in Schechen und Prof. Kilian Stauss an der Technischen Hochschule Rosenheim, Fakult{\"a}t f{\"u}r Innenarchitektur, Architektur und Design, Fachgebiet »Interior Design«. Sven Akermann hatte gerade einen neuen Bootstyp entwickelt, die »YSA 10«, eine flache, leichte, steife und offene Hochleistungsregatta-Segelyacht mit 10 Metern L{\"a}nge. Diese war bereits hocherfolgreich in der vorhergehenden Regatta-Saison gesegelt worden. Das Forschungsprojekt sollte sich mit einem m{\"o}glichen Nachfolger zur »YSA 10«, mit dem Titel »YSA 17«, befassen. Anhand der »YSA 17« sollte untersucht werden, wie man sehr leichte und steife Innenr{\"a}ume mit hohem Komfort von Grund auf neu entwickeln kann. Umsetzung Ein Yachtprojekt mit Studierenden aus dem Bereich Innenarchitektur durchzuf{\"u}hren, war aus mehreren Gr{\"u}nden nicht einfach. Erstens hatte niemand von den Studierenden Segelerfahrung oder kannte Segelyachten von innen. Zweitens sind die Planungsmethoden und Entwurfswerkzeuge in der Architektur und Innenarchitektur auf Geb{\"a}ude ausgerichtet und nicht auf hochtechnische Produkte wie eine Hochleistungssegelyacht. Und drittens muss ein solches Projekt in Vormodellen und im Endmodell im Maßstab 1:1 ausgef{\"u}hrt werden, damit man Erkenntnisse {\"u}ber den Raum und die sich in diesem Raum bewegenden Menschen gewinnt. Ein Raummodell in dieser Dimension wurde an der Fakult{\"a}t f{\"u}r Innenarchitektur aber bis dahin noch nie umgesetzt. Auf der positiven Seite standen hoch motivierte Auftraggeber, einerseits Herr Dr. Bernd Schottdorf mit seiner Firma Carbon Großteile in Wallerstein, und andererseits Herr Sven Akermann mit der Firma YSA Yachtbau in Wasserburg am Bodensee. Beide wollten ein sehr zukunftsweisendes Forschungsprojekt mit der Technischen Hochschule Rosenheim durchf{\"u}hren und stellten ein großz{\"u}giges Projektbudget auf. Zudem konnte das Projekt im sogenannten »Design Research Labor« der Fakult{\"a}t f{\"u}r Innenarchitektur, Architektur und Design platziert werden, einer großen, ebenerdigen Halle im Werkstattgel{\"a}nde. Was war die Ausgangslage des Projektes? Segelyachten dieser Art und dieses Anspruches sind Hochleistungs-Sportger{\"a}te, die jede Art von Windbewegung sofort in Vortrieb umsetzen sollen. Dazu muss die Gesamtkonstruktion vor allem sehr leicht und zugleich maximal steif sein. Also werden Rigg und Rumpf aus sehr leichten und festen Materialien gebaut, in diesem Fall ein Sandwich aus Sichtkohlefaserlaminaten und bestimmten Schaumkernen. H{\"a}tte die Yacht allein die Funktion, Regatten zu gewinnen, w{\"a}re kein Forschungsprojekt mit unserer Fakult{\"a}t notwendig gewesen. Aber eine solche Yacht hat neben ihrer technisch-sportlichen Funktion auch eine repr{\"a}sentative: Sie zeigt den Status des Besitzers an. Zudem m{\"o}chte der Besitzer eines solchen Bootes zumindest zeitweise im Hafen wie auf See auf der Yacht anwesend sein und w{\"u}nscht sich dort {\"A}sthetik und Komfort, die weit {\"u}ber die Maßst{\"a}be von reinen Regatta-Yachten hinausgehen. Hier setzte das Forschungsprojekt an: Was bedeutet Luxus, Status und Repr{\"a}sentation bei einer solchen Yacht? Welche Funktionen m{\"u}ssen in einen solchen Innenraum integriert werden? Welche Materialien bieten neue M{\"o}glichkeiten und kommunizieren gleichzeitig den technischen Anspruch des Bootes? Wie integriert man alle diese Funktionen in der Weise, sodass sie nicht addierte Nachteile, sondern integrierte Vorteile darstellen? Die L{\"o}sung lag darin, alle Elemente als strukturell wirksam zu begreifen und die gesamte Gestaltung darauf auszurichten.}, language = {de} } @article{PschererKrommes2024, author = {Pscherer, Theresa and Krommes, Sandra}, title = {LCA standards for environmental product assessments in the bioeconomy with a focus on biogenic carbon: A systematic review}, series = {International Journal of Life Cycle Assessment}, journal = {International Journal of Life Cycle Assessment}, publisher = {Springer Nature}, address = {Berlin}, doi = {https://doi.org/10.1007/s11367-024-02387-7}, pages = {1 -- 23}, year = {2024}, abstract = {Purpose Climate change mitigation is one of the priorities of the European Bioeconomy Strategy (BES). In this regard, renewable raw materials are a crucial resource, as they help to substitute fossil resources and reduce greenhouse gas (GHG) emissions by storing biogenic carbon (C). To control the environmental impact of the European BES, the life cycle assessment (LCA) is the preferred method. Standards provide guidance for LCA. This review aims to present the state of the art of LCA-related standards, focusing on the assessment of biogenic C and its global warming potential (GWP) to evaluate them for decision-making with regard to the transition to a bioeconomy (BE) and climate change mitigation. Methods A systematic review is conducted using the database Nautos to reveal the relevant standards guiding LCA in the BE. In an iterative process, criteria for a comparative analysis are defined. The eligible standards are then qualitatively analysed and compared based on criteria previously derived in the iterative process. Results and discussion In the context of LCA and bio-based products, 13 documents are identified. Differences are revealed in the accounting of biogenic C flows, the calculation of the duration of biogenic C storage and the biogenic C content as well as the consideration of substitution effects. Furthermore, the standards do not provide any information on the assessment of biogenic C in the circular economy so far. Conclusion The importance of biogenic C aspects in LCA has been reflected in the standards over the last 20 years. However, further research is needed to harmonise the different aspects and integrate new relevant ones related to biogenic C and BE to support decision-making for the transition to a BE. This becomes more important as new legislation refers to LCA standards as the preferred assessment method.}, language = {en} } @techreport{StaussHaegele2009, author = {Stauß, Kilian and H{\"a}gele, Rainer}, title = {Forschungsbericht »Minimax«}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-26501}, pages = {36}, year = {2009}, abstract = {Die Minimax Mobile Services GmbH \& Co. KG in Bad Urach trat zum Beginn des Jahres 2008 an die Fakult{\"a}t f{\"u}r Innenarchitektur, Architektur und Design mit dem Wunsch eines Forschungsprojektes heran. Untersucht werden sollte, ob und wie sich die Integration von Handfeuerl{\"o}schern in die Innenarchitektur und Architektur verbessern ließe. Es war bei dieser Fragestellung offen, ob das Produkt an sich oder der Prozess der Integration in die Planung verbessert werden sollte. Umsetzung Die Studierenden entwickelten - teils in Einzelarbeit, teils im Team - neue Ans{\"a}tze und setzten diese als Designmodelle im Maßstab 1:1 um. Es zeigte sich deutlich, dass sich sowohl Ergonomie und Handhabung als auch {\"A}sthetik und Architekturintegration des Ausgangsproduktes deutlich verbessern lassen.}, language = {de} } @techreport{Stauss2008, author = {Stauß, Kilian}, title = {Forschungsbericht »SKINPLEX® - zeropower® Switch«}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-26515}, pages = {32}, year = {2008}, abstract = {F{\"u}r die in Wessling ans{\"a}ssige Firma IDENT Technology AG wurde im Sommersemester 2008 ein Forschungsprojekt mit Studierenden des 7. Semesters an der Fakult{\"a}t f{\"u}r Innenarchitektur, Architektur und Design durchgef{\"u}hrt. Ziel war es, Anwendungen f{\"u}r eine neue, ber{\"u}hrungslose Schaltertechnologie zu finden und zu gestalten. Arbeitsfelder waren dabei erstens Cockpits von Automobilen, zweitens sogenannte »Weiße Ware« wie K{\"u}hlschr{\"a}nke, Waschmaschinen oder Herde, und drittens grunds{\"a}tzliche Untersuchungen zum Thema der gestischen Steuerung von Maschinen. Umsetzung Die Studierenden bauten aufgrund ihrer Konzeptionen und Entw{\"u}rfe Prototypen im Maßstab 1:1 und pr{\"a}sentierten diese dem Auftraggeber am Ende des Semesters.}, language = {de} } @inproceedings{SeligerLeirich2024, author = {Seliger, Norbert and Leirich, Nico}, title = {Compliant Mechanism based Planar Inductors for Reconfigurable Magneto-Inductive Wave Devices}, series = {18th International Congress on Artificial Materials for Novel Wave Phenomena - Metamaterials 2024}, booktitle = {18th International Congress on Artificial Materials for Novel Wave Phenomena - Metamaterials 2024}, publisher = {IEEE}, address = {Crete}, isbn = {979-8-3503-7349-3}, doi = {10.1109/Metamaterials62190.2024.10703322}, pages = {X-243 -- X-245}, year = {2024}, abstract = {A reconfigurable planar inductor based on bistable compliant mechanism is proposed. Flexible snapping of wire elements is used for modification of the loop area and self inductance as well as for the mutual coupling between laterally arranged multiple inductors in a magneto-inductive wave (MIW) device. A mechanical model is presented building the basis for an analytical inductance model. The bistable reconfigurability is demonstrated experimentally and confirmed by numerical simulation results.}, language = {en} } @inproceedings{SeligerLeirich2024, author = {Seliger, Norbert and Leirich, Nico}, title = {Reconfigurable Board-to-Board Interconnect Utilizing Bistable Compliant Ribbon Wires}, series = {14th International Workshop on the Electromagnetic Compatibility of Integrated Circuits (EMC Compo)}, booktitle = {14th International Workshop on the Electromagnetic Compatibility of Integrated Circuits (EMC Compo)}, publisher = {IEEE}, address = {Turin}, isbn = {979-8-3315-0462-5}, doi = {10.1109/EMCCompo61192.2024.10742066}, pages = {211 -- 215}, year = {2024}, abstract = {We propose a printed circuit board (PCB) interconnection utilizing elastically deformed ribbon wires. The wire deflection is designed as a bistable snapping mechanism, which enables post-assembly tuning of the geometry. Hence, a reconfigurable inductance is obtained, easing impedance matching and supporting signal integrity. Analytical solutions for partial and mutual inductance of buckled wires are developed, which are successfully validated by magneto-quasistatic field simulations and by experiments on a test structure for frequencies ranging from 100kHz to 100MHz. We demonstrate a tunable loop inductance from 25nH to 50nH at 10MHz.}, language = {de} } @article{BoschertBhimaniZehneretal.2025, author = {Boschert, Andreas and Bhimani, Bhavya and Zehner, Mike and Kaspar, Severin and Schnabel, Frank and Hammer, Annette and Schmidt, Thomas}, title = {Analyse der PV-Ertr{\"a}ge in Deutschland: Ein Blick auf das Jahr 2024}, series = {Sonnenenergie}, volume = {2025}, journal = {Sonnenenergie}, number = {1/2025}, publisher = {Deutsche Gesellschaft f{\"u}r Sonnenenergie}, pages = {18 -- 20}, year = {2025}, language = {de} } @inproceedings{PueschelSeliger2025, author = {P{\"u}schel, Maximilian and Seliger, Norbert}, title = {Multiple-Frequency Three Coil Inductive Power Transmission with Non-Linear Relay Resonator}, series = {Proceedings Southeastcon 2025}, booktitle = {Proceedings Southeastcon 2025}, publisher = {IEEE}, isbn = {979-8-3315-0484-7}, issn = {1558-058X}, doi = {10.1109/SoutheastCon56624.2025.10971670}, pages = {34 -- 39}, year = {2025}, abstract = {We propose near-field inductive power transfer with three coils in the frequency range of a few MHz. The relay coil is part of a non-linear resonator having a diode connected in parallel to the resonant capacitor. We achieve power transfer at multiple frequencies which can be tuned by the input power level and mutual coupling between the coils. Higher harmonic generation is found dominant at lower input power, whereas subharmonic generation (period doubling and period quadrupling) is observed at high levels. Power transfer at subharmonics reveals robustness against level perturbations due to pronounced amplitude hysteresis effect. A circuit simulation based on standard non-linear diode SPICE models confirms the experimental results which are obtained on a demonstration prototype.}, language = {en} } @inproceedings{YilmazMariAsametal.2025, author = {Yilmaz, Tugce and Mari, Jorge and Asam, Johann and Kirner, Michael and List, Andreas and Fantauzzo, Lucia and Seliger, Norbert}, title = {AC Cycling Testing of SiC MOSFET Power Module}, series = {Proccedings International exhibition and conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM 2025)}, booktitle = {Proccedings International exhibition and conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM 2025)}, publisher = {VDE VERLAG GMBH}, address = {Berlin}, isbn = {978-3-8007-6541-6}, doi = {10.30420/566541341}, pages = {2562 -- 2567}, year = {2025}, abstract = {This paper details the development of an accelerated AC cycling test bench for evaluating the aging mechanisms of SiC MOSFET power modules. Contrary to classical HTGS and DGS which only exercise gate source stresses the AC Cycler switched under high voltage and current. Operating for about 235 hours, the system maintained stable thermal conditions thanks to an integrated cooling system. Key precursors of aging, such as increases in threshold voltage and on-state resistance were identified using static characterization curve tracer before and after the test. Gate charge and Vdson were also measured on-line with specially developed gate drivers.}, language = {en} } @inproceedings{Seliger2025, author = {Seliger, Norbert}, title = {Introducing Environmental Sustainability in an RF and EMC Lab Course Utilizing Reusable, Recyclable and Biodegradable Circuits}, series = {Proceedings IEEE educon 2025}, booktitle = {Proceedings IEEE educon 2025}, publisher = {IEEE}, doi = {10.1109/EDUCON62633.2025.11016365}, pages = {9}, year = {2025}, abstract = {We propose to introduce environmental sustainability in a radio frequency (RF) and electromagnetic compatibility (EMC) laboratory course for an electrical engineering bachelor's program utilizing reusable, easily recyclable and ecologically harmless (biodegradable) circuits. Our concept is based on the replacement of state-of-the-art printed circuit boards by substrates with mechanically structured adhesive Cu and Zinc films. Furthermore, organic based circuit carriers can be substituted by biodegradable paper substrates. As an example for the RF lab, we discuss the design, simulation and experimental characterization of a microwave low-pass filter with 1.2GHz cut-off frequency. Secondly, for an EMC lab we suggest a prototype for power integrity (PI) studies based on the current imbalance method for reducing common mode radiated emission. As a novel feature during the lab course, the instructor in addition gives a lecture highlighting the electronic waste challenge, which is accompanied by group discussions on sustainability and recycling. As a final lab course task students are asked to disassemble the boards or prepare them for reuse, followed by material sorting and submission to recycling institutions.}, language = {en} } @inproceedings{SeligerLeirich2025, author = {Seliger, Norbert and Leirich, Nico}, title = {Reconfigurable single-layer air coil inductor with bistable compliant windings}, series = {Proceedings EPE 25}, booktitle = {Proceedings EPE 25}, publisher = {EPE Association}, doi = {10.34746/epe2025-0012}, pages = {10}, year = {2025}, abstract = {We present an air coil with bistable compliant single layer windings. Due to stable elastic snapping deformation of wire segments, the self-inductance of the air coil can be precisely varied in multiple steps. A numerical and analytical design methodology is proposed and successfully validated by magneto-quasi-static field simulations and experiments on prototypes.}, language = {en} } @misc{SchoenauSchoenauDaumeetal.2024, author = {Sch{\"o}nau, Maximilian and Sch{\"o}nau, Elisabeth and Daume, Darwin and Panhuysen, Markus and Schulze, Achim and H{\"u}ttl, Bernd and Landes, Dieter}, title = {Improved Sampling of IV Measurements}, series = {Proceedings of the 41st EU PVSEC}, journal = {Proceedings of the 41st EU PVSEC}, publisher = {Proceedings of the 41st EU PVSEC}, doi = {10.4229/EUPVSEC2024/3AV.3.50}, pages = {3}, year = {2024}, abstract = {The measurement of IV curves is the most important characterization technique of photovoltaic devices. This work seeks to determine a fair sampling rate for IV curves. Traditional sampling methods, such as using equidistant voltage steps, result in biased data by over- and undersampling the measurement at different voltages, which affect critical evaluations such as maximum power point (MPP) determination as well as series and shunt resistance estimation. Therefore, an adaptive sampling approach based on calculating the arc length of the IV curve is proposed, aiming to distribute data points equidistantly along the curve. This method is intended to provide a more balanced representation of the measurement data across all segments of the curve. The results indicate that using this adaptive approach, the measurement points can be significantly reduced at lower voltages while maintaining essential data density at key characteristics such as the MPP, facilitating faster and more accurate assessments.}, language = {en} } @techreport{MeckingKruseWinteretal.2017, author = {Mecking, Simon and Kruse, Tobias and Winter, Christoph and Schanda, Ulrich}, title = {Vibroakustik im Planungsprozess f{\"u}r Holzbauten - Modellierung, numerische Simulation, Validierung, Teilprojekt 3: Parameterentwicklung und SEA-Modellierung, Schlussbericht}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-4861}, year = {2017}, abstract = {Auf Basis empirischer Daten wurde die Diffusit{\"a}t des K{\"o}rperschallfeldes von Brettsperrholz-Bauteilen in realistischer Gr{\"o}ße beschrieben und Verteilungssch{\"a}tzungen in Abh{\"a}ngigkeit der verwendeten Antwortanzahl durchgef{\"u}hrt. Ein n{\"a}herungsweise diffuses K{\"o}rperschallfeld liegt im Beispiel nur in einigen Terzb{\"a}ndern im mittleren Frequenzbereich vor. Damit ist eine Energiebestimmung mit wenigen Antwortpositionen nur dort m{\"o}glich. Die Energiebestimmung {\"u}ber die Schnelle ist bei tiefen Frequenzen f{\"u}r einige Frequenzb{\"a}nder ohne Moden nicht geeignet, da hier die Voraussetzung nicht gegeben ist, dass die kinetische gleich der potenziellen Energie ist. Hochfrequent hat der Krafteinleitungsort bezogen auf die Elementst{\"o}ße Einfluss auf die Antwortstreuungen. Dar{\"u}ber hinaus ist bei tiefen wie auch bei sehr hohen Frequenzen eine hohe Antwortanzahl notwendig.}, language = {de} } @techreport{BietzHuberMeckingetal.2020, author = {Bietz, Heinrich and Huber, Anton and Mecking, Simon and Rabold, Andreas and Schmelzer, Martin and Sgrieß, Daniel and Wittstock, Volker}, title = {Mehr als nur D{\"a}mmung - Zusatznutzen von D{\"a}mmstoffen aus nachwachsenden Rohstoffen (NawaRo-D{\"a}mmstoffe), Schlussbericht zum Arbeitsbereich 2 Schallschutz}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-31201}, pages = {397}, year = {2020}, abstract = {Der Arbeitsbereich 2 des Verbundvorhabens hatte als Ziel, die Anwendbarkeit von D{\"a}mmstoffen aus nachwachsenden Rohstoffen unter dem Aspekt des Schallschutzes deutlich zu erh{\"o}hen. Ein zentrales technisches Ergebnis des Projektes stellt der erweiterte Bauteilkatalog f{\"u}r Holzbauteile dar, der eine umfangreiche Sammlung an Planungsdaten bietet. Dieser wurde auf Basis der Analyse und Aufbereitung vorhandener Messdaten sowie der im Projekt durchgef{\"u}hrten Pr{\"u}fungen erstellt. Innerhalb des Projektes wurden • 45 Deckenaufbauten und • 10 Wandkonstruktionen hinsichtlich ihrer schalltechnischen Eigenschaften untersucht. Dabei wurden Holztafelkonstruktionen und Massivholzkonstruktionen ber{\"u}cksichtigt. Die ermittelten Werte zeigen, dass mit den Deckenaufbauten beim Einsatz von Holzfaser-Trittschalld{\"a}mmplatten sehr gute Ergebnisse erreichbar sind. Bei entsprechender Gesamtkonstruktion k{\"o}nnen somit auch mit steiferen NawaRo-D{\"a}mmplatten die Zielwerte f{\"u}r Trenndecken eingehalten werden. Neben der Entwicklung dieser speziell f{\"u}r NawaRo-D{\"a}mmstoffe optimierten Aufbauten, konnte f{\"u}r den gesamten Bauteilkatalog eine {\"O}ffnung f{\"u}r Hohlraumd{\"a}mmstoffe aus nachwachsenden Rohstoffen erreicht werden. NawaRo-D{\"a}mmstoffe zur Hohlraumd{\"a}mpfung sollten dabei einen l{\"a}ngenbezogenen Str{\"o}mungswiderstand zwischen 5 kPa s/m² und 50 kPa s/m² und eine offene Porosit{\"a}t gr{\"o}ßer als 0,9 (entspricht bei den meisten untersuchten D{\"a}mmstoffen etwa einer Rohdichte ≤ 130 kg/m³) aufweisen. Zus{\"a}tzliche Messungen mit h{\"o}herer fl{\"a}chenbezogener Masse der Unterdecke zeigten den positiven Einfluss von brandschutz-technisch erforderlichen Zusatzbeplankungen gerade bei den besonders interessierenden tiefen Frequenzen. Ein wissenschaftliches Ergebnis des Projektes ist in der Weiterentwicklung der Simulationsmodelle f{\"u}r die Schall{\"u}bertragung zu sehen. Hierzu konnten die semianalytischen Modelle f{\"u}r die Ber{\"u}cksichtigung der Materialeigenschaften unterschiedlicher Hohlraumd{\"a}mmstoffe erweitert werden. Als zweites Simulationsmodell wurde die Finite-Elemente-Methode f{\"u}r die Berechnung der Schalld{\"a}mmung eingesetzt. F{\"u}r die Simulation wurde ein Massivholz-Wandelement mit W{\"a}rmed{\"a}mm-Verbund-System als Außenwand modelliert. Diese Außenwandkonstruktion ist von besonderem Interesse, da sie im mehrgeschossigen Wohnungsbau gerne verwendet wird, aber sowohl im Brandschutz als auch im Schallschutz noch Optimierungsbedarf aufweist.}, language = {de} } @techreport{KohrmannVoeltlMuelleretal.2014, author = {Kohrmann, M. and V{\"o}ltl, R. and M{\"u}ller, G. and Schanda, Ulrich and Buchschmid, M.}, title = {Abschlussbericht zum AiF Forschungsvorhaben "VibWood". Planungshilfen zur schall- und schwingungstechnischen Beschreibung von Holzdecken und zur Bewertung und Dimensionierung von angepassen Schwingungsschutzsystemen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-5235}, year = {2014}, language = {de} } @inproceedings{KrommesHuberPschereretal.2025, author = {Krommes, Sandra and Huber, Gretel and Pscherer, Theresa and Nemeth, Isabell}, title = {Circular economy in life cycle costing: a literature review in the construction sector}, series = {Journal of Physics: Conference Series}, booktitle = {Journal of Physics: Conference Series}, publisher = {IOP Science}, doi = {10.1088/1742-6596/3140/13/132012}, pages = {1 -- 7}, year = {2025}, abstract = {Circular economy (CE) has become important in reducing the environmental impact of the construction sector. For the transformation from linear to CE, decision support tools and methods are needed to assess and promote CE for constructions. With regard to sustainable financial decisions, life cycle costing (LCC) is the preferred method. However, the LCC approaches and their application in CE research differ. Based on a systematic literature review, the relevance of refurbishment in operation, reuse, recycling and disposal at end-of-life (EoL) in LCC is assessed. As a result, LCC has gained relevance in the construction sector, but CE plays a subordinate role in LCC applications. Costs or benefits of CE are often neglected. However, some research have shown that refurbishment as well as reuse and recycling can outweigh higher initial cost over lifetime. The internalisation of environmental and social impacts or even benefits are also rare. In particular, there is a lack of research on how to internalise the environmental benefits of refurbishment, reuse and recycling or how to effectively incentivise higher CE efforts in LCC in order to encourage decision-making in construction towards CE.}, language = {en} } @article{MoroneVieiraLangeetal.2026, author = {Morone, Piergiuseppe and Vieira, Helena and Lange, Lene and Meer, Yvonne Van der and Penttil{\"a}, Merja and Dragicevic, Arnaud and Koukios, Emmanuel and Krommes, Sandra and Alvarino Pereira, Teresa and Vincevica-Gaile, Zane and Vidarsson, Jonas and Zorpas, Antonis A. and Zimmermannova, Jarmilla and Zimniewska, Malgorzata and O'Connor, Kevin E.}, title = {The European Bioeconomy strategy revision: an opportunity to go against the tide and secure a sustainable future}, series = {Cleaner and Circular Bioeconomy}, volume = {13}, journal = {Cleaner and Circular Bioeconomy}, number = {100204}, publisher = {Elsevier}, address = {Cleaner and Circular Bioeconomy}, doi = {10.1016/j.clcb.2026.100204}, pages = {1 -- 9}, year = {2026}, abstract = {In today's tense geopolitical landscape, marked by strained relations among major powers and deep-rooted dependence on fossil-based economies, the emerging modern bioeconomy can provide resource independence and resilience, in tandem with economic, social, and environmental benefits, and thus has the potential to underpin a sustainable future. The bioeconomy is a vital cross-cutting meta-sector, but it is not inherently circular or sustainable; without intentional design, it risks becoming a linear, unsustainable replacement of the fossil-based economy. Realising its full promise requires purposeful engineering to address climate change, biodiversity loss, strengthen resource independence, support food security and resilience, create jobs, promote social inclusion, boost competitiveness and autonomy, and improve human, animal, and environmental health. The potential is enormous, but so are the challenges society faces in realising the vision for a biobased, nature-positive future.}, language = {en} } @misc{MeckingScheibengraberKruseetal.2017, author = {Mecking, Simon and Scheibengraber, Markus and Kruse, Tobias and Schanda, Ulrich and Wellisch, Ulrich}, title = {Experimentally based statistical analysis of the vibrational energy of CLT building elements}, series = {24th International Congress on Sound and Vibration, ICSV24, London, United Kingdom, July 2017}, journal = {24th International Congress on Sound and Vibration, ICSV24, London, United Kingdom, July 2017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-4883}, year = {2017}, abstract = {The method is based on a simplified Statistical Energy Analysis(SEA) approach. The energy ratios of various subsystems are the main quantities to predict sound transmission. The method has proven to work sufficiently accurate for masonry and concrete buildings, where the building components like walls, floors etc. can be regarded as rather homogeneous structures. To adapt this method for solid timber constructions it is necessary to prove that basic SEA requirements are fullfilled by orthotropic materials and heterogeneous structures that occur in these building types. In a case study, an isolated T-junction formed by Cross Laminated Timber(CLT) elements is experimentally investigated. The buildings elements are subdivided in segments with typical screwed connections. In the experiments the diffusivity of the vibration field is investigated, using point excitation with a shaker at several positions and many, randomly chosen response positions. MONTE-CARLO simulations are conducted for random but fix-sized subsets of the measured response positions to find the necessary number of response positions for an accurate determination of the vibrational energy. As a result the distribution of the mean velocity levels can be approximated. In a second approach a multiple linear regression model based on the least absolute shrinkage and selection operator(LASSO)is applied, because for lower frequency bands multicollinearity is expected. In the context of linear regression modelling, data-driven methods are used to select optimal subsets of response positions, to get an estimating equation.}, language = {en} }