@article{HummelSchemmeKarlinger2019, author = {Hummel, Sabine and Schemme, Micheal and Karlinger, Peter}, title = {GmbH - Glasfaserhybride mit bester Haftung: Variotherme Temperierung f{\"u}r Organobleche}, series = {Plastverarbeiter}, volume = {07/2019}, journal = {Plastverarbeiter}, number = {07}, publisher = {H{\"u}thig GmbH}, address = {Heidelberg}, pages = {2}, year = {2019}, abstract = {Durch Integrieren der Variothermie k{\"o}nnen Organobleche wirtschaftlich und technisch verbessert zu Hybridbauteilen verarbeitet werden. Somit steigert sich der Wettbewerbsvorteil gegen{\"u}ber konventionellen Werkstoffen weiter. An einer Technische Hochschule wird seit mehr als zehn Jahren intensiv an der Thematik der Verbindungstechnologien sowie den Haftungsmechanismen zwischen endlosfaserverst{\"a}rkten Thermoplasten, den sogenannten Organoblechen, und angespritzten Funktionsstrukturen geforscht. Im Fokus stehen prozesstechnische Einfl{\"u}sse, die die Verbundhaftung der Hybridleichtbaustrukturen erh{\"o}hen.}, language = {de} } @inproceedings{GaussKohrmannMayretal.2016, author = {Gauß, Daniela and Kohrmann, Mathias and Mayr, Andreas R. and Schanda, Ulrich}, title = {Empfangsplattenpr{\"u}fstand aus einer Holzwerkstoffplatte}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2016, 42. Deutsche Jahrestagung f{\"u}r Akustik, Aachen, Deutschland.}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2016, 42. Deutsche Jahrestagung f{\"u}r Akustik, Aachen, Deutschland.}, year = {2016}, language = {de} } @techreport{Schanda2016, author = {Schanda, Ulrich}, title = {Forschung - Entwicklung - Innovation}, year = {2016}, language = {de} } @article{HopkinsFilippoupolitisFerreiraetal.2016, author = {Hopkins, C. and Filippoupolitis, M and Ferreira, N. and V{\"o}ltl, R. and Schanda, Ulrich and Mahn, J. and Krajci, L.}, title = {Vibroacoustic finite element modelling of the low-frequency performance of a solid timber floor formed from dowel-connected joists}, series = {Proceedings of Inter-Noise 2016}, journal = {Proceedings of Inter-Noise 2016}, year = {2016}, abstract = {This paper investigates the prediction of low-frequency impact sound insulation for a solid timber floor formed from dowel-connected joists with Swiss hardwood. A finite element model was developed for the dynamic response of the floor as it is neither homogeneous nor isotropic and has complex connections. With point force excitation, a FEM model for the dynamic response of the floor was validated using experimental modal analysis in the laboratory. Two different FEM models were developed, one using spring connectors and the other using join connectors. Good agreement between FEM and measurements in terms of the Modal Assurance Criterion (MAC) and eigenfrequencies was achieved for the first 14 modes with the spring connector model and for the first 7 modes with the join connector model. However, for the vibroacoustic analysis it was necessary to use the join connector model due to the computational instabilities of the spring model above 100 Hz when it was coupled to the acoustic medium. With mechanical excitation the radiated sound power from the underside of the timber floor was measured with sound intensity in order to calculate the radiation efficiency. Comparison of measurements and FEM showed reasonable agreement between 20Hz and 200Hz}, language = {en} } @inproceedings{KohrmannBuchschmidSchandaetal.2016, author = {Kohrmann, M. and Buchschmid, M. and Schanda, Ulrich and M{\"u}ller, G.}, title = {A FEM-based planning tool for the vibro-acoustic design of wooden floors at low frequencies}, series = {Proceedings of Inter-Noise 2016}, booktitle = {Proceedings of Inter-Noise 2016}, year = {2016}, abstract = {Within the scope of the recently finished cooperate research project "VibWood" at Technical University of Munich and Rosenheim University of Applied Sciences, fully parametrized numerical models for lightweight wooden floor constructions have been developed and calibrated by experimental modal analyses. Based on a vast parametric study including floating floors and suspended ceilings a database of narrowband sound power levels in the frequency range up to 125 Hz for a wide range of floor dimensions has been set up. A procedure will be presented on how to process the numerical data and derive single number values that allow a comparison to the standardized rating of impact sound insulation according to DIN EN ISO 717-2. The derived data is implemented into a graphical user interface (GUI). This GUI is available for free. The database is open for additional geometries and will be enhanced by different constructions in the near future.}, language = {en} } @article{SchandaKonle2016, author = {Schanda, Ulrich and Konle, E.}, title = {Vertraulichkeit und ungest{\"o}rtes Arbeiten mit Raum-in-Raum-Systemen in offenen B{\"u}rolandschaften}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2016}, language = {de} } @article{KruseSchanda2016, author = {Kruse, T. and Schanda, Ulrich}, title = {Ausbreitungsd{\"a}mpfung von K{\"o}rperschall in plattenf{\"o}rmigen Strukturen}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2016}, abstract = {In der Bauakustik werden bei der Berechnung der schalltechnischen Eigenschaften von Bauteilen ausreichend diffuse K{\"o}rperschallfelder angenommen. In der Holzmassivbauweise mit modernen Holzwerkstoffen, wie Brettsperrholz, ist die innere D{\"a}mpfung der Bauteile im Vergleich zum Mauerwerks- und Betonbau h{\"o}her, somit die Ausbildung eines K{\"o}rperschall-Diffusfeldes nicht gesichert. Zum Verst{\"a}ndnis der Ausbildung des K{\"o}rperschallfeldes ist die Messung der Ausbreitungsd{\"a}mpfung hilfreich. Diese erfolgt {\"u}ber eine Messung des Schnellepegels als Funktion des Abstandes zum Anregungspunkt. F{\"u}r einen Vergleich mit theoretischen Modellen muss ebenso der Gesamtverlustfaktor bestimmt werden. In diesem Beitrag werden Messergebnisse der K{\"o}rperschallfelder in unterschiedlichen plattenf{\"o}rmigen Bauteilen und der Vergleich zu theoretischen Ans{\"a}tzen pr{\"a}sentiert. Zun{\"a}chst werden homogene Strukturen am Beispiel von Metall- und Gipskartonplatten GKB betrachtet. Diese Messungen erfolgten an frei h{\"a}ngenden Elementen in unterschiedlichen Dimensionen bei punktf{\"o}rmiger Anregung. Im Anschluss wird ein Brettsperrholz-Bauteil BSH als orthotropes Material bei Punkt- sowie bei Linienanregung betrachtet.}, language = {de} } @article{MayrGibbs2016, author = {Mayr, Andreas R. and Gibbs, Barry}, title = {Approximate method for obtaining source quantities for calculation of structure-borne sound transmission into lightweight buildings}, series = {Applied Acoustics}, volume = {2016}, journal = {Applied Acoustics}, number = {110}, pages = {81 -- 90}, year = {2016}, abstract = {An approximate approach is described, for obtaining the source quantities required for the calculation of structure-borne sound power from machines into supporting lightweight building elements. The approach is in two stages, which are based on existing international Standards for measurement. The first stage involves direct measurement of the source free velocity at each contact, to give the sum of the square velocities. The second stage is based on the reception plate method and yields the single equivalent blocked force, which approximates the sum of the square blocked forces. The applicability of the source data obtained has been investigated in a case study of a fan unit on a timber joist floor. The approach contains several significant simplifying assumptions and the uncertainties associated with them are considered. For the case considered, the power transmitted into the floor is estimated by the approximate method to within 5 dB of the true value, on average.}, language = {en} } @article{SchoepferHopkinsMayretal.2016, author = {Sch{\"o}pfer, Fabian and Hopkins, Carl and Mayr, Andreas R. and Schanda, Ulrich}, title = {Entwicklung eines SEA-Modells f{\"u}r eine Holzrahmenbauwand mit N+F Beplankungslagen}, series = {DAGA 2016, 42. Deutsche Jahrestagung f{\"u}r Akustik, Aachen, Deutschland}, journal = {DAGA 2016, 42. Deutsche Jahrestagung f{\"u}r Akustik, Aachen, Deutschland}, year = {2016}, abstract = {Holzrahmenbaukonstruktionen stellen in Bezug auf ihre vibro-akustischen Eigenschaften komplexe Systeme dar. Eine Prognose des bei der K{\"o}rperschallanregung durch haustechnische Anlagen erzeugten Schalldruckpegels in angrenzenden R{\"a}umen ist b.d. nicht m{\"o}glich und bedarf entsprechender Modelle. In diesem Beitrag wird die Modellierung einer im Labor aufgebauten Holzrahmenbaukonstruktion unter Verwendung der Statistischen Energieanalyse (SEA) vorgestellt. Die Besonderheit der vorliegenden Konstruktion besteht in ihrem sehr einfachen Aufbau mit beidseitig einschaliger Beplankung durch Spanplatten mit Nut- und Federverbindung (N+F), sowie horizontalen und vertikalen Plattenst{\"o}ßen. In dieser Form weist die Konstruktion einen sehr inhomogenen Aufbau auf. Die Ergebnisse experimenteller Untersuchungen zeigten, dass an den N+F Verbindungen eine signifikante Abnahme der Schwingungsenergie vorliegt. Um diese Erkenntnisse im SEA-Modell zu ber{\"u}cksichtigen, wurden gemessene Kopplungsverluste f{\"u}r die Nut- und Federverbindung verwendet, wohingegen alle weiteren im System ben{\"o}tigten Verlustfaktoren aus Literaturwerten prognostiziert wurden. Ein Vergleich der Ergebnisse aus der SEA-Modellierung mit Messdaten der Schwingschnelle auf den Beplankungslagen sowie der Schalldruckpegel in den Wandhohlr{\"a}umen wird vorgestellt.}, language = {de} } @inproceedings{SchoepferHopkinsMayretal.2016, author = {Sch{\"o}pfer, Fabian and Hopkins, Carl and Mayr, Andreas R. and Schanda, Ulrich}, title = {Modelling structure-borne sound transmission across a timber-frame wall using SEA.}, series = {Proceedings of InterNoise 2016, Hamburg, Germany}, booktitle = {Proceedings of InterNoise 2016, Hamburg, Germany}, year = {2016}, abstract = {This paper concerns the modelling of sound transmission across a timber-frame wall under mechanical excitation by a point force using Statistical Energy Analysis (SEA). The aim is to develop and experimentally validate a model that would be relevant to machinery such as a heating device or a ventilation system that are often connected to such walls. The prediction is compared against measurements on a wall that forms part of a lightweight test-rig in the Laboratory for Sound Measurement (LaSM) at the University of Applied Sciences Rosenheim. A basic timber frame was built with a single layer of tongue and grooved chipboard on each side of the wall. With this configuration the structure represented a lightweight construction with horizontal junctions in addition to the vertical junctions that are more typical with lightweight constructions formed from plasterboard. A series of SEA models were developed with an increasing degree of complexity regarding the partitioning of the structure into subsystems. Additional experimental work was carried out to determine coupling loss factors across the chipboard joints which were then incorporated in the model. The SEA predictions are compared with measured velocities on both leaves and sound pressure levels in the cavities.}, language = {en} }