@misc{TimpteMeckingSchandaetal.2017, author = {Timpte, A. and Mecking, S. and Schanda, Ulrich and Rabold, A.}, title = {Stoßstellend{\"a}mm-Maße von Brettsperrholzkonstruktionen}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-4979}, year = {2017}, abstract = {Ein Ziel des DFG-AiF-Clusterforschungsvorhabens Vibroakustik im Planungsprozess f{\"u}r Holzbauten ist die Reduktion des schalltechnischen Planungsaufwandes bei der Massivholzbauweise. Hierzu soll das Prognoseverfahren der DIN EN 12354 zur Ermittlung der Flanken{\"u}bertragung f{\"u}r Holzbaukonstruktionen angepasst werden. Da es sich bei der Massivholzbauweise um keine starre Verbindungen wie beim Massivbau handelt, ist zur Berechnung der Flanken{\"u}bertragung ein Maß f{\"u}r die Schall{\"u}bertragung an den Stoßstellen erforderlich. Das sogenannte Stoßstellend{\"a}mm-Maß Kij wird u.a. aus der richtungsgemittelten Differenz der Schnellepegel je Bauteil und der K{\"o}rperschallnachhallzeit gebildet, welche nach der DIN EN ISO 10848 messtechnisch zu ermitteln sind. Alternativ wird im Entwurf E DIN EN 12354-1:2016 ein erster Vorschlag zur Berechnung des Stoßstellend{\"a}mm-Maßes f{\"u}r einen T- und einen Kreuz-Stoß in Brettsperrholz aufgef{\"u}hrt. In diesem Beitrag werden Stoßstellend{\"a}mm-Maße unterschiedlich ausgef{\"u}hrter Brettsperrholzkonstruktionen pr{\"a}sentiert und gegen{\"u}bergestellt. Es handelt sich um frequenzabh{\"a}ngige Werte, die von internationalen Laboren gem{\"a}ß DIN EN 10848 f{\"u}r L-, T- und Kreuz-St{\"o}ße ermittelt wurden.}, language = {de} } @misc{MeckingKruseSchanda2015, author = {Mecking, S. and Kruse, T. and Schanda, Ulrich}, title = {Measurement and calculation of sound transmission across junctions of solid timber building elements.}, series = {Proceedings of Euronoise 2015}, journal = {Proceedings of Euronoise 2015}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-5118}, year = {2015}, abstract = {Extended Abstract: The number of multi-storey buildings in timber construction increases continuously. Compared to concrete and brick constructions the planning process of sound insulation of a wooden building causes much higher effort. Reasons are missing planning data and planning tools for sound insulation. Suitable, computer-based tools, which enable a simulation already in an early planning phase of a building, could help to reduce the planning effort significantly. One possibility to calculate the in-situ airborne and impact sound insulation is to combine the Finite Element Method (FEM) and the Statistical Energy Analysis (SEA) in a coupled model, which consider the direct transmission path of the building elements and the flanking transmission paths. The SEA-based calculation of the sound insulation according to EN 12354 requires the vibration reduction indices of the transfer paths at a junction of structural elements. This paper shows actual measurement results of the Operational Vibration Analysis and the vibration reduction indices of coupled Cross Laminated Timber elements. In the process the elastic layers, the pressure and the fasteners were diversified. In addition the modelling of the junction by using a commercial SEA tool will be presented and the comparison of the calculated with the measured results. From this comparison conclusion about the valid frequency domain for the Statistical Energy Analysis will be presented. The results are based on the current status of the research project "Vibroakustik im Planungsprozess f{\"u}r Holzbauten" funded by the German Research Foundation (DFG) and German Federation of Industrial Research Associations (AIF). It is carried out by Technical University Munich, ift Rosenheim and University of Applied Sciences Rosenheim}, language = {en} }